arXiv subjects

Markus Gusenbauer

Publications and source records attributed to Markus Gusenbauer.

At least 19 recordsLinked to original sources

arXiv2026

Tailoring the material properties, nanostructure and grain alignment of Alnico magnets through micromagnetic simulations

Alnico magnets have gained renewed interest in the search for rare-earth free permanent magnets due to their high thermal stability and magnetisation. However, the limited coercivity of these shape-anisotropy-based alloys constrains their performance. Starting from a reference Alnico sample, we realised a finite elements micromagnetic study of exchange-decoupled rods by varying their dimensions and interrod spacing across those observed experimentally. We computed the hysteresis properties by progressing from micromagnetic simulations of a small number of rods within the magnetostatic field of their neighbours to large systems treated statistically based on the distribution of orientations of the grains. We compared the coercivity of an isolated rod with that of the exchange-decoupled system to highlight the effect of magnetostatic interactions. We computed analytically the stray field acting on a single rod as a consequence of its surrounding rods in order to confirm the scaling of the coercivity with the packing fraction p. We explored how intrinsic material properties influence magnetic behaviour by examining materials with different magnetocrystalline anisotropy constants and saturation polarisation values. Results from several hundred simulations were used to train a multi-layer perceptron regressor and predict the magnetic properties as function of the dimensions of the rods, interrod spacing and orientation of the grains. With this approach, we highlight the underlying trends by which nanoscale structuring, intrinsic material properties and grain alignment can be tailored to improve the magnetic properties of Alnico alloys.

cond-mat.mtrl-sci↗

arXiv2025

Graph Neural Networks to Predict Coercivity of Hard Magnetic Microstructures

Graph neural networks (GNN) are a promising tool to predict magnetic properties of large multi-grain structures, which can speed up the search for rare-earth free permanent magnets. In this paper, we use our magnetic simulation data to train a GNN to predict coercivity of hard magnetic microstructures. We evaluate the performance of the trained GNN and quantify its uncertainty. Subsequently, we reuse the GNN architecture for predicting the maximum energy product. Out-of-distribution predictions of coercivity are also performed, following feature engineering based on the observed dependence of coercivity on system size.

physics.comp-ph↗

arXiv2025

Modeling liquid-mediated interactions for close-to-substrate magnetic microparticle transport in dynamic magnetic field landscapes

Understanding the on-chip motion of magnetic particles in a microfluidic environment is key to realizing magnetic particle-based Lab-on-a-chip systems for medical diagnostics. In this work, a simulation model is established to quantify the trajectory of a single particle moving close to a polymer surface in a quiescent liquid. The simulations include hydrodynamic, magnetostatic, and Derjaguin-Landau-Verwey-Overbeek (DLVO) interactions. They are applied to particle motion driven by a dynamically changing magnetic field landscape created by engineered parallel-stripe magnetic domains superposed by a homogeneous, time-varying external magnetic field. The simulation model is adapted to experiments in terms of fluid-particle interactions with the magnetic field landscape approximated by analytic equations under the assumption of surface charges. Varying simulation parameters, we especially clarify the impact of liquid-mediated DLVO interactions, which are essential for diagnostic applications, on the 3D trajectory of the particle. A comparison to experimental results validates our simulation approach.

physics.flu-dyn↗

arXiv2025

Effect of interface on magnetic exchange coupling in Co/Ru/Co trilayer: from ab-initio simulations to micromagnetics

Interfaces play a substantial role for the functional properties of structured magnetic materials and magnetic multilayers. Modeling the functional behavior of magnetic materials requires the treatment of the relevant phenomena at the device level. Properties predicted from the electronic structure and spin dynamics at the atomistic level have to be properly transferred into a continuum level treatment. In this work we show how Co/Ru/Co three layers can be simulated with the continuum theory of micromagnetism, with interface coupling energies and bulk intrinsic properties properly derived from the results of \emph{ab initio} and spin dynamics simulations at different temperatures.

