arXiv subjects

Marco Laurati

Publications and source records attributed to Marco Laurati.

13 recordsLinked to original sources

arXiv2026

Heterogeneous collapse in thermoresponsive copolymer microgels varying molar composition

Understanding the internal architecture of copolymer microgels is crucial for establishing how nanoscale polymer organization controls their stimuli-responsive behavior. Here we focus on thermoresponsive P(N-isopropylacrylamide-co-N-isopropyl-methacrylamide), P(NIPAM-co-NIPMAM), microgels with varying mole fraction of the components, synthesized via radical precipitation polymerization, and we demonstrate that changes in their volume phase transition and equilibrium swelling are governed by composition-dependent internal heterogeneity. Comparison between small-angle neutron scattering (SANS) with isotopic labeling and monomer-resolved simulations show a block-like monomer distribution of the two components. SANS analysis reveals a universal maximum in the polymer mesh correlation length near the transition, evidencing coexistence of collapsed NIPAM-rich and swollen domains. The correlation length increases with increasing NIPMAM content, with a maximum for 75 mol \% NIPMAM, implying sparse collapsed regions within the network and thus a large degree of heterogeneity induced by the presence of an increasingly large fraction of intercalated, non-collapsing PNIPMAM. The maximum heterogeneity correlates with the equilibrium swelling ratio, indicating that collapsed microgels retain a structural memory of the transition and present a less-compliant structure in response to temperature variations. Overall, these insights highlight a complex effect of the block-like monomer distribution on the responsive properties of copolymer microgels with different compositions, thus providing a design rule for tailoring responsive colloids for functional soft materials.

cond-mat.soft↗

arXiv2026

Resolving Light-Induced Structural Rearrangements in Responsive Microgels

Optically-responsive microgels offer a versatile platform for designing adaptive soft materials with coupled light and thermal responsiveness. Control over the crosslinking degree is particularly appealing as it can regulate not only particle size but also stiffness, thereby enabling remote tuning of key material functionalities. However, the internal structural changes that couple molecular photoresponsive mechanisms to mesoscopic properties remain poorly resolved. Here, we investigate different light-responsive microgels containing covalently incorporated coumarin moieties, which impart optical sensitivity through UV-induced cycloaddition, by combining dynamic light scattering, small-angle neutron scattering, and molecular dynamics simulations. We show that light irradiation alters not only particle size but also the internal polymer density distribution and subsequent thermal response. Before irradiation, the microgels exhibit a star-like architecture with a dense core and extended polymeric arms. After irradiation, the network evolves toward a markedly more compact structure. This transformation cannot be rationalized simply as an equivalent to an increase in crosslinking density during synthesis, as observed in the thermal response, revealing light as a powerful tool to regulate microgel architecture and multifunctional responsiveness.

cond-mat.soft↗

arXiv2025

Thermoresponsive copolymer microgels synthesized via single-step precipitation polymerization: random or block structure?

The inner structure of polymeric particles critically influences their phase behavior and functionality, governing their mechanical properties and their physical and chemical interactions. For thermoresponsive microgels, i.e. colloidal particles comprising a crosslinked polymer network that undergo a volume transition upon temperature changes, structural control is key to tailor the material responsivity and broaden the range of applications. In this work, we present a comprehensive investigation of the internal structure of poly(N-isopropylacrylamide-co-N-isopropylmethacrylamide), P(NIPAM-co-NIPMAM), copolymer microgels, combining small-angle neutron scattering (SANS), dynamic light scattering (DLS), and nuclear magnetic resonance (NMR) measurements with multi-scale simulations. By synthesizing different samples, we probe the microgels swelling behavior, revealing distinct signatures of the individual polymers. To elucidate their internal distribution, we perform monomer-resolved microgel simulations across different copolymer models. A direct comparison between experimental and numerical form factors under different, neutron-selective conditions provides evidence of a preferential organization into block structures rather than a random arrangement. These results are confirmed by 13C-NMR which reveals the clear presence of NIPAM blocks within a more random arrangement of the remaining monomers and by atomistic molecular dynamics simulations on copolymer chains, which also shed light on a possible origin in the dependence of the hydrogen bonding capability on the local environment. These findings provide a detailed microscopic picture of the inner architecture of P(NIPAM-co-NIPMAM) microgels, revealing an unexpected structural organization that may be generalized to other copolymer systems and could be promising to tailor microgel design and enhance control of material responsivity.

