arXiv subjects

Mark G. Bason

Publications and source records attributed to Mark G. Bason.

15 recordsLinked to original sources

arXiv2026

Technical Proposal for the Atom Interferometer CERN Experiment (AICE) Facility

We present the technical proposal for the Atom Interferometer CERN Experiment (AICE), a $\mathcal{O}(100)$ m vertical atom interferometer to be installed against the wall of the PX46 access shaft to the LHC. AICE is conceived as a versatile and flexible long-baseline atom-interferometry facility whose primary scientific goal is probing for bosonic ultralight dark matter (ULDM) in a mass range inaccessible to other experiments, with a secondary goal of pioneering the exploration of gravitational waves (GWs) with frequencies in the range ${\sim}$0.03-3 Hz as a pathfinder for future longer-baseline detectors. The initial configuration employs ultracold $^{87}$Sr atoms in a single-photon 698-nm interferometer with three shaft-based atom sources in a multi-source gradiometer geometry, supported by one surface reference source for laser stabilisation and diagnostics, to target scalar ULDM. Operation with $^{88}$Sr will give sensitivity to axion-like particles (ALPs), vector ULDM with $B-L$ couplings and violation of the principle of equivalence, while a $^{171}$Yb upgrade will improve the sensitivity to $B-L$ couplings and equivalence violations. Probing the Einstein equivalence principle (EP) and measuring $\alpha$ will proceed in parallel with the ULDM searches. A conceptual feasibility study and a detailed technical implementation study have established that PX46 is a uniquely mature and implementation-ready site, with no technical showstoppers. Completing site preparation works during LS3 would enable the subsequent installation and operation of AICE without impacting HL-LHC operations. The detector design builds on the VLBAI and MAGIS experiments and the AION-10 Technical Design Report, scaling the strontium gradiometer architecture to the $\sim$100 m baseline. AICE is endorsed by the TVLBAI Proto-Collaboration, comprising 57 institutions in 22 countries.

hep-ex↗

arXiv2026

Characterisation of a strontium cold atom source using fluorescence spectroscopy and time-of-flight

We demonstrate a characterisation methodology for a strontium atomic beam, produced by a two-dimensional magneto-optical trap and delivered via a resonant push beam, using fluorescence spectroscopy and time-of-flight (ToF). This provides insight into the beam characteristics of a cold atom source, allowing for direct measurement of the transverse velocity spread, longitudinal velocity distributions, divergence, and the capturable flux for further cooling. From the ToF measurements, we derive a series of flux-per-longitudinal-velocity distributions at varying push saturation parameters ($s_{\mathrm{push}}$) using both a unidirectional and counter-propagating resonant probe beam. A simulation-derived factor is applied to the unidirectional probe longitudinal velocity distribution to account for differences in the scattering rate scaling. The distributions are integrated up to an estimated 3D-MOT capture velocity of \SI{30}{\meter\per\second}. For our system, we find that at $s_{\mathrm{push}} = 0.45$, we obtain a flux of $(1.7 \pm 0.4)\times10^{8}$ atoms/s and $(1.5 \pm 0.4)\times10^{8}$ atoms/s, using a unidirectional probe beam and counter-propagating probe, respectively. These measurements provide a framework for characterising cold atomic sources for applications such as 3D MOT loading and atom interferometers.

physics.atom-ph↗

arXiv2026

A High-Flux Source of Cold Strontium with a Loading Rate of $4 \times 10^{10}$ atoms/s for Open Release

We present a high-flux source of cold strontium atoms based on a two-dimensional magneto-optical trap (2D MOT) and a Zeeman slower. We use the source to load a 3D MOT in a separate science chamber, observing a loading rate of $4 \times 10^{10}$ atoms/s -- to our knowledge, the highest reported loading flux for strontium. To characterise the vacuum pressure in the science chamber, we load the atoms into a magnetic trap and measure a lifetime of between 8 and 24 seconds, depending on oven temperature. Finally, we characterise the atom flux and velocity distributions from the oven and from the 2D MOT source, finding reasonable agreement with models in the free molecular flow regime. Our results show it is possible to readily produce a cold strontium flux at comparable levels to alkali species, at oven temperatures compatible with long-term operation, and at vacuum pressures suitable for state-of-the-art quantum experiments. We make our design available at no cost, to benefit researchers in the quantum community.

cond-mat.quant-gas↗

arXiv2024

Terrestrial Very-Long-Baseline Atom Interferometry: Summary of the Second Workshop

This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry community. It documents our concerted efforts to evaluate progress, address emerging challenges, and refine strategic directions for future large-scale atom interferometry projects. Our commitment to collaboration is manifested by the integration of diverse expertise and the coordination of international resources, all aimed at advancing the frontiers of atom interferometry physics and technology, as set out in a Memorandum of Understanding signed by over 50 institutions.

