arXiv subjects

Manuel Le Gallo

Publications and source records attributed to Manuel Le Gallo.

35 records · Page 2Linked to original sources

arXiv2021

Measurement of onset of structural relaxation in melt-quenched phase change materials

Chalcogenide phase change materials enable non-volatile, low-latency storage-class memory. They are also being explored for new forms of computing such as neuromorphic and in-memory computing. A key challenge, however, is the temporal drift in the electrical resistance of the amorphous states that encode data. Drift, caused by the spontaneous structural relaxation of the newly recreated melt-quenched amorphous phase, has consistently been observed to have a logarithmic dependence in time. Here, we show that this observation is valid only in a certain observable timescale. Using threshold-switching voltage as the measured variable, based on temperature-dependent and short timescale electrical characterization, we experimentally measure the onset of drift. This additional feature of the structural relaxation dynamics serves as a new benchmark to appraise the different classical models to explain drift.

cond-mat.mtrl-sci↗

arXiv2021

A flexible and fast PyTorch toolkit for simulating training and inference on analog crossbar arrays

We introduce the IBM Analog Hardware Acceleration Kit, a new and first of a kind open source toolkit to simulate analog crossbar arrays in a convenient fashion from within PyTorch (freely available at https://github.com/IBM/aihwkit). The toolkit is under active development and is centered around the concept of an "analog tile" which captures the computations performed on a crossbar array. Analog tiles are building blocks that can be used to extend existing network modules with analog components and compose arbitrary artificial neural networks (ANNs) using the flexibility of the PyTorch framework. Analog tiles can be conveniently configured to emulate a plethora of different analog hardware characteristics and their non-idealities, such as device-to-device and cycle-to-cycle variations, resistive device response curves, and weight and output noise. Additionally, the toolkit makes it possible to design custom unit cell configurations and to use advanced analog optimization algorithms such as Tiki-Taka. Moreover, the backward and update behavior can be set to "ideal" to enable hardware-aware training features for chips that target inference acceleration only. To evaluate the inference accuracy of such chips over time, we provide statistical programming noise and drift models calibrated on phase-change memory hardware. Our new toolkit is fully GPU accelerated and can be used to conveniently estimate the impact of material properties and non-idealities of future analog technology on the accuracy for arbitrary ANNs.

cs.LG↗

arXiv2021

Robust High-dimensional Memory-augmented Neural Networks

Traditional neural networks require enormous amounts of data to build their complex mappings during a slow training procedure that hinders their abilities for relearning and adapting to new data. Memory-augmented neural networks enhance neural networks with an explicit memory to overcome these issues. Access to this explicit memory, however, occurs via soft read and write operations involving every individual memory entry, resulting in a bottleneck when implemented using the conventional von Neumann computer architecture. To overcome this bottleneck, we propose a robust architecture that employs a computational memory unit as the explicit memory performing analog in-memory computation on high-dimensional (HD) vectors, while closely matching 32-bit software-equivalent accuracy. This is achieved by a content-based attention mechanism that represents unrelated items in the computational memory with uncorrelated HD vectors, whose real-valued components can be readily approximated by binary, or bipolar components. Experimental results demonstrate the efficacy of our approach on few-shot image classification tasks on the Omniglot dataset using more than 256,000 phase-change memory devices. Our approach effectively merges the richness of deep neural network representations with HD computing that paves the way for robust vector-symbolic manipulations applicable in reasoning, fusion, and compression.

cs.ET↗

arXiv2020

Parallel convolution processing using an integrated photonic tensor core

With the proliferation of ultra-high-speed mobile networks and internet-connected devices, along with the rise of artificial intelligence, the world is generating exponentially increasing amounts of data - data that needs to be processed in a fast, efficient and smart way. These developments are pushing the limits of existing computing paradigms, and highly parallelized, fast and scalable hardware concepts are becoming progressively more important. Here, we demonstrate a computational specific integrated photonic tensor core - the optical analog of an ASIC-capable of operating at Tera-Multiply-Accumulate per second (TMAC/s) speeds. The photonic core achieves parallelized photonic in-memory computing using phase-change memory arrays and photonic chip-based optical frequency combs (soliton microcombs). The computation is reduced to measuring the optical transmission of reconfigurable and non-resonant passive components and can operate at a bandwidth exceeding 14 GHz, limited only by the speed of the modulators and photodetectors. Given recent advances in hybrid integration of soliton microcombs at microwave line rates, ultra-low loss silicon nitride waveguides, and high speed on-chip detectors and modulators, our approach provides a path towards full CMOS wafer-scale integration of the photonic tensor core. While we focus on convolution processing, more generally our results indicate the major potential of integrated photonics for parallel, fast, and efficient computational hardware in demanding AI applications such as autonomous driving, live video processing, and next generation cloud computing services.

