arXiv subjects

Manon Lallement

Publications and source records attributed to Manon Lallement.

12 recordsLinked to original sources

arXiv2026

Instrumental artifacts in photonic lantern spectroastrometry and their mitigation with PLred

Spectroastrometry is a powerful spectral-differential technique for probing angular scales below the resolution limit, but it is also well known to be susceptible to instrumental artifacts that can mimic or obscure real signals. In photonic lantern spectroastrometry, recently demonstrated on-sky with Subaru/FIRST-PL, the astrometric signal is encoded in relative flux variations between lantern outputs rather than in centroid shifts along a slit. This changes the artifact landscape: some slit-based spectroastrometric artifacts are avoided, but new artifact mechanisms emerge, including detector nonlinearity and spectral extraction errors, which can produce spurious features on emission or absorption lines. These lessons directly informed the design of PLred, an open source Python package for photonic lantern data reduction and instrument-agnostic spectral-differential image reconstruction. We describe the origin of these artifacts and the key pipeline design choices used to mitigate them.

astro-ph.IM↗

arXiv2026

The Roman Coronagraph Community Participation Program: pre-launch reference star list and impact of reference star properties on post-processing performance

The upcoming Roman Coronagraph will be the first high-contrast instrument in space capable of high-order wavefront sensing and control technologies, a critical technology demonstration for the proposed Habitable Worlds Observatory (HWO) that aims to directly image and characterize habitable exoEarths. The nominal Roman Coronagraph observing plan involves alternating observations of a science target and a bright, nearby reference star for both wavefront calibration and reference differential imaging post-processing. Reference star criteria for the most demanding coronagraph mode are restrictive, limiting the sample to only 40 candidates for which thorough observational vetting is needed to assess their suitability. Reference star properties such as resolved diameters, presence of circumstellar dust, and close point sources may also have more subtle impacts on post-processing efficacy that may inhibit final contrast performance. In this work, we describe the current progress of the CoronaGraph Instrument Reference stars for Exoplanets (CorGI-REx) observing campaign, a 300+-hour observing campaign that utilizes instruments from around the world to vet reference stars for high-order wavefront control suitability. We will present the pre-launch list of reference star candidates being utilized for the Roman Coronagraph Observation Phase constructed from a thorough analysis of high contrast and interferometric observations. We will also present the results of simulations investigating the impact of reference star resolved diameters and companions on post-processing performance. We conclude by discussing the importance of reference star selection for scheduling observations and optimizing contrast performance for the Roman Coronagraph along with implications for HWO coronagraph operations.

astro-ph.IM↗

arXiv2026

He'e-Lab: A modular testbed for astrophotonics and wavefront sensing development

Advanced astronomical instrumentation requires accessible, reconfigurable platforms to validate novel technologies and algorithms before on-sky deployment. We present the design, architecture, and alignment validation of the Hawaii Experimental Engineering Lab (He'e-Lab), a state-of-the-art modular testbed dedicated to two complementary research tracks: (A) the integration and characterization of astrophotonics components within a real-time computing loop, and (B) the development of advanced wavefront sensing and control (WFS&C) algorithms. The testbed features a broadband supercontinuum source (500 nm to 2 microns), a high-order 1k-actuator Boston Micromachines deformable mirror, and a 37-segment hexagonal mirror assembly providing piston-tip-tilt control to emulate segmented apertures like Keck and JWST. Downstream capabilities include a HASO 126 Shack-Hartmann sensor, a real-time computing environment driven by the CACAO package, and a modular injection platform coupled to a visible-wavelength spectrograph (R3, 000). We report on the successful system alignment and outline the roadmap for upcoming adaptive optics and photonic device validation frameworks.

astro-ph.IM↗

arXiv2026

FIRST-PL: Commissioning the first visible photonic lantern spectrograph for sub-diffraction-limit astronomy on Subaru/SCExAO

FIRST-PL (Fibered Imager foR a Single Telescope - Photonic Lantern) is a newly commissioned visible-light instrument on Subaru/SCExAO achieving spectroscopy below the diffraction limit. The instrument uses a Photonic Lantern (PL)-converting multimode fiber into 19 single-mode outputs-feeding a mid-resolution spectrograph (R 3000, 630-790 nm). On-sky performance demonstrates 40% injection efficiency at 680 nm (Strehl 30%) and 12x throughput improvement over single-mode fibers. Three operational modes enable spectro-astrometry (50 microarcseconds precision demonstrated on beta-CMi), image reconstruction, and high-contrast imaging. FIRST-PL represents a significant advancement in high-throughput photonic instrumentation.

astro-ph.IM↗

arXiv2025

On-sky Demonstration of Subdiffraction-limited Astronomical Measurement Using a Photonic Lantern

Resolving fine details of astronomical objects provides critical insights into their underlying physical processes. This drives in part the desire to construct ever-larger telescopes and interferometer arrays and to observe at shorter wavelength to lower the diffraction limit of angular resolution. Alternatively, one can aim to overcome the diffraction limit by extracting more information from a single telescope's aperture. A promising way to do this is spatial mode-based imaging, which projects focal-plane field onto a set of spatial modes before detection, retaining focal-plane phase information crucial at small angular scales but typically lost in intensity imaging. However, the practical implementation of mode-based imaging in astronomy from the ground has been challenged by atmospheric turbulence. Here, we present the first on-sky demonstration of a subdiffraction-limited, mode-based measurement using a photonic lantern (PL)-fed spectrometer installed on the SCExAO instrument at the Subaru Telescope. We introduce a novel calibration strategy that mitigates time-varying wavefront error and misalignment effects, leveraging simultaneously recorded focal-plane images and using a spectral-differential technique that self-calibrates the data. Observing the classical Be star $\beta$ CMi, we detected spectral-differential spatial signals and reconstructed images of its H$\alpha$-emitting disk. We achieved an unprecedented H$\alpha$ photocenter precision of 50$\mu$as in about 10-minute observation with a single telescope, measuring the disk's near-far side asymmetry for the first time. This work demonstrates the high precision, efficiency, and practicality of photonic mode-based imaging techniques to recover subdiffraction-limited information, opening new avenues for high angular resolution spectroscopic studies in astronomy.