cond-mat.soft↗

arXiv2025

Star-like thermoresponsive microgels: a new class of soft nanocolloids

We provide experimental and numerical evidence of a new class of soft nanocolloids: star-like microgels with thermoresponsive character. This is achieved by using the standard precipitation polymerization synthesis of poly(N-isopropylacrylamide) (PNIPAM) microgels and replacing the usually employed crosslinking agent, N,N'-methylenebis(acrylamide) (BIS), with ethylene glycol dimethacrylate (EGDMA). The fast reactivity of EGDMA combined with its strong tendency to self-bind produces colloidal networks with a central, crosslinker-rich core, surrounded by a corona of long, crosslinker-free arms. These novel star-like microgels fully retain PNIPAM thermoresponsivity and undergo a volume phase transition at a temperature of 32{\deg}C that is very sharp as compared to standard PNIPAM-BIS microgels, independently of crosslinker content. Dynamic light scattering and small angle X-ray scattering experiments are compared to extensive simulation results, based on ideal star polymers as well as on state-of-the-art monomer-resolved simulations, offering a microscopic evidence of the star-like internal structure of PNIPAM-EGDMA microgels. This can be described by a novel model for the form factors combining star and microgel features. The present work thus bridges the fields of star polymers and microgels, providing the former with the ability to respond to temperature via a facile synthetic route that can be routinely employed, opening the way to exploit these soft particles for a variety of fundamental studies and applicative purposes.

cond-mat.soft↗

arXiv2024

Effect of particle stiffness and surface properties on the nonlinear viscoelasticity of dense microgel suspensions

Particle surface chemistry and internal softness are two fundamental parameters in governing the mechanical properties of dense colloidal suspensions, dictating structure and flow, therefore of interest from materials fabrication to processing. Here, we modulate softness by tuning the crosslinker content of poly(N-isopropylacrylamide) microgels, and we adjust their surface properties by co-polymerization with polyethylene glycol (PEG) chains, controlling adhesion, friction and fuzziness. We investigate the distinct effects of these parameters on the entire mechanical response from restructuring to complete fluidization of jammed samples at varying packing fractions under large-amplitude oscillatory shear experiments, and we complement rheological data with colloidal-probe atomic force microscopy to unravel variations in the particles' surface properties. We find that surface properties play a fundamental role at smaller packings; decreasing adhesion and friction at contact causes the samples to yield and fluidify in a lower deformation range. Instead, increasing softness or fuzziness has a similar effect at ultra-high densities, making suspensions able to better adapt to the applied shear and reach complete fluidization over a larger deformation range. These findings shed new light on the single-particle parameters governing the mechanical response of dense suspensions subjected to deformation, offering synthetic approaches to design materials with tailored mechanical properties.

cond-mat.soft↗

arXiv2021

Blunt-end driven re-entrant ordering in quasi two-dimensional dispersions of spherical DNA brushes

We investigate the effects of crowding on the conformations and assembly of confined, highly charged, and thick polyelectrolyte brushes in the osmotic regime. Particle tracking experiments on increasingly dense suspensions of colloids coated with ultra-long double stranded DNA (dsDNA) fragments reveal non-monotonic particle shrinking, aggregation and re-entrant ordering. Theory and simulations show that shrinking is induced by the osmotic pressure exerted by the counterions absorbed in neighbor brushes, while aggregation and re-entrant ordering are the effect of a short-range attraction competing with the electrostatic repulsion. Blunt-end interactions between dsDNA fragments of neighboring brushes are responsible for the attraction and can be tuned by inducing free-end backfolding through the addition of monovalent salt. Our results show that base stacking is a mode parallel to hybridization to steer colloidal assembly, in which attractions can be fine-tuned through salinity and, potentially, grafting density and temperature.