hep-ex↗

arXiv2024

A modular optically pumped magnetometer system

To address the demands in healthcare and industrial settings for spatially resolved magnetic imaging, we present a modular optically pumped magnetometer (OPM) system comprising a multi-sensor array of highly sensitive quantum magnetometers. This system is designed and built to facilitate fast prototyping and testing of new measurement schemes by enabling quick reconfiguration of the self-contained laser and sensor modules as well as allowing for the construction of various array layouts with a shared light source. The modularity of this system facilitates the development of methods for managing high-density arrays for magnetic imaging. The magnetometer sensitivity and bandwidth are first characterised in both individual channel and differential gradiometer configurations before testing in a real-world magnetoencephalography environment by measuring alpha rhythms from the brain of a human participant. We demonstrate the OPM system in a first-order axial gradiometer configuration with a magnetic field gradient sensitivity of 10 $\mathrm{fT/cm/\sqrt{Hz}}$. Bandwidths exceeding 200 Hz were achieved for two independent modules. The system's increased temporal resolution allows for the measurement of spinal cord signals, which we demonstrate by using phantom signal trials and comparing with an existing commercial sensor.

physics.atom-ph↗

arXiv2021

Non-invasive Current Density Imaging of Lithium-Ion Batteries

The rapid pace of replacing fossil fuel propelled transport by electric vehicles is critically dependent on high-performing, high energy density and efficient batteries. Optimal and safe use of existing battery cells and development of much-needed novel battery chemistries and geometries require a large range of diagnostic and monitoring tools. While structural and chemical information is readily extracted through a host of imaging techniques, non-invasive functional detection of interior battery processes remains limited. Here we introduce sensitive magnetometry performed outside the battery that reveals a battery cell's internal current distribution. As a key application, we use an array of sensors to image the magnetic field present under cycling of a pouch cell between charge states. We find good agreement between measured and modelled fields with sufficient resolution to detect percent-level deviations around areas of high current density. This opens the path towards rapid and reliable assessment throughout the battery life cycle, from battery development and manufacturing quality assurance to operational safety and optimised use.

physics.app-ph↗

arXiv2019

Manipulating magnetic fields in inaccessible regions by negative magnetic permeability

The control of magnetic fields underpins a wide variety of cutting-edge technologies, ranging from the guiding of micro-robots for medical applications to the trapping of atoms for quantum experiments. Relying on different arrangements of coils, these technologies demand advances in the manipulation of magnetic fields at a distance from the sources that generate them. Here, we present a strategy for remotely shaping magnetic fields based on active magnetic metamaterials with negative permeability and we theoretically and experimentally demonstrate the possibility of emulating and cancelling magnetic sources at distance. Our strategy provides magnetic field focusing deep into physically inaccessible volumes where neither sources of magnetic field nor magnetic materials can be placed.

physics.class-ph↗

arXiv2019

Spatially-selective in situ magnetometry of ultracold atomic clouds

We demonstrate novel implementations of high-precision optical magnetometers which allow for spatially-selective and spatially-resolved in situ measurements using cold atomic clouds. These are realised by using shaped dispersive probe beams combined with spatially-resolved balanced homodyne detection. Two magnetometer sequences are discussed: a vectorial magnetometer, which yields sensitivities two orders of magnitude better compared to a previous realisation and a Larmor magnetometer capable of measuring absolute magnetic fields. We characterise the dependence of single-shot precision on the size of the analysed region for the vectorial magnetometer and provide a lower bound for the measurement precision of magnetic field gradients for the Larmor magnetometer. Finally, we give an outlook on how dynamic trapping potentials combined with selective probing can be used to realise enhanced quantum simulations in quantum gas microscopes.

physics.atom-ph↗

arXiv2018

Dispersive detection of radio-frequency dressed states

We introduce a method to dispersively detect alkali atoms in radio-frequency dressed states. In particular, we use dressed detection to measure populations and population differences of atoms prepared in their clock states. Linear birefringence of the atomic medium enables atom number detection via polarisation homodyning, a form of common path interferometry. In order to achieve low technical noise levels, we perform optical sideband detection after adiabatic transformation of bare states into dressed states. The balanced homodyne signal then oscillates independently of field fluctuations at twice the dressing frequency, thus allowing for robust, phase-locked detection that circumvents low-frequency noise. Using probe pulses of two optical frequencies, we can detect both clock states simultaneously and obtain population difference as well as the total atom number. The scheme also allows for difference measurements by direct subtraction of the homodyne signals at the balanced detector, which should technically enable quantum noise limited measurements with prospects for the preparation of spin squeezed states. The method extends to other Zeeman sublevels and can be employed in a range of atomic clock schemes, atom interferometers, and other experiments using dressed atoms.

physics.atom-ph↗

arXiv2018

Remote optimization of an ultra-cold atoms experiment by experts and citizen scientists

