arXiv subjects

Maria Vallet-Regi

Publications and source records attributed to Maria Vallet-Regi.

At least 19 recordsLinked to original sources

arXiv2021

A versatile multicomponent mesoporous silica nanosystem with dual antimicrobial and osteogenic effects

In this manuscript, we propose a simple and versatile methodology to design nanosystems based on biocompatible and multicomponent mesoporous silica nanoparticles (MSNs) for infection management. This strategy relies on the combination of antibiotic molecules and antimicrobial metal ions into the same nanosystem, affording a significant improvement of the antibiofilm effect compared to that of nanosystems carrying only one of these agents. The multicomponent nanosystem is based on MSNs externally functionalized with a polyamine dendrimer (MSN-G3) that favors internalization inside the bacteria and allows the complexation of multiactive metal ions (MSN-G3-Mn+). Importantly, the selection of both the antibiotic and the cation may be done depending on clinical needs. Herein, levofloxacin and Zn2+ ion, chosen owing to both its antimicrobial and osteogenic capability, have been incorporated. This dual biological role of Zn2+ could have and adjuvant effect thought destroying the biofilm in combination with the antibiotic as well as aid to the repair and regeneration of lost bone tissue associated to osteolysis during infection process. The versatility of the nanosystem has been demonstrated incorporating Ag+ ions in a reference nanosystem. In vitro antimicrobial assays in planktonic and biofilm state show a high antimicrobial efficacy due to the combined action of levofloxacin and Zn2+, achieving an antimicrobial efficacy above 99% compared to the MSNs containing only one of the microbicide agents. In vitro cell cultures with MC3T3-E1 preosteoblasts reveal the osteogenic capability of the nanosystem, showing a positive effect on osteoblastic differentiation while preserving the cell viability.

q-bio.TO↗

arXiv2021

Effective reduction of biofilm through photothermal therapy by gold core@shell based mesoporous silica nanoparticles

Bacterial biofilms can initiate chronic infections that become difficult to eradicate. There is an unmet need for effective therapeutic strategies that control and inhibit the growth of these biofilms. Herein, light sensitive mesoporous silica nanoparticles (MSNs) with photothermal (PTT) and antimicrobial combined capabilities have been developed. These nanosystems have high therapeutic potential to affect the bacterial biofilm architecture and subsequently inhibit its growth. Nucleation of gold nanorods followed by the growth of a silica shell leads to a core@shell design (AuNR@MSN) with PTT properties. Incorporation of nitrosothiol groups (-SNO) with a heat liable linker, enables an enhanced nitric oxide release upon photothermal stimulation with near infrared radiation. Further loading of an antimicrobial molecule such as the levofloxacin (LEVO) antibiotic creates a unique nanoassembly with potential therapeutic efficacy against Staphylococcus aureus bacterial biofilms. A dispersion rate of the bacterial biofilm was evident when light stimuli is applied because impregnation of the nitrosothiol functionalized nanosystem with the antibiotic LEVO led to ca. 30% reduction but its illumination with near infrared (NIR) irradiation showed a biofilm reduction of ca. 90%, indicating that localized antimicrobial exposure and PTT improves the therapeutic efficacy. These findings envision the conception of near-infraredactivated nanoparticle carriers capable of combined therapy upon NIR irradiation, which enables photothermal therapy, together with the release of levofloxacin and nitric oxide to disrupt the integrity of bacterial biofilms and achieve a potent antimicrobial therapy.

q-bio.TO↗

arXiv2021

Mesoporous core-shell silica nanoparticles with anti-fouling properties for ovarian cancer therapy

Mesoporous silica nanoparticles (MSNPs) have many potential applications in biomedical fields. However, when MSNPs are exposed to plasma, protein adsorption leads to opsonization and decreases blood circulation time. A new multifunctional nanodevice based on polyethylenimine (PEI) coated core-shell Fe3O4@SiO2 MSNPs with a zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) surface was designed to minimize unspecific protein adhesion. Particle size measurements demonstrated an excellent non-fouling capacity in solutions containing Bovine Serum Albumin (BSA) and Fetal Bovine Serum (FBS) plasma proteins. The system was used in this study to co-deliver two different cargos: siRNA and daunorubicin. Anti-TWIST siRNA plays critical role in modulating knockdown of TWIST and sensitizing cells to chemotherapeutics such as daunorubicin for ovarian cancer therapy. The drug was released in response to externally controlled oscillating magnetic fields (OMF). siRNA (siGFP) silenced expression of green fluorescence protein (GFP) in Ovcar8 cancer cells, demonstrating the incorporation of core shell MSNPs into cells and siGFP delivery. The synergistic effect of the co-release of anti-TWIST-siRNA loaded in the PEI and daunorubicin loaded in NPs pores c aused increased cytotoxicity in Ovcar8 of up to 50% from both zwitteronic and non-zwitteronic NPs. The system is the first example of silencing by anti-TWITS-siRNA /daunorubicin co-delivered using zwitterionic core-shell nanoparticles with low-fouling adsorption. This engineered multifunctional approach may provide therapeutic potential for the treatment of currently incurable ovarian cancer.

