arXiv subjects

Marco Delbo

Publications and source records attributed to Marco Delbo.

50 records · Page 3Linked to original sources

arXiv2017

ASIME 2016 White Paper: In-Space Utilisation of Asteroids: "Answers to Questions from the Asteroid Miners"

The aim of the Asteroid Science Intersections with In-Space Mine Engineering (ASIME) 2016 conference on September 21-22, 2016 in Luxembourg City was to provide an environment for the detailed discussion of the specific properties of asteroids, with the engineering needs of space missions that utilize asteroids. The ASIME 2016 Conference produced a layered record of discussions from the asteroid scientists and the asteroid miners to understand each other's key concerns and to address key scientific questions from the asteroid mining companies: Planetary Resources, Deep Space Industries and TransAstra. These Questions were the focus of the two day conference, were addressed by scientists inside and outside of the ASIME Conference and are the focus of this White Paper. The Questions from the asteroid mining companies have been sorted into the three asteroid science themes: 1) survey, 2) surface and 3) subsurface and 4) Other. The answers to those Questions have been provided by the scientists with their conference presentations or edited directly into an early open-access collaborative Google document (August 2016-October 2016), or inserted by A. Graps using additional reference materials. During the ASIME 2016 last two-hours, the scientists turned the Questions from the Asteroid Miners around by presenting their own key concerns: Questions from the Asteroid Scientists . These answers in this White Paper will point to the Science Knowledge Gaps (SKGs) for advancing the asteroid in-space resource utilisation domain.

astro-ph.EP↗

arXiv2017

The Origins of Asteroidal Rock Disaggregation: Interplay of Thermal Fatigue and Microstructure

The distributions of size and chemical composition in the regolith on airless bodies provides clues to the evolution of the solar system. Recently, the regolith on asteroid (25143) Itokawa, visited by the JAXA Hayabusa spacecraft, was observed to contain millimeter to centimeter sized particles. Itokawa boulders commonly display well-rounded profiles and surface textures that appear inconsistent with mechanical fragmentation during meteorite impact; the rounded profiles have been hypothesized to arise from rolling and movement on the surface as a consequence of seismic shaking. We provide a possible explanation of these observations by exploring the primary crack propagation mechanisms during thermal fatigue of a chondrite. We present the in situ evolution of the full-field strains on the surface as a function of temperature and microstructure, and observe and quantify the crack growth during thermal cycling. We observe that the primary fatigue crack path preferentially follows the interfaces between monominerals, leaving them intact after fragmentation. These observations are explained through a microstructure-based finite element model that is quantitatively compared with our experimental results. These results on the interactions of thermal fatigue cracking with the microstructure may ultimately allow us to distinguish between thermally induced fragments and impact products.

astro-ph.EP↗

arXiv2016

Survival of the impactor during hypervelocity collisions II: An analogue for high porosity targets

We investigated how a target's porosity affects the outcome of a collision, with respect to the impactor's fate. Laboratory impact experiments using peridot projectiles were performed at a speed range between 0.3 and 3.0 km/s, onto high porosity water-ice (40%) and fine-grained calcium carbonate (70%) targets. We report that the amount of implanted material in the target body increases with increasing target's porosity, while the size frequency distribution of the projectile's ejecta fragments becomes steeper. A supplementary Raman study showed no sign of change of the Raman spectra of the recovered olivine projectile fragments indicate minimal physical change.

astro-ph.EP↗

arXiv2016

Yarkovsky V-shape identification of asteroid families

There are only a few known main belt (MB) asteroid families with ages greater than 2 Gyr (Brož et al. 2013, Spoto et al. 2015). Estimates based on the family producing collision rate suggest that the lack of >2 Gyr-old families may be due to a selection bias in current techniques used to identify families. Family fragments disperse in their orbital elements, semi-major axis, $a$, eccentricity, $e$, and inclination, $i$, due to secular resonances, close encounters with massive asteroids and the non-gravitational Yarkovsky force. This causes the family fragments to be indistinguishable from the background of the main belt making them more difficult to identify with the hierarchical clustering method (HCM) with increasing family age. The discovery of the Eulalia and new Polana families in the inner belt relied on new techniques because Yarkovsky spreading made them too disperse to be identified using the classical HCM. The technique used to discover the new Polana and Eulalia families is modified to identify asteroid families by searching for correlations between $a$ and asteroid diameter, $D$, or absolute magnitude, $H$. A group of asteroids is identified as a collisional family if its boundary in the $a$ vs. 1/$D$ or $a$ vs. $H$ planes has a characteristic V-shape which is due to the size dependent Yarkovsky spreading. The V-shape boundary is identified with two separate techniques. The first identifies a border by measuring the drop between the number of objects inside and outside of the border. The second identifies the V-shape border by measuring the number density of objects in $a$ vs. 1/$D$,$H$ space. The V-shape techniques are demonstrated on known families Erigone, Vesta, Koronis, and families difficult to identify by HCM such as Flora, Baptistina, new Polana, Eulalia and Karin. Application of the technique in a search for >2 Gyr-old families throughout the MB is discussed.