We introduce a novel remote interface to control and optimize the experimental production of Bose-Einstein condensates (BECs) and find improved solutions using two distinct implementations. First, a team of theoreticians employed a Remote version of their dCRAB optimization algorithm (RedCRAB), and second a gamified interface allowed 600 citizen scientists from around the world to participate in real-time optimization. Quantitative studies of player search behavior demonstrated that they collectively engage in a combination of local and global search. This form of adaptive search prevents premature convergence by the explorative behavior of low-performing players while high-performing players locally refine their solutions. In addition, many successful citizen science games have relied on a problem representation that directly engaged the visual or experiential intuition of the players. Here we demonstrate that citizen scientists can also be successful in an entirely abstract problem visualization. This gives encouragement that a much wider range of challenges could potentially be open to gamification in the future.

physics.soc-ph↗

arXiv2018

Measurement-enhanced determination of BEC phase transitions

We demonstrate how dispersive atom number measurements during evaporative cooling can be used for enhanced determination of the parameter dependence of the transition to a Bose-Einstein condensate (BEC). In this way shot-to-shot fluctuations in initial conditions are detected and the information extracted per experimental realization is increased. We furthermore calibrate in-situ images from dispersive probing of a BEC with corresponding absorption images in time-of-flight. This allows for the determination of the transition point in a single experimental realization by applying multiple dispersive measurements. Finally, we explore the continuous probing of several consecutive phase transition crossings using the periodic addition of a focused "dimple" potential.

quant-ph↗

arXiv2016

A simple laser locking system based on a field-programmable gate array

Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable gate arrays, which have recently been utilized to develop such locking systems. We have developed a frequency stabilization system based on a field-programmable gate array, with emphasis on hardware simplicity, which offers a user-friendly alternative to commercial and previous home-built solutions. Frequency modulation, lock-in detection and a proportional-integral-derivative controller are programmed on the field-programmable gate array and only minimal additional components are required to frequency stabilize a laser. The locking system is administered from a host-computer which provides comprehensive, long-distance control through a versatile interface. Various measurements were performed to characterize the system. The linewidth of the locked laser was measured to be $0.7 \pm 0.1 \; \rm{MHz}$ with a settling time of $10 \; \rm{ms}$. The system can thus fully match laser systems currently in use for atom trapping and cooling applications.

physics.ins-det↗

arXiv2014

Single- and two-qubit quantum gates using superimposed optical lattice potentials

Steps towards implementing a collision based two-qubit gate in optical lattices have previously been realized by the parallel merging all pairs of atoms in a periodicity two superlattice. In contrast, we propose an architecture which allows for the merger of a selected qubit pair in a novel long-periodicity superlattice structure consisting of two optical lattices with close-lying periodicity. We numerically optimize the gate time and fidelity, including the effects on neighboring atoms, and in the presence of experimental sources of error. Furthermore, the superlattice architecture induces a differential hyperfine shift, allowing for single-qubit gates. The fastest possible single-qubit gate times, given a maximal tolerable rotation error on the remaining atoms at various values of the lattice wavelengths, are identified. We find that robust single- and two-qubit gates with gate times of a few 100~$μ$s and with error probabilities $\sim{}10^{-3}$ are possible.

quant-ph↗

arXiv2012

Cooperative excitation and many-body interactions in a cold Rydberg gas

The dipole blockade of Rydberg excitations is a hallmark of the strong interactions between atoms in these high-lying quantum states. One of the consequences of the dipole blockade is the suppression of fluctuations in the counting statistics of Rydberg excitations, of which some evidence has been found in previous experiments. Here we present experimental results on the dynamics and the counting statistics of Rydberg excitations of ultra-cold Rubidium atoms both on and off resonance, which exhibit sub- and super-Poissonian counting statistics, respectively. We compare our results with numerical simulations using a novel theoretical model based on Dicke states of Rydberg atoms including dipole-dipole interactions, finding good agreement between experiment and theory.

cond-mat.quant-gas↗

arXiv2011

High-fidelity quantum driving

The ability to accurately control a quantum system is a fundamental requirement in many areas of modern science such as quantum information processing and the coherent manipulation of molecular systems. It is usually necessary to realize these quantum manipulations in the shortest possible time in order to minimize decoherence, and with a large stability against fluctuations of the control parameters. While optimizing a protocol for speed leads to a natural lower bound in the form of the quantum speed limit rooted in the Heisenberg uncertainty principle, stability against parameter variations typically requires adiabatic following of the system. The ultimate goal in quantum control is to prepare a desired state with 100% fidelity. Here we experimentally implement optimal control schemes that achieve nearly perfect fidelity for a two-level quantum system realized with Bose-Einstein condensates in optical lattices. By suitably tailoring the time-dependence of the system's parameters, we transform an initial quantum state into a desired final state through a short-cut protocol reaching the maximum speed compatible with the laws of quantum mechanics. In the opposite limit we implement the recently proposed transitionless superadiabatic protocols, in which the system perfectly follows the instantaneous adiabatic ground state. We demonstrate that superadiabatic protocols are extremely robust against parameter variations, making them useful for practical applications.

quant-ph↗