arXiv subjects

Marc Heyns

Publications and source records attributed to Marc Heyns.

9 recordsLinked to original sources

arXiv2021

First experimental demonstration of a scalable linear majority gate based on spin waves

We report on the first experimental demonstration of majority logic operation using spin waves in a scaled device with an in-line input and output layout. The device operation is based on the interference of spin waves generated and detected by inductive antennas in an all-electrical microwave circuit. We demonstrate the full truth table of a majority logic function with the ability to distinguish between strong and weak majority, as well as an inverted majority function by adjusting the operation frequency. Circuit performance projections predict low energy consumption of spin wave based compared to CMOS for large arithmetic circuits.

cond-mat.mes-hall↗

arXiv2021

Electrical spin-wave spectroscopy in nanoscale waveguides with nonuniform magnetization

Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias field led to several distinct bands, corresponding to different quantized width modes, with both negative and positive slopes. Micromagnetic simulations showed that, in this geometry, the magnetization was nonuniform and tilted due to the strong shape anisotropy of the waveguides. Simulations of the quantized spin-wave modes in such nonuniformly magnetized waveguides resulted in spin wave dispersion relations in good agreement with the experiments.

cond-mat.mes-hall↗

arXiv2020

Epitaxy of new layered materials: 2D chalcogenides and challenges of weak van der Waals interactions

The application of new materials in nanotechnology opens new perspectives and enables ground-breaking innovations. Two-dimensional van der Waals materials and more specific, 2D chalcogenides are a promising class of new materials awaiting their usage in the semiconductor industry. However, the integration of van der Waals materials relying on industry-compatible manufacturing processes is still a major challenge. This is currently restricting the application of these new materials to the research laboratories environment only. The large-area and single-crystalline growth of van der Waals materials is one of the most important requirements to meet the challenging demands implied by the semiconductor industry. This review contributes to a more generalized understanding on the integration of van der Waals materials - and in more specific 2D chalcogenides - through the growth process of epitaxy. This, can pursue further the aspiration of large-area, single-crystalline and defect-free epitaxial integration of (quasi) van der Waals homo- and heterostructures into the great world of the semiconductor industry.

cond-mat.mtrl-sci↗

arXiv2020

Towards twin-free molecular beam epitaxy of 2D chalcogenides explained by stronger interlayer van der Waals coupling

Defect-free epitaxial growth of 2D materials is one of the holy grails for a successful integration of van der Waals (vdW) materials in the semiconductor industry. The large-area (quasi-)vdW epitaxy of layered 2D chalcogenides is consequently carefully being researched since these materials hold very promising properties for future nanoelectronic applications. The formation of defects such as stacking faults like 60o twins and consequently 60o grain boundaries is still of major concern for the defect-free epitaxial growth of 2D chalcogenides. Although growth strategies to overcome the occurrence of these defects are currently being considered, more fundamental understanding on the origin of these defects at the initial stages of the growth is highly essential. Therefore this work focuses on the understanding of 60o twin formation in (quasi-)vdW epitaxy of 2D chalcogenides relying on systematic molecular beam epitaxy (MBE) experiments supported by density functional theory (DFT) calculations. The MBE experiments reveal the striking difference in 60o twin formation between WSe2 and Bi2Se3 in both quasi-vdW heteroepitaxy and vdW homoepitaxy, which from our DFT calculations links to the difference in interlayer vdW coupling strength. The stronger interlayer vdW coupling in Bi2Se3 compared to WSe2 results in a striking enhanced control on twin formation and hence shows significantly more promise for defect-free epitaxial integration. This interesting aspect of (quasi-)vdW epitaxy reveals that the strength of interlayer vdW coupling is key for functional 2D materials and opens perspectives for other vdW materials sharing strong interlayer interactions.

