arXiv subjects

Marco Röllig

Publications and source records attributed to Marco Röllig.

5 recordsLinked to original sources

arXiv2026

Cryogenic source of atomic tritium for neutrino-mass measurements and precision spectroscopy

We propose a concept for a cryogenic source of atomic tritium at sub-Kelvin temperatures and energies suitable for magnetic trapping. The source is based on the dissociation of solid molecular T2 films below 1 K by electrons from a pulsed RF discharge, a technique recently demonstrated for atomic hydrogen, combined with buffer-gas cooling and magnetic confinement. We analyze the key processes limiting the source performance, adsorption, spin exchange and recombination, and show that atomic tritium fluxes exceeding 1e15 1/s at kinetic energies of 100 mK can be achieved at the entrance to the magnetic trap. Such a source would enable Doppler-free two-photon 1S-2S spectroscopy in atomic tritium for high-precision measurements of the triton charge radius, providing a crucial benchmark for bound-state QED and improving the comparison between electronic, muonic, and scattering determinations of nuclear sizes in light systems. Beyond spectroscopy, an atomic tritium source avoids molecular final state broadening in the beta decay and is therefore necessary for next generation neutrino mass measurements; combined with detector technologies such as sub-eV resolution quantum sensors or cyclotron radiation emission spectroscopy, it enables an order of magnitude improvement compared to the current best experimental limit. Additionally, the source can be used to generate a beam of low field seeking deuterium atoms for loading magnetic traps, an important benchmark before trapping tritium atoms, which is useful for precision spectroscopy.

physics.atom-ph↗

arXiv2025

Tritium accumulation and ozone decontamination of tungsten and beryllium

Tritium adsorption on surfaces creates a variety of issues, ranging from the fields of fusion applications to small and large-scale laboratory experiments using tritium. The extent to which tritium accumulates on surfaces is generally material-dependent and must be determined through experiments. Additionally, this surface contamination necessitates the implementation of appropriate decontamination procedures, preferably in-situ. A suitable method could be exposure to ozone during UV irradiation. However, it is currently not known if both components are necessary for the decontamination. At Tritium Laboratory Karlsruhe, both questions on contamination and decontamination can be addressed using a single experimental setup. With this, it is possible to expose solid samples to gaseous tritium to measure the temporal activity evolution. Furthermore, the system can be filled with dry air, and dry air containing ozone to explore their decontamination effect. Both measurement modes were applied to beryllium and tungsten samples, which were chosen for their relevance in fusion. The beryllium surface was observed to accumulate tritium more than four times faster than tungsten when exposed to gaseous tritium. Concerning the decontamination, without simultaneous UV irradiation, exposure to ozone did not have any distinct effect on the surface activity compared to simply using dry air. This leads to the conclusion that UV illumination of the surfaces is required to achieve a significant decontamination factor.

cond-mat.mtrl-sci↗

arXiv2025

Sterile-neutrino search based on 259 days of KATRIN data

Neutrinos are the most abundant fundamental matter particles in the Universe and play a crucial role in particle physics and cosmology. Neutrino oscillation, discovered about 25 years ago, reveals that the three known species mix with each other. Anomalous results from reactor and radioactive-source experiments suggest a possible fourth neutrino state, the sterile neutrino, which does not interact via the weak force. The KATRIN experiment, primarily designed to measure the neutrino mass via tritium $β$-decay, also searches for sterile neutrinos suggested by these anomalies. A sterile-neutrino signal would appear as a distortion in the $β$-decay energy spectrum, characterized by a discontinuity in curvature (kink) related to the sterile-neutrino mass. This signature, which depends only on the shape of the spectrum rather than its absolute normalization, offers a robust, complementary approach to reactor experiments. KATRIN examined the energy spectrum of 36 million tritium $β$-decay electrons recorded in 259 measurement days within the last 40 electronvolt below the endpoint. The results exclude a substantial part of the parameter space suggested by the gallium anomaly and challenge the Neutrino-4 claim. Together with other neutrino-disappearance experiments, KATRIN probes sterile-to-active mass splittings from a fraction of an electron-volt squared to several hundred electron-volts squared, excluding light sterile neutrinos with mixing angles above a few percent.

hep-ex↗

arXiv2022

Operation Modes of the KATRIN Experiment Tritium Loop System using $^{83\mathrm{m}}$Kr

The KArlsruhe TRItium Neutrino (KATRIN) experiment aims to search for the effective electron antineutrino mass with a sensitivity of 0.2 eV (90 % C.L.). In order to achieve this goal, KATRIN measurement phases focusing on the neutrino mass search are alternated with phases of investigations of systematic effects. During these phases, metastable $^{83\mathrm{m}}$Kr is used as a calibration source. The monoenergetic conversion electrons emitted accompanying the decay of $^{83\mathrm{m}}$Kr allow a direct access to the starting conditions of $β$-electrons produced inside the windowless gaseous tritium source (WGTS) of KATRIN. To make use of $^{83\mathrm{m}}$Kr in the WGTS, the Tritium Loop System, which provides a stable flow of tritium to the WGTS, needs to be operated in special modes. This paper focuses on the technical implementation of these modes and their performance with regard to the achievable $^{83\mathrm{m}}$Kr-rates, gas densities, and gas compositions inside the WGTS.

physics.ins-det↗

arXiv2020

Neutral tritium gas reduction in the KATRIN differential pumping sections

The KArlsruhe TRItium Neutrino experiment (KATRIN) aims to measure the effective electron anti-neutrino mass with an unprecedented sensitivity of $0.2\,\mathrm{eV}/\mathrm{c}^2$, using $β$-electrons from tritium decay. The electrons are guided magnetically by a system of superconducting magnets through a vacuum beamline from the windowless gaseous tritium source through differential and cryogenic pumping sections to a high resolution spectrometer and a segmented silicon pin detector. At the same time tritium gas has to be prevented from entering the spectrometer. Therefore, the pumping sections have to reduce the tritium flow by more than 14 orders of magnitude. This paper describes the measurement of the reduction factor of the differential pumping section performed with high purity tritium gas during the first measurement campaigns of the KATRIN experiment. The reduction factor results are compared with previously performed simulations, as well as the stringent requirements of the KATRIN experiment.

physics.ins-det↗