arXiv subjects

Marko Vukolić

Publications and source records attributed to Marko Vukolić.

13 recordsLinked to original sources

arXiv2026

Bitcoin-IPC: Scaling Bitcoin with a Network of Proof-of-Stake Subnets

This paper introduces Bitcoin-IPC, a protocol that scales Bitcoin through a network of permissionless, interconnected, programmable Proof-of-Stake (PoS) Layer-2 chains, called subnets, whose stake is denominated in L1 BTC. These subnets rely on Bitcoin L1 for the communication of critical information, settlement, and security. Subnets can communicate with each other and with Bitcoin: users deposit BTC from Bitcoin to a subnet and withdraw it back, and transfer wBTC directly between subnets. We provide formal definitions of these bridge protocols, incorporating a firewall property that limits the impact of malicious subnets on the security of the broader network. Our design, inspired by SWIFT messaging and embedded within Bitcoin's SegWit mechanism, enables seamless value transfer across L2 subnets. Uniquely, this mechanism reduces the virtual-byte cost per transaction (vB/tx) by up to 23x, compared to transacting natively on Bitcoin L1, effectively increasing monetary-transaction throughput from 7 tps to over 160 tps, without requiring any modifications to Bitcoin L1.

cs.DC↗

arXiv2023

Security Analysis of Filecoin's Expected Consensus in the Byzantine vs Honest Model

Filecoin is the largest storage-based open-source blockchain, both by storage capacity (>11EiB) and market capitalization. This paper provides the first formal security analysis of Filecoin's consensus (ordering) protocol, Expected Consensus (EC). Specifically, we show that EC is secure against an arbitrary adversary that controls a fraction $β$ of the total storage for $βm< 1- e^{-(1-β)m}$, where $m$ is a parameter that corresponds to the expected number of blocks per round, currently $m=5$ in Filecoin. We then present an attack, the $n$-split attack, where an adversary splits the honest miners between multiple chains, and show that it is successful for $βm \ge 1- e^{-(1-β)m}$, thus proving that $βm= 1- e^{-(1-β)m}$ is the tight security threshold of EC. This corresponds roughly to an adversary with $20\%$ of the total storage pledged to the chain. Finally, we propose two improvements to EC security that would increase this threshold. One of these two fixes is being implemented as a Filecoin Improvement Proposal (FIP).

cs.CR↗

arXiv2022

Pikachu: Securing PoS Blockchains from Long-Range Attacks by Checkpointing into Bitcoin PoW using Taproot

Blockchain systems based on a reusable resource, such as proof-of-stake (PoS), provide weaker security guarantees than those based on proof-of-work. Specifically, they are vulnerable to long-range attacks, where an adversary can corrupt prior participants in order to rewrite the full history of the chain. To prevent this attack on a PoS chain, we propose a protocol that checkpoints the state of the PoS chain to a proof-of-work blockchain such as Bitcoin. Our checkpointing protocol hence does not rely on any central authority. Our work uses Schnorr signatures and leverages Bitcoin recent Taproot upgrade, allowing us to create a checkpointing transaction of constant size. We argue for the security of our protocol and present an open-source implementation that was tested on the Bitcoin testnet.

cs.CR↗

arXiv2022

State-Machine Replication Scalability Made Simple (Extended Version)

Consensus, state-machine replication (SMR) and total order broadcast (TOB) protocols are notorious for being poorly scalable with the number of participating nodes. Despite the recent race to reduce overall message complexity of leader-driven SMR/TOB protocols, scalability remains poor and the throughput is typically inversely proportional to the number of nodes. We present Insanely Scalable State-Machine Replication, a generic construction to turn leader-driven protocols into scalable multi-leader ones. For our scalable SMR construction we use a novel primitive called Sequenced (Total Order) Broadcast (SB) which we wrap around PBFT, HotStuff and Raft leader-driven protocols to make them scale. Our construction is general enough to accommodate most leader-driven ordering protocols (BFT or CFT) and make them scale. Our implementation improves the peak throughput of PBFT, HotStuff, and Raft by 37x, 56x, and 55x, respectively, at a scale of 128 nodes.

cs.DC↗

arXiv2021

BMS: Secure Decentralized Reconfiguration for Blockchain and BFT Systems

Reconfiguration of long-lived blockchain and Byzantine fault-tolerant (BFT) systems poses fundamental security challenges. In case of state-of-the-art Proof-of-Stake (PoS) blockchains, stake reconfiguration enables so-called long-range attacks, which can lead to forks. Similarly, permissioned blockchain systems, typically based on BFT, reconfigure internally, which makes them susceptible to a similar "I still work here" attack. In this work, we propose BMS (Blockchain/BFT Membership Service) offering a secure and dynamic reconfiguration service for BFT and blockchain systems, preventing long-range and similar attacks. In particular: (1) we propose a root BMS for permissioned blockchains, implemented as an Ethereum smart contract and evaluate it reconfiguring the recently proposed Mir-BFT protocol, (2) we discuss how our BMS extends to PoS blockchains and how it can reduce PoS stake unbonding time from weeks/months to the order of minutes, and (3) we discuss possible extensions of BMS to hierarchical deployments as well as to multiple root BMSs.