cond-mat.mtrl-sci↗

arXiv2022

Description of collective magnetization processes with machine learning models

This work introduces a latent space method to calculate the demagnetization reversal process of multigrain permanent magnets. The algorithm consists of two deep learning models based on neural networks. The embedded Stoner-Wohlfarth method is used as a reduced order model for computing samples to train and test the machine learning approach. The work is a proof of concept of the method since the used microstructures are simple and the only varying parameters are the magnetic anisotropy axes of the hard magnetic grains. A convolutional autoencoder is used for nonlinear dimensionality reduction, in order to reduce the required amount of training samples for predicting the hysteresis loops. We enriched the loss function with physical information about the underlying problem which increases the accuracy of the machine learning approach. A deep learning regressor is operating in the latent space of the autoencoder. The predictor takes a series of previously encoded magnetization states and outputs the next magnetization state along the hysteresis curve. To predict the complete demagnetization loop, we apply a recursive learning scheme.

physics.comp-ph↗

arXiv2022

Exploring the hysteresis properties of nanocrystalline permanent magnets using deep learning

We demonstrate the use of model order reduction and neural networks for estimating the hysteresis properties of nanocrystalline permanent magnets from microstructure. With a data-driven approach, we learn the demagnetization curve from data-sets created by grain growth and micromagnetic simulations. We show that the granular structure of a magnet can be encoded within a low-dimensional latent space. Latent codes are constructed using a variational autoencoder. The mapping of structure code to hysteresis properties is a multi-target regression problem. We apply deep neural network and use parameter sharing, in order to predict anchor points along the demagnetization curves from the magnet's structure code. The method is applied to study the magnetic properties of nanocrystalline permanent magnets. We show how new grain structures can be generated by interpolation between two points in the latent space and how the magnetic properties of the resulting magnets can be predicted.

cond-mat.mtrl-sci↗

arXiv2021

Full-Spin-Wave-Scaled Finite Element Stochastic Micromagnetism: Mesh-Independent FUSSS LLG Simulations of Ferromagnetic Resonance and Reversal

In this paper, we address the problem that standard stochastic Landau-Lifshitz-Gilbert (sLLG) simulations typically produce results that show unphysical mesh-size dependence. The root cause of this problem is that the effects of spin wave fluctuations are ignored in sLLG. We propose to represent the effect of these fluctuations by a "FUll-Spinwave-Scaled Stochastic LLG", or FUSSS LLG method. In FUSSS LLG, the intrinsic parameters of the sLLG simulations are first scaled by scaling factors that integrate out the spin wave fluctuations up to the mesh size, and the sLLG simulation is then performed with these scaled parameters. We developed FUSSS LLG by studying the Ferromagnetic Resonance (FMR) in Nd$_2$Fe$_{14}$B cubes. The nominal scaling greatly reduced the mesh size dependence relative to sLLG. We further discovered that adjusting one scaling exponent by less than 10% delivered fully mesh-size-independent results for the FMR peak. We then performed three tests and validations of our FUSSS LLG with this modified scaling. 1) We studied the same FMR but with magnetostatic fields included. 2) We simulated the total magnetization of the Nd$_2$Fe$_{14}$B cube. 3) We studied the effective, temperature- and sweeping rate-dependent coercive field of the cubes. In all three cases we found that FUSSS LLG delivered essentially mesh-size-independent results, which tracked the theoretical expectations better than unscaled sLLG. Motivated by these successful validations, we propose that FUSSS LLG provides marked, qualitative progress towards accurate, high precision modeling of micromagnetics in hard, permanent magnets.

physics.comp-ph↗

arXiv2021

Magnetostatics and micromagnetics with physics informed neural networks

Partial differential equations and variational problems can be solved with physics informed neural networks (PINNs). The unknown field is approximated with neural networks. Minimizing the residuals of the static Maxwell equation at collocation points or the magnetostatic energy, the weights of the neural network are adjusted so that the neural network solution approximates the magnetic vector potential. This way, the magnetic flux density for a given magnetization distribution can be estimated. With the magnetization as an additional unknown, inverse magnetostatic problems can be solved. Augmenting the magnetostatic energy with additional energy terms, micromagnetic problems can be solved. We demonstrate the use of physics informed neural networks for solving magnetostatic problems, computing the magnetization for inverse problems, and calculating the demagnetization curves for two-dimensional geometries.

