arXiv subjects

Marc Allain

Publications and source records attributed to Marc Allain.

16 recordsLinked to original sources

arXiv2026

A depth-dependent, transverse shift-invariant operator for fast iterative 3D photoacoustic tomography in planar geometry

Iterative model-based image reconstruction in photoacoustic tomography (PAT) enables principled incorporation of detector physics, object-related priors, and complex acquisition strategies. However, for three-dimensional (3D) imaging scenario, the computational cost is often dominated by repeatedly solving wave equations. We propose a fast forward model for planar detection geometries that exploits transverse shift invariance. This symmetry enables to compute the full acoustic field from a 3D object, as a result of a set of 2D convolutions with depth-dependent impulse responses. This formulation yields a FFT-based forward operator and its corresponding discrete adjoint operator, making iterative reconstruction faster without calling partial differential equation (PDE) solvers at each iteration. We validate the model against commonly used PDE solver under matched discretization and boundary settings, and demonstrate accelerations of up to 2 orders of magnitude for iterative reconstructions from experimental all-optical photoacoustic datasets.

physics.optics↗

arXiv2026

Quantitative 3D imaging of highly distorted micro-crystals using Bragg ptychography

Bragg coherent diffraction imaging (BCDI) fails to reliably retrieve phases in micro-crystals exhibiting strong strain inhomogeneities, which restricts its applicability. Here we show that three-dimensional Bragg ptychography (3DBP) overcomes this limitation by enabling stable inversion for large lattice distortions. Using a combination of experimental measurements and numerical tests, we compare the performance limits of the two approaches and demonstrate that 3DBP tolerates lattice distortions more than six times larger than BCDI. We also establish the sensitivity of both methods on a weakly distorted crystal, for which 3DBP yields smoother amplitude and phase fields with reduced short-length-scale artifacts. 3DBP thus provides a reliable route for imaging micro-crystals with large lattice distortions, expanding the scope of coherent X-ray Bragg microscopy to strongly deformed systems.

physics.optics↗

arXiv2025

Phasebook: A Survey of Selected Open Problems in Phase Retrieval

Phase retrieval is an inverse problem that, on one hand, is crucial in many applications across imaging and physics, and, on the other hand, leads to deep research questions in theoretical signal processing and applied harmonic analysis. This survey paper is an outcome of the recent workshop Phase Retrieval in Mathematics and Applications (PRiMA) (held on August 5--9 2024 at the Lorentz Center in Leiden, The Netherlands) that brought together experts working on theoretical and practical aspects of the phase retrieval problem with the purpose to formulate and explore essential open problems in the field.

cs.IT↗

arXiv2023

Imaging extended single crystal lattice distortion fields with multi-peak Bragg ptychography

We describe a phase-retrieval-based imaging method to directly spatially resolve the vector lattice distortions in an extended crystalline sample by explicit coupling of independent Bragg ptychography data sets into the reconstruction process. Our method addresses this multi-peak Bragg ptychography (MPBP) inverse problem by explicit gradient descent optimization of an objective function based on modeling of the probe-lattice interaction, along with corrective steps to address spurious reconstruction artifacts. Robust convergence of the optimization process is ensured by computing exact gradients with the automatic differentiation capabilities of high-performance computing software packages. We demonstrate MPBP reconstruction with simulated ptychography data mimicking diffraction from a single crystal membrane containing heterogeneities that manifest as phase discontinuities in the diffracted wave. We show the superior ability of such an optimization-based approach in removing reconstruction artifacts compared to existing phase retrieval and lattice distortion reconstruction approaches.

