arXiv subjects

Marc Z. Miskin

Publications and source records attributed to Marc Z. Miskin.

9 recordsLinked to original sources

arXiv2025

Microscopic Robots That Sense, Think, Act, and Compute

While miniaturization has been a goal in robotics for nearly 40 years, roboticists have struggled to access sub-millimeter dimensions without making sacrifices to on-board information processing due to the unique physics of the microscale. Consequently, microrobots often lack the key features that distinguish their macroscopic cousins from other machines, namely on-robot systems for decision making, sensing, feedback, and programmable computation. Here, we take up the challenge of building a microrobot comparable in size to a single-celled paramecium that can sense, think, and act using onboard systems for computation, sensing, memory, locomotion, and communication. Built massively in parallel with fully lithographic processing, these microrobots can execute digitally defined algorithms and autonomously change behavior in response to their surroundings. Combined, these results pave the way for general purpose microrobots that can be programmed many times in a simple setup, cost under $0.01 per machine, and work together to carry out tasks without supervision in uncertain environments.

cs.RO↗

arXiv2025

Artificial Spacetimes for Reactive Control of Resource-Limited Robots

Field-based reactive control provides a minimalist, decentralized route to guiding robots that lack onboard computation. Such schemes are well suited to resource-limited machines like microrobots, yet implementation artifacts, limited behaviors, and the frequent lack of formal guarantees blunt adoption. Here, we address these challenges with a new geometric approach called artificial spacetimes. We show that reactive robots navigating control fields obey the same dynamics as light rays in general relativity. This surprising connection allows us to adopt techniques from relativity and optics for constructing and analyzing control fields. When implemented, artificial spacetimes guide robots around structured environments, simultaneously avoiding boundaries and executing tasks like rallying or sorting, even when the field itself is static. We augment these capabilities with formal tools for analyzing what robots will do and provide experimental validation with silicon-based microrobots. Combined, this work provides a new framework for generating composed robot behaviors with minimal overhead.

cs.RO↗

arXiv2024

Electrokinetic Propulsion for Electronically Integrated Microscopic Robots

Semiconductor microelectronics are emerging as a powerful tool for building smart, autonomous robots too small to see with the naked eye. Yet a number of existing microrobot platforms, despite significant advantages in speed, robustness, power consumption, or ease of fabrication, have no clear path towards electronics integration, limiting their intelligence and sophistication when compared to electronic cousins. Here, we show how to upgrade a self-propelled particle into an an electronically integrated microrobot, reaping the best of both in a single design. Inspired by electrokinetic micromotors, these robots generate electric fields in a surrounding fluid, and by extension propulsive electrokinetic flows. The underlying physics is captured by a model in which robot speed is proportional to applied current, making design and control straightforward. As proof, we build basic robots that use on-board circuits and a closed-loop optical control scheme to navigate waypoints and move in coordinated swarms at speeds of up to one body length per second. Broadly, the unification of micromotor propulsion with on-robot electronics clears the way for robust, fast, easy to manufacture, electronically programmable microrobots that operate reliably over months to years.

cs.RO↗

arXiv2022

Emergent Microrobotic Oscillators via Asymmetry-Induced Order

Spontaneous low-frequency oscillations on the order of several hertz are the drivers of many crucial processes in nature. From bacterial swimming to mammal gaits, the conversion of static energy inputs into slowly oscillating electrical and mechanical power is key to the autonomy of organisms across scales. However, the fabrication of slow artificial oscillators at micrometre scales remains a major roadblock towards the development of fully-autonomous microrobots. Here, we report the emergence of a low-frequency relaxation oscillator from a simple collective of active microparticles interacting at the air-liquid interface of a peroxide drop. Their collective oscillations form chemomechanical and electrochemical limit cycles that enable the transduction of ambient chemical energy into periodic mechanical motion and on-board electrical currents. Surprisingly, the collective can oscillate robustly even as more particles are introduced, but only when we add a single particle with modified reactivity to intentionally break the system's permutation symmetry. We explain such emergent order through a novel thermodynamic mechanism for asymmetry-induced order. The energy harvested from the stabilized system oscillations enables the use of on-board electronic components, which we demonstrate by cyclically and synchronously driving microrobotic arms. This work highlights a new strategy for achieving low-frequency oscillations at the microscale that are otherwise difficult to observe outside of natural systems, paving the way for future microrobotic autonomy.