astro-ph.EP↗

arXiv2015

The daily processing of asteroid observations by Gaia

The Gaia mission started its regular observing program in the summer of 2014, and since then it is regularly obtaining observations of asteroids. This paper draws the outline of the data processing for Solar System objects, and in particular on the daily "short-term" processing, from the on-board data acquisition to the ground-based processing. We illustrate the tools developed to compute predictions of asteroid observations, we discuss the procedures implemented by the daily processing, and we illustrate some tests and validations of the processing of the asteroid observations. Our findings are overall consistent with the expectations concerning the performances of Gaia and the effectiveness of the developed software for data reduction.

astro-ph.EP↗

arXiv2015

Asteroid thermophysical modeling

The field of asteroid thermophysical modeling has experienced an extraordinary growth in the last ten years, as new thermal infrared data became available for hundreds of thousands of asteroids. The infrared emission of asteroids depends on the body's size, shape, albedo, thermal inertia, roughness and rotational properties. These parameters can therefore be derived by thermophysical modeling of infrared data. Thermophysical modeling led to asteroid size estimates that were confirmed at the few-percent level by later spacecraft visits. We discuss how instrumentation advances now allow mid-infrared interferometric observations as well as high-accuracy spectro-photometry, posing their own set of thermal-modeling challenges.We present major breakthroughs achieved in studies of the thermal inertia, a sensitive indicator for the nature of asteroids soils, allowing us, for instance, to determine the grain size of asteroidal regoliths. Thermal inertia also governs non-gravitational effects on asteroid orbits, requiring thermophysical modeling for precise asteroid dynamical studies. The radiative heating of asteroids, meteoroids, and comets from the Sun also governs the thermal stress in surface material; only recently has it been recognized as a significant weathering process. Asteroid space missions with thermal infrared instruments are currently undergoing study at all major space agencies. This will require a high level of sophistication of thermophysical models in order to analyze high-quality spacecraft data.

astro-ph.EP↗

arXiv2014

The Design Reference Asteroid for the OSIRIS-REx Mission Target (101955) Bennu

The Design Reference Asteroid (DRA) is a compilation of all that is known about the OSIRIS-REx mission target, asteroid (101955) Bennu. It contains our best knowledge of the properties of Bennu based on an extensive observational campaign that began shortly after its discovery, and has been used to inform mission plan development and flight system design. The DRA will also be compared with post-encounter science results to determine the accuracy of our Earth-based characterization efforts. The extensive observations of Bennu in 1999 has made it one of the best-characterized near-Earth asteroids. Many physical parameters are well determined, and span a number of categories: Orbital, Bulk, Rotational, Radar, Photometric, Spectroscopic, Thermal, Surface Analog, and Environment Properties. Some results described in the DRA have been published in peer-reviewed journals while others have been reviewed by OSIRIS-REx Science Team members and/or external reviewers. Some data, such as Surface Analog Properties, are based on our best knowledge of asteroid surfaces, in particular those of asteroids Eros and Itokawa. This public release of the OSIRIS-REx Design Reference Asteroid is a annotated version of the internal OSIRIS-REx document OREX-DOCS-04.00-00002, Rev 9 (accepted by the OSIRIS-REx project on 2014-April-14). The supplemental data products that accompany the official OSIRIS-REx version of the DRA are not included in this release. We are making this document available as a service to future mission planners in the hope that it will inform their efforts.

