arXiv subjects

Manh-Huong Phan

Publications and source records attributed to Manh-Huong Phan.

At least 37 records · Page 2Linked to original sources

arXiv2023

A Disposable Soft Magnetic Ribbon Based Sensor for Corrosion Monitoring

We present a new approach for real-time monitoring of chemical corrosion based on the radio-frequency (RF) impedance technology and soft ferromagnetic ribbons. The impedance (Z) of a commercial magnetic ribbon was measured in real time for 5 mul of drop-casted HNO3 of various concentrations. Variations in the concentration of the drop-casted acid were assessed by considering the difference in Z with and without the acid treatment. We found a large and linear increase in deltaZ and a large linear decrease in measurement time with the acid concentration, which are ideal for developing disposable chemical sensors for strength estimation of corrosive chemicals and for monitoring of a time-dependent chemical corrosion process. Since the ribbon used is commercially available at low cost and the measurement system is quick and low power consuming, the proposed sensor can be used as an easy, quick, and low-cost chemical probe in industries and environmental hazard management purposes.

physics.app-ph↗

arXiv2022

Enhanced Magnetism in Heterostructures with Transition-Metal Dichalcogenide Monolayers

Two-dimensional materials and their heterostructures have opened up new possibilities for magnetism at the nanoscale. In this study, we utilize first-principles simulations to investigate the structural, electronic, and magnetic properties of $\textrm{Fe}/\textrm{WSe}_2/\textrm{Pt}$ systems containing pristine, defective, or doped $\textrm{WSe}_2$ monolayers. The proximity effects of the ferromagnetic Fe layer are studied by considering defective and vanadium-doped $\textrm{WSe}_2$ monolayers. All heterostructures are found to be ferromagnetic, and the insertion of the transition-metal dichalcogenide results in a redistribution of spin orientation and an increased density of magnetic atoms due to the magnetized $\textrm{WSe}_2$. There is an increase in the overall total density of states at the Fermi level due to $\textrm{WSe}_2$; however, the transition-metal dichalcogenide may lose its distinct semiconducting properties due to the stronger than van der Waals coupling. Spin-resolved electronic structure properties are linked to larger spin Seebeck coefficients found in heterostructures with $\textrm{WSe}_2$ monolayers.

cond-mat.mtrl-sci↗

arXiv2022

Design of Core-Shell Structured Magnetic Microwires with Desirable Properties for Multifunctional Applications

Amorphous Co-rich microwires with excellent soft magnetic and mechanical properties produced by melt-extraction technique are emerging as a multifunctional material for a variety of applications ranging from ultrasensitive magnetic field sensors to structural health self-monitoring composites. There is a pressing need for enhancing these properties to make the microwires practical for integration into new technologies. Conventional heat treatments at temperature below crystallization may improve the magnetic softness of an as-quenched amorphous wire, but usually deteriorate the good mechanical characteristic of the wire due to crystallization. To overcome this, we propose a new approach that utilizes the advantages of a multi-step Joule current annealing method to design novel (nanocrystal, amorphous)/amorphous core/shell structures directly from as-quenched amorphous microwires. These results show that the density and size of nanocrystals in the core can be optimized by controlling the Joule current intensity, resulting in the large enhancement of soft magnetic and giant magneto-impedance properties, while the amorphous shell preserves the excellent mechanical strength of the microwire. This study also provides a new pathway for the design of novel core/shell structures directly from rapidly quenched amorphous magnetic materials that are currently exploited in high frequency transformers, sensing and cooling devices.

cond-mat.mtrl-sci↗

arXiv2022

Spin Seebeck effect in iron oxide thin films: Effects of phase transition, phase coexistence, and surface magnetism

