arXiv subjects

Marco Marín-Suárez

Publications and source records attributed to Marco Marín-Suárez.

6 recordsLinked to original sources

arXiv2023

Bolometric detection of Josephson inductance in a highly resistive environment

The Josephson junction is a building block of quantum circuits. Its behavior, well understood when treated as an isolated entity, is strongly affected by coupling to an electromagnetic environment. In 1983, Schmid predicted that a Josephson junction shunted by a resistance exceeding the resistance quantum $\mathbf{\textit{R}}_\mathrm{Q} = h/4e^2 \approx 6.45$ k$\mathbfΩ$ for Cooper pairs would become insulating since the phase fluctuations would destroy the coherent Josephson coupling. However, recent microwave measurements have questioned this interpretation. Here, we insert a small Josephson junction in a Johnson-Nyquist-type setup where it is driven by weak current noise arising from thermal fluctuations. Our heat probe minimally perturbs the junction's equilibrium, shedding light on features not visible in charge transport. We find that the Josephson critical current completely vanishes in DC charge transport measurement, and the junction demonstrates Coulomb blockade in agreement with the theory. Surprisingly, thermal transport measurements show that the Josephson junction acts as an inductor at high frequencies, unambiguously demonstrating that a supercurrent survives despite the Coulomb blockade observed in DC measurements. The discrepancy between these two measurements highlights the difference between the low and the high frequency response of a junction and calls for further theoretical and experimental inputs on the dynamics of Josephson junctions \textcolor{black}{operating at high frequencies in highly resistive environments.

cond-mat.mes-hall↗

arXiv2022

Suppression of back-tunnelling events in hybrid single-electron turnstiles by source-drain bias modulation

Accuracy of single-electron currents produced in hybrid turnstiles at high operation frequencies is, among other errors, limited by electrons tunnelling in the wrong direction. Increasing the barrier transparency between the island and the leads, and the source-drain bias helps to suppress these events in a larger frequency range, although they lead to some additional errors. We experimentally demonstrate a driving scheme that suppresses tunnelling in the wrong direction hence extending the range of frequencies for generating accurate single-electron currents. The main feature of this approach is an additional AC signal applied to the bias with twice the frequency as the one applied to the gate electrode. This allows additional modulation of the island chemical potential. By using the new approach under certain parameters, we improve the single-electron current accuracy by one order of magnitude. Finally, we show through experimentally-contrasted calculations that our method can improve accuracy even in devices for which the usual gate driving gives errors $\sim 10^{-3}$ at high frequencies and can bring them under $5\times 10^{-4}$.

cond-mat.mes-hall↗

arXiv2022

Zero-average bias bidirectional single-electron current generation in a hybrid turnstile

Hybrid turnstiles have proven to generate accurate single-electron currents. The usual operation consists of applying a periodic modulation to a capacitively coupled gate electrode and requires a non-zero DC source-drain bias voltage. Under this operation, a current of the same magnitude and opposite direction can be generated by flipping the polarity of the bias. Here, we demonstrate that accurate single-electron currents can be generated under zero average bias voltage. We achieve this by applying an extra periodic modulation with twice the frequency of the gate signal and zero DC level to the source electrode. This creates a time interval, which is otherwise zero, between the crossings of tunnelling thresholds that enable single-electron tunnelling. Furthermore, we show that within this operation the current direction can be reversed by only shifting the phase of the source signal.

cond-mat.mes-hall↗

arXiv2022

Ultimate accuracy of frequency to power conversion by single-electron injection

We analyze theoretically the properties of the recently introduced and experimentally demonstrated converter of frequency to power. The system is composed of a hybrid single-electron box with normal island and superconducting lead, and the detector of the energy flow using a thermometer on a normal metal bolometer. Here we consider its potential for metrology. The errors in power arise mainly from inaccuracy of injecting electrons at the precise energy equal to the energy gap of the superconductor. We calculate the main systematic error in form of the excess average energy of the injected electrons and its cumulants, and due to sub-gap leakage. We demonstrate by analytic and numerical calculations that the systematic error in detection can, in principle, be made much smaller than the injection errors, which also, with proper choice of system parameters, can be very small, < 1 %, at low enough temperature. Finally we propose a simplified configuration for metrological purposes.

cond-mat.mes-hall↗

arXiv2021

Frequency to power conversion by an electron turnstile

Direct frequency to power conversion (FPC), to be presented here, links both quantities through a known energy, like single-electron transport relates an operation frequency $f$ to the emitted current $I$ through the electron charge $e$ as $I=ef$. FPC is a natural candidate for a power standard resorting to the most basic definition of the watt -- energy, which is traceable to Planck's constant $h$, emitted per unit of time. This time is in turn traceable to the unperturbed ground state hyperfine transition frequency of the caesium 133 atom $Δν_\mathrm{Cs}$; hence, FPC comprises a simple and elegant way to realize the watt. In this spirit, single-photon emission and detection at known rates have been proposed and experimented as radiometric standard. However, nowadays power standards are only traceable to electrical units, i.e., volt and ohm. In this letter, we demonstrate the feasibility of an alternative proposal based on solid-state direct FPC using a SINIS (S = superconductor, N = normal metal, I = insulator) single-electron transistor (SET) accurately injecting $N$ (integer) quasiparticles (qps) per cycle to both leads with discrete energies close to their superconducting gap $Δ$, even at zero drain-source voltage. Furthermore, the bias voltage plays an important role in the distribution of the power among the two leads, allowing for an almost equal injection $NΔf$ to the two. We estimate that under appropriate conditions errors can be well below $1\%$.

cond-mat.mes-hall↗

arXiv2020

Active quasiparticle suppression in a non-equilibrium superconductor

Quasiparticle (qp) poisoning is a major issue that impairs the operation of various superconducting devices. Even though these devices are often operated at temperatures well below the critical point where the number density of excitations is expected to be exponentially suppressed, their bare operation and stray microwave radiation excite the non-equilibrium qps. Here we use voltage-biased superconducting junctions to demonstrate and quantify qp extraction in the turnstile operation of a superconductor-insulator-normal metal-insulator-superconductor single-electron transistor. In this operation regime excitations are injected into the superconducting leads at a rate proportional to the driving frequency. We reach a reduction of density by an order of magnitude even for the highest injection rate of $2.4\times 10^8$ qps per second when extraction is turned on.

cond-mat.mes-hall↗