Searcharxiv⌕ Search

arXiv subjects

Marios Lestas

Publications and source records attributed to Marios Lestas.

7 recordsLinked to original sources

Noise Characterization and Robust Signal Detection in Yeast Pheromone Molecular Communication

A critical aspect of Molecular Communications (MC) is the implementation of signal detection policies amidst noise. To date, noise characterizations within the MC field have predominantly drawn from methodologies found in wireless communications literature. In this study, we diverge from existing MC research by utilizing a newly developed experimental platform that employs yeast, allowing us to consider more realistic noise characterizations based on the relevant signaling pathways. We propose suitable signal detection mechanisms tailored to this experimental setup, which focuses on yeast cell-to-cell communications. Our analysis identifies gene transcription as the primary source of noise, and we utilize a Markov birth-death process model with Poisson arrivals and departures to characterize it. The noisy expression of the FUS1 gene is best represented using a mixed Gaussian distribution model. This model serves as a foundation for evaluating the performance of Maximum Likelihood Detection mechanisms in terms of Bit Error Rate (BER) for both symbol-by-symbol and sequence transmission schemes. Error analysis indicates that appropriate adjustments to the signal threshold can reduce errors to as low as 10%, which is not negligible. In contrast, the detection of symbol sequences demonstrates enhanced error performance, achieving error rates as low as 0.4%, albeit at the cost of increased computational complexity.

cs.IT↗

A Copper-Inducible Yeast Biosensor with Bioluminescent Readout: Mathematical Modeling, Experimental Validation, and Photodetector Coupling for Molecular Communication in IoBNT

Engineered living biosensors constitute promising model organisms for bringing Molecular Communications (MC) closer to practical applications. However, challenges associated with their development and characterization have resulted in the relevant literature being limited in the MC domain, . In this paper, we contribute in this direction by leveraging engineered yeast as a basis to detect heavy metals such as copper. The biosensor's development is supported by a validated mathematical characterization and analysis for possible integration in an MC system. Different from the existing literature, mathematical representations of the major biological processes within the yeast copper detoxification pathway are integrated into a comprehensive framework that predicts the time evolution of the CUP1 gene, which is treated as the system output. In the engineered circuit, CUP1 was replaced with GFP, therefore making GFP fluorescence the final system output. Experimental analysis including mRNA transcript quantification and fluorometric measurements, validate the GFP reporting model to a satisfactory degree. This establishes the proposed model as a useful tool for virtual experimentation and the developed testbed as a suitable platform for further engineering of yeast-based copper sensors. The theoretical analysis is further extended by incorporating a self-sustained bioluminescent reporter for yeast, replacing GFP and enabling optical output without external light excitation. The optical response is coupled to a photodetector model, rendering the system suitable for integration into mobile monitoring devices such as Smart Pills. The presented characterization of the yeast receiver as a copper biosensor, constitutes the first step towards the development and characterization of a complete end-to-end MC based system for gut theranostics after coupling with suitable engineered probiotic senders.

cs.ET↗

Engineering Yeast Cells to Facilitate Information Exchange

Although continuous advances in theoretical modelling of Molecular Communications (MC) are observed, there is still an insuperable gap between theory and experimental testbeds, especially at the microscale. In this paper, the development of the first testbed incorporating engineered yeast cells is reported. Different from the existing literature, eukaryotic yeast cells are considered for both the sender and the receiver, with α-factor molecules facilitating the information transfer. The use of such cells is motivated mainly by the well understood biological mechanism of yeast mating, together with their genetic amenability. In addition, recent advances in yeast biosensing establish yeast as a suitable detector and a neat interface to in-body sensor networks. The system under consideration is presented first, and the mathematical models of the underlying biological processes leading to an end-to-end (E2E) system are given. The experimental setup is then described and used to obtain experimental results which validate the developed mathematical models. Beyond that, the ability of the system to effectively generate output pulses in response to repeated stimuli is demonstrated, reporting one event per two hours. However, fast RNA fluctuations indicate cell responses in less than three minutes, demonstrating the potential for much higher rates in the future.

cs.ET↗

Workload Characterization of Programmable Metasurfaces

Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost.

cs.NI↗

Toward Fault-Tolerant Deadlock-Free Routing in HyperSurface-Embedded Controller Networks

HyperSurfaces (HSFs) consist of structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers. With the HSF controllers, interconnected in an irregular, near-Manhattan geometry, we propose a robust, deterministic Fault-Tolerant (FT), deadlock- and livelock-free routing protocol where faults are contained in a set of disjointed rectangular regions called faulty blocks. The proposed FT protocol can support an unbounded number of faulty nodes as long as nodes outside the faulty blocks are connected. Simulation results show the efficacy of the proposed FT protocol under various faulty node distribution scenarios.

cs.NI↗

Fault Adaptive Routing in Metasurface Controller Networks

HyperSurfaces are a merge of structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers, thus enabling novel capabilities in wireless communications. Resource constraints associated with the development of a hardware testbed of this breakthrough technology necessitate network controller architectures different from traditional regular Network-on-Chip architectures. The Manhattan-like topology chosen to realize the controller network in the testbed under development is irregular, with restricted local path selection options, operating in an asynchronous fashion. These characteristics render traditional fault-tolerant routing mechanisms inadequate. In this paper, we present work in progress towards the development of fault-tolerant routing mechanisms for the chosen architecture. We present two XY-based approaches which have been developed aiming to offer reliable data delivery in the presence of faults. The first approach aims to avoid loops while the second one attempts to maximize the success delivery probabilities. Their effectiveness is demonstrated via simulations conducted on a custom developed simulator.

cs.ET↗

Received Signal Strength for Randomly Distributed Molecular Nanonodes

We consider nanonodes randomly distributed in a circular area and characterize the received signal strength when a pair of these nodes employ molecular communication. Two communication methods are investigated, namely free diffusion and diffusion with drift. Since the nodes are randomly distributed, the distance between them can be represented as a random variable, which results in a stochastic process representation of the received signal strength. We derive the probability density function of this process for both molecular communication methods. Specifically for the case of free diffusion we also derive the cumulative distribution function, which can be used to derive transmission success probabilities. The presented work constitutes a first step towards the characterization of the signal to noise ratio in the considered setting for a number of molecular communication methods.

cs.ET↗