arXiv subjects

Mark L. Brongersma

Publications and source records attributed to Mark L. Brongersma.

29 records · Page 2Linked to original sources

arXiv2021

Nonlocal metasurfaces for spectrally decoupled wavefront manipulation and eye tracking

Metasurface-based optical elements typically manipulate light waves by imparting space-variant changes in the amplitude and phase with a dense array of scattering nanostructures. The highly-localized and low optical-quality-factor (Q) modes of nanostructures are beneficial for wavefront-shaping as they afford quasi-local control over the electromagnetic fields. However, many emerging imaging, sensing, communication, display, and non-linear optics applications instead require flat, high-Q optical elements that provide notable energy storage and a much higher degree of spectral control over the wavefront. Here, we demonstrate high-Q, nonlocal metasurfaces with atomically-thin metasurface elements that offer notably enhanced light-matter interaction and fully-decoupled optical functions at different wavelengths. We illustrate a possible use of such a flat optic in eye tracking for eye-wear. Here, a metasurface patterned on a regular pair of eye-glasses provides an unperturbed view of the world across the visible spectrum and redirects near-infrared light to a camera to allow imaging of the eye.

physics.optics↗

arXiv2020

Electrical Tuning of Phase Change Antennas and Metasurfaces

The success of semiconductor electronics is built on the creation of compact, low-power switching elements that offer routing, logic, and memory functions. The availability of nanoscale optical switches could have a similarly transformative impact on the development of dynamic and programmable metasurfaces, optical neural networks, and quantum information processing. Phase change materials are uniquely suited to enable their creation as they offer high-speed electrical switching between amorphous and crystalline states with notably different optical properties. Their high refractive index has also been harnessed to fashion them into compact optical antennas. Here, we take the next important step by realizing electrically-switchable phase change antennas and metasurfaces that offer strong, reversible, non-volatile, multi-phase switching and spectral tuning of light scattering in the visible and near-infrared spectral ranges. Their successful implementation relies on a careful joint thermal and optical optimization of the antenna elements that comprise an Ag strip that simultaneously serves as a plasmonic resonator and a miniature heating stage.

physics.optics↗

arXiv2018

Efficient energy propagation through self-assembled gold nanoparticle chain waveguides

The strong interaction of light with metallic nanoparticles enables field confinement well below the diffraction limit. Plasmonic waveguides consisting of metal nanoparticle chains could be used for the propagation of energy or information on the nanoscale, but high losses have thus far impeded practical applications. Here we demonstrate that efficient waveguiding is possible through gold nanoparticle chains despite the high dissipative losses of gold. A DNA origami directed self-assembly of monocrystalline, spherical nanoparticles allows the interparticle spacing to be decreased to 2 nm or below, which gives rise to lower-energy plasmon resonance modes. Our simulations imply that these lower energy modes allow efficient waveguiding but collapse if interparticle gap sizes are increased. Individual waveguides are characterized with nanometer-resolution by electron energy loss spectroscopy, and directed propagation of energy towards a fluorescent nanodiamond and nanoscale energy conversion is shown by cathodoluminescence imaging spectroscopy on a single-device level. With this approach, micrometer-long propagation lengths might be achieved, enabling applications in information technology, sensing and quantum optics.

physics.optics↗

arXiv2017

Silicon Mie Resonators for Highly Directional Light Emission from monolayer MoS2

Controlling light emission from quantum emitters has important applications ranging from solid-state lighting and displays to nanoscale single-photon sources. Optical antennas have emerged as promising tools to achieve such control right at the location of the emitter, without the need for bulky, external optics. Semiconductor nanoantennas are particularly practical for this purpose because simple geometries, such as wires and spheres, support multiple, degenerate optical resonances. Here, we start by modifying Mie scattering theory developed for plane wave illumination to describe scattering of dipole emission. We then use this theory and experiments to demonstrate several pathways to achieve control over the directionality, polarization state, and spectral emission that rely on a coherent coupling of an emitting dipole to optical resonances of a Si nanowire. A forward-to-backward ratio of 20 was demonstrated for the electric dipole emission at 680 nm from a monolayer MoS2 by optically coupling it to a Si nanowire.

physics.optics↗

arXiv2017

Optical emission near a high-impedance mirror

Solid state light emitters rely on metallic contacts with high sheet-conductivity for effective charge injection. Unfortunately, such contacts also support surface plasmon polariton (SPP) excitations that dissipate optical energy into the metal and limit the external quantum efficiency. Here, inspired by the concept of radio-frequency (RF) high-impedance surfaces and their use in conformal antennas we illustrate how electrodes can be nanopatterned to simultaneously provide a high DC electrical conductivity and high-impedance at optical frequencies. Such electrodes do not support SPPs across the visible spectrum and greatly suppress dissipative losses while facilitating a desirable Lambertian emission profile. We verify this concept by studying the emission enhancement and photoluminescence lifetime for a dye emitter layer deposited on the electrodes.

