SearcharxivSearch

arXiv subjects

Marco Pratzer

Publications and source records attributed to Marco Pratzer.

10 recordsLinked to original sources

An Ultra-High Vacuum Scanning Tunneling Microscope with Pulse Tube and Joule-Thomson cooling operating at sub-pm z-noise

We describe a compact ultra-high vacuum (UHV) scanning tunneling microscope (STM) system that does not need any external supply of cooling liquids. It achieves temperatures down to 1.5 K and a z-noise down to 300 fmRMS for the frequency range of 0.1 Hz - 5 kHz (feedback loop off). It employs a pulse tube cryocooler (PTC) and a Joule-Thomson (JT) stage inducing only small temperature oscillations at the STM with amplitude below 1 mK. The challenge to combine an effective vibrational decoupling from the PTC with sufficient thermal conduction is tackled by a multipartite approach. We realize a minimal stiffness of the UHV bellows that connect the PTC and the STM chamber. Fine Copper wires mechanically decouple the PTC stages from cooling plates that carry the thermal shields, the JT stage and the STM. Soft springs decouple the STM from the JT stage. Finally, the STM body has an optimized conical shape and is made of the light and stiff material Shapal Hi MSoft such that a strong reduction of low frequency vibrations results for the tunnel junction. The voltage noise in the tunnel junction is 0.12 mV and an RF antenna close to the tunnel junction provides radio frequency excitations up to 40 GHz with amplitudes up to 10 mV.

physics.ins-det

Mechanisms of skyrmion collapse revealed by sub-nm maps of the transition rate

Magnetic skyrmions are key candidates for novel memory, logic, and neuromorphic computing. An essential property is their topological protection caused by the whirling spin texture as described by a robust integer winding number. However, the realization on an atomic lattice leaves a loophole for switching the winding number via concerted rotation of individual spins. Hence, understanding the unwinding microscopically is key to enhance skyrmion stability. Here, we use spin polarized scanning tunneling microscopy to probe skyrmion annihilation by individual hot electrons and obtain maps of the transition rate on the nanometer scale. By applying an in-plane magnetic field, we tune the collapse rate by up to four orders of magnitude. In comparison with first-principles based atomistic spin simulations, the experiments demonstrate a radial symmetric collapse at zero in-plane magnetic field and a transition to the recently predicted chimera collapse at finite in-plane field. Our work opens the route to design criteria for skyrmion switches and improved skyrmion stability.

cond-mat.mes-hall

Strong and Weak Three-Dimensional Topological Insulators Probed by Surface Science Methods

We review the contributions of surface science methods to discover and improve 3D topological insulator materials, while illustrating with examples from our own work. In particular, we demonstrate that spin-polarized angular-resolved photoelectron spectroscopy is instrumental to evidence the spin-helical surface Dirac cone, to tune its Dirac point energy towards the Fermi level, and to discover novel types of topological insulators such as dual ones or switchable ones in phase change materials. Moreover, we introduce procedures to spatially map potential fluctuations by scanning tunneling spectroscopy and to identify topological edge states in weak topological insulators.

cond-mat.mtrl-sci

Probing the Pinning Strength of Magnetic Vortex Cores with sub-nm Resolution

Topological magnetic textures such as vortex cores or skyrmions are key candidates for non-volatile information processing. This exploits the texture movement by current pulses that is typically opposed by pinning. A detailed understanding of pinning is hence crucial with previous experiments being either limited in terms of controlled magnetic texture positioning or in terms of spatial resolution. Here, we use spin-polarized scanning tunneling microscopy to track a magnetic vortex core that is deliberately moved by a 3D magnetic field. The core covering about 10.000 Fe-atoms gets pinned by defects that are only a few nm apart. Reproducing the vortex path via parameter fit, we deduce the pinning potential of the defects as a mexican hat with short-range repulsive and long-range attractive part. By comparison with micromagnetic simulations, the attractive part is attributed to a local suppression of exchange interaction. The novel approach to deduce defect induced pinning potentials on the sub-nm scale is transferable to other non-collinear spin textures eventually enabling an atomic scale design of defect configurations, e.g., for reliable read-out in race-track type devices.

cond-mat.mes-hall

One-dimensional Si chains embedded in Pt(111)and protected by a hexagonal boron-nitride monolayer

Using scanning tunneling microscopy, we show that Si deposition on Pt(111) at 300K leads to a network of one-dimensional Si chains. On the bare Pt(111) surface, the chains, embedded into the Pt surface, are orientated along the <112>-direction. They disappear within a few hours in ultrahigh vacuum due to the presence of residual gas. Exposing the chains to different gases deliberately reveals that CO is largely responsible for the disappearance of the chains. The chains can be stabilized by a monolayer of hexagonal boron nitride, which is deposited prior to the Si deposition. The resulting Si chains are rotated by 30° with respect to the chains on the bare Pt(111) surface and survive even an exposure to air for 10 minutes.