physics.optics↗

arXiv2020

Accurate deep neural network inference using computational phase-change memory

In-memory computing is a promising non-von Neumann approach for making energy-efficient deep learning inference hardware. Crossbar arrays of resistive memory devices can be used to encode the network weights and perform efficient analog matrix-vector multiplications without intermediate movements of data. However, due to device variability and noise, the network needs to be trained in a specific way so that transferring the digitally trained weights to the analog resistive memory devices will not result in significant loss of accuracy. Here, we introduce a methodology to train ResNet-type convolutional neural networks that results in no appreciable accuracy loss when transferring weights to in-memory computing hardware based on phase-change memory (PCM). We also propose a compensation technique that exploits the batch normalization parameters to improve the accuracy retention over time. We achieve a classification accuracy of 93.7% on the CIFAR-10 dataset and a top-1 accuracy on the ImageNet benchmark of 71.6% after mapping the trained weights to PCM. Our hardware results on CIFAR-10 with ResNet-32 demonstrate an accuracy above 93.5% retained over a one day period, where each of the 361,722 synaptic weights of the network is programmed on just two PCM devices organized in a differential configuration.

cs.ET↗

arXiv2020

In-memory hyperdimensional computing

Hyperdimensional computing (HDC) is an emerging computational framework that takes inspiration from attributes of neuronal circuits such as hyperdimensionality, fully distributed holographic representation, and (pseudo)randomness. When employed for machine learning tasks such as learning and classification, HDC involves manipulation and comparison of large patterns within memory. Moreover, a key attribute of HDC is its robustness to the imperfections associated with the computational substrates on which it is implemented. It is therefore particularly amenable to emerging non-von Neumann paradigms such as in-memory computing, where the physical attributes of nanoscale memristive devices are exploited to perform computation in place. Here, we present a complete in-memory HDC system that achieves a near optimum trade-off between design complexity and classification accuracy based on three prototypical HDC related learning tasks, namely, language classification, news classification, and hand gesture recognition from electromyography signals. Comparable accuracies to software implementations are demonstrated, experimentally, using 760,000 phase-change memory devices performing analog in-memory computing.

cs.ET↗

arXiv2020

Accurate Emulation of Memristive Crossbar Arrays for In-Memory Computing

In-memory computing is an emerging non-von Neumann computing paradigm where certain computational tasks are performed in memory by exploiting the physical attributes of the memory devices. Memristive devices such as phase-change memory (PCM), where information is stored in terms of their conductance levels, are especially well suited for in-memory computing. In particular, memristive devices, when organized in a crossbar configuration can be used to perform matrix-vector multiply operations by exploiting Kirchhoff's circuit laws. To explore the feasibility of such in-memory computing cores in applications such as deep learning as well as for system-level architectural exploration, it is highly desirable to develop an accurate hardware emulator that captures the key physical attributes of the memristive devices. Here, we present one such emulator for PCM and experimentally validate it using measurements from a PCM prototype chip. Moreover, we present an application of the emulator for neural network inference where our emulator can capture the conductance evolution of approximately 400,000 PCM devices remarkably well.

cs.ET↗

arXiv2020

ESSOP: Efficient and Scalable Stochastic Outer Product Architecture for Deep Learning

Deep neural networks (DNNs) have surpassed human-level accuracy in a variety of cognitive tasks but at the cost of significant memory/time requirements in DNN training. This limits their deployment in energy and memory limited applications that require real-time learning. Matrix-vector multiplications (MVM) and vector-vector outer product (VVOP) are the two most expensive operations associated with the training of DNNs. Strategies to improve the efficiency of MVM computation in hardware have been demonstrated with minimal impact on training accuracy. However, the VVOP computation remains a relatively less explored bottleneck even with the aforementioned strategies. Stochastic computing (SC) has been proposed to improve the efficiency of VVOP computation but on relatively shallow networks with bounded activation functions and floating-point (FP) scaling of activation gradients. In this paper, we propose ESSOP, an efficient and scalable stochastic outer product architecture based on the SC paradigm. We introduce efficient techniques to generalize SC for weight update computation in DNNs with the unbounded activation functions (e.g., ReLU), required by many state-of-the-art networks. Our architecture reduces the computational cost by re-using random numbers and replacing certain FP multiplication operations by bit shift scaling. We show that the ResNet-32 network with 33 convolution layers and a fully-connected layer can be trained with ESSOP on the CIFAR-10 dataset to achieve baseline comparable accuracy. Hardware design of ESSOP at 14nm technology node shows that, compared to a highly pipelined FP16 multiplier design, ESSOP is 82.2% and 93.7% better in energy and area efficiency respectively for outer product computation.

