arXiv subjects

Maria J. Rioja

Publications and source records attributed to Maria J. Rioja.

15 recordsLinked to original sources

arXiv2026

Spatio-kinematical structure of the Galactic Nuclear Stellar Disk revealed in VLBI astrometry of circumstellar masers

SKA-VLBI astrometry will enable us to measure up to thousands of three dimensional motions of OH masers associated with circumstellar envelopes (CSEs) of OH/IR stars in the Nuclear Stellar Disk (NSD) and sites of high mass star formation in the Central Molecular Zone (CMZ) of the Galactic Center (GC). It is expected that the spatio-kinematical distribution of those OH masers should indicate the existence of a ring structure in the NSD, which has formed as a result of outward propagation of star-formation activities in the GC. This is likely visualized clearly by a group of OH/IR stars, some of which should have stellar pulsation periods of >400 days and the corresponding ages of <500 Myr, and some sites of ongoing star formation. These OH/IR stars should host 1612-MHz OH masers, some of which should become targets of huge-sample VLBI astrometry, in moderate accuracy, in SKA-MID Band 2 (~1.6 GHz). The data of maser source proper motions will exhibit a stream motion in the stellar ring structure. Furthermore, the information of accurate distances (error <100 pc) of the maser sources are necessary to directly find the major-axis direction of a possible elliptical ring of stars at ~8 kpc. These distances may be yielded through trigonometric parallaxes measurable in SKA-MID Band 5a (5--7 GHz) and/or photometric parallaxes derived from the pulsation period--luminosity relation of long period variable stars hosting the maser sources.

astro-ph.GA↗

arXiv2025

Serial MultiView: an efficient approach to mitigating atmospheric spatial-structure errors for VLBI astrometry

Atmospheric propagation errors are a main constraint on the accuracy of Very Long Baseline Interferometry (VLBI) astrometry. For relative astrometry, differential techniques can mitigate these errors, but their effectiveness diminishes with decreasing elevation and increasing angular separations between target and calibrator, among others. The MultiView technique addresses atmospheric spatial-structure errors by observing multiple calibrators around the target and interpolating at the target position, thereby reducing atmospheric errors more effectively than phase-referencing with only one calibrator. The first MultiView realisation at 1.6GHz involved cyclically observing all calibrators and the target, fitting a phase plane from calibrator solutions in each cycle, and is a well-established technique. This implementation reduces on-target time and is constricted by the short atmospheric coherence time at high frequencies. We propose a new realisation, serial MultiView, which rotates the phase plane iteratively based on the time series of calibrator residual phases. This new strategy obviates the necessity of observing all calibrators within each cycle, thereby shortening the observing cycle and offering considerable potential at higher frequencies where the temporal structure is the dominant source of errors. Additionally, by incorporating time-domain information in the iterations, phase ambiguities can be accurately and automatically identified. We verify the astrometric accuracy of serial MultiView at 5GHz by comparing it to conventional MultiView, achieving <10uas error in RA direction, and show the calibration overhead can be reduced in both approaches. This approach enables efficient, high-accuracy differential astrometry and artifact-reduced imaging for astrophysical studies, and we provide a user-friendly tool for it.

astro-ph.IM↗

arXiv2025

Optimising the Processing and Storage of Visibilities using lossy compression

The next-generation radio astronomy instruments are providing a massive increase in sensitivity and coverage, through increased stations in the array and frequency span. Two primary problems encountered when processing the resultant avalanche of data are the need for abundant storage and I/O. An example of this is the data deluge expected from the SKA Telescopes of more than 60PB per day, all to be stored on the buffer filesystem. Compressing the data is an obvious solution. We used MGARD, an error-controlled compressor, and applied it to simulated and real visibility data, in noise-free and noise-dominated regimes. As the data has an implicit error level in the system temperature, using an error bound in compression provides a natural metric for compression. Measuring the degradation of images reconstructed using the lossy compressed data, we explore the trade-off between these error bounds and the corresponding compression ratios, as well as the impact on science quality derived from the lossy compressed data products through a series of experiments. We studied the global and local impacts on the output images. We found relative error bounds of as much as $10\%$, which provide compression ratios of about 20, have a limited impact on the continuum imaging as the increased noise is less than the image RMS. For extremely sensitive observations and for very precious data, we would recommend a $0.1\%$ error bound with compression ratios of about 4. These have noise impacts two orders of magnitude less than the image RMS levels. At these levels, the limits are due to instabilities in the deconvolution methods. We compared the results to the alternative compression tool DYSCO, in both the impacts on the images and in the relative flexibility. MGARD provides better compression for similar error bounds, and has a host of potentially powerful additional features.