q-bio.TO↗

arXiv2021

Strontium-releasing mesoporous bioactive glasses with anti-adhesive zwitterionic surface as advanced biomaterials for bone tissue regeneration

Hypothesis The treatment of bone fractures still represents a challenging clinical issue when complications due to impaired bone remodelling (i.e. osteoporosis) or infections occur. These clinical needs still require a radical improvement of the existing therapeutic approach through the design of advanced biomaterials combining the ability to promote bone regeneration with anti-fouling/anti-adhesive properties able to minimise unspecific biomolecules adsorption and bacterial adhesion. Strontium-containing mesoporous bioactive glasses (Sr-MBG), able to exert a pro-osteogenic effect by releasing Sr2+ ions, have been successfully functionalised to provide mixed-charge surface groups with low-fouling abilities. Experiments Sr-MBG have been post-synthesis modified by co-grafting hydrolysable short chain silanes containing amino (aminopropylsilanetriol) and carboxylate (carboxyethylsilanetriol) moieties to achieve a zwitterionic zero-charge surface and then characterised in terms of textural-structural properties, bioactivity, cytotoxicity, pro-osteogenic and low-fouling capabilities. Findings After zwitterionization the in vitro bioactivity is maintained, as well as the ability to release Sr2+ ions capable to induce a mineralization process. Irrespective of their size, Sr-MBG particles did not exhibit any cytotoxicity in pre-osteoblastic MC3T3-E1 up to the concentration of 75 ug/mL. Finally, the zwitterionic Sr-MBGs show a significant reduction of serum protein adhesion with respect to pristine ones. These results open promising future expectations in the design of nanosystems combining pro-osteogenic and anti-adhesive properties.

q-bio.TO↗

arXiv2021

Induction of VEGF secretion from bone marrow stromal cell line (ST-2) by the dissolution products of mesoporous silica glass particles containing CuO and SrO

Certain biomaterials are capable of inducing the secretion of Vascular Endothelial Growth Factor (VEGF) from cells exposed to their biochemical influence, which plays a vital role in stimulating angiogenesis. Looking for this capacity, in this study three porous glasses were synthesized and characterized. The objective of this study was to determine the concentration of the glass particles that, being out of the cytotoxic range, could increase VEGF secretion. The viability of cultivated bone marrow stromal cells (ST-2) was assessed. The samples were examined with light microscopy (LM) after the histochemical staining for haematoxylin and eosin (HE). The biological activity of glasses was evaluated in terms of the influence of the Cu2+ and Sr2+ ions on the cells. The dissolution products of CuSr-1 and CuSr-2.5 produced the highest secretion of VEGF from ST-2 cells after 48 h of incubation. The combination of Cu2+ and Sr2+ lays the foundation for engineering a bioactive glass than can lead to vascularized, functional bone tissue when used in bone regeneration applications.

q-bio.TO↗

arXiv2021

Mixed-charge pseudo-zwitterionic mesoporous silica nanoparticles with lowfouling and reduced cell uptake properties

The design of drug delivery systems needs to consider biocompatibility and host body recognition for an adequate actuation. In this work, mesoporous silica nanoparticles (MSNs) surfaces were successfully modified with two silane molecules to provide mixed-charge brushes (-NH3/-PO3) and well evaluated in terms of surface properties, low-fouling capability and cell uptake in comparison to PEGylated MSNs. The modification process consists in the simultaneous direct-grafting of hydrolysable short chain amino (aminopropyl silanetriol, APST) and phosphonate-based (trihydroxy-silyl-propyl-methyl-phosphonate, THSPMP) silane molecules able to provide a pseudo-zwitterionic nature under physiological pH conditions. Results confirmed that both mixed-charged pseudo-zwitterionic MSNs (ZMSN) and PEG-MSN display a significant reduction of serum protein adhesion and macrophages uptake with respect to pristine MSNs. In the case of ZMSNs, his reduction is up to a 70-90% for protein adsorption and c.a. 60% for cellular uptake. This pseudo-zwitterionic modification has been focused on the aim of local treatment of bacterial infections through the synergistic effect between the capability of the nanocarriers to transport and deliver specific drugs and the electrostatic interactions between the mixed-charge systems and bacteria. These findings open promising future expectations for the effective treatment of bacterial infections through the use mixed-charge pseudo-zwitterionic MSNs furtive to macrophages and with antimicrobial properties.

