arXiv subjects

Marc L. DeRosa

Publications and source records attributed to Marc L. DeRosa.

16 recordsLinked to original sources

arXiv2026

Simulating the Solar Corona with Multiple Solar Photospheric Magnetic Maps during the 8 April 2024 Total Solar Eclipse

The 8 April 2024 total solar eclipse (TSE) provides a unique opportunity to study the solar corona. This work presents our simulations of the solar corona at the time of the eclipse based on magnetohydrodynamic (MHD) modeling performed with the Alfvén Wave Solar atmosphere Model (AWSoM) in the Space Weather Modeling Framework, developed at the University of Michigan. We performed multiple simulations based on photospheric magnetic maps from four sources, i.e., ADAPT-GONG, Lockheed Martin ESFAM-HMI, HipFT-HMI, and NSO-NRT-HMI maps. Our study focuses on how differences in the magnetic field maps affect the coronal magnetic field structure and coronal heating properties in the simulation. The synthesized observables show remarkable differences due to the distinct magnetic coronal topologies, which stem from the different local magnetic flux distributions. We analyze the properties of the open magnetic flux regions of the models. We also study the coronal heating rate in the models. The total volume integrated heating rate yields a difference of $20\%$ across the models. The results also show that the differential emission measure in the high-temperature regions is sensitive to the magnetic field maps. Our findings underscore the importance of comprehensive photospheric magnetic field data in improving future solar coronal models.

astro-ph.SR↗

arXiv2024

Ensemble Kalman Filter Data Assimilation Into Surface Flux Transport Model To Infer Surface Flows: An Observing System Simulation Experiment

Knowledge of the global magnetic field distribution and its evolution on the Sun's surface is crucial for modeling the coronal magnetic field, understanding solar wind dynamics, computing the heliospheric open flux distribution and predicting solar cycle strength. As the far side of the Sun cannot be observed directly and high-latitude observations always suffer from projection effects, we often rely on surface flux transport simulations (SFT) to model long-term global magnetic field distribution. Meridional circulation, the large-scale north-south component of the surface flow profile, is one of the key components of the SFT simulation that requires further constraints near high latitudes. Prediction of the photospheric magnetic field distribution requires knowledge of the flow profile in the future, which demands reconstruction of that same flow at the current time so that it can be estimated at a later time. By performing Observing System Simulation Experiments, we demonstrate how the Ensemble Kalman Filter technique, when used with a SFT model, can be utilized to make ``posterior'' estimates of flow profiles into the future that can be used to drive the model forward to forecast photospheric magnetic field distribution.

astro-ph.SR↗

arXiv2023

Global MHD Simulations of the Time-Dependent Corona

We describe, test, and apply a technique to incorporate full-sun, surface flux evolution into an MHD model of the global solar corona. Requiring only maps of the evolving surface flux, our method is similar to that of Lionello et al. (2013), but we introduce two ways to correct the electric field at the lower boundary to mitigate spurious currents. We verify the accuracy of our procedures by comparing to a reference simulation, driven with known flows and electric fields. We then present a thermodynamic MHD calculation lasting one solar rotation driven by maps from the magnetic flux evolution model of Schrijver & DeRosa (2003). The dynamic, time-dependent nature of the model corona is illustrated by examining the evolution of the open flux boundaries and forward modeled EUV emission, which evolve in response to surface flows and the emergence and cancellation flux. Although our main goal is to present the method, we briefly investigate the relevance of this evolution to properties of the slow solar wind, examining the mapping of dipped field lines to the topological signatures of the "S-Web" and comparing charge state ratios computed in the time-dependently driven run to a steady state equivalent. Interestingly, we find that driving on its own does not significantly improve the charge states ratios, at least in this modest resolution run that injects minimal helicity. Still, many aspects of the time-dependently driven model cannot be captured with traditional steady-state methods, and such a technique may be particularly relevant for the next generation of solar wind and CME models.

astro-ph.SR↗

arXiv2023

Implications of Different Solar Photospheric Flux-Transport Models for Global Coronal and Heliospheric Modeling

