arXiv subjects

Mark D. Ediger

Publications and source records attributed to Mark D. Ediger.

12 recordsLinked to original sources

arXiv2026

Accurate Evaluation of Nanoscale Spatiotemporal Dynamics with Electron Correlation Microscopy

Electron correlation microscopy (ECM) can measure materials dynamics with nanoscale spatial resolution from intensity correlation functions. However, adopting X-ray photon correlation spectroscopy (XPCS) normalization frameworks unchanged when calculating intensity correlations can introduce errors. Due to the constrained sampling volumes and larger speckle sizes in nanobeam electron diffraction, XPCS-style time-averaging and scattering-vector averaging introduce systematic artifacts, such as artificial anticorrelations or elevated baselines that lead to systematic errors in structural relaxation times and stretching exponents. This work presents physics-inspired, ECM-specific intensity normalizations over time- and azimuthal-averaged intensities of the first diffraction ring that limit those errors. The framework is validated using molecular dynamics simulations of a CuZr supercooled liquid to benchmark against the self intermediate scattering function, successfully reproducing relaxation times. When applied to experimental time-resolved 4D STEM datasets of a Pt57.5Cu14.7Ni5.3P22.5 nanowire, the method correctly identifies highly stable, unchanging nanoscale crystalline phases that were erroneously misclassified as relaxing domains by previous frameworks. Other previous ECM research is reevaluated in light of these observation. This robust approach establishes an artifact-free pathway for evaluating localized spatiotemporal relaxation behaviors.

cond-mat.mtrl-sci↗

arXiv2026

The structural relaxation time of a polymer glass during deformation

In order to determine the structural relaxation time of a polymer glass during deformation, a strain rate switching experiment is performed in the steady-state plastic flow regime. A lightly cross-linked poly (methyl methacrylate) (PMMA) glass was utilized, and simultaneously the segmental motion in the glass was quantified using an optical probe reorientation method. After the strain rate switch, a non-monotonic stress response is observed, consistent with previous work. The correlation time for segmental motion, in contrast, monotonically evolves towards a new steady-state, providing an unambiguous measurement of the structural relaxation time during deformation, which is found to be approximately equal to the segmental correlation time. The Chen-Schweizer model qualitatively predicts the changes in the segmental correlation time and the observed non-monotonic stress response. In addition, our experiments are reasonably consistent with the material time assumption used in polymer deformation modeling; in this approach, the response of a polymer glass to a large deformation is described by combining a linear-response model with a time-dependent segmental correlation time.

cond-mat.soft↗

arXiv2026

Generic behavior of ultrastability and anisotropic molecular packing in co-deposited organic semiconductor glass mixtures

Vapor-deposited glass mixtures of organic semiconductors commonly serve as active layers in organic electronic devices, whose lifetime and performance are strongly influenced by the stability and structure of these mixed glasses. Here, we study the stability and anisotropic molecular packing of six co-deposited organic semiconductor glass mixtures with 50:50 weight ratio, by differential scanning calorimetry and spectroscopic ellipsometry. We find that all six binary systems exhibit high kinetic stability and significantly reduced enthalpy relative to the corresponding liquid-cooled glassy mixtures (ultrastable behavior), even for systems where the glass transition temperatures of the components differ by more than 90 K. Furthermore, we demonstrate that the birefringence of a co-deposited glass mixture, a measure of its anisotropic packing, can be predicted from the birefringence of glasses of the two pure components. These results for stability and structure are expected to be applicable to other co-deposited organic semiconductor glass mixtures, so long as the two components mix well in the glass and individually can form ultrastable glasses. Therefore, our findings are significant for designing novel electronic devices with enhanced device lifetime and increased operational efficiency.

cond-mat.soft↗

arXiv2026

Physical aging of glasses of an organic semiconductor

All glasses, including organic semiconductor glasses, are non-equilibrium materials whose properties will change with time. This physical aging process is poorly understood for organic semiconductors, hindering the rational design of highly durable devices. In this study, we investigated the volume and enthalpy recovery processes in both thin films and bulk glasses of N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD). Our results revealed that volume recovery kinetics exhibit negligible dependence on film thickness for liquid-cooled TPD films between 400 nm and 100 nm. Additionally, the volume recovery process in TPD films was strongly coupled to the enthalpy recovery observed in bulk TPD glasses during annealing near the glass transition temperature. Remarkably, TPD films prepared by physical vapor deposition at room temperature demonstrated exceptional resistance to physical aging, with an aging rate approximately one order of magnitude lower than that of their liquid-cooled counterparts. These results not only enhance our understanding of the non-equilibrium dynamics in amorphous systems but also offer valuable insights for the design of next-generation organic devices with significantly improved stability and durability.