q-bio.TO↗

arXiv2021

Mesoporous Silica Nanoparticles Decorated with Polycationic Dendrimers for Infection Treatment

This work aims to provide an effective and novel solution for the treatment of infection by using nanovehicles loaded with antibiotics capable of penetrating the bacterial wall, thus increasing the antimicrobial effectiveness. These nanosystems, named "nanoantibiotics", are composed of mesoporous silica nanoparticles (MSNs), which act as nanocarriers of an antimicrobial agent (levofloxacin, LEVO) localized inside the mesopores. To provide the nanosystem of bacterial membrane interaction capability, a polycationic dendrimer, concretely the poly(propyleneimine) dendrimer of third generation (G3), was covalently grafted to the external surface of the LEVO-loaded MSNs. After physicochemical characterization of this nanoantibiotic, the release kinetics of LEVO and the antimicrobial efficacy of each released dosage were evaluated. Besides, internalization studies of the MSNs functionalized with the G3 dendrimer were carried out, showing a high penetrability throughout Gram-negative bacterial membranes. This work evidences that the synergistic combination of polycationic dendrimers as bacterial membrane permeabilization agents with LEVO-loaded MSNs triggers an efficient antimicrobial effect on Gram-negative bacterial biofilm. These positive results open up very promising expectations for their potential application in new infection therapies.

q-bio.TO↗

arXiv2021

Mesoporous silica nanoparticles containing silver as novel antimycobacterial agents against Mycobacterium tuberculosis

Tuberculosis remains today a major public health issue with a total of 9 million new cases and 2 million deaths annually. The lack of an effective vaccine and the increasing emergence of new strains of Mycobacterium tuberculosis (Mtb) highly resistant to antibiotics, anticipate a complicated scenario in the near future. The use of nanoparticles features as an alternative to antibiotics in tackling this problem due to their potential effectiveness in resistant bacterial strains. In this context, silver nanoparticles have demonstrated high bactericidal efficacy, although their use is limited by their relatively high toxicity, which calls for the design of nanocarriers that allow silver based nanoparticles to be safely delivered to the target cells or tissues. In this work mesoporous silica nanoparticles are used as carriers of silver based nanoparticles as antimycobacterial agent against Mtb. Two different synthetic approaches have been used to afford, on the one hand, a 2D hexagonal mesoporous silica nanosystem which contains silver bromide nanoparticles distributed all through the silica network and, on the other hand, a core@shell nanosystem with metallic silver nanoparticles as core and mesoporous silica shell in a radial mesoporous rearrangement. Both materials have demonstrated good antimycobacterial capacity in in vitro test using Mtb, being lower the minimum inhibitory concentration for the nanosystem which contains silver bromide. Therefore, the interaction of this material with the mycobacterial cell has been studied by cryo-electron microscopy, establishing a direct connection between the antimycobactericidal effect observed and the damage induced in the cell envelope.

q-bio.QM↗

arXiv2021

Multiscale porosity in mesoporous bioglass 3D-printed scaffolds for bone regeneration

In order to increase the bone forming ability of MBG-PCL composite scaffold, microporosity was created in the struts of 3D-printed MBG-PCL scaffolds for the manufacturing of a construct with a multiscale porosity consisting of meso-, micro- and macro-pores. 3D-printing imparted macroporosity while the microporosity was created by porogen removal from the struts, and the MBG particles were responsible for the mesoporosity. The scaffolds were 3D-printed using a mixture of PCL, MBG and phosphate buffered saline (PBS) particles, subsequently leached out. Microporous-PCL (pPCL) as a negative control, microporous MBG-PCL (pMBG-PCL) and non-microporous-MBG-PCL (MBG-PCL) were investigated. Scanning electron microscopy, mercury intrusion porosimetry and micro-computed tomography demonstrated that the PBS removal resulted in the formation of micropores inside the struts with porosity of around 30% for both pPCL and pMBG-PCL, with both constructs displaying an overall porosity of 80-90%. In contrast, the MBG-PCL group had a microporosity of 6% and an overall porosity of 70%. Early mineralisation was found in the pMBG-PCL post-leaching out and this resulted in the formation a more homogeneous calcium phosphate layer when using a biomimetic mineralisation assay. Mechanical properties ranged from 5 to 25 MPa for microporous and non-microporous specimens, hence microporosity was the determining factor affecting compressive properties. MC3T3-E1 metabolic activity was increased in the pMBG-PCL along with an increased production of RUNX2. Therefore, the microporosity within a 3D-printed bioceramic composite construct may result in additional physical and biological benefits.

