arXiv subjects

Maria Saladina

Publications and source records attributed to Maria Saladina.

10 recordsLinked to original sources

arXiv2026

Rethinking Charge Transport and Recombination in Donor-diluted Organic Solar Cells

We systematically investigate PM6:Y12 bulk-heterojunction solar cells with donor fractions ranging from 1% to 45%, linking morphology, charge transport, and recombination to device performance. Complementary structural and spectroscopic methods reveal that a percolating PM6 network forms even at below 5% donor content, with lamellar stacking and vertical composition gradients that do not hinder the charge extraction. The reduction of the effective active layer conductivity towards low donor fractions obeys a three-dimensional percolation model, indicating that charge transport is governed by network topology rather without a pronounced percolation threshold. A transition from nongeminate Langevin recombination to a dispersive Smoluchowski-type loss occurs below 5% donor fraction. The latter regime is also nongeminate, i.e., pertains to recombination of the total charge carrier density. Correspondingly, we observe that the Langevin reduction in the higher donor fractions - mostly dominated by redissociation of electron-hole pairs after encounter - changes towards low donor fractions: in these cases, the nongeminate loss rate exceeds the prediction of the Langevin model. This regime coincides with increasing transport resistance due to topology-limited hole conduction, leading to reduced fill factors despite a high retained charge-generation efficiency. Our results demonstrate that strong donor dilution preserves photogeneration if a continuous donor network is maintained, and unveil how topology-controlled transport and non-Langevin recombination jointly define the performance limits of donor-diluted organic solar blends.

cond-mat.mtrl-sci↗

arXiv2026

Bridging the lab-to-fab gap in non-fullerene organic solar cells via gravure printing

Organic solar cells have reached record efficiencies with non-fullerene acceptors, yet their translation to industrial printing remains a critical bottleneck. Here we report the highest efficiency achieved for a fully roll-to-roll-compatible gravure-printed non-fullerene organic solar cell. High-performance blends are typically optimised under laboratory coating conditions, while roll-to-roll manufacturing imposes fundamentally different constraints on ink stability, drying dynamics, and multilayer integration. Whether these constraints intrinsically limit device physics has remained unresolved. Here, we demonstrate a gravure-printed PM6:Y12 solar cell architecture using commercially available materials and establish a quantitative framework that disentangles optical, recombination, and transport losses in printed devices. We find that favourable bulk morphology and exciton harvesting can be preserved under gravure printing and non-halogenated solvents. The dominant efficiency penalties arise instead from optical interference within the printed layer stack and slow charge transport. Our results demonstrate that the performance gap between laboratory and printed solar cells is originating from device architecture rather than the intrinsic physics of modern non-fullerene systems, providing a mechanistic roadmap for roll-to-roll manufacturing of non-fullerene solar cells.

cond-mat.mtrl-sci↗

arXiv2025

The contribution of electron and hole conductivity to the transport loss in organic solar cells

The effective conductivity determines the reciprocal of the transport resistance, the dominant loss of fill factor in organic solar cells. We experimentally determine the dependence of effective conductivity on its electron and hole contributions. Using PM6:Y12 blends with tunable morphological and energetic disorder, we show that the effective conductivity follows a harmonic mean of electron and hole conductivities even across nearly three orders of magnitude in conductivity imbalance. We also validate the method for directly extracting effective conductivity from current-voltage measurements, eliminating the need to rely on indirect mobility and charge carrier density-based proxies. Our findings challenge the widespread use of geometric mean approximations and offer a more accurate framework for analysing and modelling transport in disordered organic semiconductors.

cond-mat.mtrl-sci↗

arXiv2025

A Framework to Pinpoint Bottlenecks in Emerging Solar Cells and Disordered Devices via Differential Machine Learning

A key challenge in the development of materials for the next generation of solar cells, sensors and transistors is linking macroscopic device performance to underlying microscopic properties. For years, fabrication of devices has been faster than our ability to characterize them. This has led to a random walk of material development, with new materials being proposed faster than our understanding. We present two neural network-based methods for extracting key material parameters, including charge carrier mobility and trap state density, in optoelectronic devices such as solar cells. Our methods require solely measured light current--voltage curve and modest computational resources, making our approach applicable in even minimally equipped laboratories. Unlike traditional machine learning models, our methods place the final material values in a non-Gaussian likelihood distribution, allowing confidence assessment of each predicted parameter. We demonstrate these techniques using fresh PM6:Y12 and degraded PM6:BTP-eC9 organic solar cells.

physics.app-ph↗

arXiv2024

Transport resistance dominates the fill factor losses in record organic solar cells

