arXiv subjects

Marco Frailis

Publications and source records attributed to Marco Frailis.

9 recordsLinked to original sources

arXiv2020

Revised planet brightness temperatures using the Planck/LFI 2018 data release

We present new estimates of the brightness temperatures of Jupiter, Saturn, Uranus, and Neptune based on the measurements carried in 2009--2013 by PLANCK/LFI at 30, 44, and 70 GHz and released to the public in 2018. This work extends the results presented in the 2013 and 2015 PLANCK/LFI Calibration Papers, based on the data acquired in 2009--2011. PLANCK observed each planet up to eight times during the nominal mission. We processed time-ordered data from the 22 LFI radiometers to derive planet antenna temperatures for each planet and transit. We accounted for the beam shape, radiometer bandpasses, and several systematic effects. We compared our results with the results from the ninth year of WMAP, PLANCK/HFI observations, and existing data and models for planetary microwave emissivity. For Jupiter, we obtain Tb = 144.9, 159.8, 170.5 K (+/- 0.2 K at 1 sigma, with temperatures expressed using the Rayleigh-Jeans scale) at 30, 44 and 70 GHz, respectively, or equivalently a band averaged Planck temperature TbBA=144.7$, 160.3, 171.2 K in good agreement with WMAP and existing models. A slight excess at 30 GHz with respect to models is interpreted as an effect of synchrotron emission. Our measures for Saturn agree with the results from WMAP for rings Tb = 9.2 +/- 1.4, 12.6 +/- 2.3, 16.2 +/- 0.8 K, while for the disc we obtain Tb = 140.0 +/- 1.4, 147.2 +/- 1.2, 150.2 +/- 0.4 K, or equivalently a TbBA=139.7, 147.8, 151.0 K. Our measures for Uranus (Tb = 152 +/- 6, 145 +/- 3, 132.0 +/- 2 K, or TbBA=152, 145, 133 K and Neptune Tb = 154 +/- 11, 148 +/- 9, 128 +/- 3 K, or TbBA=154 , 149, 128 K) agree closely with WMAP and previous data in literature.

astro-ph.EP↗

arXiv2017

The Euclid Data Processing Challenges

Euclid is a Europe-led cosmology space mission dedicated to a visible and near infrared survey of the entire extra-galactic sky. Its purpose is to deepen our knowledge of the dark content of our Universe. After an overview of the Euclid mission and science, this contribution describes how the community is getting organized to face the data analysis challenges, both in software development and in operational data processing matters. It ends with a more specific account of some of the main contributions of the Swiss Science Data Center (SDC-CH).

astro-ph.IM↗

arXiv2014

DAS: a data management system for instrument tests and operations

The Data Access System (DAS) is a metadata and data management software system, providing a reusable solution for the storage of data acquired both from telescopes and auxiliary data sources during the instrument development phases and operations. It is part of the Customizable Instrument WorkStation system (CIWS-FW), a framework for the storage, processing and quick-look at the data acquired from scientific instruments. The DAS provides a data access layer mainly targeted to software applications: quick-look displays, pre-processing pipelines and scientific workflows. It is logically organized in three main components: an intuitive and compact Data Definition Language (DAS DDL) in XML format, aimed for user-defined data types; an Application Programming Interface (DAS API), automatically adding classes and methods supporting the DDL data types, and providing an object-oriented query language; a data management component, which maps the metadata of the DDL data types in a relational Data Base Management System (DBMS), and stores the data in a shared (network) file system. With the DAS DDL, developers define the data model for a particular project, specifying for each data type the metadata attributes, the data format and layout (if applicable), and named references to related or aggregated data types. Together with the DDL user-defined data types, the DAS API acts as the only interface to store, query and retrieve the metadata and data in the DAS system, providing both an abstract interface and a data model specific one in C, C++ and Python. The mapping of metadata in the back-end database is automatic and supports several relational DBMSs, including MySQL, Oracle and PostgreSQL.

astro-ph.IM↗

arXiv2014

CIWS-FW: a Customizable InstrumentWorkstation Software Framework for instrument-independent data handling

