arXiv subjects

Mario Juvenal S. Onglao III

Publications and source records attributed to Mario Juvenal S. Onglao III.

4 recordsLinked to original sources

arXiv2026

Noise reduction in suspension control with photon-pressure actuator for CHRONOS gravitational wave detector

Improving sub-Hz sensitivity of gravitational wave (GW) detectors is important to detect heavier binary black hole mergers and study phenomena in stronger gravity fields. Torsion-bar-based GW detectors have been projected to focus on low-frequency GW. Among noise sources of GW detector, actuation noise induced by vibration of force sources and fluctuation of environmental magnetic fields is one that increases in low frequency. In this study, we propose photon-pressure actuator as a solution to isolate an actuator from seismic and magnetic noise. It can also be used as a photon calibrator. We designed an optical layout of the photon-pressure actuator having four beams independently controlled and applied it to CHRONOS experiment. Based on a realistic power control system, we estimated its maximum torque amplitude around yaw rotation axis as $1.0\times 10^{-8}$ N$\cdot$m and actuation efficiency as $6.6\times 10^{-13}$ rad/V, which are sufficiently large for controlling the CHRONOS torsion bar. The actuation noise was estimated as $5.3\times 10^{-19}$ rad ${\rm Hz}^{-1/2}$ at 1 Hz, lower than the target sensitivity of CHRONOS. Assuming its usage as a photon calibrator, the estimated systematic error was 1.14%.

astro-ph.IM↗

arXiv2026

Prospects for Observing Gravity-gradient Noise and Earthquake Gravity Signals with CHRONOS

Ground-based gravitational-wave detectors operating in the sub-Hertz regime are expected to be strongly limited by environmental gravity-gradient fluctuations, commonly referred to as Newtonian Noise (NN). At the same time, this frequency band provides unique opportunities to probe terrestrial gravitational perturbations associated with seismic and atmospheric processes. In this work, we investigate the feasibility of using the proposed Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition speed meter (CHRONOS) as a platform for studying gravity-gradient noise and detecting prompt gravitational signals from earthquakes. We model gravity-gradient contributions from Rayleigh-wave-induced seismic fields, atmospheric infrasound fluctuations, and transient mass redistribution during earthquakes, and project these onto the CHRONOS torsion-bar response. CHRONOS achieves a peak strain sensitivity of order ~1e-18 Hz^(-1/2) near ~2 Hz. Rayleigh-wave NN is found to be the dominant environmental contribution below approximately 0.5 Hz, while atmospheric NN remains several orders of magnitude smaller throughout the frequency range considered. We further assess the detectability of prompt gravitational signals from earthquakes. For a representative Mw = 5.2 event, sources within approximately 90 km may produce detectable signals. At 40 km distance, we obtain a signal-to-noise ratio (SNR) of approximately 3.62 integrated over the sub-Hz band, with a corresponding strain amplitude reaching the CHRONOS sensitivity curve around 0.2 to 0.6 Hz. The gravitational signal is expected to precede seismic P-wave arrival by several seconds, depending on the assumed propagation velocity. These results demonstrate the potential of CHRONOS to probe both gravity-gradient noise and transient geophysical gravity signals in the sub-Hertz regime.

physics.ins-det↗

arXiv2026

Noise budget of Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

CHRONOS is a proposed gravitational-wave detector designed to operate in the sub-Hz frequency range (0.1 to 10 Hz), a largely unexplored band due to strong noise sources that hamper ground-based detectors. It employs cryogenic operation, a cross torsion-bar configuration, a triangular Sagnac interferometer, and a speed meter readout scheme to overcome key noise limitations, targeting a strain sensitivity of $h \sim 10^{-18} Hz^{-1/2}$ around 2 Hz and a stochastic gravitational wave background of $Ω_{GW}$ approximately $2 \times 10^{-3}$ at 2 Hz. Using analytical and interferometric simulations with FINESSE3, we evaluate the noise budget of CHRONOS and characterize the relative contributions of quantum, thermal, and environmental noise sources. Our results demonstrate that CHRONOS achieves competitive sensitivity at low frequencies. The feasibility of using CHRONOS in an earthquake early-warning system by detecting prompt gravity-gradient signals is also investigated, and is predicted to be faster by approximately 2.92 to 6.90 seconds within 40 km. These findings highlight the scientific potential of CHRONOS, bridging gravitational-wave astronomy and geophysical monitoring, and motivating further development of low-frequency detector technologies.

physics.ins-det↗

arXiv2026

Instrumental development for Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Gravitational waves from intermediate-mass black-hole (IMBH) binaries is a probe of strong-field gravity and black-hole evolution. Detection of IMBH is challenging because of their typically low frequency where the seismic noise, radiation pressure noise, and thermal noise dominate. The Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS) has been proposed to reach a strain sensitivity of $10^{-18} {\rm Hz}^{-1/2}$ at 2 Hz. It aims to detect GW from IMBH mergers with the mass of $\mathcal{O}(10^4)$ M$_{\odot}$ and to explore stochastic gravitational background of $Ω_{\rm GW} \sim 2\times 10^{-3}$ at 2 Hz. We present the overview of the CHRONOS hardware which is designed to integrate key techniques for improving low frequency sensitivity; torsion bar, speed meter, and cryogenic mirror. As a demonstration of the interferometer operation, we also report the commissioning status of a Michelson interferometer in National Central University in Taiwan which has been assembled as a partial component of CHRONOS.

astro-ph.IM↗