astro-ph.IM↗

arXiv2023

Inverse MultiView II: Microarcsecond Trigonometric Parallaxes for Southern Hemisphere 6.7~GHz Methanol Masers G232.62+00.99 and G323.74$-$00.26

We present the first results from the Southern Hemisphere Parallax Interferometric Radio Astrometry Legacy Survey (\spirals): $10μ$as-accurate parallaxes and proper motions for two southern hemisphere 6.7 GHz methanol masers obtained using the inverse MultiView calibration method. Using an array of radio telescopes in Australia and New Zealand, we measured the trigonometric parallax and proper motions for the masers associated with the star formation region G232.62+00.99 of $π= 0.610\pm0.011$~mas, $μ_x=-2.266\pm0.021$~mas~y$^{-1}$ and $μ_y=2.249\pm0.049$~mas~y$^{-1}$, which implies its distance to be $d=1.637\pm0.029$~kpc. These measurements represent an improvement in accuracy by more than a factor of 3 over the previous measurements obtained through Very Long Baseline Array observations of the 12~GHz methanol masers associated with this region. We also measure the trigonometric parallax and proper motion for G323.74--00.26 as $π= 0.364\pm0.009$~mas, $μ_x=-3.239\pm0.025$~mas~y$^{-1}$ and $μ_y=-3.976\pm0.039$~mas~y$^{-1}$, which implies a distance of $d=2.747\pm0.068$~kpc. These are the most accurate measurements of trigonometric parallax obtained for 6.7~GHz class II methanol masers to date. We confirm that G232.62+00.99 is in the Local arm and find that G323.74--00.26 is in the Scutum-Centaurus arm. We also investigate the structure and internal dynamics of both masers.

astro-ph.GA↗

arXiv2023

Inverse Multview I: Multi-Calibrator inverse phase referencing for Microarcsecond VLBI Astrometry

Very Long Baseline Interferometry (VLBI) astrometry is a well established technique for achieving $\pm10~μ$as parallax accuracies at frequencies well above 10~GHz. At lower frequencies, uncompensated interferometer delays associated with the ionosphere play the dominant role in limiting the astrometric accuracy. Multiview is a novel VLBI calibration method, which uses observations of multiple quasars to accurately model and remove time-variable, directional-dependent changes to the interferometer delay. Here we extend the Multiview technique by phase referencing data to the target source ("inverse Multiview") and test its performance. Multiple observations with a four-antenna VLBI array operating at 8.3~GHz show single-epoch astrometric accuracies near $20~μ$as for target-reference quasar separations up to about 7 degrees. This represents an improvement in astrometric accuracy by up to an order of magnitude compared to standard phase referencing.

astro-ph.IM↗

arXiv2022

Feed rotation corrections for antennas having beam waveguide mounts

We report on the development of new code to support the beam waveguide antenna mount types in AIPS, which will allow polarisation analysis of observations made using these antennas. Beam Wave-guide antennas in VLBI are common in communication antennas that have been repurposed (e.g. Warkworth, Yamaguchi). The mount type affects the differential phase between the left and the right hand circular polarisations (LHC and RHC) for different points on the sky. We demonstrate that the corrections for the Warkworth beam wave guide antenna can be applied.

astro-ph.IM↗

arXiv2022

The Astrometric Animation of Water Masers towards the Mira Variable BX Cam

We report VLBI monitoring observations of the 22 GHz water (H$_{2}$O) masers around the Mira variable BX Cam, which were carried out as a part of the EAVN Synthesis of Stellar Maser Animations (ESTEMA) project. Data of 37 epochs in total were obtained from 2018 May to 2021 June with a time interval of 3-4 weeks, spanning approximately three stellar pulsation periods ($P= \sim$440 d). In particular, the dual-beam system equipped on the VERA stations was used to measure the kinematics and parallaxes of the H$_{2}$O maser features. The measured parallax, $π=1.79\pm 0.08$ mas, is consistent with $Gaia$ EDR3 and previously measured VLBI parallaxes within a 1-$σ$ error level. The position of the central star was estimated, based on both the $Gaia$ EDR3 data and the center position of the ring-like 43 GHz silicon-monoxide (SiO) maser distribution imaged with the KVN. The three-dimensional H$_{2}$O maser kinematics indicates that the circumstellar envelope is expanding at a velocity of $13\pm4$ km s$^{-1}$, while there are asymmetries in both the spatial and velocity distributions of the maser features. Furthermore, the H$_{2}$O maser animation achieved by our dense monitoring program manifests the propagation of shock waves in the circumstellar envelope of BX Cam.

