arXiv subjects

Mark Asta

Publications and source records attributed to Mark Asta.

At least 37 records · Page 2Linked to original sources

arXiv2023

Extra electron reflections in concentrated alloys do not necessitate short-range order

In many concentrated alloys of current interest, the observation of diffuse superlattice intensities by transmission electron microscopy has been attributed to chemical short-range order. We briefly review these findings and comment on the plausibility of widespread interpretations, noting the absence of expected peaks, conflicts with theoretical predictions, and the possibility of alternative explanations.

cond-mat.mtrl-sci↗

arXiv2023

Designing transparent conductors using forbidden optical transitions

Many semiconductors present weak or forbidden transitions at their fundamental band gaps, inducing a widened region of transparency. This occurs in high-performing n-type transparent conductors (TCs) such as Sn-doped In2O3 (ITO), however thus far the presence of forbidden transitions has been neglected in searches for new p-type TCs. To address this, we first compute high-throughput absorption spectra across ~18,000 semiconductors, showing that over half exhibit forbidden or weak optical transitions at their band edges. Next, we demonstrate that compounds with highly localized band edge states are more likely to present forbidden transitions. Lastly, we search this set for p-type and n-type TCs with forbidden or weak transitions. Defect calculations yield unexplored TC candidates such as ambipolar BeSiP2, Zr2SN2 and KSe, p-type BAs, Au2S, and AuCl, and n-type Ba2InGaO5, GaSbO4, and KSbO3, among others. We share our data set via the MPContribs platform, and we recommend that future screenings for optical properties use metrics representative of absorption features rather than band gap alone.

cond-mat.mtrl-sci↗

arXiv2022

Theoretical antiferromagnetism of ordered face-centered cubic Cr-Ni alloys

Contrary to prior calculations, the Ni-rich ordered structures of the Cr-Ni alloy system are found to be antiferromagnetic under semi-local density-functional theory. The optimization of local magnetic moments significantly increases the driving force for the formation of CrNi$_2$, the only experimentally observed intermetallic phase. This structure's ab initio magnetism appears well described by a Heisenberg Hamiltonian with longitudinal spin fluctuations; itinerant Cr moments are induced only by the strength of exchange interactions. The role of magnetism at temperature is less clear and several scenarios are considered based on a review of experimental literature, specifically a failure of the theory, the existence of an overlooked magnetic phase transition, and the coupling of antiferromagnetism to chemical ordering. Implications for related commercial and high-entropy alloys are discussed for each case.

cond-mat.mtrl-sci↗

arXiv2022

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys close to liquid helium temperatures

Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the JIc and (back-calculated) KJIc fracture toughness values of the face-centered cubic, equiatomic CrCoNi and CrMnFeCoNi alloys at 20 K. At flow stress values of ~1.5 GPa, crack-initiation KJIc toughnesses were found to be exceptionally high, respectively 235 and 415 MPa(square-root)m for CrMnFeCoNi and CrCoNi, with the latter displaying a crack-growth toughness Kss exceeding 540 MPa(square-root)m after 2.25 mm of stable cracking, which to our knowledge is the highest such value ever reported. Characterization of the crack-tip regions in CrCoNi by scanning electron and transmission electron microscopy reveal deformation structures at 20 K that are quite distinct from those at higher temperatures and involve heterogeneous nucleation, but restricted growth, of stacking faults and fine nano-twins, together with transformation to the hexagonal closed-packed phase. The coherent interfaces of these features can promote both the arrest and transmission of dislocations to generate respectively strength and ductility which strongly contributes to sustained strain hardening. Indeed, we believe that these nominally single-phase, concentrated solid-solution alloys develop their fracture resistance through a progressive synergy of deformation mechanisms, including dislocation glide, stacking-fault formation, nano-twinning and eventually in situ phase transformation, all of which serve to extend continuous strain hardening which simultaneously elevates strength and ductility (by delaying plastic instability), leading to truly exceptional resistance to fracture.