cond-mat.mtrl-sci↗

arXiv2023

Super-resolution capacity of variance-based stochastic fluorescence microscopy

Improving the resolution of fluorescence microscopy beyond the diffraction limit can be achievedby acquiring and processing multiple images of the sample under different illumination conditions.One of the simplest techniques, Random Illumination Microscopy (RIM), forms the super-resolvedimage from the variance of images obtained with random speckled illuminations. However, thevalidity of this process has not been fully theorized. In this work, we characterize mathematicallythe sample information contained in the variance of diffraction-limited speckled images as a functionof the statistical properties of the illuminations. We show that an unambiguous two-fold resolutiongain is obtained when the speckle correlation length coincides with the width of the observationpoint spread function. Last, we analyze the difference between the variance-based techniques usingrandom speckled illuminations (as in RIM) and those obtained using random fluorophore activation(as in Super-resolution Optical Fluctuation Imaging, SOFI).

physics.optics↗

arXiv2021

A matrix-free Levenberg-Marquardt algorithm for efficient ptychographic phase retrieval

The phase retrieval problem, where one aims to recover a complex-valued image from far-field intensity measurements, is a classic problem encountered in a range of imaging applications. Modern phase retrieval approaches usually rely on gradient descent methods in a nonlinear minimization framework. Calculating closed-form gradients for use in these methods is tedious work, and formulating second order derivatives is even more laborious. Additionally, second order techniques often require the storage and inversion of large matrices of partial derivatives, with memory requirements that can be prohibitive for data-rich imaging modalities. We use a reverse-mode automatic differentiation (AD) framework to implement an efficient matrix-free version of the Levenberg-Marquardt (LM) algorithm, a longstanding method that finds popular use in nonlinear least-square minimization problems but which has seen little use in phase retrieval. Furthermore, we extend the basic LM algorithm so that it can be applied for general constrained optimization problems beyond just the least-square applications. Since we use AD, we only need to specify the physics-based forward model for a specific imaging application; the derivative terms are calculated automatically through matrix-vector products, without explicitly forming any large Jacobian or Gauss-Newton matrices. We demonstrate that this algorithm can be used to solve both the unconstrained ptychographic object retrieval problem and the constrained "blind" ptychographic object and probe retrieval problems, under both the Gaussian and Poisson noise models, and that this method outperforms best-in-class first-order ptychographic reconstruction methods: it provides excellent convergence guarantees with (in many cases) a superlinear rate of convergence, all with a computational cost comparable to, or lower than, the tested first-order algorithms.

eess.IV↗

arXiv2020

High-resolution three-dimensional crystalline microscopy

In this communication, we discuss how 3D information about the structure of a crystalline sample is encoded in Bragg 3DXCDI measurements. Our analysis brings to light the role of the experimental parameters in the quality of the final reconstruction. One of our salient conclusions is that these parameters can be set prior to the ptychographic 3DXCDI experiment and that the spatial resolution limit of the 3D reconstruction can be evaluated accordingly.

physics.comp-ph↗

arXiv2020

Detector tilt considerations in high-energy Bragg coherent diffraction imaging: a simulation study

This paper addresses three-dimensional signal distortion and image reconstruction issues in x-ray Bragg coherent diffraction imaging (BCDI) in the event of a general non-orthogonal orientation of the area detector with respect to the diffracted beam. Growing interest in novel BCDI adaptations at fourth-generation synchrotron light sources has necessitated improvisations in the experimental configuration and the subsequent data analysis. One such possibly unavoidable improvisation that is envisioned in this paper is a photon-counting area detector whose face is tilted away from the perpendicular to the Bragg-diffracted beam during acquisition of the coherent diffraction signal. We describe a likely circumstance in which one would require such a detector configuration, along with experimental precedent at third generation synchrotrons. Using physically accurate diffraction simulations from synthetic scatterers in the presence of such tilted detectors, we analyze the general nature of the observed signal distortion qualitatively and quantitatively, and provide a prescription to correct for it during image reconstruction. Our simulations and reconstructions are based on an adaptation of the known theory of BCDI sampling geometry as well as recently developed projection-based methods of wavefield propagation. Such configurational modifications and their numerical remedies are potentially valuable in realizing unconventional coherent diffraction measurement geometries and eventually paving the way for the integration of BCDI into new materials characterization experiments at next-generation light sources.

