arXiv subjects

Marc Kassis

Publications and source records attributed to Marc Kassis.

At least 19 recordsLinked to original sources

arXiv2026

Pre-shipment optical characterization of the SCALES instrument

The Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a 1-5 micron imager and 2-5 micron integral field spectrograph, currently being commissioned on the Keck II Telescope. SCALES is optimized for exoplanet high-contrast imaging and spectroscopic characterization, and will be sensitive to older, colder exoplanets than existing instrumentation. The 12.3" x 12.3" imaging channel is designed to replicate the capabilities of NIRC2, and the low (R~35-200, 2.2" x 2.2" FOV) and medium (R~2500-5000, 0.36" x 0.34" FOV) spectral resolution modes offer new capabilities compared to existing Keck instrumentation. We present preliminary optical performance results from laboratory testing and commissioning of SCALES.

astro-ph.IM↗

arXiv2026

Enabling Quantitative Polarimetry for Keck/NIRC2: Preliminary Mueller Matrix Model Calibration

The Keck/NIRC2 infrared imager was upgraded in 2025 with dual-beam polarimetric observing modes spanning approximately 1.1--4.1 microns (JHKL' bands). We present a preliminary JHK calibration of NIRC2 Polarimetry using a wavelength-dependent Mueller matrix model of the Keck tertiary mirror (M3), half-wave plate (HWP), image rotator (IMR), downstream optics, and Wollaston prism. We constrain the model downstream of M3 using dome flat sequences spanning ten HWP and nine IMR angles in each band. Although the model reproduces the dominant modulation, the residuals show structure dependent on HWP and IMR angle. Measurement matrix inversion of unpolarized standard star observations gives M3 diattenuations of 0.0119+/-0.0009, 0.0098+/-0.0004, and 0.0068+/-0.0005 in J, H, and Kp, substantially closer to Fresnel predictions for aluminum than the values derived from dome flats. The larger dome flat modulation may indicate polarization in the incident dome illumination or Mueller matrix model inaccuracies. These results establish an initial calibration framework while motivating improved input polarization constraints, fixed HWP parameters from previous laboratory measurements, model validation with polarized standard stars, and extension to L'.

astro-ph.IM↗

arXiv2025

Increasing science yield with a twilight observing program with the SCALES instrument at Keck

While astronomical twilight closes the observing window for optical astronomers, the infrared sky remains dark even through sunrise, allowing IR astronomers to observe through twilight. The Slicer Combined with an Array of Lenslets for Exoplanet Spectroscopy (SCALES) instrument is a 2-5 micron coronagraphic integral field spectrograph scheduled to arrive at Keck in early 2026. SCALES has the potential to execute exciting science and support the astronomical community and upcoming NASA missions through a dedicated cadenced twilight observing program. We estimate that the current twilight observing program on Keck conducts 18+-1 hours per year of science observations; a facilitized twilight observing program that is prioritized by the observatory could yield 151+-2 hours of science time per year. This work presents the scientific motivation and high-level feasibility of two primary SCALES twilight science cases, monitoring of Solar System objects and a high-contrast imaging search for exoplanets around bright nearby stars, taking lessons from the existing NIRC2 and OSIRIS Twilight Zone program and considering increases in program scope. We also consider technical and operational challenges to overcome before the SCALES instrument begins its twilight observing program.

astro-ph.IM↗

arXiv2024

Liger at W.M. Keck Observatory: imager structural analysis, fabrication, and characterization plan

Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade to the Keck I telescope. Liger adapts the design of the InfraRed Imaging Spectrograph (IRIS) for the Thirty Meter Telescope (TMT) to Keck by implementing a new imager and re-imaging optics. The performance of the imager is critical as it sequentially feeds the spectrograph and contains essential components such as the pupil wheel, filter wheel, and pupil viewing camera. We present the design and structural analysis of the Liger imager optical assembly including static, modal, and thermal simulations. We present the fabrication as well as the full assembly and characterization plan. The imager will be assembled bench-top in a clean room utilizing a coordinate-measuring machine (CMM) for warm alignment. To ensure optimal performance, the imager will be characterized in a test cryostat before integration with the full Liger instrument. This comprehensive approach to characterization ensures the precision and reliability of the imager, enhancing the observational capabilities of Liger and W.M. Keck Observatory.