cond-mat.mtrl-sci↗

arXiv2021

Conditional physics informed neural networks

We introduce conditional PINNs (physics informed neural networks) for estimating the solution of classes of eigenvalue problems. The concept of PINNs is expanded to learn not only the solution of one particular differential equation but the solutions to a class of problems. We demonstrate this idea by estimating the coercive field of permanent magnets which depends on the width and strength of local defects. When the neural network incorporates the physics of magnetization reversal, training can be achieved in an unsupervised way. There is no need to generate labeled training data. The presented test cases have been rigorously studied in the past. Thus, a detailed and easy comparison with analytical solutions is made. We show that a single deep neural network can learn the solution of partial differential equations for an entire class of problems.

cs.LG↗

arXiv2019

Extracting local switching fields in permanent magnets using machine learning

Microstructural features play an important role for the quality of permanent magnets. The coercivity is greatly influenced by crystallographic defects, which is well known for MnAl-C, for example. In this work we show a direct link of microstructural features to the local coercivity of MnAl-C grains by machine learning. A large number of micromagnetic simulations is performed directly from Electron Backscatter Diffraction (EBSD) data using an automated meshing, modeling and simulation procedure. Decision trees are trained with the simulation results and predict local switching fields from new microscopic data within seconds.

physics.comp-ph↗

arXiv2019

Micromagnetics of rare-earth efficient permanent magnets

The development of permanent magnets containing less or no rare-earth elements is linked to profound knowledge of the coercivity mechanism. Prerequisites for a promising permanent magnet material are a high spontaneous magnetization and a sufficiently high magnetic anisotropy. In addition to the intrinsic magnetic properties the microstructure of the magnet plays a significant role in establishing coercivity. The influence of the microstructure on coercivity, remanence, and energy density product can be understood by {using} micromagnetic simulations. With advances in computer hardware and numerical methods, hysteresis curves of magnets can be computed quickly so that the simulations can readily provide guidance for the development of permanent magnets. The potential of rare-earth reduced and free permanent magnets is investigated using micromagnetic simulations. The results show excellent hard magnetic properties can be achieved in grain boundary engineered NdFeB, rare-earth magnets with a ThMn12 structure, Co-based nano-wires, and L10-FeNi provided that the magnet's microstructure is optimized.

cond-mat.mtrl-sci↗

arXiv2019

Learning magnetization dynamics

Deep neural networks are used to model the magnetization dynamics in magnetic thin film elements. The magnetic states of a thin film element can be represented in a low dimensional space. With convolutional autoencoders a compression ratio of 1024:1 was achieved. Time integration can be performed in the latent space with a second network which was trained by solutions of the Landau-Lifshitz-Gilbert equation. Thus the magnetic response to an external field can be computed quickly.

cond-mat.mtrl-sci↗

arXiv2018

Magnetic microstructure machine learning analysis

We use a machine learning approach to identify the importance of microstructure characteristics in causing magnetization reversal in ideally structured large-grained Nd$_2$Fe$_{14}$B permanent magnets. The embedded Stoner-Wohlfarth method is used as a reduced order model for determining local switching field maps which guide the data-driven learning procedure. The predictor model is a random forest classifier which we validate by comparing with full micromagnetic simulations in the case of small granular test structures. In the course of the machine learning microstructure analysis the most important features explaining magnetization reversal were found to be the misorientation and the position of the grain within the magnet. The lowest switching fields occur near the top and bottom edges of the magnet. While the dependence of the local switching field on the grain orientation is known from theory, the influence of the position of the grain on the local coercive field strength is less obvious. As a direct result of our findings of the machine learning analysis we show that edge hardening via Dy-diffusion leads to higher coercive fields.

