arXiv subjects

Marco Gandolfi

Publications and source records attributed to Marco Gandolfi.

11 recordsLinked to original sources

arXiv2024

Anomalous frequency scaling of acoustic phonon damping in nickel cavities fabricated by ps-laser delamination

Single-shot picosecond (ps) laser induced delamination allows for the direct generation of suspended membranes from a continuous metallic film, offering a promising platform for control of ultrafast magnetization dynamics driven by acoustic waves. Using the picosecond-ultrasonics method, we demonstrate that long-lived low-frequency acoustic waves can be optically-excited in the delaminated cavities. At the same time, higher-frequency modes >60GHz exhibit a surprisingly fast damping, following a scaling law incompatible with the expected attenuation mediated by phonon-phonon scattering. Comparing measurements between delaminated cavities and a benchmark nickel film in contact with the substrate, we link our findings with structural modifications of the nickel crystal induced by the delamination process.

cond-mat.mtrl-sci↗

arXiv2024

Ultrafast nano generation of acoustic waves in water via a single carbon nanotube

Generation of ultra high frequency acoustic waves in water is key to nano resolution sensing, acoustic imaging and theranostics. In this context water immersed carbon nanotubes (CNTs) may act as an ideal optoacoustic source, due to their nanometric radial dimensions, peculiar thermal properties and broad band optical absorption. The generation mechanism of acoustic waves in water, upon excitation of both a single-wall (SW) and a multi-wall (MW) CNT with laser pulses of temporal width ranging from 5 ns down to ps, is theoretically investigated via a multi-scale approach. We show that, depending on the combination of CNT size and laser pulse duration, the CNT can act as a thermophone or a mechanophone. As a thermophone, the CNT acts as a nanoheater for the surrounding water, which, upon thermal expansion, launches the pressure wave. As a mechanophone, the CNT acts as a nanopiston, its thermal expansion directly triggering the pressure wave in water. Activation of the mechanophone effect is sought to trigger few nanometers wavelength sound waves in water, matching the CNT acoustic frequencies. This is at variance with respect to the commonly addressed case of water-immersed single metallic nano-objects excited with ns laser pulses, where only the thermophone effect significantly contributes. The present findings might be of impact in fields ranging from nanoscale non-destructive testing to water dynamics at the meso- to nano-scale.

cond-mat.mes-hall↗

arXiv2024

Tuning photoacoustics with nanotransducers via Thermal Boundary Resistance and Laser Pulse Duration

The photoacoustic effect in liquids, generated by metal nanoparticles excited with short laser pulses, offers high contrast imaging and promising medical treatment techniques. Understanding the role of the thermal boundary resistance (TBR) and the laser pulse duration in the generation mechanism of acoustic waves is essential to implement efficient photoacoustic nanotransducers. This work theoretically investigates, for the paradigmatic case of water-immersed gold nanocylinders, the role of the TBR and of laser pulse duration in the competition between the launching mechanisms: the thermophone and the mechanophone. In the thermophone, the nanoparticle acts as a nanoheater and the wave is launched by water thermal expansion. In the mechanophone, the nanoparticle directly acts as a nanopiston. Specifically, for a gold-water interface, the thermophone prevails under ns light pulse irradiation, while the mechanophone dominates shortening the pulse to the 10 ps regime. For a graphene-functionalized gold-water interface, instead, the mechanophone dominates over the entire range of explored laser pulse durations. Results point to high-TBR, liquid-immersed nanoparticles as potentially efficient photoacoustic nanogenerators, with the advantage of keeping the liquid environment temperature unaltered.

cond-mat.mes-hall↗

arXiv2022

Near-unity third-harmonic circular dichroism driven by quasi-BIC in asymmetric silicon metasurfaces

We use numerical simulations to demonstrate third-harmonic generation with near-unity nonlinear circular dichroism (CD) and high conversion efficiency ($ 10^{-2}\ \text{W}^{-2}$) in asymmetric Si-on-SiO$_2$ metasurfaces. The working principle relies on the selective excitation of a quasi-bound state in the continuum, characterized by a very high ($>10^5$) quality-factor. By tuning multi-mode interference with the variation of the metasurface geometrical parameters, we show the possibility of independent control of linear CD and nonlinear CD. Our results pave the way for the development of all-dielectric metasurfaces for nonlinear chiro-optical devices with high conversion efficiency.

physics.optics↗

arXiv2021

Non-thermal light-assisted resistance collapse in a V$_2$O$_3$-based Mott-insulator device

The insulator-to-metal transition in Mott insulators is the key mechanism for a novel class of electronic devices, belonging to the Mottronics family. Intense research efforts are currently devoted to the development of specific control protocols, usually based on the application of voltage, strain, pressure and light excitation. The ultimate goal is to achieve the complete control of the electronic phase transformation, with dramatic impact on the performance, for example, of resistive switching devices. Here, we investigate the simultaneous effect of external voltage and excitation by ultrashort light pulses on a single Mottronic device based on a V$_2$O$_3$ epitaxial thin film. The experimental results, supported by finite-element simulations of the thermal problem, demonstrate that the combination of light excitation and external electrical bias drives a volatile resistivity drop which goes beyond the combined effect of laser and Joule heating. Our results impact on the development of protocols for the non-thermal control of the resistive switching transition in correlated materials.

cond-mat.str-el↗

arXiv2021

Time-resolved thermal lens spectroscopy of glassy dynamics in supercooled liquids: theory and experiments