astro-ph.SR↗

arXiv2018

MultiView phase corrections at low frequencies for precise astrometry

We present a multi-calibrator solution, i.e. MultiView, to achieve accurate astrometry on the level of the thermal noise at low VLBI frequencies dominated by ionospheric residuals. We demonstrate on L-band VLBA observations how MultiView provides superior astrometry to conventional phase referencing techniques (Rioja et al. 2017). We also introduce a new trial method to detect antenna based systematic errors in the observations (Orosz et al. 2017}. All presented methods and results are based on our recent papers (Orosz et al. 2017; Rioja et al. 2017).

astro-ph.IM↗

arXiv2016

MultiView High Precision VLBI Astrometry at Low Frequencies

The arrival of the Square Kilometer Array (SKA) will revitalise all aspects of Very Long Baseline Interferometry (VLBI) astronomy at the lower frequencies. In the last decade there have been huge strides towards routinely achieving high precision VLBI astrometry at frequencies dominated by the tropospheric contributions, most notably at 22GHz, using advanced phase referencing techniques. Nevertheless to increase the capability for high precision astrometric measurements at low radio frequencies (<8GHz) an effective calibration strategy of the systematic ionospheric propagation effects that is widely applicable is required. Observations at low frequencies are dominated by distinct direction dependent ionospheric propagation errors, which place a very tight limit on the angular separation of a suitable phase referencing calibrator. The MultiView technique holds the key to the compensation of atmospheric spatial-structure errors, by using observations of multiple calibrators and 2-D interpolation. In this paper we present the first demonstration of the power of MultiView using three calibrators, several degrees from the target, along with a comparative study of the astrometric accuracy between MultiView and phase-referencing techniques. MultiView calibration provides an order of magnitude improvement in astrometry with respect to conventional phase referencing, achieving ca. 100 micro-arcseconds astrometry errors in a single epoch of observations, effectively reaching the thermal noise limit. MultiView will achieve its full potential with the enhanced sensitivity and multibeam capabilities of SKA and the pathfinders, which will enable simultaneous observations of the target and calibrators. Our demonstration indicates that the 10 micro-arcseconds goal of astrometry at ~1.6GHz using VLBI with SKA is feasible using the MultiView technique.

astro-ph.IM↗

arXiv2015

The Power of Simultaneous Multi-Frequency Observations for mm-VLBI: Astrometry up to 130 GHz with the KVN

Simultaneous observations at multiple frequency bands have the potential to overcome the fundamental limitation imposed by the atmospheric propagation in mm-VLBI observations. The propagation effects place a severe limit in the sensitivity achievable in mm-VLBI, reducing the time over which the signals can be coherently combined, and preventing the use of phase referencing and astrometric measurements. We carried out simultaneous observations at 22, 43, 87 and 130 GHz of a group of five AGNs, the weakest of which is ca. 200 mJy at 130 GHz, with angular separations ranging from 3.6 to 11 degrees, using the KVN. We analysed this data using the Frequency Phase Transfer (FPT) and the Source Frequency Phase Referencing (SFPR) techniques, which use the observations at a lower frequency to correct those at a higher frequency. The results of the analysis provide an empirical demonstration of the increase in the coherence times at 130 GHz from a few tens of seconds to about twenty minutes, with FPT, and up to many hours with SFPR. Moreover the astrometric analysis provides high precision relative position measurements between two frequencies, including, for the first time, astrometry at 130 GHz. Finally we demonstrate a method for the generalised decomposition of the relative position measurements into absolute position shifts for bona fide astrometric registration of the maps of the individual sources at multiple frequencies, up to 130 GHz.

astro-ph.IM↗

arXiv2011

High Precision Astrometric Millimeter VLBI Using a New Method for Atmospheric Calibration

We describe a new method which achieves high precision Very Long Baseline Interferometry (VLBI) astrometry in observations at millimeter wavelengths. It combines fast frequency-switching observations, to correct for the dominant non-dispersive tropospheric fluctuations, with slow source-switching observations, for the remaining ionospheric dispersive terms. We call this method Source-Frequency Phase Referencing. Provided that the switching cycles match the properties of the propagation media, one can recover the source astrometry. We present an analytic description of the two-step calibration strategy, along with an error analysis to characterize its performance. Also, we provide observational demonstrations of a successful application with observations using the Very Long Baseline Array at 86 GHz of the pairs of sources 3C274 & 3C273 and 1308+326 & 1308+328, under various conditions. We conclude that this method is widely applicable to millimeter VLBI observations of many target sources, and unique in providing bona-fide astrometrically registered images and high precision relative astrometric measurements in mm-VLBI using existing and newly built instruments.

astro-ph.IM↗

arXiv2009

VLBA Scientific Memorandum n. 31: Astrometric calibration of mm-VLBI using "Source/Frequency Phase Referenced" observations