The concept of surface-flux transport (SFT) is commonly used in evolving models of the large-scale solar surface magnetic field. These photospheric models are used to determine the large-scale structure of the overlying coronal magnetic field, as well as to make predictions about the fields and flows that structure the solar wind. We compare predictions from two SFT models for the solar wind, open magnetic field footpoints, and the presence of coronal magnetic null points throughout various phases of a solar activity cycle, focusing on the months of April in even-numbered years between 2012 and 2020, inclusive. We find that there is a solar cycle dependence to each of the metrics considered, but there is not a single phase of the cycle in which all the metrics indicate good agreement between the models. The metrics also reveal large, transient differences between the models when a new active region is rotating into the assimilation window. The evolution of the surface flux is governed by a combination of large scale flows and comparatively small scale motions associated with convection. Because the latter flows evolve rapidly, there are intervals during which their impact on the surface flux can only be characterized in a statistical sense, thus their impact is modeled by introducing a random evolution that reproduces the typical surface flux evolution. We find that the differences between the predicted properties are dominated by differences in the model assumptions and implementation, rather than selection of a particular realization of the random evolution.

astro-ph.SR↗

arXiv2022

Large-Scale Spatial Cross-Calibration of Hinode/SOT-SP and SDO/HMI

We investigate the cross-calibration of the Hinode/SOT-SP and SDO/HMI instrument meta-data, specifically the correspondence of the scaling and pointing information. Accurate calibration of these datasets gives the correspondence needed by inter-instrument studies and learning-based magnetogram systems, and is required for physically-meaningful photospheric magnetic field vectors. We approach the problem by robustly fitting geometric models on correspondences between images from each instrument's pipeline. This technique is common in computer vision, but several critical details are required when using scanning slit spectrograph data like Hinode/SOT-SP. We apply this technique to data spanning a decade of the Hinode mission. Our results suggest corrections to the published Level 2 Hinode/SOT-SP data. First, an analysis on approximately 2,700 scans suggests that the reported pixel size in Hinode/SOT-SP Level 2 data is incorrect by around 1%. Second, analysis of over 12,000 scans show that the pointing information is often incorrect by dozens of arcseconds with a strong bias. Regression of these corrections indicates that thermal effects have caused secular and cyclic drift in Hinode/SOT-SP pointing data over its mission. We offer two solutions. First, direct co-alignment with SDO/HMI data via our procedure can improve alignments for many Hinode/SOT-SP scans. Second, since the pointing errors are predictable, simple post-hoc corrections can substantially improve the pointing. We conclude by illustrating the impact of this updated calibration on derived physical data products needed for research and interpretation. Among other things, our results suggest that the pointing errors induce a hemispheric bias in estimates of radial current density.

astro-ph.SR↗

arXiv2022

Coronal Mass Ejections and Dimmings: A Comparative Study using MHD Simulations and SDO Observations

Solar coronal dimmings have been observed extensively in the past two decades. Due to their close association with coronal mass ejections (CMEs), there is a critical need to improve our understanding of the physical processes that cause dimmings as well as their relationship with CMEs. In this study, we investigate coronal dimmings by combining simulation and observational efforts. By utilizing a data-constrained global magnetohydrodynamics model (AWSoM: Alfven-wave Solar Model), we simulate coronal dimmings resulting from different CME energetics and flux rope configurations. We synthesize the emissions of different EUV spectral bands/lines and compare with SDO/AIA and EVE observations. A detailed analysis of the simulation and observation data suggests that the transient dimming / brightening are related to plasma heating processes, while the long-lasting core and remote dimmings are caused by mass loss process induced by the CME. Moreover, the interaction between the erupting flux rope with different orientations and the global solar corona could significantly influence the coronal dimming patterns. Using metrics such as dimming depth and dimming slope, we investigate the relationship between dimmings and CME properties (e.g., CME mass, CME speed) in the simulation. Our result suggests that coronal dimmings encode important information about the associated CMEs, which provides a physical basis for detecting stellar CMEs from distant solar-like stars.