Understanding impacts of phase transition, phase coexistence, and surface magnetism on the longitudinal spin Seebeck effect (LSSE) in a magnetic system is essential to manipulate the spin to charge current conversion efficiency for spincaloritronic applications. We aim to elucidate these effects by performing a comprehensive study of the temperature dependence of LSSE in biphase iron oxide (BPIO = alpha-Fe2O3 + Fe3O4) thin films grown on Si (100) and Al2O3 (111) substrates. A combination of temperature-dependent anomalous Nernst effect (ANE) and electrical resistivity measurements show that the contribution of ANE from the BPIO layer is negligible compared to the intrinsic LSSE in the Si/BPIO/Pt heterostructure even at room temperature. Below the Verwey transition of the Fe3O4 phase, the total signal across BPIO/Pt is dominated by the LSSE. Noticeable changes in the intrinsic LSSE signal for both Si/BPIO/Pt and Al2O3/BPIO/Pt heterostructures around the Verwey transition of the Fe3O4 phase and the antiferromagnetic (AFM) Morin transition of the alpha-Fe2O3 phase are observed. The LSSE signal for Si/BPIO/Pt is found to be almost two times greater than that for Al2O3/BPIO/Pt, an opposite trend is observed for the saturation magnetization though. Magnetic force microscopy reveals the higher density of surface magnetic moments of the Si/BPIO film compared to the Al2O3/BPIO film, which underscores a dominant role of interfacial magnetism on the LSSE signal and thereby explains the larger LSSE for Si/BPIO/Pt.

cond-mat.mtrl-sci↗

arXiv2022

Exchange Bias and Interface-related Effects in Two-dimensional van der Waals Magnetic Heterostructures: Open Questions and Perspectives

The exchange bias (EB) effect is known as a fundamentally and technologically important magnetic property of a magnetic bilayer film. It is manifested as a horizontal shift in a magnetic hysteresis loop of a film subject to cooling in the presence of a magnetic field. The EB effect in van der Waals (vdW) heterostructures offers a novel approach for tuning the magnetic properties of the newly discovered single-layer magnets, as well as adds a new impetus to magnetic vdW heterostructures. Indeed, intriguing EB effects have recently been reported in a variety of low-dimensional vdW magnetic systems ranging from a weakly interlayer-coupled vdW magnet (e.g., Fe3GeTe2) to a bilayer composed of two different magnetic vdW materials (e.g., Fe3GeTe2/CrCl3, Fe3GeTe2/FePS3, Fe3GeTe2/MnPS3), to bilayers of two different vdW defective magnets (e.g., VSe2/MoS2), or to metallic ferromagnet/vdW defective magnet interfaces (e.g., Fe/MoS2). Despite their huge potential in spintronic device applications, the physical origins of the observed EB effects have remained elusive to researchers. We present here a critical review of the EB effect and associated phenomena such as magnetic proximity (MP) in various vdW heterostructure systems and propose approaches to addressing some of the emerging fundamental questions.

cond-mat.mtrl-sci↗

arXiv2021

MnP films with desired magnetic, magnetocaloric and thermoelectric properties for a perspective magneto-thermo-electric cooling device

A perspective magneto-thermo-electric cooling device (MTECD) comprising a central magnetocaloric (MC) material (e.g., Gd) sandwiched by two thermoelectric (TE) materials (e.g., MnP) is proposed. The presence of the TE materials in the MTECD guides the heat flow direction and enhances heat pulsation. In this case, the usage of a ferromagnetic TE material that combines large TE with small MC properties within a similar temperature region can enhance the magnetic flux density and heat exchange efficiency. Here, we show that MnP nanorod-structured films with desired magnetic, MC and TE properties are very promising for use in MTECDs. The films were grown on Si substrates at 300, 400 and 500°C using molecular beam epitaxy. The 400 oC sample shows a desired TE and MC combination. A large power factor of 24.06 μW m-1 K-2 is achieved at room temperature. In this temperature region, the film exhibits a small MC effect (-deltaSM ~0.64 J/kg K and deltaTad ~0.3 K at m0H = 2 T) but ferromagnetism that gives rise to the enhanced MC effect of the central MC material. These properties could enable the MTECD to operate at high frequency.

cond-mat.mtrl-sci↗

arXiv2021

Scaling of the thermally induced sign inversion of longitudinal spin Seebeck effect in a compensated ferrimagnet: Role of magnetic anisotropy

