arXiv subjects

Marco Di Renzo

Publications and source records attributed to Marco Di Renzo.

At least 127 records · Page 7Linked to original sources

arXiv2024

Channel Estimation for Stacked Intelligent Metasurface-Assisted Wireless Networks

Emerging technologies, such as holographic multiple-input multiple-output (HMIMO) and stacked intelligent metasurface (SIM), are driving the development of wireless communication systems. Specifically, the SIM is physically constructed by stacking multiple layers of metasurfaces and has an architecture similar to an artificial neural network (ANN), which can flexibly manipulate the electromagnetic waves that propagate through it at the speed of light. This architecture enables the SIM to achieve HMIMO precoding and combining in the wave domain, thus significantly reducing the hardware cost and energy consumption. In this letter, we investigate the channel estimation problem in SIM-assisted multi-user HMIMO communication systems. Since the number of antennas at the base station (BS) is much smaller than the number of meta-atoms per layer of the SIM, it is challenging to acquire the channel state information (CSI) in SIM-assisted multi-user systems. To address this issue, we collect multiple copies of the uplink pilot signals that propagate through the SIM. Furthermore, we leverage the array geometry to identify the subspace that spans arbitrary spatial correlation matrices. Based on partial CSI about the channel statistics, a pair of subspace-based channel estimators are proposed. Additionally, we compute the mean square error (MSE) of the proposed channel estimators and optimize the phase shifts of the SIM to minimize the MSE. Numerical results are illustrated to analyze the effectiveness of the proposed channel estimation schemes.

cs.IT↗

arXiv2024

Measurement-Based Small-Scale Channel Model for Sub-6 GHz RIS-Assisted Communications

Reconfigurable intelligent surfaces (RISs) have attracted increasing interest from both academia and industry, thanks to their unique features on controlling electromagnetic (EM) waves. Although theoretical models for RIS-empowered communications have covered a variety of applications, yet, very few papers have investigated the modeling of real propagation characteristics. In this paper, we fill this gap by providing an empirical statistical channel model to describe the small-scale channel variations for an RIS-assisted broadband system at 2.6 GHz. Based on real channel measurements in outdoor, indoor and outdoor-to-indoor (O2I) environments, we compare and analyze the global, inter-cluster and intra-cluster parameters. Measurement results indicate that the deployment of an RIS with proper phase configurations can significantly improve the channel quality by enhancing the $K$-factor and reducing the time dispersion. The small-scale fading is well characterized by the proposed statistical model and the empirical channel parameters. These results are essential for the design of emerging RIS-assisted wireless systems for future applications.

cs.IT↗

arXiv2024

Beamforming Optimization for Active RIS-Aided Multiuser Communications With Hardware Impairments

In this paper, we consider an active reconfigurable intelligent surface (RIS) to assist the multiuser downlink transmission in the presence of practical hardware impairments (HWIs), including the HWIs at the transceivers and the phase noise at the active RIS. The active RIS is deployed to amplify the incident signals to alleviate the multiplicative fading effect, which is a limitation in the conventional passive RIS-aided wireless systems. We aim to maximize the sum rate through jointly designing the transmit beamforming at the base station (BS), the amplification factors and the phase shifts at the active RIS. To tackle this challenging optimization problem effectively, we decouple it into two tractable subproblems. Subsequently, each subproblem is transformed into a second order cone programming problem. The block coordinate descent framework is applied to tackle them, where the transmit beamforming and the reflection coefficients are alternately designed. In addition, another efficient algorithm is presented to reduce the computational complexity. Specifically, by exploiting the majorization-minimization approach, each subproblem is reformulated into a tractable surrogate problem, whose closed-form solutions are obtained by Lagrange dual decomposition approach and element-wise alternating sequential optimization method. Simulation results validate the effectiveness of our developed algorithms, and reveal that the HWIs significantly limit the system performance of active RIS-empowered wireless communications. Furthermore, the active RIS noticeably boosts the sum rate under the same total power budget, compared with the passive RIS.

eess.SP↗

arXiv2024

Two-Dimensional Direction-of-Arrival Estimation Using Stacked Intelligent Metasurfaces