astro-ph.SR↗

arXiv2021

Torus-Stable Zone Above Starspots

Whilst intense solar flares are almost always accompanied by a coronal mass ejection (CME), reports on stellar CMEs are rare, despite the frequent detection of stellar 'super flares'. The torus instability of magnetic flux ropes is believed to be one of the main driving mechanisms of solar CMEs. Suppression of the torus instability, due to a confining background coronal magnetic field that decreases sufficiently slowly with height, may contribute to the lack of stellar CME detection. Here we use the solar magnetic field as a template to estimate the vertical extent of this 'torus-stable zone' (TSZ) above a stellar active region. For an idealised potential field model comprising the fields of a local bipole (mimicking a pair of starspots) and a global dipole, we show that the upper bound of the TSZ increases with the bipole size, the dipole strength, and the source surface radius where the coronal field becomes radial. The boundaries of the TSZ depend on the interplay between the spots' and the dipole's magnetic fields, which provide the local- and global-scale confinement, respectively. They range from about half the bipole size to a significant fraction of the stellar radius. For smaller spots and an intermediate dipole field, a secondary TSZ arises at a higher altitude, which may increase the likelihood of 'failed eruptions'. Our results suggest that the low apparent CME occurrence rate on cool stars is, at least partially, due to the presence of extended TSZs.

astro-ph.SR↗

arXiv2020

The Coronal Global Evolutionary Model: Using HMI Vector Magnetogram and Doppler Data to Determine Coronal Magnetic Field Evolution

The Coronal Global Evolutionary Model (CGEM) provides data-driven simulations of the magnetic field in the solar corona to better understand the build-up of magnetic energy that leads to eruptive events. The CGEM project has developed six capabilities. CGEM modules (1) prepare time series of full-disk vector magnetic field observations to (2) derive the changing electric field in the solar photosphere over active-region scales. This local electric field is (3) incorporated into a surface flux transport model that reconstructs a global electric field that evolves magnetic flux in a consistent way. These electric fields drive a (4) 3D spherical magneto-frictional (SMF) model, either at high-resolution over a restricted range of solid angle or at lower resolution over a global domain, to determine the magnetic field and current density in the low corona. An SMF-generated initial field above an active region and the evolving electric field at the photosphere are used to drive (5) detailed magneto-hydrodynamic (MHD) simulations of active regions in the low corona. SMF or MHD solutions are then used to compute emissivity proxies that can be compared with coronal observations. Finally, a lower-resolution SMF magnetic field is used to initialize (6) a global MHD model that is driven by an SMF electric-field time series to simulate the outer corona and heliosphere, ultimately connecting Sun to Earth. As a demonstration, this report features results of CGEM applied to observations of the evolution of NOAA Active Region 11158 in February 2011.

astro-ph.SR↗

arXiv2020

Sun-as-a-star Spectral Irradiance Observations of Transiting Active Regions

Major solar flares are prone to occur in active region atmospheres associated with large, complex, dynamically-evolving sunspots. This points to the importance of monitoring the evolution of starspots, not only in visible but also in ultra violet (UV) and X-rays, in understanding the origin and occurrence of stellar flares. To this end, we perform spectral irradiance analysis on different types of transiting solar active regions by using a variety of full-disk synoptic observations. The target events are an isolated sunspot, spotless plage, and emerging flux in prolonged quiet-Sun conditions selected from the past decade. We find that the visible continuum and total solar irradiance become darkened when the spot is at the central meridian, whereas it is bright near the solar limb; UV bands sensitive to the chromosphere correlate well with the variation of total unsigned magnetic flux in the photosphere; amplitudes of EUV and soft X-ray increase with the characteristic temperature, whose light curves are flat-topped due to their sensitivity to the optically thin corona; the transiting spotless plage does not show the darkening in the visible irradiance, while the emerging flux produces an asymmetry in all light curves about the central meridian. The multi-wavelength sun-as-a-star study described here indicates that such time lags between the coronal and photospheric light curves have the potential to probe the extent of coronal magnetic fields above the starspots. In addition, EUV wavelengths that are sensitive to the transition-region temperature sometimes show anti-phased variations, which may be used for diagnosing plasmas around starspots.