cond-mat.mtrl-sci↗

arXiv2018

Preconditioned nonlinear conjugate gradient method for micromagnetic energy minimization

Fast computation of demagnetization curves is essential for the computational design of soft magnetic sensors or permanent magnet materials. We show that a sparse preconditioner for a nonlinear conjugate gradient energy minimizer can lead to a speed up by a factor of 3 and 7 for computing hysteresis in soft magnetic and hard magnetic materials, respectively. As a preconditioner an approximation of the Hessian of the Lagrangian is used, which only takes local field terms into account. Preconditioning requires a few additional sparse matrix vector multiplications per iteration of the nonlinear conjugate gradient method, which is used for minimizing the energy for a given external field. The time to solution for computing the demagnetization curve scales almost linearly with problem size.

physics.comp-ph↗

arXiv2013

An ESPResSo implementation of elastic objects immersed in a fluid

We review the lattice-Boltzmann (LB) method coupled with the immersed boundary (IB) method for the description of combined flow of particulate suspensions with immersed elastic objects. We describe the implementation of the combined LB-IB method into the open-source package ESPResSo. We present easy-to-use structures used to model a closed object in a simulation package, the definition of its elastic properties, and the interaction between the fluid and the immersed object. We also present the test cases with short examples of the code explaining the functionality of the new package.

physics.comp-ph↗

arXiv2013

Guided self-assembly of magnetic beads for biomedical applications

Micromagnetic beads are widely used in biomedical applications for cell separation, drug delivery, and hypothermia cancer treatment. Here we propose to use self-organized magnetic bead structures which accumulate on fixed magnetic seeding points to isolate circulating tumor cells. The analysis of circulating tumor cells is an emerging tool for cancer biology research and clinical cancer management including the detection, diagnosis and monitoring of cancer. Microfluidic chips for isolating circulating tumor cells use either affinity, size or density capturing methods. We combine multiphysics simulation techniques to understand the microscopic behavior of magnetic beads interacting with Nickel accumulation points used in lab-on-chip technologies. Our proposed chip technology offers the possibility to combine affinity and size capturing with special antibody-coated bead arrangements using a magnetic gradient field created by Neodymium Iron Boron permanent magnets. The multiscale simulation environment combines magnetic field computation, fluid dynamics and discrete particle dynamics.

physics.bio-ph↗

arXiv2013

Simulation of magnetic active polymers for versatile microfluidic devices

We propose to use a compound of magnetic nanoparticles (20-100 nm) embedded in a flexible polymer (Polydimethylsiloxane PDMS) to filter circulating tumor cells (CTCs). The analysis of CTCs is an emerging tool for cancer biology research and clinical cancer management including the detection, diagnosis and monitoring of cancer. The combination of experiments and simulations lead to a versatile microfluidic lab-on-chip device. Simulations are essential to understand the influence of the embedded nanoparticles in the elastic PDMS when applying a magnetic gradient field. It combines finite element calculations of the polymer, magnetic simulations of the embedded nanoparticles and the fluid dynamic calculations of blood plasma and blood cells. With the use of magnetic active polymers a wide range of tunable microfluidic structures can be created. The method can help to increase the yield of needed isolated CTCs.

physics.bio-ph↗

arXiv2011

A tunable cancer cell filter using magnetic beads: cellular and fluid dynamic simulations

In the field of biomedicine magnetic beads are used for drug delivery and to treat hyperthermia. Here we propose to use self-organized bead structures to isolate circulating tumor cells using lab-on-chip technologies. Typically blood flows past microposts functionalized with antibodies for circulating tumor cells. Creating these microposts with interacting magnetic beads makes it possible to tune the geometry in size, position and shape. We develop a simulation tool that combines micromagnetics, discrete particle dynamics and fluid dynamics, in order to design micropost arrays made of interacting beads. For the simulation of blood flow we use the Lattice-Boltzmann method with immersed elastic blood cell models. Parallelization distributes large fluid and particle dynamic simulations over available resources to reduce overall calculation time.

physics.flu-dyn↗