cond-mat.soft↗

arXiv2021

Link between morphology, structure and interactions of composite microgels

We combine small angle scattering experiments and simulations to investigate the internal structure and interactions of composite Poly(N-isopropylacrylamide)-Poly(ethylene glycol) (PNIPAM-PEG) microgels. At low temperatures the experimentally determined form factors and the simulated density profiles indicate a loose internal particle structure with an extended corona, that can be modeled as a star-like object. Increasing temperature across the volumetric phase transition, the form factor develops an inflection which, using simulations, is interpreted as arising from a configuration in which PEG chains are incorporated in the interior of the PNIPAM network. In this configuration a peculiar density profile characterized by two dense, separate regions is observed, at odds with configurations in which the PEG chains reside on the surface of the PNIPAM core. The conformation of the PEG chains have also profound effects on the interparticle interactions: While chains on the surface reduce the solvophobic attractions typically experienced by PNIPAM particles at high temperatures, PEG chains inside the PNIPAM network shift the onset of attractive interaction at even lower temperatures. Our results show that by tuning the morphology of the composite microgels we can qualitatively change both their structure and their mutual interactions, opening the way to explore new collective behaviors of these objects.

cond-mat.soft↗

arXiv2018

Glassy dynamics in asymmetric binary mixtures of hard-spheres

The binary hard-sphere mixture is one of the simplest representations of a many-body system with competing time and length scales. This model is relevant to fundamentally understand both the structural and dynamical properties of materials, such as metallic melts, colloids, polymers and bio-based composites. It also allows us to study how different scales influence the physical behavior of a multicomponent glass-forming liquid; a question that still awaits a unified description. In this contribution, we report on distinct dynamical arrest transitions in highly asymmetric binary colloidal mixtures, namely, a single glass of big particles, in which the small species remains ergodic, and a double glass with the simultaneous arrest of both components. When the mixture approaches any glass transition, the relaxation of the collective dynamics of both species becomes coupled. In the single glass domain, spatial modulations occur due to the structure of the large spheres, a feature not observed in the two-glass domain. The relaxation of the \emph{self} dynamics of small and large particles, in contrast, become decoupled at the boundaries of both transitions; the large species always displays dynamical arrest, whereas the small ones appear arrested only in the double glass. Thus, in order to obtain a complete picture of the distinct glassy states, one needs to take into account the dynamics of both species.

cond-mat.soft↗

arXiv2018

Different scenarios of dynamic coupling in glassy colloidal mixtures

Colloidal mixtures represent a versatile model system to study transport in complex environments. They allow for a systematic variation of the control parameters, namely size ratio, total volume fraction and composition. We study the effects of these parameters on the dynamics of dense suspensions using molecular dynamics simulations and differential dynamic microscopy experiments. We investigate the motion of the small particles through the matrix of large particles as well as the motion of the large particles. A particular focus is on the coupling of the collective dynamics of the small and large particles and on the different mechanisms leading to this coupling. For large size ratios, about 1:5, and an increasing fraction of small particles, the dynamics of the two species become increasingly coupled and reflect the structure of the large particles. This is attributed to the dominant effect of the large particles on the motion of the small particles which is mediated by the increasing crowding of the small particles. Furthermore, for moderate size ratios, about 1:3, and sufficiently high fractions of small particles, mixed cages are formed and hence the dynamics are also strongly coupled. Again, the coupling becomes weaker as the fraction of small particles is decreased. In this case, however, the collective intermediate scattering function of the small particles shows a logarithmic decay corresponding to a broad range of relaxation times.