cond-mat.mtrl-sci↗

arXiv2022

One Dimensional Wormhole Corrosion in Metals

Corrosion is a ubiquitous failure mode of materials in extreme environments. The more localized it is, the more difficult it is to detect and more deleterious its effects. Often, the progression of localized corrosion is accompanied by the evolution of porosity in materials, creating internal void-structures that facilitate the ingress of the external environment into the interior of the material, further accelerating the internal corrosion. Previously, the dominant morphology of such void-structures has been reported to be either three-dimensional (3D) or two-dimensional (2D). Here, we report a more localized form of corrosion, which we call 1D wormhole corrosion. Using electron tomography, we show multiple examples of this 1D and percolating morphology that manifests a significantly high aspect ratio differentiable from 2D and 3D corrosion. To understand the origin of this mechanism in a Ni-Cr alloy corroded by molten salt, we combined energy-filtered four-dimensional scanning transmission electron microscopy (EF-4D-STEM) and ab initio density functional theory (DFT) calculations to develop a vacancy mapping method with nanometer-resolution, identifying a remarkably high vacancy concentration in the diffusion-induced grain boundary migration (DIGM) zone, up to 100 times the equilibrium value at the melting point. These vacancy supersaturation regions act as the precursors of wormholes, and lead to the asymmetrical growth of voids along GBs. We show that similar 1D penetrating corrosion morphologies could also occur in other materials or corrosion conditions, implying the broad impact of this extremely localized corrosion mechanism. Deciphering the origins of 1D corrosion is an important step towards designing structural materials with enhanced corrosion resistance, and also offers new pathways to create ordered-porous materials for functional applications.

cond-mat.mtrl-sci↗

arXiv2022

Nonequilibrium free-energy calculation of solids using LAMMPS

This article describes nonequilibrium techniques for the calculation of free energies of solids using molecular dynamics (MD) simulations. These methods provide an alternative to standard equilibrium thermodynamic integration methods and often present superior efficiency. Here we describe the implementation in the LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator) code of two specific nonequilibrium processes that allow the calculation of the free-energy difference between two different system Hamiltonians as well as the free-energy temperature dependence of a given Hamiltonian, respectively. The theory behind the methods is summarized, and we describe (including fragments of LAMMPS scripts) how the process parameters should be selected to obtain the best-possible efficiency in the calculations of free energies using nonequilibrium MD simulations. As an example of the application of the methods we present results related to polymorphic transitions for a classical potential model of iron.

cond-mat.mtrl-sci↗

arXiv2021

Twin-Boundary Structural Phase Transitions in Elemental Titanium

Twinning in crystalline materials plays an important role in many transformation and deformation processes, where underlying mechanisms can be strongly influenced by the structural, energetic and kinetic properties of associated twin boundaries (TBs). While these properties are well characterized in common cases, the possibility that TBs can display multiple complexions with distinct properties, and phase transitions between them, has not been widely explored, even though such phenomena are established in a few more general grain boundaries. We report experimental findings that {11-24} TBs in titanium display a thick interfacial region with crystalline structure distinct from the bulk. First-principles calculations establish that this complexion is linked to a metastable polymorph of titanium, and exhibits behavior consistent with a solid-state wetting transition with compressive strain, and a first-order structural transition under tension. The findings document rich TB complexion behavior in an elemental metal, with important implications for mechanical behavior and phase-transformation pathways.

cond-mat.mtrl-sci↗

arXiv2021

Magnetically driven short-range order can explain anomalous measurements in CrCoNi

The presence, nature, and impact of chemical short-range order in the multi-principal element alloy CrCoNi are all topics of current interest and debate. First-principles calculations reveal that its origins are fundamentally magnetic, involving repulsion between like-spin Co-Cr and Cr-Cr pairs that is complemented by the formation of a magnetically aligned sublattice of second-nearest-neighbor Cr atoms. Ordering models following these principles are found to predict otherwise anomalous experimental measurements concerning both net magnetization and atomic volumes across a range of compositions. In addition to demonstrating the impact of magnetic interactions and resulting chemical rearrangement, the possible explanation of experiments would imply that short-range order of this type is far more prevalent than previously realized.