astro-ph.SR↗

arXiv2020

The PDFI_SS Electric Field Inversion Software

We describe the PDFI_SS software library, which is designed to find the electric field at the Sun's photosphere from a sequence of vector magnetogram and Doppler velocity measurements, and estimates of horizontal velocities obtained from local correlation tracking using the recently upgraded FLCT code. The library, a collection of Fortran subroutines, uses the "PDFI" technique described by Kazachenko et al. (2014), but modified for use in spherical, Plate-Carrée geometry on a staggered grid. The domain over which solutions are found is a subset of the global spherical surface, defined by user-specified limits of colatitude and longitude. Our staggered-grid approach, based on that of Yee (1966), is more conservative and self-consistent compared to the centered, Cartesian grid used by Kazachenko et al. (2014). The library can be used to compute an end-to-end solution for electric fields from data taken by the HMI instrument aboard NASA's SDO Mission. This capability has been incorporated into the HMI pipeline processing system operating at SDO's JSOC. The library is written in a general and modular way so that the calculations can be customized to modify or delete electric field contributions, or used with other data sets. Other applications include "nudging" numerical models of the solar atmosphere to facilitate assimilative simulations. The library includes an ability to compute "global" (whole-Sun) electric field solutions. The library also includes an ability to compute Potential Magnetic Field solutions in spherical coordinates. This distribution includes a number of test programs which allow the user to test the software.

astro-ph.SR↗

arXiv2020

Coronal Dimming as a Proxy for Stellar Coronal Mass Ejections

Solar coronal dimmings have been observed extensively in the past two decades and are believed to have close association with coronal mass ejections (CMEs). Recent study found that coronal dimming is the only signature that could differentiate powerful ares that have CMEs from those that do not. Therefore, dimming might be one of the best candidates to observe the stellar CMEs on distant Sun-like stars. In this study, we investigate the possibility of using coronal dimming as a proxy to diagnose stellar CMEs. By simulating a realistic solar CME event and corresponding coronal dimming using a global magnetohydrodynamics model (AWSoM: Alfven-wave Solar Model), we first demonstrate the capability of the model to reproduce solar observations. We then extend the model for simulating stellar CMEs by modifying the input magnetic flux density as well as the initial magnetic energy of the CME flux rope. Our result suggests that with improved instrument sensitivity, it is possible to detect the coronal dimming signals induced by the stellar CMEs.

astro-ph.SR↗

arXiv2018

Does Nearby Open Flux Affect the Eruptivity of Solar Active Regions?

The most energetic solar flares are typically associated with the ejection of a cloud of coronal material into the heliosphere in the form of a coronal mass ejection (CME). However, there exist large flares which are not accompanied by a CME. The existence of these non-eruptive flares raises the question of whether such flares suffer from a lack of access to nearby open fields in the vicinity above the flare (reconnection) site. In this study, we use a sample of 56 flares from Sunspot Cycles 23 and 24 to test whether active regions that produce eruptive X-class flares are preferentially located near coronal magnetic field domains that are open to the heliosphere, as inferred from a potential field source surface model. The study shows that X-class flares having access to open fields are eruptive at a higher rate than those for which access is lacking. The significance of this result should be moderated due to the small number of non-eruptive X-class flares in the sample, based on the associated Bayes factor.

astro-ph.SR↗

arXiv2015

The Coronal Global Evolutionary Model: Using HMI Vector Magnetogram and Doppler Data to Model the Buildup of Free Magnetic Energy in the Solar Corona

The most violent space weather events (eruptive solar flares and coronal mass ejections) are driven by the release of free magnetic energy stored in the solar corona. Energy can build up on timescales of hours to days, and then may be suddenly released in the form of a magnetic eruption, which then propagates through interplanetary space, possibly impacting the Earth's space environment. Can we use the observed evolution of the magnetic and velocity fields in the solar photosphere to model the evolution of the overlying solar coronal field, including the storage and release of magnetic energy in such eruptions? The objective of CGEM, the Coronal Global Evolutionary Model, funded by the NASA/NSF Space Weather Modeling program, is to develop and evaluate such a model for the evolution of the coronal magnetic field. The evolving coronal magnetic field can then be used as a starting point for magnetohydrodynamic (MHD) models of the corona, which can then be used to drive models of heliospheric evolution and predictions of magnetic field and plasma density conditions at 1AU.

