arXiv subjects

Margareta Wagner

Publications and source records attributed to Margareta Wagner.

14 recordsLinked to original sources

arXiv2026

The absence of a central metal ion destabilizes phthalocyanine on In$_2$O$_3$(111)

Metal phthalocyanines (MPc) are a versatile molecular platform for applications ranging from organic optoelectronic devices to single-atom catalysis (SAC). Their adsorption and layer formation on the prototypical transparent electrode substrates of organic optoelectronic devices is directly relevant for charge injection and transport across the organic-oxide interface. Moreover, the well-defined M-N$_4$ coordination of the metal cation defines their activity as SACs for (electro-)catalysis. Here, the adsorption of the metal-free phthalocyanine (H$_2$Pc) is characterized on In$_2$O$_3$(111) using low-temperature STM, nc-AFM, and STS. In$_2$O$_3$ is not only a model system of indium tin oxide (ITO) but also an active catalytic material for CO$_2$ reduction. H$_2$Pc adsorbs in the same site and configuration reported for copper phthalocyanine [J. Mater. Chem. C 13, 17650-17661 (2025)] and for the majority of cobalt phthalocyanine [Surf. Sci. 722, 122065 (2022)]. Despite this shared preference in adsorption site, H$_2$Pc cannot be organized into extended and ordered monolayer structures by gentle annealing: the molecule starts to decompose at $\approx$50$^\circ$C, well below the temperature used to grow monolayers of CoPc and CuPc. Self-metalation is not observed on stoichiometric In$_2$O$_3$(111). On the reduced surface where In$^0$ adatoms are present, new H$_2$Pc-related features appear but cannot be identified by imaging only. The comparison of H$_2$Pc with CoPc and CuPc identifies distinct roles of the central metal ion in the metal-Pc/In$_2$O$_3$(111) systems: it acts as a structural anchor that stabilizes the macrocycle against decomposition on the surface, and it modifies the frontier-orbital character in ways that determine whether a second adsorption configuration is populated.

cond-mat.mtrl-sci↗

arXiv2025

When Surface Dynamics Fakes Symmetry -- Oxygen on Rh(100) Revisited

Heating a long-range ordered adsorbate phase beyond its stability temperature does not necessarily result in a disordered phase, it can also break up into heavily fluctuating ordered domains. Temporal and/or spatial averaging over these fluctuations may give the impression of both a wrong periodicity and a false local symmetry. This can happen even below liquid-nitrogen temperature, so that the true nature of the phase might remain undetected. We demonstrate this scenario at the catalytically active Rh(100) surface covered by 1/2 monolayer of oxygen, using quantitative low energy electron diffraction (LEED), variable-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). Using the example of CO adsorption, we show that local symmetry can have a decisive influence on the binding energy and thus the chemical reactivity.

cond-mat.mtrl-sci↗

arXiv2025

Molecular Arrangements in the First Monolayer of Cu-Phthalocyanine on In$_2$O$_3$(111)

Well-ordered organic molecular layers on oxide surfaces are key for organic electronics. Using a combination of scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) we probe the structures of copper phthalocyanine (CuPc) on In$_2$O$_3$, a model for a prototypical transparent conductive oxide (TCO). These scanning-probe images allow the direct determination of the adsorption site and distortions of the molecules, which are corroborated by DFT calculations. Isolated CuPc molecules adsorb in a flat, slightly tilted geometry in three symmetry-equivalent configurations on the stoichiometric In$_2$O$_3$(111) surface. Increasing the coverage leads to densely-packed 1D chains oriented along $\langle1\bar{1}0\rangle$ directions, which dissolve into a highly ordered (2$\times$2) superstructure upon increasing the CuPc density to 3/4 per surface unit cell. At a coverage of one CuPc per surface unit cell, a densely packed (1$\times$1) superstructure fully covers the surface. The molecules still assume the same site and orientation as before, but they partially overlap to accommodate the high packing density, leading to a bending of the molecules. These results are compared to the behavior of CoPc on In$_2$O$_3$(111). In summary, we demonstrate that a uniform first layer of metal-phthalocyanine molecules can be realized on the In$_2$O$_3$(111) surface when using the proper metal atom in the molecule.