cond-mat.mtrl-sci↗

arXiv2019

Reconfigurable sub-micron spin-wave majority gate with electrical transducers

Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics is still lacking. Here, we demonstrate a sub-micron inline spin-wave majority gate with fan-out. Time-resolved imaging of the magnetization dynamics by scanning transmission x-ray microscopy illustrates the device operation. All-electrical spin-wave spectroscopy further demonstrates majority gates with sub-micron dimensions, reconfigurable input and output ports, and frequency-division multiplexing. Challenges for hybrid spintronic computing systems based on spin-wave majority gates are discussed.

physics.app-ph↗

arXiv2019

Excitation and propagation of spin waves in non-uniformly magnetized waveguides

The characteristics of spin waves in ferromagnetic waveguides with nonuniform magnetization have been investigated for situations where the shape anisotropy field of the waveguide is comparable to the external bias field. Spin-wave generation was realized by the magnetoelastic effect by applying normal and shear strain components, as well as by the Oersted field emitted by an inductive antenna. The magnetoelastic excitation field has a nonuniform profile over the width of the waveguide because of the nonuniform magnetization orientation, whereas the Oersted field remains uniform. Using micromagnetic simulations, we indicate that both types of excitation fields generate quantised width modes with both odd and even mode numbers as well as tilted phase fronts. We demonstrate that these effects originate from the average magnetization orientation with respect to the main axes of the magnetic waveguide. Furthermore, it is indicated that the excitation efficiency of the second-order mode generally surpasses that of the first-order mode due to their symmetry. The relative intensity of the excited modes can be controlled by the strain state as well as by tuning the dimensions of the excitation area. Finally, we demonstrate that the nonreciprocity of spin-wave radiation due to the chirality of an Oersted field generated by an inductive antenna is absent for magnetoelastic spin-wave excitation.

cond-mat.mes-hall↗

arXiv2018

Spin wave emission by spin-orbit torque antennas

We study the generation of propagating spin waves in Ta/CoFeB waveguides by spin-orbit torque antennas and compare them to conventional inductive antennas. The spin-orbit torque was generated by a transverse microwave current across the magnetic waveguide. The detected spin wave signals for an in-plane magnetization across the waveguide (Damon-Eshbach configuration) exhibited the expected phase rotation and amplitude decay upon propagation when the current spreading was taken into account. Wavevectors up to about 6 rad/$\mu$m could be excited by the spin-orbit torque antennas despite the current spreading, presumably due to the non-uniformity of the microwave current. The relative magnitude of generated anti-damping spin-Hall and Oersted fields was calculated within an analytic model and it was found that they contribute approximately equally to the total effective field generated by the spin-orbit torque antenna. Due to the ellipticity of the precession in the ultrathin waveguide and the different orientation of the anti-damping spin-Hall and Oersted fields, the torque was however still dominated by the Oersted field. The prospects for obtaining a pure spin-orbit torque response are discussed, as are the energy efficiency and the scaling properties of spin-orbit torque antennas.

cond-mat.mes-hall↗

arXiv2017

Strain coupling optimization in magnetoelectric transducers

The mechanical behavior of magnetoelectric transducers consisting of piezoelectric-magnetostrictive bilayers has been modeled. The effect of the aspect ratio of the transducer as well as the influence of non-active surrounding layers has been modeled, including a passivation layer surrounding the active device, a clamping layer above the active device, and an interfacial layer that might be inserted between the magnetostrictive and the piezoelectric layers. Strategies to control and maximize the strain magnitude and orientation based on material selection and device design are proposed.

physics.app-ph↗

arXiv2017

Micromagnetic simulations of magnetoelastic spin wave excitation in scaled magnetic waveguides

We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to the effect of the demagnetizing field leads to the excitation of spin waves for oscillating normal strains both parallel and perpendicular to the magnetization. The excitation by biaxial normal in-plane strain was found to be much more efficient than by uniaxial normal out-of-plane strain. For narrow waveguides with widths of 200\,nm, the excitation efficiency of biaxial normal in-plane strain was comparable to that of shear strain.

cond-mat.mes-hall↗