astro-ph.EP↗

arXiv2013

Physical Characterization of Warm Spitzer-observed Near-Earth Objects

Near-infrared spectroscopy of Near-Earth Objects (NEOs) connects diagnostic spectral features to specific surface mineralogies. The combination of spectroscopy with albedos and diameters derived from thermal infrared observations can increase the scientific return beyond that of the individual datasets. To that end, we have completed a spectroscopic observing campaign to complement the ExploreNEOs Warm Spitzer program that obtained albedos and diameters of nearly 600 NEOs (Trilling et al. 2010). Here we present the results of observations using the low-resolution prism mode (~0.7-2.5 microns) of the SpeX instrument on the NASA Infrared Telescope Facility (IRTF). We also include near-infrared observations of ExploreNEOs targets from the MIT-UH-IRTF Joint Campaign for Spectral Reconnaissance. Our dataset includes near-infrared spectra of 187 ExploreNEOs targets (125 observations of 92 objects from our survey and 213 observations of 154 objects from the MIT survey). We identify a taxonomic class for each spectrum and use band parameter analysis to investigate the mineralogies for the S-, Q-, and V-complex objects. Our analysis suggests that for spectra that contain near-infrared data but lack the visible wavelength region, the Bus-DeMeo system misidentifies some S-types as Q-types. We find no correlation between spectral band parameters and ExploreNEOs albedos and diameters. We find slightly negative Band Area Ratio (BAR) correlations with phase angle for Eros and Ivar, but a positive BAR correlation with phase angle for Ganymed. We find evidence for spectral phase reddening for Eros, Ganymed, and Ivar. We identify the likely ordinary chondrite type analog for a subset of our sample. Our resulting proportions of H, L, and LL ordinary chondrites differ from those calculated for meteorite falls and in previous studies of ordinary chondrite-like NEOs.

astro-ph.EP↗

arXiv2013

Evidence of a metal-rich surface for the asteroid (16) Psyche from interferometric observations in the thermal infrared

We describe the first determination of thermal properties and size of the M-type asteroid (16) Psyche from interferometric observations obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer. We used a thermophysical model to interpret our interferometric data. Our analysis shows that Psyche has a low macroscopic surface roughness. Using a convex 3-D shape model obtained by Kaasalainen et al. (2002, Icarus 159, 369-395), we derived a volume-equivalent diameter for (16) Psyche of 247 +- 25 km or 238 +- 24 km, depending on the possible values of surface roughness. Our corresponding thermal inertia estimates are 133 or 114 J.m-2.s-0.5.K-1, with a total uncertainty estimated to 40 J.m-2.s-0.5.K-1. They are among the highest thermal inertia values ever measured for an asteroid of this size. We consider this as a new evidence of a metal-rich surface for the asteroid (16) Psyche.

astro-ph.EP↗

arXiv2012

On the origin of the Almahata-Sitta meteorite and 2008TC3 asteroid

Asteroid 2008TC3 was a Near Earth Asteroid that impacted the Earth on 2008 October 7. Meteorites were produced by the break-up of 2008TC3 in the high atmosphere and at present, about 600 meteorites - called Almahata Sitta - coming from 2008TC3 have been recovered. A mineralogical study of Almahata Sitta fragments shows that the asteroid 2008TC3 was made of meteorites of different types (ureilites, H, L, and E chondrites). Understanding the origin of this body and how it was put together remain a challenge. Here we perform a detailed spectroscopical and dynamical investigation to show that the most likely source region of 2008TC3 is in the inner Main Belt at low inclination (i<8 degrees). We show that asteroids with spectroscopic classes that can be associated with the different meteorite types of Almahata Sitta are present in the region of the Main Belt that includes the Nysa-Polana family and objects of the Background at low inclination. Searching for a possible scenario of formation for 2008TC3, we show that there is little chance that 2008TC3 was formed by low velocity collisions between asteroids of different mineralogies, in the current asteroid belt. It seems more likely that the heterogeneous composition of 2008TC3 was a inherited from a time when the asteroid belt was in a different dynamical state, most likely in the very early Solar System. Because ureilites are fragments of a large, thermally metamorphosed asteroid, this suggests that the phases of collisional erosion (the break-up of the ureilite parent-body) and collisional accretion (the formation of the parent body of 2008TC3) overlapped for some time in the primordial asteroid belt.

astro-ph.EP↗

arXiv2012

Physical characterization and origin of binary near-Earth asteroid (175706) 1996 FG3

The near-Earth asteroid (NEA) (175706) 1996 FG3 is a particularly interesting spacecraft target: a binary asteroid with a low-DeltaV heliocentric orbit. The orbit of its satellite has provided valuable information about its mass density while its albedo and colors suggest it is primitive or part of the C-complex taxonomic grouping. We extend the physical characterization of this object with new observations of its emission at mid-Infrared (IR) wavelengths and with near-IR reflection spectroscopy. We derive an area-equivalent system diameter of 1.90 \pm 0.28 km (corresponding to approximate component diameters of 1.83 km and 0.51 km, respectively) and a geometric albedo of 0.039 \pm 0.012. 1996 FG3 was previously classified as a C-type asteroid, though the combined 0.4--2.5 micron spectrum with thermal correction indicates classification as B-type; both are consistent with the low measured albedo. Dynamical studies show that 1996 FG3 has most probably originated in the inner main asteroid belt. Recent work has suggested the inner Main Belt (142) Polana family as the possible origin of another low-DeltaV B-type NEA, (101955) 1999 RQ36. A similar origin for 1996 FG3 would require delivery by the overlapping Jupiter 7:2 and Mars 5:9 mean motion resonances rather than the nu-6 resonance, and we find this to be a low probability, but possible, origin.