cond-mat.mtrl-sci↗

arXiv2025

Multi-Technique Characterization of Rhodium Gem-Dicarbonyls on TiO$_2$(110)

Gem-dicarbonyls of transition metals supported on metal (oxide) surfaces are common intermediates in heterogeneous catalysis. While infrared (IR) spectroscopy is a standard tool for detecting these species on applied catalysts, the ill-defined crystallographic environment of species observed on powder catalysts renders data interpretation challenging. In this work, we apply a multi-technique surface science approach to investigate rhodium gem-dicarbonyls on a single-crystalline rutile TiO$_2$(110) surface. We combine spectroscopy, scanning probe microscopy, and Density Functional Theory (DFT) to determine their location and coordination on the surface. IR spectroscopy shows the successful creation of gem-dicarbonyls on a titania single crystal by exposing deposited Rh atoms to CO gas, followed by annealing to 200-250 K. Low-temperature scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) data reveal that these complexes are mostly aligned along the [001] crystallographic direction, corroborating theoretical predictions. Notably, x-ray photoelectron spectroscopy (XPS) data reveal multiple rhodium species on the surface, even when the IR spectra show only the signature of rhodium gem-dicarbonyls. As such, our results highlight the complex behavior of carbonyls on metal oxide surfaces, and demonstrate the necessity of multi-technique approaches for the adequate characterization of single-atom catalysts.

physics.chem-ph↗

arXiv2023

The effect of different In$_2$O$_3$(111) surface terminations on CO$_2$ adsorption

In$_2$O$_3$-based catalysts have shown high activity and selectivity for CO$_2$ hydrogenation to methanol, however the origin of the high performance of In$_2$O$_3$ is still unclear. To elucidate the initial steps of CO$_2$ hydrogenation over In$_2$O$_3$, we have combined X-ray Photoelectron Spectroscopy (XPS) and Density Functional Theory (DFT) calculations to study the adsorption of CO$_2$ on the In$_2$O$_3$(111) crystalline surface with different terminations, namely the stoichiometric, the reduced, and the hydroxylated surface, respectively. The combined approach confirms that the reduction of the surface results in the formation of In ad-atoms and that water dissociates on the surface at room temperature. A comparison of the experimental spectra and the computed core-level-shifts (using methanol and formic acid as benchmark molecules) suggests that CO$_2$ adsorbs as a carbonate on all surface terminations. We find that CO$_2$ adsorption is hindered by hydroxyl groups on the hydroxylated surface.

cond-mat.mtrl-sci↗

arXiv2023

Adsorption configurations of Co-phthalocyanine on In2O3(111)

Indium oxide offers optical transparency paired with electric conductivity, a combination required in many optoelectronic applications. The most-stable In2O3(111) surface has a large unit cell (1.43 nm lattice constant). It contains a mixture of both bulk-like and undercoordinated O and In atoms and provides an ideal playground to explore the interaction of surfaces with organic molecules of similar size as the unit cell. Non-contact atomic force microscopy (nc-AFM), scanning tunneling microscopy (STM), and density functional theory (DFT) were used to study the adsorption of Co-phthalocyanine (CoPc) on In2O3(111). Isolated CoPc molecules adsorb at two adsorption sites in a 7:3 ratio. The Co atom sits either on top of a surface oxygen ('F configuration') or indium atom ('S configuration'). This subtle change in adsorption site induces bending of the molecules, which is reflected in their electronic structure. According to DFT the lowest unoccupied molecular orbital of the undistorted gas-phase CoPc remains mostly unaffected in the F configuration but is filled by one electron in S configuration. At coverages up to one CoPc molecule per substrate unit cell, a mixture of domains with molecules in F and S configuration are found. Molecules at F sites first condense into a F-(2x2) structure and finally rearrange into a F-(1x1) symmetry with partially overlapping molecules, while S-sited molecules only assume a S-(1x1) superstructure.