Stacked intelligent metasurfaces (SIM) are capable of emulating reconfigurable physical neural networks by relying on electromagnetic (EM) waves as carriers. They can also perform various complex computational and signal processing tasks. A SIM is fabricated by densely integrating multiple metasurface layers, each consisting of a large number of small meta-atoms that can control the EM waves passing through it. In this paper, we harness a SIM for two-dimensional (2D) direction-of-arrival (DOA) estimation. In contrast to the conventional designs, an advanced SIM in front of the receiver array automatically carries out the 2D discrete Fourier transform (DFT) as the incident waves propagate through it. As a result, the receiver array directly observes the angular spectrum of the incoming signal. In this context, the DOA estimates can be readily obtained by using probes to detect the energy distribution on the receiver array. This avoids the need for power-thirsty radio frequency (RF) chains. To enable SIM to perform the 2D DFT, we formulate the optimization problem of minimizing the fitting error between the SIM's EM response and the 2D DFT matrix. Furthermore, a gradient descent algorithm is customized for iteratively updating the phase shift of each meta-atom in SIM. To further improve the DOA estimation accuracy, we configure the phase shift pattern in the zeroth layer of the SIM to generate a set of 2D DFT matrices associated with orthogonal spatial frequency bins. Additionally, we analytically evaluate the performance of the proposed SIM-based DOA estimator by deriving a tight upper bound for the mean square error (MSE). Our numerical simulations verify the capability of a well-trained SIM to perform DOA estimation and corroborate our theoretical analysis. It is demonstrated that a SIM having an optical computational speed achieves an MSE of $10^{-4}$ for DOA estimation.

cs.IT↗

arXiv2024

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Integrated sensing and communications (ISAC) is an emerging critical technique for the next generation of communication systems. However, due to multiple performance metrics used for communication and sensing, the limited degrees-of-freedom (DoF) in optimizing ISAC systems poses a challenge. Reconfigurable intelligent surfaces (RIS) can introduce new DoF for beamforming in ISAC systems, thereby enhancing the performance of communication and sensing simultaneously. In this paper, we propose two optimization techniques for beamforming in RIS-assisted ISAC systems. The first technique is an alternating optimization (AO) algorithm based on the semidefinite relaxation (SDR) method and a one-dimension iterative (ODI) algorithm, which can maximize the radar mutual information (MI) while imposing constraints on the communication rates. The second technique is an AO algorithm based on the Riemannian gradient (RG) method, which can maximize the weighted ISAC performance metrics. Simulation results verify the effectiveness of the proposed schemes. The AO-SDR-ODI method is shown to achieve better communication and sensing performance, than the AO-RG method, at a higher complexity. It is also shown that the mean-squared-error (MSE) of the estimates of the sensing parameters decreases as the radar MI increases.

eess.SP↗

arXiv2023

Electromagnetic Signal and Information Theory -- Electromagnetically Consistent Communication Models for the Transmission and Processing of Information

In this paper, we present electromagnetic signal and information theory (ESIT). ESIT is an interdisciplinary scientific discipline, which amalgamates electromagnetic theory, signal processing theory, and information theory. ESIT is aimed at studying and designing physically consistent communication schemes for the transmission and processing of information in communication networks. In simple terms, ESIT can be defined as physics-aware information theory and signal processing for communications. We consider three relevant problems in contemporary communication theory, and we show how they can be tackled under the lenses of ESIT. Specifically, we focus on (i) the theoretical and practical motivations behind antenna designs based on subwavelength radiating elements and interdistances; (ii) the modeling and role played by the electromagnetic mutual coupling, and the appropriateness of multiport network theory for modeling it; and (iii) the analytical tools for unveiling the performance limits and realizing spatial multiplexing in near field, line-of-sight, channels. To exemplify the role played by ESIT and the need for electromagnetic consistency, we consider case studies related to reconfigurable intelligent surfaces and holographic surfaces, and we highlight the inconsistencies of widely utilized communication models, as opposed to communication models that originate from first electromagnetic principles.

cs.IT↗

arXiv2023

Empirical Validation of the Impedance-Based RIS Channel Model in an Indoor Scattering Environment