Organic photovoltaics are a promising solar cell technology well-suited to mass production using roll-to-roll processes. The efficiency of lab-scale solar cells has exceeded 20% and considerable attention is currently being given to understanding and minimising the remaining loss mechanisms preventing higher efficiencies. While recent efficiency improvements are partly owed to reducing non-radiative recombination losses at open-circuit, the low fill factor due to a significant transport resistance is becoming the Achilles heel of organic photovoltaics. The term transport resistance refers to a voltage and light intensity dependent charge collection loss in low-mobility materials. In this Perspective, we demonstrate that even the highest efficiency organic solar cells reported to-date have significant performance losses that can be attributed to transport resistance and that lead to high fill factor losses. We provide a closer look at the transport resistance and the material properties influencing it. We describe how to experimentally characterise and quantify the transport resistance by providing easy to follow instructions. Furthermore, the causes and theory behind transport resistance are detailed. In particular, we integrate the relevant figures of merit and different viewpoints on the transport resistance. Finally, we outline strategies that can be followed to minimise these charge collection losses in future solar cells.

cond-mat.mtrl-sci↗

arXiv2024

Transport resistance strikes back: unveiling its impact on fill factor losses in organic solar cells

The fill factor (FF) is a critical parameter for solar cell efficiency, but its analytical description is challenging due to the interplay between recombination and charge extraction processes. An often overlooked yet significant factor contributing to FF losses, beyond recombination, is the influence of charge transport. In most state-of-the-art organic solar cells, the primary limitations of the FF arise not just from non-radiative recombination but also from low conductivity. A closer look reveals that even in the highest efficiency cells, performance losses due to transport resistance are significant, highlighting the need for refined models to predict the FF accurately. Here, we extend the analytical model for transport resistance to a more general case. Drawing from a large set of experimental current-voltage and light intensity-dependent open-circuit voltage data, we systematically incorporate crucial details previously omitted in the model. Consequently, we introduce a straightforward set of equations to predict the FF of a solar cell, enabling the differentiation of losses attributed to recombination and transport resistance. Our study provides valuable insights into strategies for mitigating FF losses based on the experimentally validated analytical model, guiding the development of more efficient solar cell designs and optimisation strategies.

cond-mat.mtrl-sci↗

arXiv2022

Power-law density of states in organic solar cells revealed by the open-circuit voltage dependence of the ideality factor

The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ measurements, we find that gaussian and exponential distributions describe the DOS only at a given quasi-Fermi level splitting. The DOS width increases linearly with the DOS depth, revealing the power-law DOS in these materials.

physics.app-ph↗

arXiv2022

Traps and transport resistance: the next frontier for stable state-of-the-art non-fullerene acceptor solar cells

Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits open-circuit voltage and lowers charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC.

cond-mat.mtrl-sci↗

arXiv2021

Charge Photogeneration in Non-Fullerene Organic Solar Cells: Influence of Excess Energy and Electrostatic Interactions

In organic solar cells, photogenerated singlet excitons form charge transfer (CT) complexes, which subsequently split into free charge carriers. Here, we consider the contributions of excess energy and molecular quadrupole moments to the charge separation process. We investigate charge photogeneration in two separate bulk heterojunction systems consisting of the polymer donor PTB7-Th and two non-fullerene acceptors, ITIC and h-ITIC. CT state dissociation in these donor-acceptor systems is monitored by charge density decay dynamics obtained from transient absorption experiments. We study the electric field dependence of charge carrier generation at different excitation energies by time delayed collection field (TDCF) and sensitive steady-state photocurrent measurements. Upon excitation below the optical gap free charge carrier generation becomes less field dependent with increasing photon energy, which challenges the view of charge photogeneration proceeding through energetically lowest CT states. We determine the average distance between electron-hole pairs at the donor-acceptor interface from empirical fits to the TDCF data. The delocalisation of CT states is larger in PTB7-Th:ITIC, the system with larger molecular quadrupole moment, indicating the sizeable effect of the electrostatic potential at the donor-acceptor interface on the dissociation of CT complexes.

cond-mat.mtrl-sci↗

arXiv2021

Temperature dependent charge transfer state absorption and emission reveal dominant role of dynamic disorder in organic solar cells

The energetic landscape of charge transfer (CT) states at the interface of electron donating and electron accepting domains in organic optoelectronic devices is crucial for their performance. Central questions -- such as the role of static energetic disorder and vibrational effects -- are under ongoing dispute. This study provides an in-depth analysis of temperature dependent broadening of the spectroscopic absorption and emission features of CT states in devices with small molecule-fullerene blends. We confirm the validity of the electro-optical reciprocity relation between the photovoltaic external quantum efficiency ($\mathrm{EQE_{PV}}$) and electroluminescence ($\mathrm{EQE_{EL}}$), enabling us to validate the device temperature during the experiment. The validated temperature allows us to fit our experimental data with several models, and compare extracted CT state energies with the corresponding open circuit voltage limit at $0\mathrm{\,K}$. Our findings unveil that the absorption and emission characteristics are usually not symmetric, and dominated by temperature-activated broadening (vibrational) effects instead of static disorder.

physics.app-ph↗