arXiv subjects

Marsel Faizullin

Publications and source records attributed to Marsel Faizullin.

6 recordsLinked to original sources

arXiv2022

Best Axes Composition Extended: Multiple Gyroscopes and Accelerometers Data Fusion to Reduce Systematic Error

Multiple rigidly attached Inertial Measurement Unit (IMU) sensors provide a richer flow of data compared to a single IMU. State-of-the-art methods follow a probabilistic model of IMU measurements based on the random nature of errors combined under a Bayesian framework. However, affordable low-grade IMUs, in addition, suffer from systematic errors due to their imperfections not covered by their corresponding probabilistic model. In this paper, we propose a method, the Best Axes Composition (BAC) of combining Multiple IMU (MIMU) sensors data for accurate 3D-pose estimation that takes into account both random and systematic errors by dynamically choosing the best IMU axes from the set of all available axes. We evaluate our approach on our MIMU visual-inertial sensor and compare the performance of the method with a purely probabilistic state-of-the-art approach of MIMU data fusion. We show that BAC outperforms the latter and achieves up to 20% accuracy improvement for both orientation and position estimation in open loop, but needs proper treatment to keep the obtained gain.

cs.RO↗

arXiv2022

Open-Source LiDAR Time Synchronization System by Mimicking GNSS-clock

Data fusion algorithms that employ LiDAR measurements, such as Visual-LiDAR, LiDAR-Inertial, or Multiple LiDAR Odometry and simultaneous localization and mapping (SLAM) rely on precise timestamping schemes that grant synchronicity to data from LiDAR and other sensors. Poor synchronization performance, due to incorrect timestamping procedure, may negatively affect the algorithms' state estimation results. To provide highly accurate and precise synchronization between the sensors, we introduce an open-source hardware-software LiDAR to other sensors time synchronization system that exploits a dedicated hardware LiDAR time synchronization interface by providing emulated GNSS-clock to this interface, no physical GNSS-receiver is needed. The emulator is based on a general-purpose microcontroller and, due to concise hardware and software architecture, can be easily modified or extended for synchronization of sets of different sensors such as cameras, inertial measurement units (IMUs), wheel encoders, other LiDARs, etc. In the paper, we provide an example of such a system with synchronized LiDAR and IMU sensors. We conducted an evaluation of the sensors synchronization accuracy and precision, and state 1 microsecond performance. We compared our results with timestamping provided by ROS software and by a LiDAR inner clocking scheme to underline clear advantages over these two baseline methods.

cs.RO↗

arXiv2022

SmartDepthSync: Open Source Synchronized Video Recording System of Smartphone RGB and Depth Camera Range Image Frames with Sub-millisecond Precision

Nowadays, smartphones can produce a synchronized (synced) stream of high-quality data, including RGB images, inertial measurements, and other data. Therefore, smartphones are becoming appealing sensor systems in the robotics community. Unfortunately, there is still the need for external supporting sensing hardware, such as a depth camera precisely synced with the smartphone sensors. In this paper, we propose a hardware-software recording system that presents a heterogeneous structure and contains a smartphone and an external depth camera for recording visual, depth, and inertial data that are mutually synchronized. The system is synced at the time and the frame levels: every RGB image frame from the smartphone camera is exposed at the same moment of time with a depth camera frame with sub-millisecond precision. We provide a method and a tool for sync performance evaluation that can be applied to any pair of depth and RGB cameras. Our system could be replicated, modified, or extended by employing our open-sourced materials.

cs.CV↗

arXiv2022

SmartPortraits: Depth Powered Handheld Smartphone Dataset of Human Portraits for State Estimation, Reconstruction and Synthesis

We present a dataset of 1000 video sequences of human portraits recorded in real and uncontrolled conditions by using a handheld smartphone accompanied by an external high-quality depth camera. The collected dataset contains 200 people captured in different poses and locations and its main purpose is to bridge the gap between raw measurements obtained from a smartphone and downstream applications, such as state estimation, 3D reconstruction, view synthesis, etc. The sensors employed in data collection are the smartphone's camera and Inertial Measurement Unit (IMU), and an external Azure Kinect DK depth camera software synchronized with sub-millisecond precision to the smartphone system. During the recording, the smartphone flash is used to provide a periodic secondary source of lightning. Accurate mask of the foremost person is provided as well as its impact on the camera alignment accuracy. For evaluation purposes, we compare multiple state-of-the-art camera alignment methods by using a Motion Capture system. We provide a smartphone visual-inertial benchmark for portrait capturing, where we report results for multiple methods and motivate further use of the provided trajectories, available in the dataset, in view synthesis and 3D reconstruction tasks.

cs.CV↗

arXiv2021

Sub-millisecond Video Synchronization of Multiple Android Smartphones

This paper addresses the problem of building an affordable easy-to-setup synchronized multi-view camera system, which is in demand for many Computer Vision and Robotics applications in high-dynamic environments. In our work, we propose a solution for this problem -- a publicly-available Android application for synchronized video recording on multiple smartphones with sub-millisecond accuracy. We present a generalized mathematical model of timestamping for Android smartphones and prove its applicability on 47 different physical devices. Also, we estimate the time drift parameter for those smartphones, which is less than 1.2 msec per minute for most of the considered devices, that makes smartphones' camera system a worthy analog for professional multi-view systems. Finally, we demonstrate Android-app performance on the camera system built from Android smartphones quantitatively on setup with lights and qualitatively -- on panorama stitching task.

cs.CV↗

arXiv2021

Best Axes Composition: Multiple Gyroscopes IMU Sensor Fusion to Reduce Systematic Error

In this paper, we propose an algorithm to combine multiple cheap Inertial Measurement Unit (IMU) sensors to calculate 3D-orientations accurately. Our approach takes into account the inherent and non-negligible systematic error in the gyroscope model and provides a solution based on the error observed during previous instants of time. Our algorithm, the Best Axes Composition (BAC), chooses dynamically the most fitted axes among IMUs to improve the estimation performance. We compare our approach with a probabilistic Multiple IMU (MIMU) approach, and we validate our algorithm in our collected dataset. As a result, it only takes as few as 2 IMUs to significantly improve accuracy, while other MIMU approaches need a higher number of sensors to achieve the same results.

cs.RO↗