We report on a systematic investigation of the longitudinal spin Seebeck effect (LSSE) in a GGG(Gd3Ga5O12)/GdIG(Gd3Fe5O12)/Pt film series exhibiting an in-plane magnetic easy axis with a compensation temperature (T_Comp) that decreases from 270 to 220 K when decreasing GdIG film thickness from 272 to 31 nm, respectively. For all the films, the LSSE signal flips its sign below T_Comp. We demonstrate a universal scaling behavior of the temperature dependence of LSSE signal for our GdIG films around their respective T_Comp. Additionally, we demonstrate LSSE in a 31 nm GdIG film grown on a lattice-mismatched GSGG (Gd3Sc2Ga3O12) substrate that exhibits an out-of-plane magnetic easy axis at room temperature. However, this sample reveals a spin reorientation transition where the magnetic easy axis changes its orientation to in-plane at low temperatures. We observed a clear distinction in the LSSE signal for the GSGG/GdIG(31 nm)/Pt heterostructure, relative to GGG/GdIG(31nm)/Pt showing an in-plane magnetic easy axis. Our findings underscore a strong correlation between the LSSE signal and the orientation of magnetic easy axis in compensated ferrimagnets and opens the possibility to tune LSSE through effective anisotropy.

cond-mat.mtrl-sci↗

arXiv2021

Magnetic and magnetocaloric properties of melt-extracted Mn1.26Fe0.60P0.48Si0.52 microwires

The polycrystalline Mn1.26Fe0.60P0.48Si0.52 microwires were successfully fabricated for the first time by the melt-extraction technique, and their magnetic and magnetocaloric properties were investigated systematically. The structural analysis shows that the microwires possess a hexagonal phase with Fe2P type, with a homogeneous composition distribution. Magnetometry measurements show that the microwires undergo a weak first-order magnetic phase transition at a temperature of 142 K. The maximum magnetic entropy change of the microwires reaches 4.64 Jkg-1K-1 for a field change of 5 T. These low-cost Mn1.26Fe0.60P0.48Si0.52 microwires are promising for active magnetic refrigeration in the liquid nitrogen temperature range.

physics.app-ph↗

arXiv2021

A perspective magnetic bed comprising Gd alloy multi-microwires for energy-efficient magnetic refrigeration

We have designed a new magnetic bed structure with desirable table-like magnetocaloric effect (MCE) by using three kinds of soft ferromagnetic Gd-Al-Co microwire arrays with different Curie temperatures ($T_C$). The $T_C$ interval of these three wires is ~10 K and the designed new structure named Sample A. This sample shows a smooth table-like magnetic entropy change ($ΔS_M$) at high applied field change ($μ_0 ΔH=5 T$) ranging from ~92 K to ~107 K. The maximum entropy change ($-ΔS_M^{\rm max}$) and refrigerant capacity (RC) for Sample A at $μ_0 ΔH=5 T$ are calculated to be ~9.42 Jkg$^{-1}$K$^{-1}$ and ~676 Jkg$^{-1}$. The calculated curves of $-ΔS_M(T)$ and the corresponding experimental data match well with each other, suggesting that the desirable magnetocaloric properties of the microwire arrays can be designed. Simulation shows that the RC values of the designed systems increase when increasing the interval of $T_C$. The table-like MCE and the enhanced heat-transfer efficiency due to the enhanced surface areas of the microwires make this newly designed magnetic bed very promising for use in energy-efficient magnetic refrigerators.

physics.app-ph↗

arXiv2021

Macrospin model of an assembly of magnetically coupled core-shell nanoparticles

Highly sophisticated synthesis methods and experimental techniques allow for precise measurements of magnetic properties of nanoparticles that can be reliably reproduced using theoretical models. Here, we investigate the magnetic properties of ferrite nanoparticles by using theoretical techniques based on Monte Carlo methods. We introduce three stages of sophistication in the macromagnetic model. First, by using tailor-made hamiltonians we study single nanoparticles. In a second stage, the internal structure of the nanoparticle is taken into consideration by defining an internal (core) and external (shell) region, respectively. In the last stage, an assembly of core/shell NPs are considered. All internal magnetic couplings such as inter and intra-atomic exchange interactions or magnetocrystalline anisotropies have been estimated. Moreover, the hysteresis loops of the aforementioned three cases have been calculated and compared with recent experimental measurements. In the case of the assembly of nanoparticles, the hysteresis loops together with the zero-field cooling and field cooling curves are shown to be in a very good agreement with the experimental data. The current model provides an important tool to understand the internal structure of the nanoparticles together with the complex internal spin interactions of the core-shell ferrite nanoparticles.