In this document we layout a new method to achieve "bona fide" high precision Very-Long-Baseline-Interferometry (VLBI) astrometric measurements of frequency-dependent positions of celestial sources (even) in the high (mm-wavelength) frequency range, where conventional phase referencing techniques fail. Our method, dubbed "Source/Frequency Phase Referencing" (SFPR) combines fast frequency-switching (or dual-frequency observations) with the source switching of conventional phase referencing techniques. The former is used to calibrate the dominant highly unpredictable rapid atmospheric fluctuations, which arise from variations of the water vapor content in the troposphere, and ultimately limit the application of conventional phase referencing techniques; the latter compensates the slower time scale remaining ionospheric/instrumental, non-negligible, phase variations. For cm-VLBI, the SFPR method is equivalent to conventional phase referencing applied to the measurement of frequency-dependent source positions changes ("core-shifts"). For mm-VLBI, the SFPR method stands as the only approach which will provide astrometry. In this memo we layout the scope and basis of our new method, along with a description of the strategy and a successful demonstration of the application of this new astrometric analysis technique to the highest frequency VLBA observations, at 86 GHz. Our previous comparative astrometric analysis of cm-VLBI observations, presented elsewhere, produced equivalent results using both methods.

astro-ph.IM↗

arXiv2009

VLBA Scientific Memorandum n. 32 - Multi-frequency Astrometry with VSOP-2: An application of Source/Frequency Phase Referencing techniques

This document describes the advantages of applying "Source/Frequency Phase Referencing" (SFPR) techniques to the analysis of VLBI observations with VSOP-2, for high precision astrometric measurements and/or increased sensitivity. The SFPR calibration technique basics and a demonstration of the method applied to highest frequency VLBA observations are described in detail in VLBA Scientific Memo n. 31. Here we outline its importance in the context of space VLBI astrometry with VSOP-2, where errors in the satellite orbit determination and rapid tropospheric phase fluctuations set extreme challenges for the successful application of conventional phase referencing techniques, specially at the higher frequencies. SFPR is ideally suited for full calibration of those - regardless of the orbit determination accuracy - and, in general, of any non-dispersive terms. The requirements for application of SFPR techniques are fully compatible with current technical specifications of VSOP-2. Hence we foresee that SFPR will play an important role in helping expanding the scientific outcome of the space VLBI mission.

astro-ph.IM↗

arXiv2005

Measurement of core-shifts with astrometric multi-frequency calibration

VLBI is unique, among the space geodetic techniques, in its contribution to defining and maintaining the International Celestial Reference Frame, providing precise measurements of coordinates of extragalactic radiosources. The quest for increasing accuracy of VLBI geodetic products has lead to a deeper revision of all aspects that might introduce errors in the analysis. The departure of the observed sources from perfect, stable, compact and achromatic celestial targets falls within this category. This paper is concerned with the impact of unaccounted frequency-dependent position shifts of source cores in the analysis of dual-band S/X VLBI geodesy observations, and proposes a new method to measure them. The multi-frequency phase transfer technique developed and demonstrated by Middelberg et al. (2005) increases the high frequency coherence times of VLBI observations, using the observations at a lower frequency. Our proposed SOURCE/FREQUENCY PHASE REFERENCING method endows it with astrometric applications by adding a strategy to estimate the ionospheric contributions. Here we report on the first successful application to measure the core shift of the quasar 1038+528 A at S and X-bands, and validate the results by comparison with those from standard phase referencing techniques. In this particular case, and in general in the cm-wavelength regime, both methods are equivalent. Moreover the proposed method opens a new horizon with targets and fields suitable for high precision astrometric studies with VLBI, especially at high frequencies where severe limitations imposed by the rapid fluctuations in the troposphere prevent the use of standard phase referencing techniques.

astro-ph↗

arXiv2000

A phase-reference study of the quasar pair 1038+528A,B

We present results from 3.6 cm observations of the quasar pair 1038+528 A and B, made in 1995 using the VLBA together with the Effelsberg 100m telescope. We describe the use of a phase-referencing technique to measure the astrometric separation between the quasars. We also introduce a new data analysis method -"hybrid double mapping"- which preserves the relative astrometric information in a single VLBI hybrid map for close source pairs. We combine our measurements with those from three previous epochs, the earliest in 1981. Our new observations confirm the evolution within the structure of quasar B, previously proposed to explain the measured change in the relative separation of the pair. Our upper bound for any systematic proper motion between the mass centres of quasars A and B is 10 micro-arcsec/year. This is set by the limited precision in defining the reference points in the quasars at different epochs and by possible instabilities of the source "core" locations. A separate analysis enables us to put more stringent upper limits to any core motions along the two source axes.

astro-ph↗