cond-mat.mtrl-sci↗

arXiv2020

Kinetics of Crystallization and Orientational Ordering in Dipolar Particle Systems

The kinetic mechanisms underlying bottom-up assembly of colloidal particles have been widely investigated in efforts to control crystallization pathways and to direct growth into targeted superstructures for applications including photonic crystals. Current work builds on recent progress in the development of kinetic theories for crystal growth of body-centered-cubic crystals in systems with short-range inter-particle interactions, accounting for a greater diversity of crystal structures and the role of the longer-ranged interactions and orientational degrees of freedom arising in polar systems. We address the importance of orientational ordering processes in influencing crystal growth in such polar systems, thus advancing the theory beyond the treatment of the translational ordering processes considered in previous investigations. The work employs comprehensive molecular-dynamics simulations that resolve key crystallization processes, and are used in the development of a quantitative theoretical framework based on ideas from time-dependent Ginzburg-Landau theory. The significant impact of orientational ordering on the crystallization kinetics could be potentially leveraged to achieve crystallization kinetics steering through external electric or magnetic fields. Our combined theory/simulation approach provides opportunities for future investigations of more complex crystallization kinetics.

cond-mat.mtrl-sci↗

arXiv2020

Ab initio modeling of the energy landscape for screw dislocations in body-centered cubic high-entropy alloys

In traditional body-centered cubic (bcc) metals, the core properties of screw dislocations play a critical role in plastic deformation at low temperatures. Recently, much attention has been focused on refractory high-entropy alloys (RHEAs), which also possess bcc crystal structures. However, unlike face-centered cubic high-entropy alloys (HEAs), there have been far fewer investigations on bcc HEAs, specifically on the possible effects of chemical short-range order (SRO) in these multiple principal element alloys on dislocation mobility. Here, using density functional theory, we investigate the distribution of dislocation core properties in MoNbTaW RHEAs alloys, and how they are influenced by SRO. The average values of the core energies in the RHEA are found to be larger than those in the corresponding pure constituent bcc metals, and are relatively insensitive to the degree of SRO. However, the presence of SRO is shown to have a large effect on narrowing the distribution of dislocation core energies and decreasing the spatial heterogeneity of dislocation core energies in the RHEA. It is argued that the consequences for the mechanical behavior of HEAs is a change in the energy landscape of the dislocations which would likely heterogeneously inhibit their motion.

cond-mat.mtrl-sci↗

arXiv2019

Verification of Short-Range Order and Its Impact on the Properties of the CrCoNi Medium Entropy Alloy

Traditional metallic alloys are mixtures of elements where the atoms of minority species tend to distribute randomly if they are below their solubility limit, or lead to the formation of secondary phases if they are above it. Recently, the concept of medium/high entropy alloys (MEA/HEA) has expanded this view, as these materials are single-phase solid solutions of generally equiatomic mixtures of metallic elements that have been shown to display enhanced mechanical properties. However, the question has remained as to how random these solid solutions actually are, with the influence of chemical short-range order (SRO) suggested in computational simulations but not seen experimentally. Here we report the first direct observation of SRO in the CrCoNi MEA using high resolution and energy-filtered transmission electron microscopy. Increasing amounts of SRO give rise to both higher stacking fault energy and hardness. These discoveries suggest that the degree of chemical ordering at the nanometer scale can be tailored through thermomechanical processing, providing a new avenue for tuning the mechanical properties of MEA/HEAs.

cond-mat.mtrl-sci↗

arXiv2019

Pawpyseed: Perturbation-extrapolation band shifting corrections for point defect calculations

Significant progress has been made recently in the automation and standardization of ab initio point defect calculations. However, the task of developing, implementing, and benchmarking charge corrections for density functional theory (DFT) point defect calculations is still an open challenge. Here we present a high-performance Python package called pawpyseed, which can read PAW DFT wave functions and calculate the overlap between wavefunctions from different structures. Using pawpyseed, we implement a new band shifting correction derived from first order perturbation theory. We benchmark this method by calculating the transition levels of several point defects in silicon and comparing to experimental and hybrid functional results. The new band shifting method can shift single-particle energies to improve transition level predictions and can be automated and parallelized using pawpyseed, suggesting it could be a useful method for high-throughput point defect calculations.