astro-ph.SR↗

arXiv2012

A Method for Data-Driven Simulations of Evolving Solar Active Regions

We present a method for performing data-driven simulations of solar active region formation and evolution. The approach is based on magnetofriction, which evolves the induction equation assuming the plasma velocity is proportional to the Lorentz force. The simulations of active region coronal field are driven by temporal sequences of photospheric magnetograms from the Helioseismic Magnetic Imager (HMI) instrument onboard the Solar Dynamics Observatory (SDO). Under certain conditions, the data-driven simulations produce flux ropes that are ejected from the modeled active region due to loss of equilibrium. Following the ejection of flux ropes, we find an enhancement of the photospheric horizontal field near the polarity inversion line. We also present a method for the synthesis of mock coronal images based on a proxy emissivity calculated from the current density distribution in the model. This method yields mock coronal images that are somewhat reminiscent of images of active regions taken by instruments such as SDO's Atmospheric Imaging Assembly (AIA) at extreme ultraviolet wavelengths.

astro-ph.SR↗

arXiv2012

First 3D Reconstructions of Coronal Loops with the STEREO A+B Spacecraft: IV. Magnetic Modeling with Twisted Force-Free Fields

The three-dimensional (3D) coordinates of stereoscopically triangulated loops provide strong constraints for magnetic field models of active regions in the solar corona. Here we use STEREO/A and B data from some 500 stereoscopically triangulated loops observed in four active regions (2007 Apr 30, May 9, May 19, Dec 11), together with SOHO/MDI line-of-sight magnetograms. We measure the average misalignment angle between the stereoscopic loops and theoretical magnetic field models, finding a mismatch of $μ=19^\circ-46^\circ$ for a potential field model, which is reduced to $μ=14^\circ-19^\circ$ for a non-potential field model parameterized by twist parameters. The residual error is commensurable with stereoscopic measurement errors ($μ_{SE} \approx 8^\circ-12^\circ$). We developed a potential field code that deconvolves a line-of-sight magnetogram into three magnetic field components $(B_x, B_y, B_z)$, as well as a non-potential field forward-fitting code that determines the full length of twisted loops ($L \approx 50-300$ Mm), the number of twist turns (median $N_{twist}=0.06$), the nonlinear force-free $α$-parameter (median $α\approx 4 \times 10^{-11}$ cm$^{-1}$), and the current density (median $j_z \approx 1500$ Mx cm$^{-2}$ s$^{-1}$). All twisted loops are found to be far below the critical value for kink instability, and Joule dissipation of their currents is found be be far below the coronal heating requirement. The algorithm developed here, based on an analytical solution of nonlinear force-free fields that is accurate to second order (in the force-free parameter $α$), represents the first code that enables fast forward-fitting to photospheric magnetograms and stereoscopically triangulated loops in the solar corona.

astro-ph.SR↗

arXiv2009

A Critical Assessment of Nonlinear Force-Free Field Modeling of the Solar Corona for Active Region 10953

Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less successful in application to real solar data. Different NLFFF models have been found to have markedly different field line configurations and to provide widely varying estimates of the magnetic free energy in the coronal volume, when applied to solar data. NLFFF models require consistent, force-free vector magnetic boundary data. However, vector magnetogram observations sampling the photosphere, which is dynamic and contains significant Lorentz and buoyancy forces, do not satisfy this requirement, thus creating several major problems for force-free coronal modeling efforts. In this article, we discuss NLFFF modeling of NOAA Active Region 10953 using Hinode/SOT-SP, Hinode/XRT, STEREO/SECCHI-EUVI, and SOHO/MDI observations, and in the process illustrate the three such issues we judge to be critical to the success of NLFFF modeling: (1) vector magnetic field data covering larger areas are needed so that more electric currents associated with the full active regions of interest are measured, (2) the modeling algorithms need a way to accommodate the various uncertainties in the boundary data, and (3) a more realistic physical model is needed to approximate the photosphere-to-corona interface in order to better transform the forced photospheric magnetograms into adequate approximations of nearly force-free fields at the base of the corona. We make recommendations for future modeling efforts to overcome these as yet unsolved problems.

astro-ph.SR↗