astro-ph.IM↗

arXiv2024

An Earth-sized Planet on the Verge of Tidal Disruption

TOI-6255~b (GJ 4256) is an Earth-sized planet (1.079$\pm0.065$ $R_\oplus$) with an orbital period of only 5.7 hours. With the newly commissioned Keck Planet Finder (KPF) and CARMENES spectrographs, we determined the planet's mass to be 1.44$\pm$0.14 $M_{\oplus}$. The planet is just outside the Roche limit, with $P_{\rm orb}/P_{\rm Roche}$ = 1.13 $\pm0.10$. The strong tidal force likely deforms the planet into a triaxial ellipsoid with a long axis that is $\sim$10\% longer than the short axis. Assuming a reduced stellar tidal quality factor $Q_\star^\prime \approx10^7$, we predict that tidal orbital decay will cause TOI-6255 to reach the Roche limit in roughly 400 Myr. Such tidal disruptions may produce the possible signatures of planet engulfment that have been on stars with anomalously high refractory elemental abundances compared to its conatal binary companion. TOI-6255 b is also a favorable target for searching for star-planet magnetic interactions, which might cause interior melting and hasten orbital decay. TOI-6255 b is a top target (Emission Spectroscopy Metric of about 24) for phase curve observations with the James Webb Space Telescope.

astro-ph.EP↗

arXiv2024

Asteroseismology of the Nearby K-Dwarf $\sigma$ Draconis using the Keck Planet Finder and TESS

Asteroseismology of dwarf stars cooler than the Sun is very challenging due to the low amplitudes and rapid timescales of oscillations. Here, we present the asteroseismic detection of solar-like oscillations at 4-minute timescales ($\nu_{\mathrm{max}}\sim4300\mu$Hz) in the nearby K-dwarf $\sigma$ Draconis using extreme precision Doppler velocity observations from the Keck Planet Finder and 20-second cadence photometry from NASA's Transiting Exoplanet Survey Satellite. The star is the coolest dwarf star to date with both velocity and luminosity observations of solar-like oscillations, having amplitudes of $5.9\pm0.8\,$cm$\,\text{s}^{-1}$ and $0.8\pm0.2$ ppm, respectively. These measured values are in excellent agreement with established luminosity-velocity amplitude relations for oscillations and provide further evidence that mode amplitudes for stars with $T_{\mathrm{eff}}<\,5500\,$K diminish in scale following a $(L/M)^{1.5}$ relation. By modeling the star's oscillation frequencies from photometric data, we measure an asteroseismic age of $4.5\pm0.9\,\rm{(ran)} \pm 1.2\,\rm{(sys)}$ Gyr. The observations demonstrate the capability of next-generation spectrographs and precise space-based photometry to extend observational asteroseismology to nearby cool dwarfs, which are benchmarks for stellar astrophysics and prime targets for directly imaging planets using future space-based telescopes.

astro-ph.SR↗

arXiv2023

Calibration Unit Design for High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC)

The latest generation of high-resolution spectrograph instruments on 10m-class telescopes continue to pursue challenging science cases. Consequently, ever more precise calibration methods are necessary to enable trail-blazing science methodology. We present the High-resolution Infrared SPectrograph for Exoplanet Characterization (HISPEC) Calibration Unit (CAL), designed to facilitate challenging science cases such as Doppler imaging of exoplanet atmospheres, precision radial velocity, and high-contrast high-resolution spectroscopy of nearby exoplanets. CAL builds upon the heritage from the pathfinder instrument Keck Planet Imager and Characterizer (KPIC) and utilizes four near-infrared (NIR) light sources encoded with wavelength information that are coupled into single-mode fibers. They can be used synchronously during science observations or asynchronously during daytime calibrations. A hollow cathode lamp (HCL) and a series of gas absorption cells provide absolute calibration from 0.98 {\mu}m to 2.5 {\mu}m. A laser frequency comb (LFC) provides stable, time-independent wavelength information during observation and CAL implements a lower finesse astro-etalon as a backup for the LFC. Design lessons from instrumentation like HISPEC will serve to inform the requirements for similar instruments for the ELTs in the future.