The CIWS-FW is aimed at providing a common and standard solution for the storage, processing and quick look at the data acquired from scientific instruments for astrophysics. The target system is the instrument workstation either in the context of the Electrical Ground Support Equipment for space-borne experiments, or in the context of the data acquisition system for instrumentation. The CIWS-FW core includes software developed by team members for previous experiments and provides new components and tools that improve the software reusability, configurability and extensibility attributes. The CIWS-FW mainly consists of two packages: the data processing system and the data access system. The former provides the software components and libraries to support the data acquisition, transformation, display and storage in near real time of either a data packet stream and/or a sequence of data files generated by the instrument. The latter is a meta-data and data management system, providing a reusable solution for the archiving and retrieval of the acquired data. A built-in operator GUI allows to control and configure the IW. In addition, the framework provides mechanisms for system error and logging handling. A web portal provides the access to the CIWS-FW documentation, software repository and bug tracking tools for CIWS-FW developers. We will describe the CIWS-FW architecture and summarize the project status.

astro-ph.IM↗

arXiv2013

In-flight calibration and verification of the Planck-LFI instrument

In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance assessment and the thermal susceptibility tests. The logic, sequence, goals and results of the in-flight tests are discussed. All the calibration activities were successfully carried out and the instrument response was comparable to the one observed on ground. For some channels the in-flight tuning activity allowed us to improve significantly the noise performance.

astro-ph.IM↗

arXiv2010

Planck-LFI: Design and Performance of the 4 Kelvin Reference Load Unit

The LFI radiometers use a pseudo-correlation design where the signal from the sky is continuously compared with a stable reference signal, provided by a cryogenic reference load system. The reference unit is composed by small pyramidal horns, one for each radiometer, 22 in total, facing small absorbing targets, made of a commercial resin ECCOSORB CR (TM), cooled to approximately 4.5 K. Horns and targets are separated by a small gap to allow thermal decoupling. Target and horn design is optimized for each of the LFI bands, centered at 70, 44 and 30 GHz. Pyramidal horns are either machined inside the radiometer 20K module or connected via external electro-formed bended waveguides. The requirement of high stability of the reference signal imposed a careful design for the radiometric and thermal properties of the loads. Materials used for the manufacturing have been characterized for thermal, RF and mechanical properties. We describe in this paper the design and the performance of the reference system.

astro-ph.IM↗

arXiv2010

Planck-LFI radiometers tuning

"This paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst" This paper describes the Planck Low Frequency Instrument tuning activities performed through the ground test campaigns, from Unit to Satellite Levels. Tuning is key to achieve the best possible instrument performance and tuning parameters strongly depend on thermal and electrical conditions. For this reason tuning has been repeated several times during ground tests and it has been repeated in flight before starting nominal operations. The paper discusses the tuning philosophy, the activities and the obtained results, highlighting developments and changes occurred during test campaigns. The paper concludes with an overview of tuning performed during the satellite cryogenic test campaign (Summer 2008) and of the plans for the just started in-flight calibration.

astro-ph.IM↗

arXiv2006

A third level trigger programmable on FPGA for the gamma/hadron separation in a Cherenkov telescope using pseudo-Zernike moments and the SVM classifier

We studied the application of the Pseudo-Zernike features as image parameters (instead of the Hillas parameters) for the discrimination between the images produced by atmospheric electromagnetic showers caused by gamma-rays and the ones produced by atmospheric electromagnetic showers caused by hadrons in the MAGIC Experiment. We used a Support Vector Machine as classification algorithm with the computed Pseudo-Zernike features as classification parameters. We implemented on a FPGA board a kernel function of the SVM and the Pseudo-Zernike features to build a third level trigger for the gamma-hadron separation task of the MAGIC Experiment.

cs.CV↗

arXiv2003

The FRED Event Display: an Extensible HepRep Client for GLAST

A new graphics client prototype for the HepRep protocol is presented. Based on modern toolkits and high level languages (C++ and Ruby), Fred is an experiment to test applicability of scripting facilities to the high energy physics event display domain. Its flexible structure, extensibility and the use of the HepRep protocol are key features for its use in the astroparticle experiment GLAST.

cs.GR↗