Ensuring the precision of channel modeling plays a pivotal role in the development of wireless communication systems, and this requirement remains a persistent challenge within the realm of networks supported by Reconfigurable Intelligent Surfaces (RIS). Achieving a comprehensive and reliable understanding of channel behavior in RIS-aided networks is an ongoing and complex issue that demands further exploration. In this paper, we empirically validate a recently-proposed impedance-based RIS channel model that accounts for the mutual coupling at the antenna array and precisely models the presence of scattering objects within the environment as a discrete array of loaded dipoles. To this end, we exploit real-life channel measurements collected in an office environment to demonstrate the validity of such a model and its applicability in a practical scenario. Finally, we provide numerical results demonstrating that designing the RIS configuration based upon such model leads to superior performance as compared to reference schemes.

cs.IT↗

arXiv2023

Two-Timescale Transmission Design and RIS Optimization for Integrated Localization and Communications

Reconfigurable intelligent surfaces (RISs) have tremendous potential to boost communication performance, especially when the line-of-sight (LOS) path between the user equipment (UE) and base station (BS) is blocked. To control the RIS, channel state information (CSI) is needed, which entails significant pilot overhead. To reduce this overhead and the need for frequent RIS reconfiguration, we propose a novel framework for integrated localization and communications, where RIS configurations are fixed during location coherence intervals, while BS precoders are optimized every channel coherence interval. This framework leverages accurate location information obtained with the aid of several RISs as well as novel RIS optimization and channel estimation methods. Performance in terms of localization accuracy, channel estimation error, and achievable rate demonstrates the effectiveness of the proposed approach.

eess.SP↗

arXiv2023

Stacked Intelligent Metasurface-Aided MIMO Transceiver Design

Next-generation wireless networks are expected to utilize the limited radio frequency (RF) resources more efficiently with the aid of intelligent transceivers. To this end, we propose a promising transceiver architecture relying on stacked intelligent metasurfaces (SIM). An SIM is constructed by stacking an array of programmable metasurface layers, where each layer consists of a massive number of low-cost passive meta-atoms that individually manipulate the electromagnetic (EM) waves. By appropriately configuring the passive meta-atoms, an SIM is capable of accomplishing advanced computation and signal processing tasks, such as multiple-input multiple-output (MIMO) precoding/combining, multi-user interference mitigation, and radar sensing, as the EM wave propagates through the multiple layers of the metasurface, which effectively reduces both the RF-related energy consumption and processing delay. Inspired by this, we provide an overview of the SIM-aided MIMO transceiver design, which encompasses its hardware architecture and its potential benefits over state-of-the-art solutions. Furthermore, we discuss promising application scenarios and identify the open research challenges associated with the design of advanced SIM architectures for next-generation wireless networks. Finally, numerical results are provided for quantifying the benefits of wave-based signal processing in wireless systems.

cs.IT↗

arXiv2023

Near-Field Sparse Channel Estimation for Extremely Large-Scale RIS-Aided Wireless Communications

A significant increase in the number of reconfigurable intelligent surface (RIS) elements results in a spherical wavefront in the near field of extremely large-scale RIS (XL-RIS). Although the channel matrix of the cascaded two-hop link may become sparse in the polar-domain representation, their accurate estimation of these polar-domain parameters cannot be readily guaranteed. To tackle this challenge, we exploit the sparsity inherent in the cascaded channel. To elaborate, we first estimate the significant path-angles and distances corresponding to the common paths between the BS and the XL-RIS. Then, the individual path parameters associated with different users are recovered. This results in a two-stage channel estimation scheme, in which distinct learning-based networks are used for channel training at each stage. More explicitly, in stage I, a denoising convolutional neural network (DnCNN) is employed for treating the grid mismatches as noise to determine the true grid index of the angles and distances. By contrast, an iterative shrinkage thresholding algorithm (ISTA) based network is proposed for adaptively adjusting the column coherence of the dictionary matrix in stage II. Finally, our simulation results demonstrate that the proposed two-stage learning-based channel estimation outperforms the state-of-the-art benchmarks.