astro-ph.IM↗

arXiv2023

Staring at the Sun with the Keck Planet Finder: An Autonomous Solar Calibrator for High Signal-to-Noise Sun-as-a-Star Spectra

Extreme precision radial velocity (EPRV) measurements contend with internal noise (instrumental systematics) and external noise (intrinsic stellar variability) on the road to 10 cm/s "exo-Earth" sensitivity. Both of these noise sources are well-probed using "Sun-as-a-star" RVs and cross-instrument comparisons. We built the Solar Calibrator (SoCal), an autonomous system that feeds stable, disc-integrated sunlight to the recently commissioned Keck Planet Finder (KPF) at the W. M. Keck Observatory. With SoCal, KPF acquires signal-to-noise ~1200, R = ~98,000 optical (445--870 nm) spectra of the Sun in 5~sec exposures at unprecedented cadence for an EPRV facility using KPF's fast readout mode (<16 sec between exposures). Daily autonomous operation is achieved by defining an operations loop using state machine logic. Data affected by clouds are automatically flagged using a reliable quality control metric derived from simultaneous irradiance measurements. Comparing solar data across the growing global network of EPRV spectrographs with solar feeds will allow EPRV teams to disentangle internal and external noise sources and benchmark spectrograph performance. To facilitate this, all SoCal data products are immediately available to the public on the Keck Observatory Archive. We compared SoCal RVs to contemporaneous RVs from NEID, the only other immediately public EPRV solar dataset. We find agreement at the 30-40 cm/s level on timescales of several hours, which is comparable to the combined photon-limited precision. Data from SoCal were also used to assess a detector problem and wavelength calibration inaccuracies associated with KPF during early operations. Long-term SoCal operations will collect upwards of 1,000 solar spectra per six-hour day using KPF's fast readout mode, enabling stellar activity studies at high signal-to-noise on our nearest solar-type star.

astro-ph.IM↗

arXiv2023

The development of HISPEC for Keck and MODHIS for TMT: science cases and predicted sensitivities

HISPEC is a new, high-resolution near-infrared spectrograph being designed for the W.M. Keck II telescope. By offering single-shot, R=100,000 between 0.98 - 2.5 um, HISPEC will enable spectroscopy of transiting and non-transiting exoplanets in close orbits, direct high-contrast detection and spectroscopy of spatially separated substellar companions, and exoplanet dynamical mass and orbit measurements using precision radial velocity monitoring calibrated with a suite of state-of-the-art absolute and relative wavelength references. MODHIS is the counterpart to HISPEC for the Thirty Meter Telescope and is being developed in parallel with similar scientific goals. In this proceeding, we provide a brief overview of the current design of both instruments, and the requirements for the two spectrographs as guided by the scientific goals for each. We then outline the current science case for HISPEC and MODHIS, with focuses on the science enabled for exoplanet discovery and characterization. We also provide updated sensitivity curves for both instruments, in terms of both signal-to-noise ratio and predicted radial velocity precision.

astro-ph.IM↗

arXiv2022

Design of SCALES: A 2-5 Micron Coronagraphic Integral Field Spectrograph for Keck Observatory

We present the design of SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy) a new 2-5 micron coronagraphic integral field spectrograph under construction for Keck Observatory. SCALES enables low-resolution (R~50) spectroscopy, as well as medium-resolution (R~4,000) spectroscopy with the goal of discovering and characterizing cold exoplanets that are brightest in the thermal infrared. Additionally, SCALES has a 12x12" field-of-view imager that will be used for general adaptive optics science at Keck. We present SCALES's specifications, its science case, its overall design, and simulations of its expected performance. Additionally, we present progress on procuring, fabricating and testing long lead-time components.

astro-ph.IM↗

arXiv2022

Liger at Keck Observatory: Design of Imager Optical Assembly and Spectrograph Re-Imaging Optics

Liger is an adaptive optics (AO) fed imager and integral field spectrograph (IFS) designed to take advantage of the Keck All-sky Precision Adaptive-optics (KAPA) upgrade for the W.M. Keck Observatory. We present the design and analysis of the imager optical assembly including the spectrograph Re-Imaging Optics (RIO) which transfers the beam path from the imager focal plane to the IFS slicer module and lenslet array. Each imager component and the first two RIO mechanisms are assembled and individually aligned on the same optical plate. Baffling suppresses background radiation and scattered light, and a pupil viewing camera allows the imager detector to focus on an image of the telescope pupil. The optical plate mounts on an adapter frame for alignment of the overall system. The imager and RIO will be characterized in a cryogenic test chamber before installation in the final science cryostat.