astro-ph.IM↗

arXiv2024

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki ({\alpha} Leo) and `Aua ({\alpha} Ori)

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional

astro-ph.IM↗

arXiv2024

Spectral interferometric wavefront sensing: a solution for petalometry at Subaru/SCExAO

The petaling effect, induced by pupil fragmentation from the telescope spider, drastically affects the performance of high contrast instruments by inducing core splitting on the PSF. Differential piston/tip/tilt aberrations within each optically separated fragment of the pupil are poorly measured by commonly used Adaptive Optics (AO) systems. We here pursue a design of dedicated low-order wavefront sensor -- or petalometers -- to complement the main AO. Interferometric devices sense differential aberrations between fragments with optimal sensitivity; their weakness though is their limitation to wrapped phase measurements. We show that by combining multiple spectral channels, we increase the capture range for petaling aberrations beyond several microns, enough to disambiguate one-wave wrapping errors made by the main AO system. We propose here to implement a petalometer from the multi-wavelength imaging mode of the VAMPIRES visible-light instrument, deployed on SCExAO at the Subaru Telescope. The interferometric measurements obtained in four spectral channels through a 7 hole non-redundant mask allow us to effiiently reconstruct diffierential piston between pupil petals.

astro-ph.IM↗

arXiv2024

Photonic beam-combiner for visible interferometry with SCExAO/FIRST: laboratory characterization and design optimization

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instrument's stability and sensitivity. In order to perform differential phase measurements at the H$α$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed in collaboration with TEEM Photonics. This PIC performs the interferometric combination of the beams coming from sub-apertures selected in the telescope pupil, thus implementing the pupil remapping technique to restore the diffraction limit of the telescope. In this work, we report on the latest developments carried out within the FIRST project to produce a high performance visible PIC. The PICs are manufactured by TEEM Photonics, using their technology based on $K_+:Na_+$ ion exchange in glass. The first part of the study consists in the experimental characterization of the fundamental properties of the waveguides, in order to build an accurate model, which is the basis for the design of more complex functions. In the second part, theoretical designs and their optimization for three types of combiner architectures are presented: symmetric directional coupler, asymmetric directional couplers and ABCD cells including achromatic phase shifters.

astro-ph.IM↗

arXiv2024

Photonic chip for visible interferometry: laboratory characterization and comparison with the theoretical model

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instruments stability and sensitivity. In order to perform differential phase measurements at the H$α$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed. This PIC performs the visible combination of the beams coming from the telescope pupil sub-apertures. In this work, TEEM Photonics waveguides fabricated by $K_+:Na_+$ ion exchange in glass are characterized in terms of single-mode range and mode field diameter. The waveguide diffused index profile is modeled on Beamprop software. FIRST beam combiner building blocks are simulated, especially achromatic directional couplers and passive $π/2$ phase shifters for a potential ABCD interferometric combination.

astro-ph.IM↗

arXiv2024

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗

arXiv2023

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗

arXiv2023

Single-aperture spectro-interferometry in the visible at the Subaru telescope with FIRST: First on-sky demonstration on Keho'oea (α Lyrae) and Hokulei (α Aurigae)

FIRST is a spectro-interferometer combining, in the visible, the techniques of aperture masking and spatial filtering thanks to single-mode fibers. This instrument aims to deliver high contrast capabilities at spatial resolutions that are inaccessible to classical coronagraphic instruments. The technique implemented is called pupil remapping: the telescope is divided into subpupils by a segmented deformable mirror conjugated to a micro-lens array injecting light into single-mode fibers. The fiber outputs are rearranged in a nonredundant configuration, allowing simultaneous measurement of all baseline fringe patterns. The fringes are also spectrally dispersed, increasing the coherence length and providing precious spectral information. The optical setup of the instrument has been adapted to fit onto the SCExAO platform at the Subaru Telescope. We present the first on-sky demonstration of the FIRST instrument at the Subaru telescope. We used eight subapertures, each with a diameter of about 1 m. Closure phase measurements were extracted from the interference pattern to provide spatial information on the target. We tested the instrument on two types of targets : a point source (Keho'oea) and a binary system (Hokulei). An average accuracy of 0.6 degree is achieved on the closure phase measurements of Keho'oea, with a statistical error of about 0.15 degree at best. We estimate that the instrument can be sensitive to structures down to a quarter of the telescope spatial resolution. We measured the relative positions of Hokulei Aa and Ab with an accuracy about 1 mas. FIRST opens new observing capabilities in the visible wavelength range at the Subaru Telescope. With SCExAO being a testing platform for high contrast imaging instrumentation for future 30-meter class telescopes, FIRST is an important stepping stone for future interferometric instrumentation on extremely large telescopes.

astro-ph.IM↗