astro-ph.EP↗

arXiv2011

Determination of physical properties of the asteroid (41) Daphne from interferometric observations in the thermal infrared

We describe interferometric observations of the asteroid (41) Daphne in the thermal infrared obtained with the Mid-Infrared Interferometric Instrument (MIDI) of the Very Large Telescope Interferometer (VLTI). We derived the size and the surface thermal properties of (41) Daphne by means of a thermophysical model (TPM), which is used for the interpretation of interferometric data for the first time. From our TPM analysis, we derived a volume equivalent diameter for (41) Daphne of 189 km, using a non-convex 3-D shape model derived from optical lightcurves and adaptive optics images (B. Carry, private communication). On the other hand, when using the convex shape of Kaasalainen et al. (2002. Icarus 159, 369-395) in our TPM analysis, the resulting volume equivalent diameter of (41) Daphne is between 194 and 209 km, depending on the surface roughness. The shape of the asteroid is used as an a priori information in our TPM analysis. No attempt is made to adjust the shape to the data. Only the size of the asteroid and its thermal parameters (albedo, thermal inertia and roughness) are adjusted to the data. We estimated our model systematic uncertainty to be of 4% and of 7% on the determination of the asteroid volume equivalent diameter depending on whether the non-convex or the convex shape is used, respectively. In terms of thermal properties, we derived a value of the surface thermal inertia smaller than 50 J m-2 s-0.5 K-1 and preferably in the range between 0 and 30 J m-2 s-0.5 K-1. Our TPM analysis also shows that Daphne has a moderate macroscopic surface roughness.

astro-ph.EP↗

arXiv2008

Thermal inertia of main belt asteroids smaller than 100 km from IRAS data

Recent works have shown that the thermal inertia of km-sized near-Earth asteroids (NEAs) is more than two orders of magnitude higher than that of main belt asteroids (MBAs) with sizes (diameters) between 200 and 1,000 km. This confirms the idea that large MBAs, over hundreds millions of years,have developed a fine and thick thermally insulating regolith layer, responsible for the low values of their thermal inertia, whereas km-sized asteroids, having collisional lifetimes of only some millions years, have less regolith, and consequently a larger surface thermal inertia. Because it is believed that regolith on asteroids forms as a result of impact processes, a better knowledge of asteroid thermal inertia values and its correlation with size, taxonomic type, and density can be used as an important constraintfor modeling of impact processes on asteroids. However, our knowledge of asteroids' thermal inertia values is still based on few data points with NEAs covering the size range 0.1-20 km and MBAs that >100 km. Here, we use IRAS infrared measurements to estimate the thermal inertias of MBAs with diameters 100 km and known shapes and spin vector: filling an important size gap between the largest MBAs and the km-sized NEAs. An update to the inverse correlation between thermal inertia and diameter is presented. For some asteroids thermophysical modelling allowed us to discriminate between the two still possible spin vector solutions derived from optical lightcurve inversion. This is important for (720) Bohlinia: our preferred solution was predicted to be the correct one by Vokrouhlicky et al. (2003, Nature 425, 147) just on theoretical grounds.

astro-ph↗

arXiv2007

Thermal inertia of near-Earth asteroids and implications for the magnitude of the Yarkovsky effect

Thermal inertia determines the temperature distribution over the surface of an asteroid and therefore governs the magnitude the Yarkovsky effect. The latter causes gradual drifting of the orbits of km-sized asteroids and plays an important role in the delivery of near-Earth asteroids (NEAs) from the main belt and in the dynamical spreading of asteroid families. At present, very little is known about the thermal inertia of asteroids in the km size range. Here we show that the average thermal inertia of a sample of NEAs in the km-size range is 200 $\pm$ 40 J m−2 s−0.5 K−1. Furthermore, we identify a trend of increasing thermal inertia with decreasing asteroid diameter, D. This indicates that the dependence of the drift rate of the orbital semimajor axis on the size of asteroids due to the Yarkovsky effect is a more complex function than the generally adopted D^(−1) dependence, and that the size distribution of objects injected by Yarkovsky-driven orbital mobility into the NEA source regions is less skewed to smaller sizes than generally assumed. We discuss how this fact may help to explain the small difference in the slope of the size distribution of km-sized NEAs and main-belt asteroids.

astro-ph↗