cond-mat.mtrl-sci↗

arXiv2018

Quantum effects on dislocation motion from Ring-Polymer Molecular Dynamics

Quantum motion of atoms known as zero-point vibrations is recognized to be important at low temperatures in condensed matter systems comprised of light atoms or ions, affecting such properties and behaviors as proton-transfer reactions, vibrational spectra of water and ice, and mechanical properties of low temperature helium. Recently, quantum motion of atoms was proposed to explain a long-standing discrepancy between theoretically computed and experimentally measured low-temperature resistance (Peierls stress) to dislocation motion in iron and possibly other metals with high atomic masses. Here we report the first direct simulations of quantum motion of screw dislocations in iron within the exact formalism of Ring-Polymer Molecular Dynamics (RPMD) that rigorously accounts for quantum effects on the statistics of condensed-phase systems. Our quantum RPMD simulations predict only a modest ($\approx\!13\%$) reduction in the Peierls stress in iron compared to its fully classical prediction. Our simulations confirm that reduction in the Peierls stress solely due to the zero-point energy is close to $50\%$ predicted earlier, but its effect is substantially offset by an increase in the effective atom size with decreasing temperature, an effect known as quantum dispersion. Thus, quantum motion of atoms does not resolve the notorious discrepancy between theoretical and experimental values of the Peierls stress in iron.

cond-mat.mtrl-sci↗

arXiv2018

Free energy of grain boundary phases: Atomistic calculations for $Σ$5(310)[001] grain boundary in Cu

Atomistic simulations are employed to demonstrate the existence of a well-defined thermodynamic phase transformation between grain boundary (GB) phases with different atomic structures. The free energy of different interface structures for an embedded-atom-method model of the $Σ5 (310) [001]$ symmetric tilt boundary in elemental Cu is computed using the nonequilibrium Frenkel-Ladd thermodynamic integration method through molecular dynamics simulations. It is shown that the free-energy curves predict a temperature-induced first-order interfacial phase transition in the GB structure in agreement with computational studies of the same model system. Moreover, the role of vibrational entropy in the stabilization of the high-temperature GB phase is clarified. The calculated results are able to determine the GB phase stability at homologous temperatures less than $0.5$, a temperature range particularly important given the limitation of the methods available hitherto in modeling GB phase transitions at low temperatures. The calculation of GB free energies complements currently available $0\,\mathrm{K}$ GB structure search methods, making feasible the characterization of GB phase diagrams.

cond-mat.mtrl-sci↗

arXiv2018

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

High-entropy alloys (HEAs) are an intriguing new class of metallic materials due to their unique mechanical behavior. Achieving a detailed understanding of structure-property relationships in these materials has been challenged by the compositional disorder that underlies their unique mechanical behavior. Accordingly, in this work, we employ first-principles calculations to investigate the nature of local chemical order and establish its relationship to the intrinsic and extrinsic stacking fault energy (SFE) in CrCoNi medium-entropy solid-solution alloys, whose combination of strength, ductility and toughness properties approach the best on record. We find that the average intrinsic and extrinsic SFE are both highly tunable, with values ranging from -43 mJ.m-2 to 30 mJ.m-2 and from -28 mJ.m-2 to 66 mJ.m-2, respectively, as the degree of local chemical order increases. The state of local ordering also strongly correlates with the energy difference between the face-centered cubic (fcc) and hexagonal-close packed (hcp) phases, which affects the occurrence of transformation-induced plasticity. This theoretical study demonstrates that chemical short-range order is thermodynamically favored in HEAs and can be tuned to affect the mechanical behavior of these alloys. It thus addresses the pressing need to establish robust processing-structure-property relationships to guide the science-based design of new HEAs with targeted mechanical behavior.

cond-mat.mtrl-sci↗

arXiv2017

Capillary fluctuations of surface steps: An atomistic simulation study for the model Cu(111) system