astro-ph.IM↗

arXiv2022

Liger at Keck Observatory: Design of the Data Reduction System and Software Interfaces

Liger is a second generation near-infrared imager and integral field spectrograph (IFS) for the W. M. Keck Observatory that will utilize the capabilities of the Keck All-sky Precision Adaptive-optics (KAPA) system. Liger operates at a wavelength range of 0.81 {\mu}m - 2.45 {\mu}m and utilizes a slicer and a lenslet array IFS with varying spatial plate scales and fields of view resulting in hundreds of modes available to the astronomer. Because of the high level of complexity in the raw data formats for the slicer and lenslet IFS modes, Liger must be designed in conjunction with a Data Reduction System (DRS) which will reduce data from the instrument in real-time and deliver science-ready data products to the observer. The DRS will reduce raw imager and IFS frames from the readout system and provide 2D and 3D data products via custom quick-look visualization tools suited to the presentation of IFS data. The DRS will provide the reduced data to the Keck Observatory Archive (KOA) and will be available to astronomers for offline post-processing of observer data. We present an initial design for the DRS and define the interfaces between observatory and instrument software systems.

astro-ph.IM↗

arXiv2022

Liger at Keck Observatory: Imager Detector and IFS Pick-off Mirror Assembly

Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) planned for the W.M. Keck Observatory. Liger is designed to take advantage of improved adaptive optics (AO) from the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade currently underway. Liger operates at 0.84-2.45 $\mu$m with spectral resolving powers of R$\sim$4,000-10,000. Liger makes use of a sequential imager and spectrograph design allowing for simultaneous observations. There are two spectrograph modes: a lenslet with high spatial sampling of 14 and 31 mas, and a slicer with 75 and 150 mas sampling with an expanded field of view. Two pick-off mirrors near the imager detector direct light to these two IFS channels. We present the design and structural analysis for the imager detector and IFS pick-off mirror mounting assembly that will be used to align and maintain stability throughout its operation. A piezoelectric actuator will be used to step through $\rm3\,mm$ of travel during alignment of the instrument to determine the optimal focus for both the detector and pick-off mirrors which will be locked in place during normal operation. We will demonstrate that the design can withstand the required gravitational and shipping loads and can be aligned within the positioning tolerances for the optics.

astro-ph.IM↗

arXiv2021

Liger for Next Generation Keck AO: Filter Wheel and Pupil Design

Liger is a next-generation near-infrared imager and integral field spectrograph (IFS) for the W.M. Keck Observatory designed to take advantage of the Keck All-Sky Precision Adaptive Optics (KAPA) upgrade. Liger will operate at spectral resolving powers between R$\sim$4,000 - 10,000 over a wavelength range of 0.8-2.4$\mu$m. Liger takes advantage of a sequential imager and spectrograph design that allows for simultaneous observations between the two channels using the same filter wheel and cold pupil stop. We present the design for the filter wheels and pupil mask and their location and tolerances in the optical design. The filter mechanism is a multi-wheel design drawing from the heritage of the current Keck/OSIRIS imager single wheel design. The Liger multi-wheel configuration is designed to allow future upgrades to the number and range of filters throughout the life of the instrument. The pupil mechanism is designed to be similarly upgradeable with the option to add multiple pupil mask options. A smaller wheel mechanism allows the user to select the desired pupil mask with open slots being designed in for future upgrade capabilities. An ideal pupil would match the shape of the image formed of the primary and would track its rotation. For different pupil shapes without tracking we model the additional exposure time needed to achieve the same signal to noise of an ideal pupil and determine that a set of fixed masks of different shapes provides a mechanically simpler system with little compromise in performance.

astro-ph.IM↗

arXiv2021

Liger for Next Generation Keck Adaptive Optics: Opto-Mechanical Dewar for Imaging Camera and Slicer

