Searcharxiv⌕ Search

arXiv subjects

Marco F. Duarte

Publications and source records attributed to Marco F. Duarte.

28 records · Page 2Linked to original sources

Performance Bounds for Grouped Incoherent Measurements in Compressive Sensing

Compressive sensing (CS) allows for acquisition of sparse signals at sampling rates significantly lower than the Nyquist rate required for bandlimited signals. Recovery guarantees for CS are generally derived based on the assumption that measurement projections are selected independently at random. However, for many practical signal acquisition applications, including medical imaging and remote sensing, this assumption is violated as the projections must be taken in groups. In this paper, we consider such applications and derive requirements on the number of measurements needed for successful recovery of signals when groups of dependent projections are taken at random. We find a penalty factor on the number of required measurements with respect to the standard CS scheme that employs conventional independent measurement selection and evaluate the accuracy of the predicted penalty through simulations.

cs.IT↗

Compressive Time Delay Estimation Using Interpolation

Time delay estimation has long been an active area of research. In this work, we show that compressive sensing with interpolation may be used to achieve good estimation precision while lowering the sampling frequency. We propose an Interpolating Band-Excluded Orthogonal Matching Pursuit algorithm that uses one of two interpolation functions to estimate the time delay parameter. The numerical results show that interpolation improves estimation precision and that compressive sensing provides an elegant tradeoff that may lower the required sampling frequency while still attaining a desired estimation performance.

cs.IT↗

Spectral Compressive Sensing with Polar Interpolation

Existing approaches to compressive sensing of frequency-sparse signals focuses on signal recovery rather than spectral estimation. Furthermore, the recovery performance is limited by the coherence of the required sparsity dictionaries and by the discretization of the frequency parameter space. In this paper, we introduce a greedy recovery algorithm that leverages a band-exclusion function and a polar interpolation function to address these two issues in spectral compressive sensing. Our algorithm is geared towards line spectral estimation from compressive measurements and outperforms most existing approaches in fidelity and tolerance to noise.

cs.IT↗

Measurement Bounds for Sparse Signal Ensembles via Graphical Models

In compressive sensing, a small collection of linear projections of a sparse signal contains enough information to permit signal recovery. Distributed compressive sensing (DCS) extends this framework by defining ensemble sparsity models, allowing a correlated ensemble of sparse signals to be jointly recovered from a collection of separately acquired compressive measurements. In this paper, we introduce a framework for modeling sparse signal ensembles that quantifies the intra- and inter-signal dependencies within and among the signals. This framework is based on a novel bipartite graph representation that links the sparse signal coefficients with the measurements obtained for each signal. Using our framework, we provide fundamental bounds on the number of noiseless measurements that each sensor must collect to ensure that the signals are jointly recoverable.

cs.IT↗

Structured Compressed Sensing: From Theory to Applications

Compressed sensing (CS) is an emerging field that has attracted considerable research interest over the past few years. Previous review articles in CS limit their scope to standard discrete-to-discrete measurement architectures using matrices of randomized nature and signal models based on standard sparsity. In recent years, CS has worked its way into several new application areas. This, in turn, necessitates a fresh look on many of the basics of CS. The random matrix measurement operator must be replaced by more structured sensing architectures that correspond to the characteristics of feasible acquisition hardware. The standard sparsity prior has to be extended to include a much richer class of signals and to encode broader data models, including continuous-time signals. In our overview, the theme is exploiting signal and measurement structure in compressive sensing. The prime focus is bridging theory and practice; that is, to pinpoint the potential of structured CS strategies to emerge from the math to the hardware. Our summary highlights new directions as well as relations to more traditional CS, with the hope of serving both as a review to practitioners wanting to join this emerging field, and as a reference for researchers that attempts to put some of the existing ideas in perspective of practical applications.

cs.IT↗

Asynchronous Code-Division Random Access Using Convex Optimization

Many applications in cellular systems and sensor networks involve a random subset of a large number of users asynchronously reporting activity to a base station. This paper examines the problem of multiuser detection (MUD) in random access channels for such applications. Traditional orthogonal signaling ignores the random nature of user activity in this problem and limits the total number of users to be on the order of the number of signal space dimensions. Contention-based schemes, on the other hand, suffer from delays caused by colliding transmissions and the hidden node problem. In contrast, this paper presents a novel pairing of an asynchronous non-orthogonal code-division random access scheme with a convex optimization-based MUD algorithm that overcomes the issues associated with orthogonal signaling and contention-based methods. Two key distinguishing features of the proposed MUD algorithm are that it does not require knowledge of the delay or channel state information of every user and it has polynomial-time computational complexity. The main analytical contribution of this paper is the relationship between the performance of the proposed MUD algorithm in the presence of arbitrary or random delays and two simple metrics of the set of user codewords. The study of these metrics is then focused on two specific sets of codewords, random binary codewords and specially constructed algebraic codewords, for asynchronous random access. The ensuing analysis confirms that the proposed scheme together with either of these two codeword sets significantly outperforms the orthogonal signaling-based random access in terms of the total number of users in the system.

