arXiv subjects

Mariusz Klimczak

Publications and source records attributed to Mariusz Klimczak.

15 recordsLinked to original sources

arXiv2024

Localization of macroscopic sources of magnetic field using optical fibers doped with NV-rich sub-micron diamonds and zero-field resonance

We employ an optical fiber doped with randomly oriented fluorescent sub-micron diamonds and the novel zero-field resonance protocol to collect information on the localization and orientation of a magnetic-field source and its distribution. Many previous demonstrations of diamond-based magnetic field sensing achieved ultrahigh sensitivities down to the fT range warranted by manipulating spin states of the diamond nitrogen vacancy (NV) centers with externally applied radio or microwaves. The application of such oscillating fields is problematic in distributed magnetic-field measurements and may be incompatible with specific targets. Instead of relying on these approaches, we leveraged cross-relaxations of particular spin-state populations of the NV center under a magnetic field, thus observing zero-field resonances and making external radio frequency fields redundant. Combined with an optical fiber sensitive to the magnetic field along its entire length, remote sensing was realized that returned information on the spatial field distribution without using any moving mechanical elements in the detection system. Variation of the spatial parameters of the investigated field was achieved simply by controlling the current in a pair of induction coils easily integrable with optical fibers without limiting the fiber-specific functionality of the optical readout taking place at a fixed location at the optical fiber output. Lifting of the requirements related to the mechanical scanning of the fiber, the application of external fields, and the orientation of the NV centers against the measured field mark a very practical step forward in optically driven magnetic field sensing, not easily achievable with earlier implementations.

physics.app-ph↗

arXiv2024

Supercontinuum generation in a graded-index multimode tellurite fiber

We report a near two-octave spanning supercontinuum (SC) from 790 nm to 2900 nm in a nanostructured tellurite graded-index multimode fiber with a nanostructured core. We study the SC dynamics in different dispersion regimes and observe near-single mode spatial intensity distribution at high input energy values. Numerical simulations of the (3+1)D generalized nonlinear Schrödinger equation are in good agreement with our experiments. Our results open a new avenue for the generation of high-power mid-infrared SC sources in soft glass fibers.

physics.optics↗

arXiv2022

Noise in supercontinuum generated using PM and non-PM tellurite glass all-normal dispersion fibers

Intensity fluctuations in supercontinuum generation are studied in polarization-maintaining (PM) and non-PM all-normal dispersion tellurite photonic crystal fibers. Dispersive Fourier transformation is used to resolve the shot-to-shot spectra generated using 225 fs pump pulses at 1.55 μm, with experimental results well reproduced by vector and scalar numerical simulations. By comparing the relative intensity noise for the PM and non-PM cases, supported by simulations, we demonstrate the advantage of the polarization-maintaining property of the PM fibers in preserving low-noise dynamics. We associate the low-noise in the PM case with the suppression of polarization modulation instability.

physics.optics↗

arXiv2021

Tellurite glass rods with nanodiamonds as photonic magnetic field and temperature sensors

We present the results of work on a hybrid material composed of a tellurite glass rod doped with nanodiamonds containing nitrogen-vacancy-nitrogen and paramagnetic nitrogen-vacancy color centers. The reported results include details on tellurite glass and cane fabrication, confocal and wide-field imaging of the nanodiamond distribution in their volume, as well as on the spectroscopic characterization of their fluorescence and Optically Detected Magnetic Resonance measurements of magnetic fields and temperatures. Magnetic fields up to 50 G were examined with a sensitivity of 10$^{-5}$ T Hz$^{-1/2}$ whereas temperature measurements were simultaneously performed with a sensitivity of 74 kHz K$^{-1}$ within the 8 Kelvin range at room temperature. In that way, we demonstrate the suitability of such systems for fiber magneto- and thermometry with a reasonable performance already in the form of glass rods. At the same time, the rods constitute an interesting starting point for further processing into photonic components such as microstructured fibers or fiber tapers for the realization of specialized sensing modalities.

physics.optics↗

arXiv2021

Volumetric incorporation of NV diamond emitters in nanostructured F2 glass magneto-optical fiber probes

Integration of optically-active nanodiamonds with glass fibers is a powerful method of scaling of diamond magnetic sensing functionality. We propose a novel approach for integration of nanodiamonds containing nitrogen-vacancy centers directly into the fiber core. The core is fabricated using nanostructurization, that is by stacking the preform from 790 soft glass canes, drawn from a single rod dip-coated with nanodiamonds suspended in isopropyl alcohol. This enables manual control over distribution of nanoscale features, here - the nanodiamonds across and along the fiber core. We verify this by mapping the nanodiamond distribution in the core using confocal microscopy. The nanodiamonds are separated longitudinally either by 15 microns or 24 microns, while in the transverse plane separation of approximately 1 micron is observed, corresponding to the individual cane diameter in the final fiber, without significant agglomeration. Filtered, red fluorescence is observed with naked eye uniformly along the fiber. Its magnetic sensitivity is confirmed by in optically detected magnetic resonance recorded with a coiled, 60-cm-long fiber sample with readout contrast limited mainly by microwave antenna coverage. NV fluorescence intensity in 0 to 35 mT magnetic field is also demonstrated, allowing magnetometry applications with a large B-field dynamic range in absence of microwaves.