physics.optics↗

arXiv2015

Probing the Electrical Switching of a Memristive Optical Antenna by STEM EELS

The scaling of active photonic devices to deep-submicron length-scales has been hampered by the fundamental diffraction limit and the absence of materials with sufficiently strong electro-optic effects. Here, we demonstrate a solid state electro-optical switching mechanism that can operate in the visible spectral range with an unparalleled active volume of less than 5 nm cube, comparable to the size of the smallest electronic components. The switching mechanism relies on electrochemically displacing metal atoms inside the nanometer-scale gap to electrically connect two crossed metallic wires forming a crosspoint junction. Such junctions afford extreme light concentration and display singular optical behavior upon formation of a conductive channel. We illustrate how this effect can be used to actively tune the resonances of plasmonic antennas. The tuning mechanism is analyzed using a combination of electrical and optical measurements as well as electron energy loss (EELS) in a scanning transmission electron microscope (STEM).

cond-mat.mtrl-sci↗

arXiv2014

A Nanomembrane-Based Bandgap-Tunable Germanium Microdisk Using Lithographically-Customizable Biaxial Strain for Silicon-Compatible Optoelectronics

Strain engineering has proven to be vital for germanium-based photonics, in particular light emission. However, applying a large permanent biaxial strain to germanium has been a challenge. We present a simple, CMOS-compatible technique to conveniently induce a large, spatially homogenous strain in microdisks patterned within ultrathin germanium nanomembranes. Our technique works by concentrating and amplifying a pre-existing small strain into the microdisk region. Biaxial strains as large as 1.11% are observed by Raman spectroscopy and are further confirmed by photoluminescence measurements, which show enhanced and redshifted light emission from the strained microdisks. Our technique allows the amount of biaxial strain to be customized lithographically, allowing the bandgaps of different microdisks to be independently tuned in a single mask process. Our theoretical calculations show that this platform can deliver substantial performance improvements, including a >200x reduction in the lasing threshold, to biaxially strained germanium lasers for silicon-compatible optical interconnects.

physics.optics↗

arXiv2014

Electrically Tunable Optical Absorption in a Graphene-based Salisbury Screen

We demonstrate a graphene-based Salisbury screen consisting of a single layer of graphene placed in close proximity to a gold back reflector. The light absorption in the screen can be actively tuned by electrically gating the carrier density in the graphene layer with an ionic liquid/gel. The screen was designed to achieve maximum absorption at a target wavelength of 3.2 micrometer by using a 600 nm-thick, non-absorbing silica spacer layer. Spectroscopic reflectance measurements were performed in-situ as a function of gate bias. The changes in the reflectance spectra were analyzed using a Fresnel based transfer matrix model in which graphene was treated as an infinitesimally thin sheet with conductivity given by the Kubo formula. Temporal coupled mode theory was employed to analyze and intuitively understand the observed absorption changes in the Salisbury screen. We achieved ~ 6 % change in the optical absorption of graphene by tuning the applied gate bias from 0.8 V to 2.6 V, where 0.8 V corresponds to graphene's charge neutrality point.

cond-mat.mes-hall↗

arXiv2013

Near field radiative thermal transfer between nano-structured periodic materials

This paper provides a method based on rigorous coupled wave analysis for the calculation of the radiative thermal capacitance between a layer that is patterned with arbitrary, periodically repeating features and a planar one. This method is applied to study binary gratings and arrays of beams with a rectangular cross section. The effects of the structure size and spacing on the thermal capacitance are investigated. In all of these calculations, a comparison is made with an effective medium theory which becomes increasingly accurate as the structure sizes fall well below the relevant resonance wavelength. Results show that new levels of control over the magnitude and spectral contributions to thermal capacitance can be achieved with corrugated structures relative to planar ones.

physics.comp-ph↗

arXiv2011

Tensile-Strained Germanium-on-Insulator Substrate Fabrication for Silicon-Compatible Optoelectronics

We present a method to fabricate tensile-strained germanium-on-insulator (GOI) substrates using heteroepitaxy and layer transfer techniques. The motivation is to obtain a high-quality wafer-scale GOI platform suitable for silicon-compatible optoelectronic device fabrication. Crystal quality is assessed using X-Ray Diffraction (XRD) and Transmission Electron Microscopy. A biaxial tensile film strain of 0.16% is verified by XRD. Suitability for device manufacturing is demonstrated through fabrication and characterization of metal-semiconductor-metal photodetectors that exhibit photoresponse beyond 1.55 μm. The substrate fabrication process is compatible with complementary metal-oxide-semiconductor manufacturing and represents a potential route to wafer-scale integration of silicon-compatible optoelectronics.

physics.optics↗

arXiv2009

Solving dielectric and plasmonic waveguide dispersion relations with a pocket calculator

We present a robust iterative technique for solving complex transcendental dispersion equations routinely encountered in integrated optics. Our method especially befits the multilayer dielectric and plasmonic waveguides forming the basis structures for a host of contemporary nanophotonic devices. The solution algorithm ports seamlessly from the real to the complex domain--i.e., no extra complexity results when dealing with leaky structures or those with material/metal loss. Unlike several existing numerical approaches, our algorithm exhibits markedly-reduced sensitivity to the initial guess and allows for straightforward implementation on a pocket calculator.

physics.optics↗