cond-mat.mtrl-sci↗

arXiv2026

Vapor-to-glass preparation of biaxially aligned organic semiconductors

Physical vapor deposition (PVD) provides a route to prepare highly stable and anisotropic organic glasses that are utilized in multi-layer structures such as organic light-emitting devices. While previous work has demonstrated that anisotropic glasses with uniaxial symmetry can be prepared by PVD, here, we prepare biaxially aligned glasses in which molecular orientation has a preferred in-plane direction. With the collective effect of the surface equilibration mechanism and template growth on an aligned substrate, macroscopic biaxial alignment is achieved in depositions as much as 180 K below the clearing point $T_{LC-iso}$ (and 50 K below the glass transition temperature $T_g$ ) with single-component disk-like (phenanthroperylene ester) and rod-like (itraconazole) mesogens. The preparation of biaxially aligned organic semiconductors adds a new dimension of structural control for vapor-deposited glasses and may enable polarized emission and in-plane control of charge mobility.

cond-mat.mtrl-sci↗

arXiv2026

Controlled component segregation in vapor-deposited organic semiconductor glass mixtures

Multicomponent vapor-deposited organic glasses are essential in organic electronic applications, but achieving controlled component segregation at the nano- and mesoscale remains a challenge, hindering the rational development of high-performance devices. In this study, we investigate binary organic semiconductor mixtures of TPD (N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine) and TCTA (Tris(4-carbazoyl-9-ylphenyl)amine). Despite being miscible in the bulk liquid state, the co-deposited glassy films of these two organic semiconductors exhibit a range of segregation behaviors, from homogenous to clearly phase-separated structures. We employed differential scanning calorimetry and resonant soft X-ray scattering (RSoXS) to study the component segregation behavior and used the National Institute of Standards and Technology RSoXS Simulation Suite, paired with Atomic Force Microscopy, to interpret the energy-dependent RSoXS spectra. Our results indicate that component segregation in co-deposited TPD-TCTA films is due to a kinetically-arrested nucleation-and-growth mechanism, in contrast to the segregation mechanism of a previously reported TPD-DO37 (disperse orange 37) mixture which is strongly immiscible in bulk. This work provides a demonstration of tunable molecular aggregation in organic semiconductor glasses, enabling access to a continuum of morphologies from homogeneously mixed to segregated phases.

cond-mat.mtrl-sci↗

arXiv2024

Initial Stages of Rejuvenation of Vapor-Deposited Glasses during Isothermal Annealing: Contrast Between Experiment and Simulation

Physical vapor deposition can prepare organic glasses with high kinetic stability. When heated, these glassy solids slowly transform into the supercooled liquid in a process known as rejuvenation. In this study, we anneal vapor-deposited glasses of methyl-m-toluate (MMT) for six hours at 0.98Tg to observe rejuvenation using dielectric spectroscopy. Glasses of moderate stability exhibited partial or full rejuvenation in six hours. For highly stable glasses, prepared at substrate temperatures of 0.85Tg and 0.80Tg, the six-hour annealing time is ~2% of the estimated transformation time, and no change in the onset temperature for the {\alpha} relaxation process was observed, as expected. Surprisingly, for these highly stable glasses, annealing resulted in significant increases in the storage component of the dielectric susceptibility, without corresponding increases in the loss component. These changes are interpreted to indicate that short-term annealing rejuvenates a high frequency relaxation (e.g., the boson peak) within the stable glass. We compare these results to computer simulations of the rejuvenation of highly stable glasses generated by the swap Monte Carlo algorithm. The in silico glasses, in contrast to the experiment, show no evidence of rejuvenation within the stable glass at times shorter than the alpha relaxation process.

cond-mat.soft↗

arXiv2024

Resonant soft X-ray scattering reveals hierarchical structure in a multi-component vapor-deposited glass