cs.LG↗

arXiv2020

Mixed-precision deep learning based on computational memory

Deep neural networks (DNNs) have revolutionized the field of artificial intelligence and have achieved unprecedented success in cognitive tasks such as image and speech recognition. Training of large DNNs, however, is computationally intensive and this has motivated the search for novel computing architectures targeting this application. A computational memory unit with nanoscale resistive memory devices organized in crossbar arrays could store the synaptic weights in their conductance states and perform the expensive weighted summations in place in a non-von Neumann manner. However, updating the conductance states in a reliable manner during the weight update process is a fundamental challenge that limits the training accuracy of such an implementation. Here, we propose a mixed-precision architecture that combines a computational memory unit performing the weighted summations and imprecise conductance updates with a digital processing unit that accumulates the weight updates in high precision. A combined hardware/software training experiment of a multilayer perceptron based on the proposed architecture using a phase-change memory (PCM) array achieves 97.73% test accuracy on the task of classifying handwritten digits (based on the MNIST dataset), within 0.6% of the software baseline. The architecture is further evaluated using accurate behavioral models of PCM on a wide class of networks, namely convolutional neural networks, long-short-term-memory networks, and generative-adversarial networks. Accuracies comparable to those of floating-point implementations are achieved without being constrained by the non-idealities associated with the PCM devices. A system-level study demonstrates 173x improvement in energy efficiency of the architecture when used for training a multilayer perceptron compared with a dedicated fully digital 32-bit implementation.

cs.ET↗

arXiv2019

Supervised Learning in Spiking Neural Networks with Phase-Change Memory Synapses

Spiking neural networks (SNN) are artificial computational models that have been inspired by the brain's ability to naturally encode and process information in the time domain. The added temporal dimension is believed to render them more computationally efficient than the conventional artificial neural networks, though their full computational capabilities are yet to be explored. Recently, computational memory architectures based on non-volatile memory crossbar arrays have shown great promise to implement parallel computations in artificial and spiking neural networks. In this work, we experimentally demonstrate for the first time, the feasibility to realize high-performance event-driven in-situ supervised learning systems using nanoscale and stochastic phase-change synapses. Our SNN is trained to recognize audio signals of alphabets encoded using spikes in the time domain and to generate spike trains at precise time instances to represent the pixel intensities of their corresponding images. Moreover, with a statistical model capturing the experimental behavior of the devices, we investigate architectural and systems-level solutions for improving the training and inference performance of our computational memory-based system. Combining the computational potential of supervised SNNs with the parallel compute power of computational memory, the work paves the way for next-generation of efficient brain-inspired systems.

cs.ET↗

arXiv2019

Neuromorphic computing with multi-memristive synapses

Neuromorphic computing has emerged as a promising avenue towards building the next generation of intelligent computing systems. It has been proposed that memristive devices, which exhibit history-dependent conductivity modulation, could efficiently represent the synaptic weights in artificial neural networks. However, precise modulation of the device conductance over a wide dynamic range, necessary to maintain high network accuracy, is proving to be challenging. To address this, we present a multi-memristive synaptic architecture with an efficient global counter-based arbitration scheme. We focus on phase change memory devices, develop a comprehensive model and demonstrate via simulations the effectiveness of the concept for both spiking and non-spiking neural networks. Moreover, we present experimental results involving over a million phase change memory devices for unsupervised learning of temporal correlations using a spiking neural network. The work presents a significant step towards the realization of large-scale and energy-efficient neuromorphic computing systems.

cs.ET↗

arXiv2019

Monatomic phase change memory

Phase change memory has been developed into a mature technology capable of storing information in a fast and non-volatile way, with potential for neuromorphic computing applications. However, its future impact in electronics depends crucially on how the materials at the core of this technology adapt to the requirements arising from continued scaling towards higher device densities. A common strategy to finetune the properties of phase change memory materials, reaching reasonable thermal stability in optical data storage, relies on mixing precise amounts of different dopants, resulting often in quaternary or even more complicated compounds. Here we show how the simplest material imaginable, a single element (in this case, antimony), can become a valid alternative when confined in extremely small volumes. This compositional simplification eliminates problems related to unwanted deviations from the optimized stoichiometry in the switching volume, which become increasingly pressing when devices are aggressively miniaturized. Removing compositional optimization issues may allow one to capitalize on nanosize effects in information storage.

physics.app-ph↗

arXiv2018

Mixed-Precision In-Memory Computing

As CMOS scaling reaches its technological limits, a radical departure from traditional von Neumann systems, which involve separate processing and memory units, is needed in order to significantly extend the performance of today's computers. In-memory computing is a promising approach in which nanoscale resistive memory devices, organized in a computational memory unit, are used for both processing and memory. However, to reach the numerical accuracy typically required for data analytics and scientific computing, limitations arising from device variability and non-ideal device characteristics need to be addressed. Here we introduce the concept of mixed-precision in-memory computing, which combines a von Neumann machine with a computational memory unit. In this hybrid system, the computational memory unit performs the bulk of a computational task, while the von Neumann machine implements a backward method to iteratively improve the accuracy of the solution. The system therefore benefits from both the high precision of digital computing and the energy/areal efficiency of in-memory computing. We experimentally demonstrate the efficacy of the approach by accurately solving systems of linear equations, in particular, a system of 5,000 equations using 998,752 phase-change memory devices.