cs.IT↗

A Theoretical Analysis of Joint Manifolds

The emergence of low-cost sensor architectures for diverse modalities has made it possible to deploy sensor arrays that capture a single event from a large number of vantage points and using multiple modalities. In many scenarios, these sensors acquire very high-dimensional data such as audio signals, images, and video. To cope with such high-dimensional data, we typically rely on low-dimensional models. Manifold models provide a particularly powerful model that captures the structure of high-dimensional data when it is governed by a low-dimensional set of parameters. However, these models do not typically take into account dependencies among multiple sensors. We thus propose a new joint manifold framework for data ensembles that exploits such dependencies. We show that simple algorithms can exploit the joint manifold structure to improve their performance on standard signal processing applications. Additionally, recent results concerning dimensionality reduction for manifolds enable us to formulate a network-scalable data compression scheme that uses random projections of the sensed data. This scheme efficiently fuses the data from all sensors through the addition of such projections, regardless of the data modalities and dimensions.

cs.LG↗

Model-Based Compressive Sensing

Compressive sensing (CS) is an alternative to Shannon/Nyquist sampling for the acquisition of sparse or compressible signals that can be well approximated by just K << N elements from an N-dimensional basis. Instead of taking periodic samples, CS measures inner products with M < N random vectors and then recovers the signal via a sparsity-seeking optimization or greedy algorithm. Standard CS dictates that robust signal recovery is possible from M = O(K log(N/K)) measurements. It is possible to substantially decrease M without sacrificing robustness by leveraging more realistic signal models that go beyond simple sparsity and compressibility by including structural dependencies between the values and locations of the signal coefficients. This paper introduces a model-based CS theory that parallels the conventional theory and provides concrete guidelines on how to create model-based recovery algorithms with provable performance guarantees. A highlight is the introduction of a new class of structured compressible signals along with a new sufficient condition for robust structured compressible signal recovery that we dub the restricted amplification property, which is the natural counterpart to the restricted isometry property of conventional CS. Two examples integrate two relevant signal models - wavelet trees and block sparsity - into two state-of-the-art CS recovery algorithms and prove that they offer robust recovery from just M=O(K) measurements. Extensive numerical simulations demonstrate the validity and applicability of our new theory and algorithms.

cs.IT↗

Beyond Nyquist: Efficient Sampling of Sparse Bandlimited Signals

Wideband analog signals push contemporary analog-to-digital conversion systems to their performance limits. In many applications, however, sampling at the Nyquist rate is inefficient because the signals of interest contain only a small number of significant frequencies relative to the bandlimit, although the locations of the frequencies may not be known a priori. For this type of sparse signal, other sampling strategies are possible. This paper describes a new type of data acquisition system, called a random demodulator, that is constructed from robust, readily available components. Let K denote the total number of frequencies in the signal, and let W denote its bandlimit in Hz. Simulations suggest that the random demodulator requires just O(K log(W/K)) samples per second to stably reconstruct the signal. This sampling rate is exponentially lower than the Nyquist rate of W Hz. In contrast with Nyquist sampling, one must use nonlinear methods, such as convex programming, to recover the signal from the samples taken by the random demodulator. This paper provides a detailed theoretical analysis of the system's performance that supports the empirical observations.

cs.IT↗

Distributed Compressive Sensing

Compressive sensing is a signal acquisition framework based on the revelation that a small collection of linear projections of a sparse signal contains enough information for stable recovery. In this paper we introduce a new theory for distributed compressive sensing (DCS) that enables new distributed coding algorithms for multi-signal ensembles that exploit both intra- and inter-signal correlation structures. The DCS theory rests on a new concept that we term the joint sparsity of a signal ensemble. Our theoretical contribution is to characterize the fundamental performance limits of DCS recovery for jointly sparse signal ensembles in the noiseless measurement setting; our result connects single-signal, joint, and distributed (multi-encoder) compressive sensing. To demonstrate the efficacy of our framework and to show that additional challenges such as computational tractability can be addressed, we study in detail three example models for jointly sparse signals. For these models, we develop practical algorithms for joint recovery of multiple signals from incoherent projections. In two of our three models, the results are asymptotically best-possible, meaning that both the upper and lower bounds match the performance of our practical algorithms. Moreover, simulations indicate that the asymptotics take effect with just a moderate number of signals. DCS is immediately applicable to a range of problems in sensor arrays and networks.

cs.IT↗