Multi-phase vapor-deposited glasses are an important class of materials for organic electronics, particularly organic photovoltaics and thermoelectrics. These blends are frequently regarded as molecular alloys and there have been few studies of their structure at nanometer scales. Here we show that a co-deposited system of TPD and Disperse Orange 37, two small molecule glass-formers, separates into compositionally distinct phases with a domain size and spacing that depends on substrate temperature during deposition. Domains rich in one of the two components become larger and more pure at higher deposition temperatures. We use resonant soft X-ray scattering (RSoXS) complemented with Atomic Force Microscopy (AFM) and photo-induced force microscopy (PiFM) to measure the phase separation, topography, and purity of the deposited films. A forward-simulation approach to RSoXS analysis, the National Institute of Standards and Technology (NIST) RSoXS Simulation Suite (NRSS), is used with models developed from AFM images to evaluate the energy dependence of scattering across multiple length scales and interpret the RSoXS with respect to structure within the films. We find that the RSoXS is sensitive to a hidden length scale of phase separation that is not apparent from the AFM characterization alone. We demonstrate that vacuum scattering, which is often ignored in RSoXS analysis, contributes significantly to the features and energy dependence of the RSoXS pattern, and then illustrate how to properly account for vacuum scattering to analyze films with significant roughness. We then use this analysis framework to understand structure development mechanisms that occur during vapor deposition of a TPD-DO37 co-deposited glass with results that outline paths to tune morphology in multi-component materials.

cond-mat.mtrl-sci↗

arXiv2023

Front propagation in ultrastable glasses is dynamically heterogeneous

Upon heating, ultrastable glassy films transform into liquids via a propagating equilibration front, resembling the heterogeneous melting of crystals. A microscopic understanding of this robust phenomenology is however lacking because experimental resolution is limited. We simulate the heterogeneous transformation kinetics of ultrastable configurations prepared using the swap Monte Carlo algorithm, thus allowing direct comparison with experiments. We resolve the liquid-glass interface both in space and time as well as the underlying particle motion responsible for its propagation. We perform a detailed statistical analysis of the interface geometry and kinetics over a broad range of temperatures. We show that the dynamic heterogeneity of the bulk liquid is passed on to the front which propagates heterogeneously in space and intermittently in time. This observation allows us to relate the averaged front velocity to the equilibrium diffusion coefficient of the liquid. We suggest that an experimental characterisation of the interface geometry during the heterogeneous devitrification of ultrastable glassy films would provide direct experimental access to the long-sought characteristic lengthscale of dynamic heterogeneity in bulk supercooled liquids.

cond-mat.stat-mech↗

arXiv2020

How to "measure" a structural relaxation time that is too long to be measured?

It has recently become possible to prepare ultrastable glassy materials characterised by structural relaxation times which vastly exceed the duration of any feasible experiment. Similarly, new algorithms have led to the production of ultrastable computer glasses. Is it possible to obtain a reliable estimate of a structural relaxation time that is too long to be measured? We review, organise, and critically discuss various methods to estimate very long relaxation times. We also perform computer simulations of three dimensional ultrastable hard spheres glasses to test and quantitatively compare some of these methods for a single model system. The various estimation methods disagree significantly and it is not yet clear how to accurately estimate extremely long relaxation times.

cond-mat.stat-mech↗

arXiv2015

Facets of glass physics

Glasses constitute a widespread form of solid matter, and glass production has been an important human technology for more than 3000 years. Despite that long history, new ways to understand the fundamental physics of glasses continue to emerge.

cond-mat.mtrl-sci↗

arXiv2013

Model Vapor-Deposited Glasses: Growth Front and Composition Effects

A growing body of experimental work indicates that physical vapor deposition provides an effective route for preparation of stable glasses, whose properties correspond in some cases to those expected for glasses that have been aged for thousands of years. In this work, model binary glasses are prepared in a process inspired by physical vapor deposition, in which particles are sequentially added to the free surface of a growing film. The resulting glasses are shown to be more stable than those prepared by gradual cooling from the liquid phase. However, it is also shown that the composition of the resulting glass, which is difficult to control in physical vapor deposition simulations of thin films, plays a significant role on the physical characteristics of the material. That composition dependence leads to a re- evaluation of previous results from simulations of thinner films than those considered here, where the equivalent age of the corresponding glasses was overestimated. The simulations presented in this work, which correspond to films that are approximately 38 molecular diameters thick, also enable analysis of the devitrification mechanism of vapor-deposited glasses. Consistent with experiments, it is found that this mechanism consists of a mobility front that propagates from the free interface into the interior of the films. Eliminating surface mobility eliminates this route of transformation into the supercooled liquid.

cond-mat.soft↗