cond-mat.soft↗

arXiv2017

A Well Defined Glass State Obtained by Oscillatory Shear

We investigate the process of shear melting and re-solidification of a colloidal glass, directly after loading (pre-yielding) and after a series of consecutive strain sweeps (post-yielding). The post-yielding glass shows a significant softening compared to the pre-yielding glass, together with the absence of history effects in successive shear melting protocols, indicating a reproducible process of fluidisation and re-solidification into a glass state unaffected by residual stresses. However, a significant hysteresis characterises strain sweeps with increasing or decreasing strain amplitude. The appearance of history and hysteresis effects coincides with the formation of a glass state, whereas it is not observed in the liquid. We can describe the onset of shear melting over a broad range of volume fractions and frequencies using a recently developed model which describes the yielding process in terms of loss of long-lived nearest neighbours.

cond-mat.soft↗

arXiv2016

Long-lived neighbors determine the rheological response of glasses

Glasses exhibit a liquid-like structure but a solid-like rheological response with plastic deformations only occurring beyond yielding. Thus, predicting the rheological behavior from the microscopic structure is difficult, but important for materials science. Here, we consider colloidal suspensions and propose to supplement the static structural information with the local dynamics, namely the rearrangement and breaking of the cage of neighbors. This is quantified by the mean squared nonaffine displacement and the number of particles that remain nearest neighbors for a long time, i.e. long-lived neighbors, respectively. Both quantities are followed under shear using confocal microscopy and are the basis to calculate the affine and nonaffine contributions to the elastic stress, which is complemented by the viscous stress to give the total stress. During start-up of shear, the model predicts three transient regimes that result from the interplay of affine, nonaffine and viscous contributions. Our prediction quantitatively agrees with rheological data and their dependencies on volume fraction and shear rate.

cond-mat.soft↗

arXiv2016

Anomalous dynamics of intruders in a crowded environment of mobile obstacles

Many natural and industrial processes rely on constrained transport, such as proteins moving through cells, particles confined in nanocomposite materials or gels, individuals in highly dense collec- tives and vehicular traffic conditions. These are examples of motion through crowded environments, in which the host matrix may retain some glass-like dynamics. Here we investigate constrained transport in a colloidal model system, in which dilute small spheres move in a slowly rearranging, glassy matrix of large spheres. Using confocal differential dynamic microscopy and simulations, we discover a critical size asymmetry at which anomalous collective transport of the small particles appears, manifested as a logarithmic decay of the density autocorrelation functions. We demonstrate that the matrix mobility is central for the observed anomalous behaviour. These results, crucially depending on size-induced dynamic asymmetry, are of relevance for a wide range of phenomena ranging from glassy systems to cell biology.

cond-mat.soft↗

arXiv2013

Glasses of dynamically asymmetric binary colloidal mixtures: Quiescent properties and dynamics under shear

We investigate mixing effects on the glass state of binary colloidal hard-sphere-like mixtures with large size asymmetry, at a constant volume fraction phi = 0.61. The structure, dynamics and viscoelastic response as a function of mixing ratio reflect a transition between caging by one or the other component. The strongest effect of mixing is observed in systems dominated by caging of the large component. The possibility to pack a large number of small spheres in the free volume left by the large ones induces a pronounced deformation of the cage of the large spheres, which become increasingly delocalised. This results in faster dynamics and a strong reduction of the elastic modulus. When the relative volume fraction of small spheres exceeds that of large spheres, the small particles start to form their own cages, slowing down the dynamics and increasing the elastic modulus of the system. The large spheres become the minority and act as an impurity in the ordering beyond the first neighbour shell, i.e. the cage, and do not directly affect the particle organisation on the cage level. In such a system, when shear at constant rate is applied, melting of the glass is observed due to facilitated out-of-cage diffusion which is associated with structural anisotropy induced by shear.

cond-mat.soft↗