arXiv subjects

Marek Cieslar

Publications and source records attributed to Marek Cieslar.

6 recordsLinked to original sources

arXiv2024

Adaptive algorithms for low-latency cancellation of seismic Newtonian-noise at the Virgo gravitational-wave detector

A system was recently implemented in the Virgo detector to cancel noise in its data produced by seismic waves directly coupling with the suspended test masses through gravitational interaction. The data from seismometers are being filtered to produce a coherent estimate of the associated gravitational noise also known as Newtonian noise. The first implementation of the system uses a time-invariant (static) Wiener filter, which is the optimal filter for Newtonian-noise cancellation assuming that the noise is stationary. However, time variations in the form of transients and slow changes in correlations between sensors are possible and while time-variant filters are expected to cope with these variations better than a static Wiener filter, the question is what the limitations are of time-variant noise cancellation. In this study, we present a framework to study the performance limitations of time-variant noise cancellation filters and carry out a proof-of-concept with adaptive filters on seismic data at the Virgo site. We demonstrate that the adaptive filters, at least those with superior architecture, indeed significantly outperform the static Wiener filter with the residual noise remaining above the statistical error bound.

gr-qc↗

arXiv2023

Reconstructing the star formation rate for compact binary populations with the Einstein telescope

The Einstein Telescope (ET) is a proposed third-generation, wide-band gravitational wave (GW) detector. Given its improved detection sensitivity in comparison to the second-generation detectors, it will be capable of exploring the Universe with GWs up to very high redshifts. In this paper, we present a population-independent method to infer the functional form of star formation rate density (SFR) for different populations of compact binaries originating in stars from Population (Pop) I+II and Pop III using ET as a single instrument. We use an algorithm to answer three major questions regarding the SFR of different populations of compact binaries. Specifically, these questions refer to the termination redshift of the formation of Pop III stars, the redshift at peak SFR, and the functional form of SFR at high redshift, all of which remain to be elucidated. We show that the reconstruction of SFR as a function of redshift for the different populations of compact binaries is independent of the time-delay distributions up to $z \sim 14,$ and that the accuracy of the reconstruction only strongly depends on this distribution at higher redshifts of $z\gtrsim 14$. We define the termination redshift for Pop III stars as the redshift where the SFR drops to 1\% of its peak value. In this analysis, we constrain the peak of the SFR as a function of redshift and show that ET as a single instrument can distinguish the termination redshifts of different SFRs for Pop III stars, which have a true separation of at least $Δz \sim 2$. The accurate estimation of the termination redshift depends on correctly modelling the tail of the time-delay distribution, which constitutes delay times of $\gtrsim 8$ Gyr.

astro-ph.HE↗

arXiv2023

Design and implementation of a seismic Newtonian-noise cancellation system for the Virgo gravitational-wave detector

Terrestrial gravity perturbations caused by seismic fields produce the so-called Newtonian noise in gravitational-wave detectors, which is predicted to limit their sensitivity in the upcoming observing runs. In the past, this noise was seen as an infrastructural limitation, i.e., something that cannot be overcome without major investments to improve a detector's infrastructure. However, it is possible to have at least an indirect estimate of this noise by using the data from a large number of seismometers deployed around a detector's suspended test masses. The noise estimate can be subtracted from the gravitational-wave data; a process called Newtonian-noise cancellation (NNC). In this article, we present the design and implementation of the first NNC system at the Virgo detector as part of its AdV+ upgrade. It uses data from 110 vertical geophones deployed inside the Virgo buildings in optimized array configurations. We use a separate tiltmeter channel to test the pipeline in a proof-of-principle. The system has been running with good performance over months.

gr-qc↗

arXiv2019

Characterization of atmospheric properties at the future sites of the Cherenkov Telescope Array

Advanced knowledge of the detailed atmospheric properties of both the future sites of the Cherenkov Telescope Array is essential in preparation of the arrival of the first scientific data. Meteorological variables are studied using a dedicated characterization station installed at the southern site in Chile and a wealth of data from existing observatories around the northern site on the La Palma island. Campaigns using radiosondes launched on balloons are foreseen to complement these data in the near future. Cloudiness during the night has been continuously monitored at both sites for several years using All-sky Cameras which assess the presence of clouds based on detection of stars. The integrated aerosol optical depth over the southern site has been measured using a Sun/Moon Photometer since 2016 and the small robotic FRAM telescope since 2017; identical instruments have been deployed at the northern site in autumn 2018. Also in October 2018, the ARCADE Raman lidar (RL) has started to take measurements on routine basis at the northern site, providing data on the vertical profile of the aerosol optical properties (i.e., extinction and scattering) and of the water vapour mixing ratio. We present the data currently available from these instruments from both sites with emphasis on characteristics important for the (future) operation of Imaging Atmospheric Cherenkov Telescopes.

astro-ph.IM↗

arXiv2016

Astroclimatic Characterization of Vallecitos: A candidate site for the Cherenkov Telescope Array at San Pedro Martir

We conducted an 18 month long study of the weather conditions of the Vallecitos, a proposed site in Mexico to harbor the northern array of the Cherenkov Telescope Array (CTA). It is located in Sierra de San Pedro Martir (SPM) a few kilometers away from Observatorio Astronómico Nacional. The study is based on data collected by the ATMOSCOPE, a multi-sensor instrument measuring the weather and sky conditions, which was commissioned and built by the CTA Consortium. Additionally, we compare the weather conditions of the optical observatory at SPM to the Vallecitos regarding temperature, humidity, and wind distributions. It appears that the excellent conditions at the optical observatory benefit from the presence of microclimate established in the Vallecitos.

astro-ph.IM↗

arXiv2015

Instrumentation for comparing night sky quality and atmospheric conditions of CTA site candidates

Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision, thus a comparison of the proposed sites and final decision based on a comprehensive characterization is impossible. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor, a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize its performance.

astro-ph.IM↗