q-bio.TO↗

arXiv2021

Metabolomic response of osteosarcoma cells to nanographene oxide-mediated hyperthermia

Nanographene oxide (nGO)-mediated hyperthermia has been increasingly investigated as a localised, minimally invasive anticancer therapeutic approach. Near InfraRed (NIR) light irradiation for inducing hyperthermia is particularly attractive, because biological systems mostly lack chromophores that absorb in this spectral window, facilitating the selective heating and destruction of cells which have internalized the NIR absorbing-nanomaterials. However, little is known about biological effects accompanying nGO-mediated hyperthermiaat cellular and molecular levels.In this work, well-characterised pegylatednGOsheets with an hydrodynamic size of 300 nm were incubated with human Saos-2 osteosarcoma cells for 24h and their incorporation verified by flow cytometry and confocal microscopy. No effect on cell viability was observed after nGO incorporation by Saos-2 cells. However, a proliferation delay was observed due to the presence of nGO sheets in the cytoplasm.1H NMR metabolomicswas employed to screen for changes in the metabolic profile of cells, as this could help to improve understanding of celular responses to nanomaterials and provide new endpoint markers of effect.Cells incorporating nGO sheets showed noticeable changes in 10 metabolites compared to control cells, including decreased levels of several amino acids, taurine and creatine and increased levels of phosphocholine and uridine/adenosine nucleotides. After NIR irradiation, cells showed decreases in glutamate and uridine nulceotides, together with increases in glycerophosphocholine and adenosine monophosphate. Overall, this study has shown that the celular metabolome sensitively responded to nGO exposure and nGO-mediated hyperthermia and that NMR metabolomics is a powerful tool toinvestigate treatment responses.

q-bio.TO↗

arXiv2021

The effect of biomimetic mineralization of 3D-printed mesoporous bioglass scaffolds on physical properties and in vitro osteogenicity

Three-dimensional Mesoporous bioactive glasses (MBGs) scaffolds has been widely considered for bone regeneration purposes and additive manufacturing enables the fabrication of highly bioactive patient-specific constructs for bone defects. Commonly, this process is performed with the addition of polymeric binders that facilitate the printability of scaffolds. However, these additives cover the MBG particles resulting in the reduction of their osteogenic potential. The present work investigates a simple yet effective phosphate-buffered saline immersion method for achieving polyvinyl alcohol binder removal while enables the maintenance of the mesoporous structure of MBG 3D-printed scaffolds. This resulted in significantly modifying the surface of the scaffold via the spontaneous formation of a biomimetic mineralized layer which positively affected the physical and biological properties of the scaffold. The extensive surface remodeling induced by the deposition of the apatite-like layer lead to a 3-fold increase in surface area, a 5-fold increase in the roughness, and 4-fold increase in the hardness of the PBS-immersed scaffolds when compared to the as-printed counterpart. The biomimetic mineralization also occurred throughout the bulk of the scaffold connecting the MBGs particles and was responsible for the maintenance of structural integrity. In vitro assays using MC3T3-E1 pre-osteoblast like cells demonstrated a significant upregulation of osteogenic-related genes for the scaffolds previously immersed in PBS when compared to the as-printed PVA-containing scaffolds. Although the pre-immersion scaffolds performed equally towards osteogenic cell differentiation, our data suggest that a short immersion in PBS of MBG scaffolds is beneficial for the osteogenic properties and might accelerate bone formation after implantation.

q-bio.TO↗

arXiv2021

Fabrication of a nanoparticle-containing 3D porous bone scaffold with proangiogenic and antibacterial properties