cond-mat.mes-hall

Mask aligner for ultrahigh vacuum with capacitive distance control

We present a mask aligner driven by three piezo motors which guides and aligns a SiN shadow mask under capacitive control towards a sample surface. The three capacitors for read out are located at the backside of the thin mask such that the mask can be placed in $μ$m distance from the sample surface, while keeping it parallel to the surface. Samples and masks can be exchanged in-situ and the mask can additionally be displaced parallel to the surface. We demonstrate an edge sharpness of the deposited structures below 100 nm, which is likely limited by the diffusion of the deposited Au on Si(111).

physics.app-ph

Tuning the pseudospin polarization of graphene by a pseudo-magnetic field

One of the intriguing characteristics of honeycomb lattices is the appearance of a pseudo-magnetic field as a result of mechanical deformation. In the case of graphene, the Landau quantization resulting from this pseudo-magnetic field has been measured using scanning tunneling microscopy. Here we show that a signature of the pseudo-magnetic field is a local sublattice symmetry breaking observable as a redistribution of the local density of states. This can be interpreted as a polarization of graphene's pseudospin due to a strain induced pseudo-magnetic field, in analogy to the alignment of a real spin in a magnetic field. We reveal this sublattice symmetry breaking by tunably straining graphene using the tip of a scanning tunneling microscope. The tip locally lifts the graphene membrane from a SiO$_2$ support, as visible by an increased slope of the $I(z)$ curves. The amount of lifting is consistent with molecular dynamics calculations, which reveal a deformed graphene area under the tip in the shape of a Gaussian. The pseudo-magnetic field induced by the deformation becomes visible as a sublattice symmetry breaking which scales with the lifting height of the strained deformation and therefore with the pseudo-magnetic field strength. Its magnitude is quantitatively reproduced by analytic and tight-binding models, revealing fields of 1000 T. These results might be the starting point for an effective THz valley filter, as a basic element of valleytronics.

cond-mat.mes-hall

Graphene quantum dots probed by scanning tunneling spectroscopy and transport spectroscopy after local anodic oxidation

Graphene quantum dots are considered as promising alternatives to quantum dots in III-V semiconductors, e.g., for the use as spin qubits due to their consistency made of light atoms including spin-free nuclei which both imply relatively long spin decoherene times. However, this potential has not been realized in experiments so far, most likely, due to a missing control of the edge configurations of the quantum dots. Thus, a more fundamental investigation of Graphene quantum dots appears to be necessary including a full control of the wave function properties most favorably during transport spectroscopy measurements. Here, we review the recent success in mapping wave functions of graphene quantum dots supported by metals, in particular Ir(111), and show how the goal of probing such wave functions on insulating supports during transport spectroscopy might be achieved.

cond-mat.mes-hall

Sub-nm wide electron channels protected by topology

Helical locking of spin and momentum and prohibited backscattering are the key properties of topologically protected states. They are expected to enable novel types of information processing such as spintronics by providing pure spin currents, or fault tolerant quantum computation by using the Majorana fermions at interfaces of topological states with superconductors. So far, the required helical conduction channels used to realize Majorana fermions are generated through application of an axial magnetic field to conventional semiconductor nanowires. Avoiding the magnetic field enhances the possibilities for circuit design significantly. Here, we show that sub-nanometer wide electron channels with natural helicity are present at surface step-edges of the recently discovered topological insulator Bi14Rh3I9. Scanning tunneling spectroscopy reveals the electron channels to be continuous in both energy and space within a large band gap of 200 meV, thereby, evidencing its non-trivial topology. The absence of these channels in the closely related, but topologically trivial insulator Bi13Pt3I7 corroborates the channels' topological nature. The backscatter-free electron channels are a direct consequence of Bi14Rh3I9's structure, a stack of 2D topologically insulating, graphene-like planes separated by trivial insulators. We demonstrate that the surface of Bi14Rh3I9 can be engraved using an atomic force microscope, allowing networks of protected channels to be patterned with nm precision.

cond-mat.mes-hall

Versatile scanning tunneling microscopy with 120ps time resolution

We describe a fully ultra-high vacuum compatible scanning tunneling microscope (STM) optimized for radio-frequency signals. It includes in-situ exchangeable tips adapted to high frequency cabling and a standard sample holder, which offer access to the whole range of samples typically investigated by STM. We demonstrate a time resolution of 120 ps using the nonlinear I(V)-characteristic of the surface of highly oriented pyrolithic graphite. We provide atomically resolved images in pulse mode related to a spatially varying nonlinearity of the local density of states of the sample, thus, demonstrating the possible spatial resolution of the instrument in pulse mode. Analysis of the noise reveals that changes in the tunneling junction of 50 pA are dynamically detectable at 120 ps time resolution.

cond-mat.mes-hall