cond-mat.mes-hall↗

arXiv2021

Spin Canting in Exchange Coupled Bi-Magnetic Nanoparticles: Interfacial Effects and Hard / Soft Layer Ordering

We investigate the spatial distribution of spin orientation in magnetic nanoparticles consisting of hard and soft magnetic layers. The nanoparticles are synthesized in a core / shell spherical morphology where the magnetically hard, high anisotropy layer is CoFe$_2$O$_4$ (CFO) while the lower anisotropy material is Fe$_3$O$_4$ (FO). The nanoparticles have a mean diameter of $\sim$9.2 - 9.6 nm and are synthesized as two variants: a conventional hard / soft core / shell structure with a CFO core / FO shell (CFO@FO) and the inverted structure FO core / CFO shell (FO@CFO). High resolution electron microscopy confirms the coherent spinel structure across the core / shell boundary in both variants while magnetometry indicates the nanoparticles are superparamagnetic at 300 K and develop a considerable anisotropy at reduced temperatures. Low temperature \textit{M vs. H} loops suggest a multi-step reversal process. Temperature dependent small angle neutron scattering (SANS) with full polarization analysis reveals a strong perpendicular plane alignment of the spins near zero field, indicative of spin canting, but the perpendicular alignment quickly disappears upon application of a weak field and little spin ordering parallel to the field until the coercive field is reached. Above the coercive field of the sample, spins orient predominantly along the field direction. At both zero field and near saturation, the parallel magnetic SANS peak coincides with the structural peak, indicating the magnetization is uniform throughout the nanoparticle volume, while near the coercive field the parallel scattering peak shifts to higher momentum transfer (Q), suggesting that the coherent scattering volume is smaller and likely originates in the softer Fe$_3$O$_4$ portion of the nanoparticle.

cond-mat.mes-hall↗

arXiv2021

Strain-modulated helimagnetism and emergent magnetic phase diagrams in highly crystalline MnP nanorod films

We explore strain-modulated helimagnetism in highly crystalline MnP nanorod films grown on Si(100) substrates using molecular beam epitaxy. The strained MnP film exhibits a paramagnetic to ferromagnetic (PM-FM) phase transition at TC ~ 279 K, and the FM to helical phase transition at TN ~ 110 K. The value of TN is greater than TN ~ 47 K for the MnP single crystal, indicating strong strain-modulated helimagnetic states in the MnP nanorod film. The presence of significant thermal hysteresis in the helical phase indicates coexistence of competing magnetic interactions, leading to the first-order metamagnetic transition. Similar to its single crystal counterpart, an anisotropic magnetic effect is observed in the MnP film, which is independently confirmed by magnetic hysteresis loop and radio-frequency transverse susceptibility (TS) measurements. The evolution of screw (SCR) to CONE and FAN phase is precisely tracked from magnetization versus magnetic field/temperature measurements. The temperature dependence of the anisotropy fields, extracted from the TS spectra, yields further insight into the competing nature of the magnetic phases. Unfolding of the different helical phases at T < 120 K (~TN) is analyzed by the temperature- and field-dependent magnetic entropy change. Based on these findings, the comprehensive magnetic phase diagrams of the MnP nanorod film are constructed for the first time for both the in-plane and out-of-plane magnetic field directions, revealing emergent strain/dimensionality-driven helical magnetic features that are absent in the magnetic phase diagram of the MnP single crystal.

cond-mat.mtrl-sci↗

arXiv2021

Competing ferromagnetic and antiferromagnetic interactions drive the magnetocaloric tunability in Gd55Co30NixAl15-x microwires