physics.ins-det↗

arXiv2019

General approaches for shear-correcting coordinate transformations in Bragg coherent diffraction imaging: Part 1

In this two-part article series we provide a generalized description of the scattering geometry of Bragg coherent diffraction imaging (BCDI) experiments, the shear distortion effects inherent to the resulting three-dimensional (3D) image from current phase retrieval methods and strategies to mitigate this distortion. In this Part I, we derive in general terms the real-space coordinate transformation to correct this shear, which originates in the more fundamental relationship between the representations of mutually conjugate 3D spaces. Such a transformation, applied as a final post-processing step following phase retrieval, is crucial for arriving at an un-distorted and physically meaningful image of the 3D scatterer. As the relevance of BCDI grows in the field of materials characterization, we take this opportunity to generalize the available sparse literature that addresses the geometric theory of BCDI and the subsequent analysis methods. This aspect, specific to coherent Bragg diffraction and absent in two-dimensional transmission CDI experiments, gains particular importance concerning spatially-resolved characterization of 3D crystalline materials in a realiable, non-destructive manner. These articles describe this theory, from the diffraction in Bragg geometry, to the corrections needed to obtain a properly rendered digital image of the 3D scatterer. Part I provides the experimental BCDI communitcy with the theoretical underpinnings of the 3D real-space distortions in the phase-retrieved object, along with the necessary post-retrieval correction method. Part II builds upon the geometric theory developed in Part I with the formalism to correct the shear distortions directly on an orthogonal grid within the phase retrieval algorithm itself, allowing more physically realistic constraints to be applied.

physics.ins-det↗

arXiv2019

General approaches for shear-correcting coordinate transformations in Bragg coherent diffraction imaging: Part 2

X-ray Bragg coherent diffraction imaging has been demonstrated as a powerful three-dimensional (3D) microscopy approach for the investigation of sub-micrometer-scale crystalline particles. It is based on the measurement of a series of coherent diffraction intensity patterns that are numerically inverted to retrieve an image of the spatial distribution of relative phase and amplitude of the Bragg structure factor of the scatterer. This 3D information, which is collected through an angular rotation of the sample, is necessarily obtained in a non-orthogonal frame in Fourier space that must be eventually reconciled. To deal with this, the currently favored approach (detailed in Part I) is to perform the entire inversion in conjugate non-orthogonal real and Fourier space frames, and to transform the 3D sample image into an orthogonal frame as a post-processing step for result analysis. In this article, a direct follow-up of Part I, we demonstrate two different transformation strategies that enable the entire inversion procedure of the measured data set to be performed in an orthogonal frame. The new approaches described here build mathematical and numerical frameworks that apply to the cases of evenly and non-evenly sampled data along the direction of sample rotation (the rocking curve). The value of these methods is that they rely on and incorporate significantly more information about the experimental geometry into the design of the phase retrieval Fourier transformation than the strategy presented in Part I. Two important outcomes are 1) that the resulting sample image is correctly interpreted in a shear-free frame, and 2) physically realistic constraints of BCDI phase retrieval that are difficult to implement with current methods are easily incorporated. Computing scripts are also given to aid readers in the implementation of the proposed formalisms.

physics.ins-det↗

arXiv2019

Using Automatic Differentiation as a General Framework for Ptychographic Reconstruction

Coherent diffraction imaging methods enable imaging beyond lens-imposed resolution limits. In these methods, the object can be recovered by minimizing an error metric that quantifies the difference between diffraction patterns as observed, and those calculated from a present guess of the object. Efficient minimization methods require analytical calculation of the derivatives of the error metric, which is not always straightforward. This limits our ability to explore variations of basic imaging approaches. In this paper, we propose to substitute analytical derivative expressions with the automatic differentiation method, whereby we can achieve object reconstruction by specifying only the physics-based experimental forward model. We demonstrate the generality of the proposed method through straightforward object reconstruction for a variety of complex ptychographic experimental models.

