Searcharxiv⌕ Search

arXiv subjects

Mark C. Hardy

Publications and source records attributed to Mark C. Hardy.

2 recordsLinked to original sources

A New High $γ$-$γ'$ Fraction Polycrystalline Co/Ni Superalloy

An ingot-processable Co/Ni-based $γ/γ'$ superalloy has been developed for wrought parts in aircraft engines. An 8.5 kg VIM ingot was homogenised and hot rolled to a true strain of 1. A heat treatment was then developed to produce 50% $γ'$ and a grain size of 142 $μ$m. High-temperature tensile testing showed yield strengths of 820 MPa at 700 $^\circ$C, 785 MPa at 800 $^\circ$C and 783 MPa at 850 $^\circ$C. Creep tests at 750 $^\circ$C/600 MPa and 800 $^\circ$C/300 MPa demonstrated reduced minimum creep rates and extended rupture lives relative to current wrought Ni-base alloys. Oxidation at 800 $^\circ$C for 100 h formed a 1 $μ$m dual chromia/alumina scale with minimal subsurface degradation. Long-term exposure at 800 $^\circ$C for 8000 h showed limited $γ'$ coarsening and no deleterious intermetallic or grain boundary phases. The alloy therefore offers a promising balance of processability, strength and oxidation resistance for high-temperature static and rotating components.or grain boundary phases. The alloy therefore offers a promising balance of processability, strength and oxidation resistance for high-temperature static and rotating components.

cond-mat.mtrl-sci↗

Precipitate dissolution during deformation induced twin thickening in a CoNi-base superalloy subject to creep

The tensile creep performance of a polycrystalline Co/Ni-base superalloy with a multimodal gamma prime distribution has been examined at 800C and 300MPa. The rupture life of the alloy is comparable to that of RR1000 tested under similar conditions. Microstructural examination of the alloy after testing revealed the presence of continuous gamma prime precipitates and M23C6 carbides along the grain boundaries. Intragranularly, coarsening of the secondary gamma prime precipitates occurred at the expense of the fine tertiary gamma prime. Long planar deformation bands, free of gamma prime, were also observed to traverse individual grains ending in steps at the grain boundaries. Examination of the deformation bands confirmed that they were microtwins. Long sections of the microtwins examined were depleted of gamma prime stabilising elements across their entire width, suggesting that certain alloy compositions are susceptible to precipitate dissolution during twin thickening. A mechanism for the dissolution of the precipitates is suggested based on the Kolbe reordering mechanism.

cond-mat.mtrl-sci↗