3D porous scaffolds based on agarose and nanocrystalline apatite, two structural components that act as a temporary mineralized extracellular matrix, were prepared by the GELPOR3D method. This shaping technology allows the introduction of thermally-labile molecules within the scaffolds during the fabrication procedure. An angiogenic protein, Vascular Endothelial Growth Factor, and an antibiotic, cephalexin, loaded in mesoporous silica nanoparticles, were included to design multifunctional scaffolds for bone reconstruction. The dual release of both molecules showed a pro-angiogenic behaviour in chicken embryos grown ex ovo, while, at the same time providing an antibiotic local concentration capable of inhibiting Staphylococcus aureus bacterial growth. In this sense, different release patterns, monitored by UV-spectroscopy, could be tailored as a function of the cephalexin loading strategy. The scaffold surface was characterized by a high hydrophilicity, as determined by contact angle measurements, that facilitated the adhesion and proliferation of preosteoblastic cells.

q-bio.TO↗

arXiv2021

Suicide-Gene Transfection of Tumor-tropic Placental Stem Cells employing Ultrasound-Responsive Nanoparticles

A Trojan-horse strategy for cancer therapy employing tumor-tropic mesenchymal stem cells transfected with a non-viral nanovector is here presented. In this sense, ultrasound-responsive mesoporous silica nanoparticles were coated with a polycation (using two different molecular weights), providing them with gene transfection capabilities that were evaluated using two different plasmids. First, the expression of Green Fluorescent Protein was analyzed in Decidua-derived Mesenchymal Stem Cells after incubation with the silica nanoparticles. The most successful nanoparticle was then employed to induce the expression of two suicide genes: cytosine deaminase and uracil phosphoribosyl transferase, which allow the cells to convert a non-toxic pro-drug (5-fluorocytosine) into a toxic drug (5-Fluorouridine monophosphate). The effect of the production of the toxic final product was also evaluated in a cancer cell line (NMU cells) co-cultured with the transfected vehicle cells, Decidua-derived Mesenchymal Stem Cells.

q-bio.TO↗

arXiv2021

Nanoparticles for Multimodal Antivascular Therapeutics: Dual Drug Release, Photothermal and Photodynamic Therapy

The poor delivery of nanoparticles to target cancer cells hinders their success in the clinical setting. In this work, an alternative target readily available for circulating nanoparticles has been selected to eliminate the need for nanoparticle penetration in the tissue: the tumor blood vessels. A tumor endothelium-targeted nanoparticle (employing an RGD-containing peptide) capable of co-delivering two anti-vascular drugs (one anti-angiogenic drug and one vascular disruption agent) is here presented. Furthermore, the nanodevice presents two additional anti-vascular capabilities upon activation by Near-Infrared light: provoking local hyperthermia (by gold nanorods in the system) and generating toxic reactive oxygen species (by the presence of a photosensitizer). RGD-targeting is shown to increase uptake by HUVEC cells, and while the nanoparticles are shown not to be toxic for these cells, upon Near-Infrared irradiation their almost complete killing is achieved. The combination of all four therapeutic modalities is then evaluated in an ex ovo fibrosarcoma xenograft model, which shows a significant reduction in the number of blood vessels irrigating the xenografts when the nanoparticles are present, as well as the destruction of the existing blood vessels upon irradiation. These results suggest that the combination of different anti-vascular therapeutic strategies in a single nanocarrier appears promising and should be further explored in the future.

physics.bio-ph↗

arXiv2021

Incorporation and effects of mesoporous SiO2-CaO nanospheres loaded with ipriflavone on osteoblast/osteoclast cocultures

Mesoporous nanospheres in the system SiO2-CaO (NanoMBGs) with a hollow core surrounded by a radial arrangement of mesopores were characterized, labeled with FITC (FITC-NanoMBGs) and loaded with ipriflavone (NanoMBG-IPs) in order to evaluate their incorporation and their effects on both osteoblasts and osteoclasts simultaneously and maintaining the communication with each other in coculture. The influence of these nanospheres on macrophage polarization towards pro-inflammatory M1 or reparative M2 phenotypes was also evaluated in basal and stimulated conditions through the expression of CD80 (as M1 marker) and CD206 (as M2 marker) by flow cytometry and confocal microscopy. NanoMBGs did not induce the macrophage polarization towards the M1 pro-inflammatory phenotype, favoring the M2 reparative phenotype and increasing the macrophage response capability against stimuli as LPS and IL-4. NanoMBG-IPs induced a significant decrease of osteoclast proliferation and resorption activity after 7 days in coculture with osteoblasts, without affecting osteoblast proliferation and viability. Drug release test demonstrated that only a fraction of the payload is released by diffusion, whereas the rest of the drug remains within the hollow core after 7 days, thus ensuring the local long-term pharmacological treatment beyond the initial fast IP release. All these data ensure an appropriate immune response to these nanospheres and the potential application of NanoMBG-IPs as local drug delivery system in osteoporotic patients.