eess.IV↗

arXiv2018

Phase retrieval for Bragg coherent diffraction imaging at high X-ray energies

Coherent X-ray beams with energies $\geq 50$ keV can potentially enable three-dimensional imaging of atomic lattice distortion fields within individual crystallites in bulk polycrystalline materials through Bragg coherent diffraction imaging (BCDI). However, the undersampling of the diffraction signal due to Fourier space compression at high X-ray energies renders conventional phase retrieval algorithms unsuitable for three-dimensional reconstruction. To address this problem we utilize a phase retrieval method with a Fourier constraint specifically tailored for undersampled diffraction data measured with coarse-pitched detector pixels that bin the underlying signal. With our approach, we show that it is possible to reconstruct three-dimensional strained crystallites from an undersampled Bragg diffraction data set subject to pixel-area integration without having to physically upsample the diffraction signal. Using simulations and experimental results, we demonstrate that explicit modeling of Fourier space compression during phase retrieval provides a viable means by which to invert high-energy BCDI data, which is otherwise intractable.

cond-mat.mtrl-sci↗

arXiv2017

Quantitative imaging of anisotropic material properties with vectorial ptychography

Following the recent establishment of the formalism of vectorial ptychography [Ferrand et al., Opt. Lett. 40, 5144 (2015)], first measurements are reported in the optical range, demonstrating the capability of the proposed method to map the four parameters of the Jones matrix of an anisotropic specimen, and therefore to quantify a wide range of optical material properties, including power transmittance, optical path difference, diattenuation, retardance, and fast-axis orientation.

physics.optics↗

arXiv2016

Joint reconstruction strategy for structured illumination microscopy with unknown illuminations

The blind structured illumination microscopy (SIM) strategy proposed in (Mudry et al., 1992) is fully re-founded in this paper, unveiling the central role of the sparsity of the illumination patterns in the mechanism that drives super-resolution in the method. A numerical analysis shows that the resolving power of the method can be further enhanced with optimized one-photon or two-photon speckle illuminations. A much improved numerical implementation is provided for the reconstruction problem under the image positivity constraint. This algorithm rests on a new preconditioned proximal iteration faster than existing solutions, paving the way to 3D and real-time 2D reconstruction

physics.data-an↗

arXiv2015

On the super-resolution capacity of imagers using unknown speckle illuminations

Speckle based imaging consists of forming a super-resolved reconstruction of an unknown sample from low-resolution images obtained under random inhomogeneous illuminations (speckles). In a blind context where the illuminations are unknown, we study the intrinsic capacity of speckle-based imagers to recover spatial frequencies outside the frequency support of the data, with minimal assumptions about the sample. We demonstrate that, under physically realistic conditions, the covariance of the data has a super-resolution power corresponding to the squared magnitude of the imager point spread function. This theoretical result is important for many practical imaging systems such as acoustic and electromagnetic tomographs, fluorescence and photoacoustic microscopes, or synthetic aperture radar imaging. A numerical validation is presented in the case of fluorescence microscopy.

physics.data-an↗

arXiv2015

Super-resolution photoacoustic fluctuation imaging with multiple speckle illumination

In deep tissue photoacoustic imaging, the spatial resolution is inherently limited by acoustic diffraction. Moreover, as the ultrasound attenuation increases with frequency, resolution is often traded-off for penetration depth. Here we report on super-resolution photoacoustic imaging by use of multiple speckle illumination. Specifically, we show that the analysis of second-order fluctuations of the photoacoustic images combined with image deconvolution enables resolving optically absorbing structures beyond the acoustic diffraction limit. A resolution increase of almost a factor 2 is demonstrated experimentally. Our method introduces a new framework that could potentially lead to deep tissue photoacoustic imaging with sub-acoustic resolution.

physics.optics↗