cond-mat.mtrl-sci↗

arXiv2021

Two octave supercontinuum generation in a non-silica graded-index multimode fiber

The generation of a two-octave supercontinuum from the visible to mid-infrared (700 - 2800 nm) in a non-silica graded-index multimode fiber is reported. The fiber design is based on a nanostructured core comprised of two types of drawn lead-bismuth-gallate glass rods with different refractive indices. This structure yields an effective parabolic index profile, an extended transmission window, and ten times increased nonlinearity when compared to silica fibers. Using femtosecond pulse pumping at wavelengths in both normal and anomalous dispersion regimes, a detailed study is carried out into the supercontinuum generating mechanisms and instabilities seeded by periodic self imaging. Significantly, suitable injection conditions in the high power regime are found to result in the output beam profile showing clear signatures of beam self-cleaning from nonlinear mode mixing. Experimental observations are interpreted using spatio-temporal 3+1D numerical simulations of the generalized nonlinear Schrödinger equation, and simulated spectra are in excellent agreement with experiment over the full two-octave spectral bandwidth. These results demonstrate a new pathway towards the generation of bright, ultrabroadband light sources in the mid-infrared.

physics.optics↗

arXiv2019

Period doubling of multiple dissipative-soliton-resonance pulses in a fiber laser

We report on the experimental observation of period doubling of multiple dissipative-soliton-resonance (DSR) pulses in an all-normal-dispersion fiber laser based on a nonlinear amplifying loop mirror. By increasing the pump power, in addition to the typically linearly pulse broadening under fixed pulse peak power, the jump from a single DSR pulse to multiple DSR pulses was observed. During this process, the period doubling appears, that is, the DSR pulses can exhibit the characteristics of period doubling in a multi-pulse state. The typical DSR performance of linearly pulse duration change versus pump power varying can be maintained when the period doubling of multiple DSR pulses appears.

nlin.PS↗

arXiv2019

Period doubling eigenstates in a fiber laser mode-locked by nonlinear polarization rotation

Due to the weak birefringence of single mode fibers, solitons generated in fiber lasers are indeed vector pulses and exhibit periodic parameter change including polarization evolution even when there is a polarizer inside the cavity. Period doubling eigenstates of solitons generated in a fiber laser mode-locked by the nonlinear polarization rotation, i.e., period doubling of polarization components of the soliton, are numerically explored in detail. We found that, apart from the synchronous evolution between the two polarization components, there exists asynchronous development depending on the detailed operation conditions. In addition, period doubling of one polarization component together with period-one of another polarization component can be achieved. When the period tripling window is obtained, much complexed dynamics on the two polarization components could be observed.

nlin.CD↗

arXiv2019

Period-doubling bifurcation of dissipative-soliton-resonance pulses in a passively mode-locked fiber laser

We report on the experimental observation of period-doubling bifurcation of dissipative-soliton-resonance (DSR) pulses in a fiber laser passively mode-locked by using the nonlinear optical loop mirror. Increasing the pump power of the fiber laser, we show that temporally a stable, uniform DSR pulse train could be transformed into a period-doubling state, exhibiting two sets of pulse parameters between the adjacent cavity roundtrip. It is found that DSR pulses in the period-doubling state could maintain the typical feature of DSR pulse: fixed pulse peak power and linear variation in pulse width with respect to the pump power change. The mechanism for achieving period-doubling of DSR pulses is discussed.

physics.optics↗

arXiv2019

Low noise all-fiber amplification of a coherent supercontinuum at 2 μm and its limits imposed by polarization noise

We report the amplification of an all-normal dispersion supercontinuum pulse in a Thulium / Holmium co-doped all-fiber chirped pulse amplification system. With a -20 dB bandwidth of more than 300 nm in the range 1800-2100 nm the system delivers high quality 66 fs pulses with more than 70 kW peak power directly from the output fiber. The coherent seeding of the entire emission bandwidth of the doped fiber and the stability of the supercontinuum generation dynamics in the silicate glass all-normal dispersion photonic crystal fiber result in excellent noise characteristics of the amplified ultrashort pulses.

physics.optics↗

arXiv2019

Nested-capillary anti-resonant silica fiber with mid-infrared transmission and low bending sensitivity at 4000 nm

