SearcharxivSearch

arXiv subjects

Manfred Steller

Publications and source records attributed to Manfred Steller.

6 recordsLinked to original sources

The Autonomous Data Reduction Pipeline for the CUTE Mission

The Colorado Ultraviolet Transit Experiment (CUTE) is a 6U NASA CubeSat carrying on-board a low-resolution, near-ultraviolet (2479-3306 A) spectrograph. It has a Cassegrain telescope with a rectangular primary to maximize the collecting area, given the shape of the satellite bus, and an aberration correcting grating to improve the image quality, and thus spectral resolution. CUTE, launched on the 27th of September 2021 to a Low Earth Orbit, is designed to monitor transiting extra-solar planets orbiting bright, nearby stars to improve our understanding of planet atmospheric escape and star-planet interaction processes. We present here the CUTE autONomous daTa ReductiOn pipeLine (CONTROL), developed for reducing CUTE data. The pipeline has been structured with a modular approach, which also considers scalability and adaptability to other missions carrying on-board a long-slit spectrograph. The CUTE data simulator has been used to generate synthetic observations used for developing and testing the pipeline functionalities. The pipeline has been tested and updated employing ight data obtained during commissioning and initial science operations of the mission.

astro-ph.IM

Uncovering the true periods of the young sub-Neptunes orbiting TOI-2076

Context: TOI-2076 is a transiting three-planet system of sub-Neptunes orbiting a bright (G = 8.9 mag), young ($340\pm80$ Myr) K-type star. Although a validated planetary system, the orbits of the two outer planets were unconstrained as only two non-consecutive transits were seen in TESS photometry. This left 11 and 7 possible period aliases for each. Aims: To reveal the true orbits of these two long-period planets, precise photometry targeted on the highest-probability period aliases is required. Long-term monitoring of transits in multi-planet systems can also help constrain planetary masses through TTV measurements. Methods: We used the MonoTools package to determine which aliases to follow, and then performed space-based and ground-based photometric follow-up of TOI-2076 c and d with CHEOPS, SAINT-EX, and LCO telescopes. Results: CHEOPS observations revealed a clear detection for TOI-2076 c at $P=21.01538^{+0.00084}_{-0.00074}$ d, and allowed us to rule out three of the most likely period aliases for TOI-2076 d. Ground-based photometry further enabled us to rule out remaining aliases and confirm the $P=35.12537\pm0.00067$ d alias. These observations also improved the radius precision of all three sub-Neptunes to $2.518\pm0.036$, $3.497\pm0.043$, and $3.232\pm0.063$ $R_\oplus$. Our observations also revealed a clear anti-correlated TTV signal between planets b and c likely caused by their proximity to the 2:1 resonance, while planets c and d appear close to a 5:3 period commensurability, although model degeneracy meant we were unable to retrieve robust TTV masses. Their inflated radii, likely due to extended H-He atmospheres, combined with low insolation makes all three planets excellent candidates for future comparative transmission spectroscopy with JWST.

astro-ph.EP

Transit detection of the long-period volatile-rich super-Earth $\nu^2$ Lupi d with $CHEOPS$

Exoplanets transiting bright nearby stars are key objects for advancing our knowledge of planetary formation and evolution. The wealth of photons from the host star gives detailed access to the atmospheric, interior, and orbital properties of the planetary companions. $\nu^2$ Lupi (HD 136352) is a naked-eye ($V = 5.78$) Sun-like star that was discovered to host three low-mass planets with orbital periods of 11.6, 27.6, and 107.6 days via radial velocity monitoring (Udry et al. 2019). The two inner planets (b and c) were recently found to transit (Kane et al. 2020), prompting a photometric follow-up by the brand-new $CHaracterising\:ExOPlanets\:Satellite\:(CHEOPS)$. Here, we report that the outer planet d is also transiting, and measure its radius and mass to be $2.56\pm0.09$ $R_{\oplus}$ and $8.82\pm0.94$ $M_{\oplus}$, respectively. With its bright Sun-like star, long period, and mild irradiation ($\sim$5.7 times the irradiation of Earth), $\nu^2$ Lupi d unlocks a completely new region in the parameter space of exoplanets amenable to detailed characterization. We refine the properties of all three planets: planet b likely has a rocky mostly dry composition, while planets c and d seem to have retained small hydrogen-helium envelopes and a possibly large water fraction. This diversity of planetary compositions makes the $\nu^2$ Lupi system an excellent laboratory for testing formation and evolution models of low-mass planets.