cs.CR↗

arXiv2021

Mir-BFT: High-Throughput Robust BFT for Decentralized Networks

This paper presents Mir-BFT, a robust Byzantine fault-tolerant (BFT) total order broadcast protocol aimed at maximizing throughput on wide-area networks (WANs), targeting deployments in decentralized networks, such as permissioned and Proof-of-Stake permissionless blockchain systems. Mir-BFT is the first BFT protocol that allows multiple leaders to propose request batches independently (i.e., parallel leaders), in a way that precludes request duplication attacks by malicious (Byzantine) clients, by rotating the assignment of a partitioned request hash space to leaders. As this mechanism removes a single-leader bandwidth bottleneck and exposes a computation bottleneck related to authenticating clients even on a WAN, our protocol further boosts throughput using a client signature verification sharding optimization. Our evaluation shows that Mir-BFT outperforms state-of-the-art and orders more than 60000 signed Bitcoin-sized (500-byte) transactions per second on a widely distributed 100 nodes, 1 Gbps WAN setup, with typical latencies of few seconds. We also evaluate Mir-BFT under different crash and Byzantine faults, demonstrating its performance robustness. Mir-BFT relies on classical BFT protocol constructs, which simplifies reasoning about its correctness. Specifically, Mir-BFT is a generalization of the celebrated and scrutinized PBFT protocol. In a nutshell, Mir-BFT follows PBFT "safety-wise", with changes needed to accommodate novel features restricted to PBFT liveness.

cs.DC↗

arXiv2020

StreamChain: Rethinking Blockchain for Datacenters

Permissioned blockchains promise secure decentralized data management in business-to-business use-cases. In contrast to Bitcoin and similar public blockchains which rely on Proof-of-Work for consensus and are deployed on thousands of geo-distributed nodes, business-to-business use-cases (such as supply chain management and banking) require significantly fewer nodes, cheaper consensus, and are often deployed in datacenter-like environments with fast networking. However, permissioned blockchains often follow the architectural thinkining behind their WAN-oriented public relatives, which results in end-to-end latencies several orders of magnitude higher than necessary. In this work, we propose StreamChain, a permissioned blockchain design that eliminates blocks in favor of processing transactions in a streaming fashion. This results in a drastically lower latency without reducing throughput or forfeiting reliability and security guarantees. To demonstrate the wide applicability of our design, we prototype StreamChain based on the Hyperledger Fabric, and show that it delivers latency two orders of magnitude lower than Fabric, while sustaining similar throughput. This performance makes StreamChain a potential alternative to traditional databases and, thanks to its streaming paradigm, enables further research around reducing latency through relying on modern hardware in datacenters.

cs.DC↗

arXiv2018

Hyperledger Fabric: A Distributed Operating System for Permissioned Blockchains

Fabric is a modular and extensible open-source system for deploying and operating permissioned blockchains and one of the Hyperledger projects hosted by the Linux Foundation (www.hyperledger.org). Fabric is the first truly extensible blockchain system for running distributed applications. It supports modular consensus protocols, which allows the system to be tailored to particular use cases and trust models. Fabric is also the first blockchain system that runs distributed applications written in standard, general-purpose programming languages, without systemic dependency on a native cryptocurrency. This stands in sharp contrast to existing blockchain platforms that require "smart-contracts" to be written in domain-specific languages or rely on a cryptocurrency. Fabric realizes the permissioned model using a portable notion of membership, which may be integrated with industry-standard identity management. To support such flexibility, Fabric introduces an entirely novel blockchain design and revamps the way blockchains cope with non-determinism, resource exhaustion, and performance attacks. This paper describes Fabric, its architecture, the rationale behind various design decisions, its most prominent implementation aspects, as well as its distributed application programming model. We further evaluate Fabric by implementing and benchmarking a Bitcoin-inspired digital currency. We show that Fabric achieves end-to-end throughput of more than 3500 transactions per second in certain popular deployment configurations, with sub-second latency, scaling well to over 100 peers.

cs.DC↗

arXiv2017

A Byzantine Fault-Tolerant Ordering Service for the Hyperledger Fabric Blockchain Platform

Hyperledger Fabric (HLF) is a flexible permissioned blockchain platform designed for business applications beyond the basic digital coin addressed by Bitcoin and other existing networks. A key property of HLF is its extensibility, and in particular the support for multiple ordering services for building the blockchain. Nonetheless, the version 1.0 was launched in early 2017 without an implementation of a Byzantine fault-tolerant (BFT) ordering service. To overcome this limitation, we designed, implemented, and evaluated a BFT ordering service for HLF on top of the BFT-SMaRt state machine replication/consensus library, implementing also optimizations for wide-area deployment. Our results show that HLF with our ordering service can achieve up to ten thousand transactions per second and write a transaction irrevocably in the blockchain in half a second, even with peers spread in different continents.