Molecular dynamics (MD) simulations are employed to investigate the capillary fluctuations of steps on the surface of a model metal system. The fluctuation spectrum, characterized by the wave number ($k$) dependence of the mean squared capillary-wave amplitudes and associated relaxation times, is calculated for $\left<110\right>$ and $\left<112\right>$ steps on the $\{111\}$ surface of elemental copper near the melting temperature of the classical potential model considered. Step stiffnesses are derived from the MD results, yielding values from the largest system sizes of $(37\pm1) \, \mathrm{meV}/\mathring{\mathrm{A}}$ for the different line orientations, implying that the stiffness is isotropic within the statistical precision of the calculations. The fluctuation lifetimes are found to vary by approximately four orders of magnitude over the range of wave numbers investigated, displaying a $k$ dependence consistent with kinetics governed by step-edge mediated diffusion. The values for step stiffness derived from these simulations are compared to step free energies for the same system and temperature obtained in a recent MD-based thermodynamic-integration (TI) study [Freitas, Frolov, and Asta, Phys. Rev. B 95, 155444 (2017)]. Results from the capillary-fluctuation analysis and TI calculations yield statistically significant differences that are discussed within the framework of statistical-mechanical theories for configurational contributions to step free energies.

cond-mat.mtrl-sci↗

arXiv2017

Computational Study of Halide Perovskite-Derived A$_2$BX$_6$ Inorganic Compounds: Chemical Trends in Electronic Structure and Structural Stability

The electronic structure and energetic stability of A$_2$BX$_6$ halide compounds with the cubic and tetragonal variants of the perovskite-derived K$_2$PtCl$_6$ prototype structure are investigated computationally within the frameworks of density-functional-theory (DFT) and hybrid (HSE06) functionals. The HSE06 calculations are undertaken for seven known A$_2$BX$_6$ compounds with A = K, Rb and Cs, and B = Sn, Pd, Pt, Te, and X = I. Trends in band gaps and energetic stability are identified, which are explored further employing DFT calculations over a larger range of chemistries, characterized by A = K, Rb, Cs, B = Si, Ge, Sn, Pb, Ni, Pd, Pt, Se and Te and X = Cl, Br, I. For the systems investigated in this work, the band gap increases from iodide to bromide to chloride. Further, variations in the A site cation influences the band gap as well as the preferred degree of tetragonal distortion. Smaller A site cations such as K and Rb favor tetragonal structural distortions, resulting in a slightly larger band gap. For variations in the B site in the (Ni, Pd, Pt) group and the (Se, Te) group, the band gap increases with increasing cation size. However, no observed chemical trend with respect to cation size for band gap was found for the (Si, Sn, Ge, Pb) group. The findings in this work provide guidelines for the design of halide A$_2$BX$_6$ compounds for potential photovoltaic applications.

cond-mat.mtrl-sci↗

arXiv2017

PyCDT: A Python toolkit for modeling point defects in semiconductors and insulators

Point defects have a strong impact on the performance of semiconductor and insulator materials used in technological applications, spanning microelectronics to energy conversion and storage. The nature of the dominant defect types, how they vary with processing conditions, and their impact on materials properties are central aspects that determine the performance of a material in a certain application. This information is, however, difficult to access directly from experimental measurements. Consequently, computational methods, based on electronic density functional theory (DFT), have found widespread use in the calculation of point-defect properties. Here we have developed the Python Charged Defect Toolkit (PyCDT) to expedite the setup and post-processing of defect calculations with widely used DFT software. PyCDT has a user-friendly command-line interface and provides a direct interface with the Materials Project database. This allows for setting up many charged defect calculations for any material of interest, as well as post-processing and applying state-of-the-art electrostatic correction terms. Our paper serves as a documentation for PyCDT, and demonstrates its use in an application to the well-studied GaAs compound semiconductor. We anticipate that the PyCDT code will be useful as a framework for undertaking readily reproducible calculations of charged point-defect properties, and that it will provide a foundation for automated, high-throughput calculations.

cond-mat.mtrl-sci↗