astro-ph.EP

The CHEOPS mission

The CHaracterising ExOPlanet Satellite (CHEOPS) was selected in 2012, as the first small mission in the ESA Science Programme and successfully launched in December 2019. CHEOPS is a partnership between ESA and Switzerland with important contributions by ten additional ESA Member States. CHEOPS is the first mission dedicated to search for transits of exoplanets using ultrahigh precision photometry on bright stars already known to host planets. As a follow-up mission, CHEOPS is mainly dedicated to improving, whenever possible, existing radii measurements or provide first accurate measurements for a subset of those planets for which the mass has already been estimated from ground-based spectroscopic surveys and to following phase curves. CHEOPS will provide prime targets for future spectroscopic atmospheric characterisation. Requirements on the photometric precision and stability have been derived for stars with magnitudes ranging from 6 to 12 in the V band. In particular, CHEOPS shall be able to detect Earth-size planets transiting G5 dwarf stars in the magnitude range between 6 and 9 by achieving a photometric precision of 20 ppm in 6 hours of integration. For K stars in the magnitude range between 9 and 12, CHEOPS shall be able to detect transiting Neptune-size planets achieving a photometric precision of 85 ppm in 3 hours of integration. This is achieved by using a single, frame-transfer, back-illuminated CCD detector at the focal plane assembly of a 33.5 cm diameter telescope. The 280 kg spacecraft has a pointing accuracy of about 1 arcsec rms and orbits on a sun-synchronous dusk-dawn orbit at 700 km altitude. The nominal mission lifetime is 3.5 years. During this period, 20% of the observing time is available to the community through a yearly call and a discretionary time programme managed by ESA.

astro-ph.IM

Colorado Ultraviolet Transit Experiment Data Simulator

The Colorado Ultraviolet Transit Experiment (CUTE) is a 6U NASA CubeSat carrying on-board a low-resolution (R~2000--3000), near-ultraviolet (2500--3300 {\AA}) spectrograph. It has a rectangular primary Cassegrain telescope to maximize the collecting area. CUTE, which is planned for launch in Spring 2020, is designed to monitor transiting extra-solar planets orbiting bright, nearby stars aiming at improving our understanding of planet atmospheric escape and star-planet interaction processes. We present here the CUTE data simulator, which we complemented with a basic data reduction pipeline. This pipeline will be then updated once the final CUTE data reduction pipeline is developed. We show here the application of the simulator to the HD209458 system and a first estimate of the precision on the measurement of the transit depth as a function of temperature and magnitude of the host star. We also present estimates of the effect of spacecraft jitter on the final spectral resolution. The simulator has been developed considering also scalability and adaptability to other missions carrying on-board a long-slit spectrograph. The data simulator will be used to inform the CUTE target selection, choose the spacecraft and instrument settings for each observation, and construct synthetic CUTE wavelength-dependent transit light curves on which to develop the CUTE data reduction pipeline.

astro-ph.IM

CUTE Data Simulator and Reduction Pipeline

The Colorado Ultraviolet Transit Experiment (CUTE) is a 6U NASA CubeSat carrying a low-resolution (R ~3000), near-ultraviolet (255 - 330nm) spectrograph fed by a rectangular primary Cassegrain. CUTE, is planned for launch in spring 2020 and it will monitor transiting extra-solar planets to study atmospheric escape. We present here the CUTE data simulator, which is a versatile tool easily adaptable to any other mission performing single-slit spectroscopy and carrying on-board a CCD detector. We complemented the data simulator with a data reduction pipeline capable of performing a rough reduction of the simulated data. This pipeline will then be updated once the final CUTE data reduction pipeline will be fully developed. We further briefly discuss our plans for the development of a CUTE data reduction pipeline. The data simulator will be used to inform the target selection, improve the preliminary signal-to-noise calculator, test the impact on the data of deviations from the nominal instrument characteristics, identify the best spacecraft orientation for the observation of each target and construct synthetic data to train the science team in the data analysis prior to launch.

astro-ph.IM