We have employed Gd55Co30NixAl15-x (x = 10, 5 and 0) amorphous microwires as a model system to unravel the impact of multiple magnetic interactions on the magnetism and the magnetocaloric behavior in Gd-alloy microwire systems. Our study shows that in addition to the RKKY ferromagnetic (FM) interaction (Gd-Gd), antiferromagnetic (AFM) interactions (Gd-Co, Gd-Ni) coexist and contribute to the magnetic and magnetocaloric response of the system. The dilution effect of Al element on the FM Gd-Gd interaction is responsible for the decrease of the Curie temperature (TC), whereas the increase of the saturation magnetization (MS) is originated from the reduced AFM Gd-Ni interaction. A thorough analysis of critical exponents suggests that the presence of the AFM interactions hinders the system to exhibit a long-range FM order below the TC. Adjusting these interactions is shown to preserve the large refrigerant capacity (RC) while tuning the TC over a wide temperature range, which is desirable for active magnetic refrigeration.

cond-mat.mtrl-sci↗

arXiv2021

Sub-second and ppm-level Optical Sensing of Hydrogen Using Templated Control of Nano-hydride Geometry and Composition

The use of hydrogen as a clean and renewable alternative to fossil fuels requires a suite of flammability mitigating technologies, particularly robust sensors for hydrogen leak detection and concentration monitoring. To this end, we have developed a class of lightweight optical hydrogen sensors based on a metasurface of Pd nano-patchy particle arrays, which fulfills the increasing requirements of a safe hydrogen fuel sensing system with no risk of sparking. The structure of the optical sensor is readily nano-engineered to yield extraordinarily rapid response to hydrogen gas (<3 s at 1 mbar H$_{2}$) with a high degree of accuracy (<5%). By incorporating 20% Ag, Au or Co, the sensing performances of the Pd-alloy sensor are significantly enhanced, especially for the Pd$_{80}$Co$_{20}$ sensor whose optical response time at 1 mbar of H$_{2}$ is just ~0.85 s, while preserving the excellent accuracy (<2.5%), limit of detection (2.5 ppm), and robustness against aging, temperature, and interfering gases. The superior performance of our sensor places it among the fastest and most sensitive optical hydrogen sensors.

cond-mat.mtrl-sci↗

arXiv2021

A Novel Magnetic Respiratory Sensor for Human Healthcare

Breathing is vital to life. Therefore, the real-time monitoring of breathing pattern of a patient is crucial to respiratory rehabilitation therapies such as magnetic resonance exams for respiratory-triggered imaging, chronic pulmonary disease treatment, and synchronized functional electrical stimulation. While numerous respiratory devices have been developed, they are often in direct contact with a patient, which can yield inaccurate or limited data. In this study, we developed a novel, non-invasive, and contactless magnetic sensing platform that can precisely monitor breathing, movement, or sleep patterns of a patient, thus providing efficient monitoring at a clinic or home. A magneto-LC resonance (MLCR) sensor converts the magnetic oscillations generated by breathing of the patient into an impedance spectrum, which allows for a deep analysis of breath variation to identify respiratory-related diseases like COVID-19. Owing to its ultrahigh sensitivity, the MLCR sensor yields a distinct breathing pattern for each patient tested. The sensor also provides an accurate measure of the strength of breath at multiple stages as well as anomalous variations in respiratory rate and amplitude. This suggests that the MLCR sensor can detect symptoms of COVID-19 in a patient due to shortness of breath or difficulty breathing as well as track the progress of the disease in real time.

physics.med-ph↗

arXiv2020

Light-controlled room temperature ferromagnetism in vanadium-doped tungsten diselenide semiconducting monolayers