nlin.AO↗

arXiv2021

Physical learning beyond the quasistatic limit

Physical networks, such as biological neural networks, can learn desired functions without a central processor, using local learning rules in space and time to learn in a fully distributed manner. Learning approaches such as equilibrium propagation, directed aging, and coupled learning similarly exploit local rules to accomplish learning in physical networks such as mechanical, flow, or electrical networks. In contrast to certain natural neural networks, however, such approaches have so far been restricted to the quasistatic limit, where they learn on time scales slow compared to their physical relaxation. This quasistatic constraint slows down learning, limiting the use of these methods as machine learning algorithms, and potentially restricting physical networks that could be used as learning platforms. Here we explore learning in an electrical resistor network that implements coupled learning, both in the lab and on the computer, at rates that range from slow to far above the quasistatic limit. We find that up to a critical threshold in the ratio of the learning rate to the physical rate of relaxation, learning speeds up without much change of behavior or error. Beyond the critical threshold, the error exhibits oscillatory dynamics but the networks still learn successfully.

cond-mat.dis-nn↗

arXiv2020

Bidirectional Self-Folding with Atomic Layer Deposition Nanofilms for Microscale Origami

Origami design principles are scale invariant and enable direct miniaturization of origami structures provided the sheets used for folding have equal thickness to length ratios. Recently, seminal steps have been taken to fabricate microscale origami using unidirectionally actuated sheets with nanoscale thickness. Here, we extend the full power of origami-inspired fabrication to nanoscale sheets by engineering bidirectional folding with 4 nm thick atomic layer deposition (ALD) SiNx-SiO2 bilayer films. Strain differentials within these bilayers result in bending, producing microscopic radii of curvature. We lithographically pattern these bilayers and localize the bending using rigid panels to fabricate a variety of complex micro-origami devices. Upon release, these devices self-fold according to prescribed patterns. Our approach combines planar semiconductor microfabrication methods with computerized origami design, making it easy to fabricate and deploy such microstructures en masse. These devices represent an important step forward in the fabrication and assembly of deployable micromechanical systems that can interact with and manipulate micro- and nanoscale environments.

physics.app-ph↗

arXiv2015

Turning Statistical Physics Models Into Materials Design Engines

Despite the success statistical physics has enjoyed at predicting the properties of materials for given parameters, the inverse problem, identifying which material parameters produce given, desired properties, is only beginning to be addressed. Recently, several methods have emerged across disciplines that draw upon optimization and simulation to create computer programs that tailor material responses to specified behaviors. However, so far the methods developed either involve black-box techniques, in which the optimizer operates without explicit knowledge of the material's configuration space, or they require carefully tuned algorithms with applicability limited to a narrow subclass of materials. Here we introduce a formalism that can generate optimizers automatically by extending statistical mechanics into the realm of design. The strength of this new approach lies in its capability to transform statistical models that describe materials into optimizers to tailor them. By comparing against standard black-box optimization methods, we demonstrate how optimizers generated by this formalism can be faster and more effective, while remaining straightforward to implement. The scope of our approach includes new possibilities for solving a variety of complex optimization and design problems concerning materials both in and out of equilibrium.

cond-mat.stat-mech↗

arXiv2014

Evolving Design Rules for the Inverse Granular Packing Problem

If a collection of identical particles is poured into a container, different shapes will fill to different densities. But what is the shape that fills a container as close as possible to a pre-specified, desired density? We demonstrate a solution to this inverse-packing problem by framing it in the context of artificial evolution. By representing shapes as bonded spheres, we show how shapes may be mutated, simulated, and selected to produce particularly dense or loose packing aggregates, both with and without friction. Moreover, we show how motifs emerge linking these shapes together. The result is a set of design rules that function as an effective solution to the inverse packing problem for given packing procedures and boundary conditions. Finally, we show that these results are verified by experiments on 3D-printed prototypes used to make packings in the real world.

cond-mat.soft↗

arXiv2013

Particle Shape Effects on the Stress Response of Granular Packings

We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-defined initial packing states were established through preconditioning by cyclic loading under given confinement pressure. Starting from such initial states, stress-strain relationships for axial compression were obtained at four different confining pressures for each particle type. While confining pressure has the largest overall effect on the mechanical response, we find that particle shape controls the details of the stress-strain curves and can be used to tune packing stiffness and yielding. By correlating the experimentally measured values for the effective Young's modulus under compression, yield stress and energy loss during cyclic loading, we identify trends among the various shapes that allow for designing a packing's aggregate behavior.

cond-mat.soft↗