q-bio.TO↗

arXiv2021

Impact of the antibiotic-cargo from MSNs on Gram-positive and Gram-negative bacterial biofilms

Mesoporous silica nanoparticles (MSNs) are promising drug nanocarriers for infection treatment. Many investigations have focused on evaluating the capacity of MSNs to encapsulate antibiotics and release them in a controlled fashion. However, little attention has been paid to determine the antibiotic doses released from these nanosystems that are effective against biofilm during the entire release time. Herein, we report a systematic and quantitative study of the direct effect of the antibiotic-cargo released from MSNs on Gram-positive and Gram-negative bacterial biofilms. Levofloxacin (LVX), gentamicin (GM) and rifampin (RIF) were separately loaded into pure-silica and amino-modified MSNs. This accounts for the versatility of these nanosystems since they were able to load and release different antibiotic molecules of diverse chemical nature. Biological activity curves of the released antibiotic were determined for both bacterial strains, which allowed to calculate the active doses that are effective against bacterial biofilms. Furthermore, in vitro biocompatibility assays on osteoblast-like cells were carried out at different periods of times. Albeit a slight decrease in cell viability was observed at the very initial stage, due to the initial burst antibiotic release, the biocompatibility of these nanosystems is evidenced since a recovery of cell viability was achieved after 72 h of assay. Biological activity curves for GM released from MSNs exhibited sustained patterns and antibiotic doses in the 2-6 {\mu}g/mL range up to 100 h, which were not enough to eradicate biofilm. In the case of LVX and RIF first-order kinetics featuring an initial burst effect followed by a sustained release above the MIC up to 96 h were observed. Such doses reduced by 99.9% bacterial biofilm and remained active up to 72 h with no emergence of bacterial resistance.

q-bio.QM↗

arXiv2021

3D scaffold with effective multidrug sequential release against bacteria biofilm

Bone infection is a feared complication following surgery or trauma that remains as an extremely difficult disease to deal with. So far, the outcome of therapy could be improved with the design of 3D implants, which combine the merits of osseous regeneration and local multidrug therapy so as to avoid bacterial growth, drug resistance and the feared side effects. Herein, hierarchical 3D multidrug scaffolds based on nanocomposite bioceramic and polyvinyl alcohol (PVA) prepared by rapid prototyping with an external coating of gelatin-glutaraldehyde (Gel-Glu) have been fabricated. These 3D scaffolds contain three antimicrobial agents (rifampin, levofloxacin and vancomycin), which have been localized in different compartments of the scaffold to obtain different release kinetics and more effective combined therapy. Levofloxacin was loaded into the mesopores of nanocomposite bioceramic part, vancomycin was localized into PVA biopolymer part and rifampin was loaded in the external coating of Gel-Glu. The obtained results show an early and fast release of rifampin followed by sustained and prolonged release of vancomycin and levofloxacin, respectively, which are mainly governed by the progressive in vitro degradability rate of these scaffolds. This combined therapy is able to destroy Gram-positive and Gram-negative bacteria biofilms as well as inhibit the bacteria growth; in addition, these multifunctional scaffolds exhibit excellent bioactivity as well as good biocompatibility with complete cell colonization of preosteoblast in the entire surface, ensuring good bone regeneration. These findings suggest that these hierarchical 3D multidrug scaffolds are promising candidates as platforms for local bone infection therapy.

q-bio.TO↗

arXiv2021

Concanavalin A-targeted mesoporous silica nanoparticles for infection treatment

The ability of bacteria to form biofilms hinders any conventional treatment against chronic infections and has serious socio-economic implications. In this sense, a nanocarrier capable of overcoming the barrier of the mucopolysaccharide matrix of the biofilm and releasing its loaded-antibiotic within would be desirable. Herein, a new nanosystem based on levofloxacin (LEVO)-loaded mesoporous silica nanoparticles (MSNs) decorated with lectin Concanavalin A (ConA) has been developed. The presence of ConA promotes its internalization into the biofilm matrix, which increases the antimicrobial efficacy of the antibiotic hosted within the mesopores. This nanodevice is envisioned as a promising alternative to conventional infection treatments by improving the antimicrobial efficacy and reducing side effects.

q-bio.TO↗