eess.SP↗

arXiv2023

Unlocking Metasurface Practicality for B5G Networks: AI-assisted RIS Planning

The advent of reconfigurable intelligent surfaces(RISs) brings along significant improvements for wireless technology on the verge of beyond-fifth-generation networks (B5G).The proven flexibility in influencing the propagation environment opens up the possibility of programmatically altering the wireless channel to the advantage of network designers, enabling the exploitation of higher-frequency bands for superior throughput overcoming the challenging electromagnetic (EM) propagation properties at these frequency bands. However, RISs are not magic bullets. Their employment comes with significant complexity, requiring ad-hoc deployments and management operations to come to fruition. In this paper, we tackle the open problem of bringing RISs to the field, focusing on areas with little or no coverage. In fact, we present a first-of-its-kind deep reinforcement learning (DRL) solution, dubbed as D-RISA, which trains a DRL agent and, in turn, obtain san optimal RIS deployment. We validate our framework in the indoor scenario of the Rennes railway station in France, assessing the performance of our algorithm against state-of-the-art (SOA) approaches. Our benchmarks showcase better coverage, i.e., 10-dB increase in minimum signal-to-noise ratio (SNR), at lower computational time (up to -25 percent) while improving scalability towards denser network deployments.

cs.NI↗

arXiv2023

Stacked Intelligent Metasurface Performs a 2D DFT in the Wave Domain for DOA Estimation

Staked intelligent metasurface (SIM) based techniques are developed to perform two-dimensional (2D) direction-of-arrival (DOA) estimation. In contrast to the conventional designs, an advanced SIM in front of the receiving array automatically performs the 2D discrete Fourier transform (DFT) as the incident waves propagate through it. To arrange for the SIM to carry out this task, we design a gradient descent algorithm for iteratively updating the phase shift of each meta-atom in the SIM to minimize the fitting error between the SIM's response and the 2D DFT matrix. To further improve the DOA estimation accuracy, we configure the phase shifts in the input layer of SIM to generate a set of 2D DFT matrices having orthogonal spatial frequency bins. Extensive numerical simulations verify the capability of a well-trained SIM to perform 2D DFT. Specifically, it is demonstrated that the SIM having an optical computational speed achieves an MSE of $10^{-4}$ in 2D DOA estimation.

cs.IT↗

arXiv2023

Integrated Sensing and Communications for IoT: Synergies with Key 6G Technology Enablers

The Internet of Things (IoT) and wireless generations have been evolving simultaneously for the past few decades. Built upon wireless communication and sensing technologies, IoT networks are usually evaluated based on metrics that measure the device ability to sense information and effectively share it with the network, which makes Integrated Sensing and Communication (ISAC) a pivotal candidate for the sixth-generation (6G) IoT standards. This paper reveals several innovative aspects of ISAC from an IoT perspective in 6G, empowering various modern IoT use cases and key technology enablers. Moreover, we address the challenges and future potential of ISAC-enabled IoT, including synergies with Reconfigurable Intelligent Surfaces (RIS), Artificial Intelligence (AI), and key updates of ISAC-IoT in 6G standardization. Furthermore, several evolutionary concepts are introduced to open future research in 6G ISAC-IoT, including the interplay with Non-Terrestrial Networks (NTN) and Orthogonal Time-Frequency Space (OTFS) modulation.

cs.IT↗

arXiv2023

Distributed CSMA/CA MAC Protocol for RIS-Assisted Networks

This paper focuses on achieving optimal multi-user channel access in distributed networks using a reconfigurable intelligent surface (RIS). The network includes wireless channels with direct links between users and RIS links connecting users to the RIS. To maximize average system throughput, an optimal channel access strategy is proposed, considering the trade-off between exploiting spatial diversity gain with RIS assistance and the overhead of channel probing. The paper proposes an optimal distributed Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) strategy with opportunistic RIS assistance, based on statistics theory of optimal sequential observation planned decision. Each source-destination pair makes decisions regarding the use of direct links and/or probing source-RIS-destination links. Channel access occurs in a distributed manner after successful channel contention. The optimality of the strategy is rigorously derived using multiple-level pure thresholds. A distributed algorithm, which achieves significantly lower online complexity at $O(1)$, is developed to implement the proposed strategy. Numerical simulations verify the theoretical results and demonstrate the superior performance compared to existing approaches.