Atomically thin transition metal dichalcogenide (TMD) semiconductors hold enormous potential for modern optoelectronic devices and quantum computing applications. By inducing long-range ferromagnetism (FM) in these semiconductors through the introduction of small amounts of a magnetic dopant, it is possible to extend their potential in emerging spintronic applications. Here, we demonstrate light-mediated, room temperature (RT) FM, in V-doped WS2 (V-WS2) monolayers. We probe this effect using the principle of magnetic LC resonance, which employs a soft ferromagnetic Co-based microwire coil driven near its resonance in the radio frequency (RF) regime. The combination of LC resonance with an extraordinary giant magneto-impedance effect, renders the coil highly sensitive to changes in the magnetic flux through its core. We then place the V-WS2 monolayer at the core of the coil where it is excited with a laser while its change in magnetic permeability is measured. Notably, the magnetic permeability of the monolayer is found to depend on the laser intensity, thus confirming light control of RT magnetism in this two-dimensional (2D) material. Guided by density functional calculations, we attribute this phenomenon to the presence of excess holes in the conduction and valence bands, as well as carriers trapped in the magnetic doping states, which in turn mediates the magnetization of the V-WS2 monolayer. These findings provide a unique route to exploit light-controlled ferromagnetism in low powered 2D spintronic devices capable of operating at RT.

cond-mat.mtrl-sci↗

arXiv2020

Monolayer Vanadium-doped Tungsten Disulfide: A Room-Temperature Dilute Magnetic Semiconductor

Dilute magnetic semiconductors, achieved through substitutional doping of spin-polarized transition metals into semiconducting systems, enable experimental modulation of spin dynamics in ways that hold great promise for novel magneto-electric or magneto-optical devices, especially for two-dimensional systems such as transition metal dichalcogenides that accentuate interactions and activate valley degrees of freedom. Practical applications of 2D magnetism will likely require room-temperature operation, air stability, and (for magnetic semiconductors) the ability to achieve optimal doping levels without dopant aggregation. Here we describe room-temperature ferromagnetic order obtained in semiconducting vanadium-doped tungsten disulfide monolayers produced by a reliable single-step film sulfidation method across an exceptionally wide range of vanadium concentrations, up to 12 at% with minimal dopant aggregation. These monolayers develop p-type transport as a function of vanadium incorporation and rapidly reach ambipolarity. Ferromagnetism peaks at an intermediate vanadium concentration of a few atomic percent and decreases for higher concentrations, which is consistent with quenching due to orbital hybridization at closer vanadium-vanadium spacings, as supported by transmission electron microscopy, magnetometry and first-principles calculations. Room-temperature two-dimensional dilute magnetic semiconductors provide a new component to expand the functional scope of van der Waals heterostructures and bring semiconducting magnetic 2D heterostructures them into the realm of practical application.

cond-mat.mtrl-sci↗

arXiv2020

Tunable Ferromagnetism and Thermally Induced Spin Flip in Vanadium-doped Tungsten Diselenide Monolayers at Room Temperature

The outstanding optoelectronic and valleytronic properties of transition metal dichalcogenides (TMDs) have triggered intense research efforts by the scientific community. An alternative to induce long-range ferromagnetism (FM) in TMDs is by introducing magnetic dopants to form a dilute magnetic semiconductor. Enhancing ferromagnetism in these semiconductors not only represents a key step towards modern TMD-based spintronics, but also enables exploration of new and exciting dimensionality-driven magnetic phenomena. To this end, we show tunable ferromagnetism at room temperature and a thermally induced spin flip (TISF) in monolayers of V-doped WSe2. As vanadium concentrations increase within the WSe2 monolayers the saturation magnetization increases, and it is optimal at ~4at.% vanadium; the highest doping/alloying level ever achieved for V-doped WSe2 monolayers. The TISF occurs at ~175 K and becomes more pronounced upon increasing the temperature towards room temperature. We demonstrate that TISF can be manipulated by changing the vanadium concentration within the WSe2 monolayers. We attribute TISF to the magnetic field and temperature dependent flipping of the nearest W-site magnetic moments that are antiferromagnetically coupled to the V magnetic moments in the ground state. This is fully supported by a recent spin-polarized density functional theory calculation. Our findings pave the way for the development of novel spintronic and valleytronic nanodevices based on atomically thin magnetic semiconductors and stimulate further studies in this rapidly expanding research field of 2D magnetism.

cond-mat.mtrl-sci↗