We report a silica glass nested capillary anti-resonant nodeless fiber with transmission and low bending sensitivity in the mid-infrared around 4000 nm. The fiber is characterized in terms of transmission over 1700-4200 nm wavelengths, revealing a mid-infrared 3500-4200 nm transmission window, clearly observable for a 12 m long fiber. Bending loss around 4000 nm is 0.5 dB/m measured over 3 full turns with 40 mm radius, going up to 5 dB/m for full turns with 15 mm radius. Our results provide experimental evidence of hollow-core silica fibers in which nested, anti-resonant capillaries provide high bend resistance in the mid-infrared. This is obtained for a fiber with large core diameter of over 60 um relative to around 30 um-capillaries in the cladding, which motivates its application in gas fiber lasers or fiber-based mid-infrared spectroscopy of COx or NxO analytes.

physics.optics↗

arXiv2019

Coherent supercontinuum generation in tellurite glass regular lattice photonic crystal fibers

We report on designing, fabrication and experimental characterization of highly nonlinear, tellurite glass photonic crystal fibers with engineered normal dispersion characteristics for coherent supercontinuum generation. Effectively single mode, air-hole lattice fibers, with measured, all-normal dispersion profiles as flat as -10 to -50 ps/mn/km over 1500-2400 nm wavelengths are developed and investigated. Supercontinuum spectra are measured for these fibers, with a spectral width covering 1100-2600 nm wavelengths under pumping with a robust, fixed-wavelength erbium fiber-based femtosecond laser, delivering 90 fs pulses, centered at 1560 nm with peak power below 40 kW. To the best of our knowledge, this is the first engineered microstructured fiber, which due to its high nonlinearity, enables a self-phase modulation and optical wave breaking-based supercontinuum pumped with a turn-key, 40 kW femtosecond laser at spectral widths obtainable with previous all-normal dispersion fiber designs only under pumping with systems delivering peak power in the MW range.

physics.optics↗

arXiv2019

Development of highly nonlinear polarization maintaining fibers with normal dispersion across entire transmission window

Determined polarization state of light is required in nonlinear optics applications related to ultrashort and single-cycle light pulse generation. Such short time scales require up to full octave of spectral width of light. Fiber-based, pulse-preserving and linearly polarized supercontinuum can meet these requirements. We report on the development - from linear simulations of the fiber structure, through fabrication of physical fibers to their versatile characterization - of polarization maintaining, highly nonlinear photonic crystal fibers, intended for femtosecond pumping at a wavelength of 1560 nm. Full octave of linearly polarized light around this wavelength would enable to cover amplification bandwidths of the three major fiber amplifiers from ytterbium doped systems up to thulium and holmium doped fiber amplifiers, with a coherent, linearly polarized seed signal. At the same time, an all-normal chromatic dispersion profile over an entire transmission window, and small dispersion of nonlinearity in the developed fibers, would facilitate use of commercially available femtosecond fiber lasers as pump sources for the developed fibers.

physics.app-ph↗

arXiv2018

Development of suspended core soft glass fibers for far-detuned parametric conversion

Light sources utilizing \c{hi}(2) parametric conversion combine high brightness with attractive operation wavelengths in the near and mid-infrared. In optical fibers it is possible to use \c{hi}(3) degenerate four-wave mixing in order the obtain signal-to-idler frequency detuning of over 100 THz. We report on a test series of nonlinear soft glass suspended core fibers intended for parametric conversion of 1000-1100 nm signal wavelengths available from an array of mature lasers into the near-to-mid-infrared range of 2700-3500 nm under pumping with an erbium sub-picosecond laser system. Presented discussion includes modelling of the fiber properties, details of their physical development and characterization, as well as experimental tests of parametric conversion.

physics.optics↗

arXiv2018

Dispersion Measurement of Ultra-High Numerical Aperture Fibers covering Thulium, Holmium, and Erbium Emission Wavelengths

We present broadband group velocity dispersion (GVD) measurements of commercially available ultra-high numerical aperture fibers (UHNA1, UHNA3, UHNA4, UHNA7 and PM2000D from Coherent-Nufern). Although these fibers are attractive for dispersion management in ultrafast fiber laser systems in the 2 μm wavelength region, experimental dispersion data in literature is scarce and inconsistent. Here we demonstrate the measurements using the spectral interferometry technique covering the typically used erbium, thulium and holmium emission bands. The results are characterized in terms of the standard-deviation uncertainty and compared with previous literature reports. Fitting parameters are provided for each fiber allowing for the straightforward replication of the measured dispersion profiles. This work is intended to facilitate the design of ultrafast fiber laser sources and the investigations of nonlinear optical phenomena.

physics.ins-det↗