cs.IT↗

arXiv2023

Toward Beamfocusing-Aided Near-Field Communications: Research Advances, Potential, and Challenges

Next-generation mobile networks promise to support high throughput, massive connectivity, and improved energy efficiency. To achieve these ambitious goals, extremely large-scale antenna arrays (ELAAs) and terahertz communications constitute a pair of promising technologies. This will result in future wireless communications occurring in the near-field regions. To accurately portray the channel characteristics of near-field wireless propagation, spherical wavefront-based models are required and present both opportunities as well as challenges. Following the basics of near-field communications (NFC), we contrast it to conventional far-field communications. Moreover, we cover the key challenges of NFC, including its channel modeling and estimation, near-field beamfocusing, as well as hardware design. Our numerical results demonstrate the potential of NFC in improving the spatial multiplexing gain and positioning accuracy. Finally, a suite of open issues are identified for motivating future research.

cs.IT↗

arXiv2023

Tuning of Ray-Based Channel Model for 5G Indoor Industrial Scenarios

This paper presents an innovative method that can be used to produce deterministic channel models for 5G industrial internet-of-things (IIoT) scenarios. Ray-tracing (RT) channel emulation can capture many of the specific properties of a propagation scenario, which is incredibly beneficial when facing various industrial environments and deployment setups. But the environment's complexity, composed of many metallic objects of different sizes and shapes, pushes the RT tool to its limits. In particular, the scattering or diffusion phenomena can bring significant components. Thus, in this article, the Volcano RT channel simulation is tuned and benchmarked against field measurements found in the literature at two frequencies relevant to 5G industrial networks: 3.7 GHz (mid-band) and 28 GHz (millimeter-wave (mmWave) band), to produce calibrated ray-based channel model. Both specular and diffuse scattering contributions are calculated. Finally, the tuned RT data is compared to measured large-scale parameters, such as the power delay profile (PDP), the cumulative distribution function (CDF) of delay spreads (DSs), both in line-of-sight (LoS) and non-LoS (NLoS) situations and relevant IIoT channel properties are further explored.

eess.SP↗

arXiv2023

RIS-Assisted Wireless Communications: Long-Term versus Short-Term Phase Shift Designs

Reconfigurable intelligent surface (RIS) has recently gained significant interest as an emerging technology for future wireless networks thanks to its potential for improving the coverage probability in challenging propagation environments. This paper studies an RIS-assisted propagation environment, where a source transmits data to a destination in the presence of a weak direct link. We analyze and compare RIS designs based on long-term and short-term channel statistics in terms of coverage probability and ergodic rate. For the considered optimization designs, we derive closed-form expressions for the coverage probability and ergodic rate, which explicitly unveil the impact of both the propagation environment and the RIS on the system performance. Besides the optimization of the RIS phase profile, we formulate an RIS placement optimization problem with the aim of maximizing the coverage probability by relying only on partial channel state information. An efficient algorithm is proposed based on the gradient ascent method. Simulation results are illustrated in order to corroborate the analytical framework and findings. The proposed RIS phase profile is shown to outperform several heuristic benchmarks in terms of outage probability and ergodic rate. In addition, the proposed RIS placement strategy provides an extra degree of freedom that remarkably improves system performance.

cs.IT↗

arXiv2023

Analysis and Optimization of Reconfigurable Intelligent Surfaces Based on $S$-Parameters Multiport Network Theory

In this paper, we consider a reconfigurable intelligent surface (RIS) and model it by using multiport network theory. We first compare the representation of RIS by using $Z$-parameters and $S$-parameters, by proving their equivalence and discussing their distinct features. Then, we develop an algorithm for optimizing the RIS configuration in the presence of electromagnetic mutual coupling. We show that the proposed algorithm based on optimizing the $S$-parameters results in better performance than existing algorithms based on optimizing the $Z$-parameters. This is attributed to the fact that small perturbations of the step size of the proposed algorithm result in larger variations of the $S$-parameters, hence increasing the convergence speed of the algorithm.

cs.IT↗