cs.ET↗

arXiv2018

In-memory computing on a photonic platform

Collocated data processing and storage are the norm in biological systems. Indeed, the von Neumann computing architecture, that physically and temporally separates processing and memory, was born more of pragmatism based on available technology. As our ability to create better hardware improves, new computational paradigms are being explored. Integrated photonic circuits are regarded as an attractive solution for on-chip computing using only light, leveraging the increased speed and bandwidth potential of working in the optical domain, and importantly, removing the need for time and energy sapping electro-optical conversions. Here we show that we can combine the emerging area of integrated optics with collocated data storage and processing to enable all-photonic in-memory computations. By employing non-volatile photonic elements based on the phase-change material, Ge2Sb2Te5, we are able to achieve direct scalar multiplication on single devices. Featuring a novel single-shot Write/Erase and a drift-free process, such elements can multiply two scalar numbers by mapping their values to the energy of an input pulse and to the transmittance of the device, codified in the crystallographic state of the element. The output pulse, carrying the information of the light-matter interaction, is the result of the computation. Our all-optical approach is novel, easy to fabricate and operate, and sets the stage for development of entirely photonic computers.

cs.ET↗

arXiv2017

Mixed-precision training of deep neural networks using computational memory

Deep neural networks have revolutionized the field of machine learning by providing unprecedented human-like performance in solving many real-world problems such as image and speech recognition. Training of large DNNs, however, is a computationally intensive task, and this necessitates the development of novel computing architectures targeting this application. A computational memory unit where resistive memory devices are organized in crossbar arrays can be used to locally store the synaptic weights in their conductance states. The expensive multiply accumulate operations can be performed in place using Kirchhoff's circuit laws in a non-von Neumann manner. However, a key challenge remains the inability to alter the conductance states of the devices in a reliable manner during the weight update process. We propose a mixed-precision architecture that combines a computational memory unit storing the synaptic weights with a digital processing unit and an additional memory unit accumulating weight updates in high precision. The new architecture delivers classification accuracies comparable to those of floating-point implementations without being constrained by challenges associated with the non-ideal weight update characteristics of emerging resistive memories. A two layer neural network in which the computational memory unit is realized using non-linear stochastic models of phase-change memory devices achieves a test accuracy of 97.40% on the MNIST handwritten digit classification problem.

cs.ET↗

arXiv2017

Fatiguing STDP: Learning from Spike-Timing Codes in the Presence of Rate Codes

Spiking neural networks (SNNs) could play a key role in unsupervised machine learning applications, by virtue of strengths related to learning from the fine temporal structure of event-based signals. However, some spike-timing-related strengths of SNNs are hindered by the sensitivity of spike-timing-dependent plasticity (STDP) rules to input spike rates, as fine temporal correlations may be obstructed by coarser correlations between firing rates. In this article, we propose a spike-timing-dependent learning rule that allows a neuron to learn from the temporally-coded information despite the presence of rate codes. Our long-term plasticity rule makes use of short-term synaptic fatigue dynamics. We show analytically that, in contrast to conventional STDP rules, our fatiguing STDP (FSTDP) helps learn the temporal code, and we derive the necessary conditions to optimize the learning process. We showcase the effectiveness of FSTDP in learning spike-timing correlations among processes of different rates in synthetic data. Finally, we use FSTDP to detect correlations in real-world weather data from the United States in an experimental realization of the algorithm that uses a neuromorphic hardware platform comprising phase-change memristive devices. Taken together, our analyses and demonstrations suggest that FSTDP paves the way for the exploitation of the spike-based strengths of SNNs in real-world applications.

cs.NE↗

arXiv2017

Temporal correlation detection using computational phase-change memory

For decades, conventional computers based on the von Neumann architecture have performed computation by repeatedly transferring data between their processing and their memory units, which are physically separated. As computation becomes increasingly data-centric and as the scalability limits in terms of performance and power are being reached, alternative computing paradigms are searched for in which computation and storage are collocated. A fascinating new approach is that of computational memory where the physics of nanoscale memory devices are used to perform certain computational tasks within the memory unit in a non-von Neumann manner. Here we present a large-scale experimental demonstration using one million phase-change memory devices organized to perform a high-level computational primitive by exploiting the crystallization dynamics. Also presented is an application of such a computational memory to process real-world data-sets. The results show that this co-existence of computation and storage at the nanometer scale could be the enabler for new, ultra-dense, low power, and massively parallel computing systems.

cs.ET↗