cs.CR↗

arXiv2017

Blockchain Consensus Protocols in the Wild

A blockchain is a distributed ledger for recording transactions, maintained by many nodes without central authority through a distributed cryptographic protocol. All nodes validate the information to be appended to the blockchain, and a consensus protocol ensures that the nodes agree on a unique order in which entries are appended. Consensus protocols for tolerating Byzantine faults have received renewed attention because they also address blockchain systems. This work discusses the process of assessing and gaining confidence in the resilience of a consensus protocols exposed to faults and adversarial nodes. We advocate to follow the established practice in cryptography and computer security, relying on public reviews, detailed models, and formal proofs; the designers of several practical systems appear to be unaware of this. Moreover, we review the consensus protocols in some prominent permissioned blockchain platforms with respect to their fault models and resilience against attacks. The protocol comparison covers Hyperledger Fabric, Tendermint, Symbiont, R3~Corda, Iroha, Kadena, Chain, Quorum, MultiChain, Sawtooth Lake, Ripple, Stellar, and IOTA.

cs.DC↗

arXiv2016

Non-determinism in Byzantine Fault-Tolerant Replication

Service replication distributes an application over many processes for tolerating faults, attacks, and misbehavior among a subset of the processes. The established state-machine replication paradigm inherently requires the application to be deterministic. This paper distinguishes three models for dealing with non-determinism in replicated services, where some processes are subject to faults and arbitrary behavior (so-called Byzantine faults): first, a modular approach that does not require any changes to the potentially non-deterministic application (and neither access to its internal data); second, a master-slave approach, in which ties are broken by a leader and the other processes validate the choices of the leader; and finally, a treatment of applications that use cryptography and secret keys. Cryptographic operations and secrets must be treated specially because they require strong randomness to satisfy their goals. The paper also introduces two new protocols. The first uses the modular approach for filtering out non-de\-ter\-min\-istic operations in an application. It ensures that all correct processes produce the same outputs and that their internal states do not diverge. The second protocol implements cryptographically secure randomness generation with a verifiable random function and is appropriate for certain security models. All protocols are described in a generic way and do not assume a particular implementation of the underlying consensus primitive.

cs.DC↗

arXiv2016

XFT: Practical Fault Tolerance Beyond Crashes

Despite years of intensive research, Byzantine fault-tolerant (BFT) systems have not yet been adopted in practice. This is due to additional cost of BFT in terms of resources, protocol complexity and performance, compared with crash fault-tolerance (CFT). This overhead of BFT comes from the assumption of a powerful adversary that can fully control not only the Byzantine faulty machines, but at the same time also the message delivery schedule across the entire network, effectively inducing communication asynchrony and partitioning otherwise correct machines at will. To many practitioners, however, such strong attacks appear irrelevant. In this paper, we introduce cross fault tolerance or XFT, a novel approach to building reliable and secure distributed systems and apply it to the classical state-machine replication (SMR) problem. In short, an XFT SMR protocol provides the reliability guarantees of widely used asynchronous CFT SMR protocols such as Paxos and Raft, but also tolerates Byzantine faults in combination with network asynchrony, as long as a majority of replicas are correct and communicate synchronously. This allows the development of XFT systems at the price of CFT (already paid for in practice), yet with strictly stronger resilience than CFT --- sometimes even stronger than BFT itself. As a showcase for XFT, we present XPaxos, the first XFT SMR protocol, and deploy it in a geo-replicated setting. Although it offers much stronger resilience than CFT SMR at no extra resource cost, the performance of XPaxos matches that of the state-of-the-art CFT protocols.

cs.DC↗

arXiv2016

Consistency in Non-Transactional Distributed Storage Systems

Over the years, different meanings have been associated to the word consistency in the distributed systems community. While in the '80s "consistency" typically meant strong consistency, later defined also as linearizability, in recent years, with the advent of highly available and scalable systems, the notion of "consistency" has been at the same time both weakened and blurred. In this paper we aim to fill the void in literature, by providing a structured and comprehensive overview of different consistency notions that appeared in distributed systems, and in particular storage systems research, in the last four decades. We overview more than 50 different consistency notions, ranging from linearizability to eventual and weak consistency, defining precisely many of these, in particular where the previous definitions were ambiguous. We further provide a partial order among different consistency predicates, ordering them by their semantic "strength", which we believe will reveal useful in future research. Finally, we map the consistency semantics to different practical systems and research prototypes. The scope of this paper is restricted to non-transactional semantics, i.e., those that apply to single storage object operations. As such, our paper complements the existing surveys done in the context of transactional, database consistency semantics.

cs.DC↗