Specific heat and linear thermal expansivity are fundamental thermal dynamics and have been proven as interesting relaxing quantities to investigate in glass transition and glassy state. However, their possibility has much less been exploited compared to mechanical and dielectric susceptibilities due to the limited spectroscopy bandwidth. This work reports on simultaneous spectroscopy of the two by making use of ultrafast time-resolved thermal lens (TL) spectroscopy. Detailed modeling of the thermoelastic transients of a relaxing system subjected to ultrashort laser heating is presented to describe the TL response. The model has been applied to analyze a set of experimentally recorded TL waveforms, allowing the determination of relaxation strength and relaxation frequency from sub-kilohertz to sub-100 MHz and in a wide temperature range from 200-280 K.

cond-mat.soft↗

arXiv2021

Impulsive stimulated scatttering signal in supercooled liquids with Debye or Havriliak-Negami relaxation of the specific heat capacity and thermal expansion coefficient

A generalized physical model is introduced to describe the impulsive stimulated scattering (ISS) response of relaxing systems to photothermal excitation in a periodical grating geometry. The proposed approach starts from Debye and Havriliak-Negami expressions for both the frequency-dependent heat capacity, C(ω), and thermal expansion coefficient, γ(ω). Simulations are carried out on glycerol to test and compare the developed models with the existing semi-empirical model [1]. Debye behavior of the specific heat capacity is shown to be compatible with a two-temperature scenario, in which, in addition to the classical, experimentally observable temperature that characterizes the distribution of the system over vibrational energy states, a second temperature characterizes the state of the configurational energy landscape. The models here developed have been applied for the interpretation of the experimental ISS signals of supercooled glycerol, illustrating simultaneous and separate assessment of C(ω) and γ(ω) up to sub-100 MHz from thermoelastic transients.

cond-mat.soft↗

arXiv2021

Thermal dynamics and electronic temperature waves in layered correlated materials

We explore layered strongly correlated materials as a platform to identify and control unconventional heat transfer phenomena. We demonstrate that these systems can be tailored to sustain a wide spectrum of heat transport regimes, ranging from ballistic, to hydrodynamic all the way to diffusive. Within the hydrodynamic regime, wave-like temperature oscillations are predicted up to room temperature. All the above phenomena have a purely electronic origin, stemming from the existence of two components in the electronic system, each one thermalized at different temperatures. The interaction strength can be exploited as a knob to control the different thermal transport regimes. The present results pave the way to transition-metal oxide heterostructures as building blocks for nanodevices exploiting the wave-like nature of heat transfer on the picosecond time scale.

cond-mat.str-el↗

arXiv2020

Temperonic Crystal: a superlattice for temperature waves in graphene

The temperonic crystal, a periodic structure with a unit cell made of two slabs sustaining temperature wave-like oscillations on short time-scales, is introduced. The complex-valued dispersion relation for the temperature scalar field is investigated for the case of a localised temperature pulse. The dispersion discloses frequency gaps, tunable upon varying the slabs thermal properties. Results are shown for the paradigmatic case of a graphene-based temperonic crystal. The temperonic crystal extends the concept of superlattices to the realm of temperature waves, allowing for coherent control of ultrafast temperature pulses in the hydrodynamic regime at above liquid nitrogen temperatures.

cond-mat.mes-hall↗

arXiv2019

Accessing temperature waves: a dispersion relation perspective

In order to account for non-Fourier heat transport, occurring on short time and length scales, the often-praised Dual-Phase-Lag (DPL) model was conceived, introducing a causality relation between the onset of heat flux and the temperature gradient. The most prominent aspect of the first-order DPL model is the prediction of wave-like temperature propagation, the detection of which still remains elusive. Among the challenges to make further progress is the capability to disentangle the intertwining of the parameters affecting wave-like behaviour. This work contributes to the quest, providing a straightforward, easy-to-adopt, analytical mean to inspect the optimal conditions to observe temperature wave oscillations. The complex-valued dispersion relation for the temperature scalar field is investigated for the case of a localised temperature pulse in space, and for the case of a forced temperature oscillation in time. A modal quality factor is introduced showing that, for the case of the temperature gradient preceding the heat flux, the material acts as a bandpass filter for the temperature wave. The bandpass filter characteristics are accessed in terms of the relevant delay times entering the DPL model. The optimal region in parameters space is discussed in a variety of systems, covering nine and twelve decades in space and time-scale respectively. The here presented approach is of interest for the design of nanoscale thermal devices operating on ultra-fast and ultra-short time scales, a scenario here addressed for the case of quantum materials and graphite.

cond-mat.mes-hall↗

arXiv2018

Photoacoustic Sensing of Trapped Fluids in Nanoporous Thin Films: Device Engineering and Sensing Scheme

Accessing fluid infiltration in nanogranular coatings is an outstanding challenge, of relevance for applications ranging from nanomedicine to catalysis. A sensing platform, allowing to quantify the amount of fluid infiltrated in a nanogranular ultrathin coating, with thickness in the 10 to 40 nm range, is here proposed and theoretically investigated by multiscale modelling. The scheme relies on impulsive photoacoustic excitation of hypersonic mechanical breathing modes in engineered gas-phase synthesised nanogranular metallic ultathin films and time-resolved acousto-optical read-out of the breathing modes frequency shift upon liquid infiltration. A superior sensitivity, exceeding 26x103 cm^2/g, is predicted upon equivalent areal mass loading of a few ng/mm^2. The capability of the present scheme to discriminate among different infiltration patterns is discussed. The platform is an ideal tool to investigate nano fluidics in granular materials and naturally serves as a distributed nanogetter coating, integrating fluid sensing capabilities. The proposed scheme is readily extendable to other nanoscale and mesoscale porous materials.

physics.app-ph↗