Liger is a next generation adaptive optics (AO) fed integral field spectrograph (IFS) and imager for the W. M. Keck Observatory. This new instrument is being designed to take advantage of the upgraded AO system provided by Keck All-Sky Precision Adaptive-optics (KAPA). Liger will provide higher spectral resolving power (R$\sim$4,000-10,000), wider wavelength coverage ($\sim$0.8-2.4 $\mu$m), and larger fields of view than any current IFS. We present the design and analysis for a custom-made dewar chamber for characterizing the Liger opto-mechanical system. This dewar chamber is designed to test and assemble the Liger imaging camera and slicer IFS components while being adaptable for future experiments. The vacuum chamber will operate below $10^{-5}$ Torr with a cold shield that will be kept below 90 K. The dewar test chamber will be mounted to an optical vibration isolation platform and further isolated from the cryogenic and vacuum systems with bellows. The cold head and vacuums will be mounted to a custom cart that will also house the electronics and computer that interface with the experiment. This test chamber will provide an efficient means of calibrating and characterizing the Liger instrument and performing future experiments.

astro-ph.IM↗

arXiv2020

Update on the Preliminary Design of SCALES: the Santa Cruz Array of Lenslets for Exoplanet Spectroscopy

SCALES (Santa Cruz Array of Lenslets for Exoplanet Spectroscopy) is a 2-5 micron high-contrast lenslet integral-field spectrograph (IFS) driven by exoplanet characterization science requirements and will operate at W. M. Keck Observatory. Its fully cryogenic optical train uses a custom silicon lenslet array, selectable coronagraphs, and dispersive prisms to carry out integral field spectroscopy over a 2.2 arcsec field of view at Keck with low ($<300$) spectral resolution. A small, dedicated section of the lenslet array feeds an image slicer module that allows for medium spectral resolution ($5000-10 000$), which has not been available at the diffraction limit with a coronagraphic instrument before. Unlike previous IFS exoplanet instruments, SCALES is capable of characterizing cold exoplanet and brown dwarf atmospheres ($<600$ K) at bandpasses where these bodies emit most of their radiation while capturing relevant molecular spectral features.

astro-ph.IM↗

arXiv2018

An overview of the NIRSPEC upgrade for the Keck II telescope

NIRSPEC is a 1-5 micron echelle spectrograph in use on the Keck II Telescope since 1999. The spectrograph is capable of both moderate (R~2,000) and high (R~25,000) resolution observations and has been a workhorse instrument across many astronomical fields, from planetary science to extragalactic observations. In the latter half of 2018, we will upgrade NIRSPEC to improve the sensitivity and stability of the instrument and increase its lifetime. The major components of the upgrade include replacing the spectrometer and slit-viewing camera detectors with Teledyne H2RG arrays and replacing all transputer-based electronics. We present detailed design, testing, and analysis of the upgraded instrument, including the finalized optomechanical design of the new 1-5 micron slit-viewing camera, final alignment and assembly of the science array, electronics systems, and updated software design.

astro-ph.IM↗

arXiv2015

The Team Keck Redshift Survey 2: MOSFIRE Spectroscopy of the GOODS-North Field

We present the Team Keck Redshift Survey 2 (TKRS2), a near-infrared spectral observing program targeting selected galaxies within the CANDELS subsection of the GOODS-North Field. The TKRS2 program exploits the unique capabilities of MOSFIRE, an infrared multi-object spectrometer which entered service on the Keck I telescope in 2012 and contributes substantially to the study of galaxy spectral features at redshifts inaccessible to optical spectrographs. The TKRS2 project targets 97 galaxies drawn from samples that include z~2 emission-line galaxies with features observable in the JHK bands as well as lower-redshift targets with features in the Y band. We present a detailed measurement of MOSFIRE's sensitivity as a function of wavelength, including the effects of telluric features across the YJHK filters. The largest utility of our survey is in providing rest-frame-optical emission lines for z>1 galaxies, and we demonstrate that the ratios of strong, optical emission lines of z~2 galaxies suggest the presence of either higher N/O abundances than are found in z~0 galaxies or low-metallicity gas ionized by an active galactic nucleus. We have released all TKRS2 data products into the public domain to allow researchers access to representative raw and reduced MOSFIRE spectra.

astro-ph.GA↗