cond-mat.mtrl-sci↗

arXiv2023

The prototypical organic-oxide interface: intra-molecular resolution of sexiphenyl on In$_2$O$_3$(111)

The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This work focuses on the prototypical organic semiconductor para-sexiphenyl (6P) adsorbed on In$_2$O$_3$(111), the thermodynamically most stable surface of the material that the most common transparent conducting oxide, indium tin oxide (ITO) is based on. The onset of nucleation and formation of the first monolayer are followed with atomically-resolved scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Annealing to 200$^\circ$C provides sufficient thermal energy for the molecules to orient themselves along the high-symmetry directions of the surface, leading to a single adsorption site. The AFM data suggests a twisted adsorption geometry. With increasing coverage, the 6P molecules first form a loose network with poor long-range order. Eventually the molecules re-orient and form an ordered monolayer. This first monolayer has a densely packed, well-ordered (2$\times$1) structure with one 6P per In$_2$O$_3$(111) substrate unit cell, i.e., a molecular density of 5.64$\times$10$^{13}$ cm$^{-2}$.

cond-mat.mtrl-sci↗

arXiv2023

Water Structures Reveal Local Hydrophobicity on the In2O3(111) Surface

Clean oxide surfaces are generally hydrophilic. Water molecules anchor at undercoordinated surface metal atoms that act as Lewis-acid sites, and they are stabilized by H bonds to undercoordinated surface oxygens. The large unit cell of In2O3(111) provides surface atoms in various configurations, which leads to chemical heterogeneity and a local deviation from this general rule. Experiments (TPD, XPS, ncAFM) agree quantitatively with DFT calculations and show a series of distinct phases. The first three water molecules dissociate at one specific area of the unit cell and desorb above room temperature. The next three adsorb as molecules in the adjacent region. Three more water molecules rearrange this structure and an additional nine pile up above the OH groups. Despite offering undercoordinated In and O sites, the rest of the unit cell is unfavorable for adsorption and remains water-free. The first water layer thus shows ordering into nanoscopic 3D water clusters separated by hydrophobic pockets.

cond-mat.mtrl-sci↗

arXiv2023

Direct assessment of the proton affinity of individual surface hydroxyls with non-contact atomic force microscopy

The state of protonation/deprotonation of surfaces has far-ranging implications in all areas of chemistry: from acid-base catalysis$^1$ and the electro- and photocatalytic splitting of water$^2$, to the behavior of minerals$^3$ and biochemistry$^4$. The acidity of a molecule or a surface site is described by its proton affinity (PA) and pK$_\mathrm{a}$ value (the negative logarithm of the equilibrium constant of the proton transfer reaction in solution). For solids, in contrast to molecules, the acidity of individual sites is difficult to assess. For mineral surfaces such as oxides they are estimated by semi-empirical concepts such as bond-order valence sums$^5$, and also increasingly modeled with first-principles molecular dynamics simulations$^{6,7}$. Currently such predictions cannot be tested - the experimental measures used for comparison are typically average quantities integrated over the whole surface or, in some cases, individual crystal facets$^8$, such as the point of zero charge (pzc)$^9$. Here we assess individual hydroxyls on In$_2$O$_3$(111), a model oxide with four different types of surface oxygen atoms, and probe the strength of their hydrogen bond with the tip of a non-contact atomic force microscope (AFM). The force curves are in quantitative agreement with density-functional theory (DFT) calculations. By relating the results to known proton affinities and pK$_\mathrm{a}$ values of gas-phase molecules, we provide a direct measure of proton affinity distributions at the atomic scale.

cond-mat.mtrl-sci↗

arXiv2021

An oxygen-rich, tetrahedral surface phase on high-temperature rutile VO$_2$(110)$_\text{T}$ single crystals

Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-scale investigation of the tetragonal rutile VO$_2$(110)$_\text{T}$ single-crystal surface and reports results obtained with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS), supported by density-functional theory-based (DFT) calculations. The surface reconstructs into an oxygen-rich (2$\times$2) superstructure that coexists with small patches of the underlying, unreconstructed (110)-(1$\times$1) surface. The best structural model for the (2$\times$2) surface termination, conceptually derived from a vanadium pentoxide (001) monolayer, consists of rings of corner-shared tetrahedra. Over a wide range of oxygen chemical potentials this reconstruction is more stable than the unreconstructed (110) surface as well as models proposed in the literature.

cond-mat.mtrl-sci↗

arXiv2019

Revealing the Buried Metal-Organic Interface: Restructuring of the First Layer by van der Waals Forces

Using molecular manipulation in a cryogenic scanning tunneling microscope, the structure and rearrangement of sexiphenyl molecules at the buried interface of the organic film with the Cu(110) substrate surface have been revealed. It is shown that a reconstruction of the first monolayer of flat lying molecules occurs due to the van der Waals pressure from subsequent layers. In this rearrangement, additional sexiphenyl molecules are forced into the established complete monolayer and adopt an edge-on configuration. Incorporation of second layer molecules into the first layer is also demonstrated by purposely pushing sexiphenyl molecules with the STM tip. The results indicate that even chemisorbed organic layers at interfaces can be significantly influenced by external stress from van der Waals forces of subsequent layers.

cond-mat.mtrl-sci↗

arXiv2018

Stabilizing Single Ni adatoms on a Two-dimensional Porous Titania Overlayer at the SrTiO$_3$(110) Surface

Nickel vapor-deposited on the SrTiO$_3$(110) surface was studied using scanning tunneling microscopy, photoemission spectroscopy (PES), and density functional theory calculations. This surface forms a (4 $\times$ 1) reconstruction, composed of a 2-D titania structure with periodic six- and ten-membered nanopores. Anchored at these nanopores, Ni single adatoms are stabilized at room temperature. PES measurements show that the Ni adatoms create an in-gap state located at 1.9 eV below the conduction band minimum and induce an upward band bending. Both experimental and theoretical results suggest that Ni adatoms are positively charged. Our study produces well-dispersed single-adatom arrays on a well-characterized oxide support, providing a model system to investigate single-adatom catalytic and magnetic properties.

cond-mat.mtrl-sci↗

arXiv2018

Well-Ordered In Adatoms at the In$_2$O$_3$(111) Surface Created by Fe Deposition

Metal deposition on oxide surfaces usually results in adatoms, clusters, or islands of the deposited material, where defects in the surface often act as nucleation centers. Here an alternate configuration is reported. After the vapor deposition of Fe on the In$_2$O$_3$(111) surface at room temperature, ordered adatoms are observed with scanning tunneling microscopy. These are identical to the In adatoms that form when the sample is reduced by heating in ultrahigh vacuum. Density functional theory (DFT) calculations confirm that Fe interchanges with In in the topmost layer, pushing the excess In atoms to the surface where they arrange as a well-ordered adatom array.

cond-mat.mtrl-sci↗

arXiv2018

Sexiphenyl on Cu(100): nc-AFM tip functionalization and identification

The contrast obtained in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) images is determined by the tip termination and symmetry. Functionalizing the tip with a single metal atom, CO molecule or organic species has been shown to provide high spatial resolution and insights into tip-surface interactions. A topic where this concept is utilized is the adsorption of organic molecules at surfaces. With this work we aim to contribute to the growing database of organic molecules that allow assignment by intra-molecular imaging. We investigated the organic molecule para-sexiphenyl (C36H26, 6P) on Cu(100) using low-temperature STM and non-contact AFM with intra-molecular resolution. In the sub-monolayer regime we find a planar and flat adsorption with the 6P molecules rotated 10° off the <010> directions. In this configuration, four of the six phenyl rings occupy almost equivalent sites on the surface. The 6P molecules are further investigated with CO- functionalized tips, in comparison to a single-atom metal and 6P-terminated tip. We also show that the procedure of using adsorbed CO to characterize tips introduced by Hofmann et al. Phys. Rev. B 112 (2014) 066101 is useful when the tip is terminated with an organic molecule.

cond-mat.mtrl-sci↗