arXiv subjects

Marsha J. Wolf

Publications and source records attributed to Marsha J. Wolf.

14 recordsLinked to original sources

arXiv2026

A Slit Mask Integral Field Unit for the Robert Stobie Spectrograph on the Southern African Large Telescope: I. Instrument Development

Integral field spectroscopy (IFS) has been added as a new observation mode to the Robert Stobie Spectrograph (RSS), the workhorse multi-mode instrument on the Southern African Large Telescope. RSS operates as an imaging spectrograph covering 320-900 nm with a spectral resolution--slit-width product of 6600 arcsec. Using fiber optics and prismatic fold mirrors, we have been able to construct compact integral field units (IFUs) that fit within the same volume as the long-slit cassettes (134 mm x 130 mm x 8 mm). These `slit mask' IFUs (SMIs) direct the telescope beam into a 2D sky-facing fiber array routed in the focal plane dimension into an 8$\arcmin$ 1D pseudo-slit, with fiber output redirected back into the spectrograph collimator. The first completed unit, SMI-200, features 303 object fibers and 24 sky fibers, providing a spatial resolution of 0.8$\arcsec$ (200 $\upmu$m core diameter) over a field of view (FOV) of 22.5$\arcsec$ x 17.6$\arcsec$. This paper describes the specific design considerations and design and fabrication strategies to maximize performance and minimize risk during construction, given the demanding and highly constrained cassette geometry. We also detail mapping and laboratory characterization of the IFU. Laboratory measurements demonstrate a total throughput of 77\%, but an effective throughput of only 55-60\% within the RSS collimator acceptance beam of f/4.2 due to losses dominated by focal ratio degradation (FRD) induced by sharp bend radii imposed by the tight cassette volume.

astro-ph.IM↗

arXiv2022

Slit Mask Integral Field Units for the Southern African Large Telescope

Two fibre integral field units (IFU) are being built in the SAAO fibre-lab for the Robert Stobie Spectrograph's visible arm and the future red arm. Each IFU sits in its own slit-mask cassette and is referred to as a slit-mask IFU (SMI). They will be available some time in 2022. The smaller, 200 micron fibre IFU has 309 X 0.9 arcsec diameter spatial elements covering an elongated hexagonal footprint of 18 X 23 arcsec. The larger, 400 micron fibre IFU has 178 X 1.8 arcsec diameter spatial elements covering an on-sky area of 21 X 44 arcsec. In both cases there are two groups of 13 fibres offset by roughly 50 arcsec on either side of the primary array to sample sky. The 1.8 and 0.9 arcsec spatial resolution SMIs provide median spectral resolution of 1200 and 2400 respectively at H alpha wavelengths in the low resolution mode covering 320 to 740 nm bandpass. At a higher grating angle the SMI will deliver spectral resolution up to 5000 and 10000 with 400 and 200 micron core fibre respectively. A future red-arm will extend the simultaneous wavelength coverage up to 900 nm at a median resolution of 3000/6000 for the same flavors of IFUs. SMIs are inserted in the same fashion as the existing longslit cassettes at the SALT focal plane. Prismatic fold mirrors direct the focal plane into the fibre IFU and then back into the RSS collimator after the fibres are routed 180 deg within the cassette and formatted into a pseudo-slit. Fold prisms ensure that the spectrograph collimator continues to see the same focal plane. In this paper we describe the design, fabrication, assembly and characterization of Slit Mask IFUs.

astro-ph.IM↗

arXiv2022

Optimum telescope focal ratios for microlens-to-fiber coupled integral field spectrographs

We describe the optimum telescope focal ratio for a two-element, three surface, telecentric image-transfer microlens-to-fiber coupled integral field unit within the constraints imposed by micro-optics fabrication and optical aberrations. We create a generalized analytical description of the micro-optics optical parameters from first principals. We find that the optical performance, including all aberrations, of a design constrained by an analytic model considering only spherical aberration and diffraction matches within +/-4% of a design optimized by ray-tracing software such as Zemax. The analytical model does not require any compromise on the available clear aperture; about 90% mechanical aperture of a hexagonal microlens is available for light collection. The optimum telescope f-ratio for a 200μm core fiber fed at f/3.5 is between f/7 and f/12. We find the optimum telescope focal ratio changes as a function of fiber core diameter and fiber input beam speed. A telescope focal ratio of f/8 would support the largest range of fiber diameters (100 to 500μm) and fiber injection speeds (between f/3 and f/5). The optimization of telescope and lenslet-coupled fibers is relevant for the design of high-efficiency dedicated survey telescopes, and for retro-fitting existing facilities via introducing focal macro-optics to match the instrument input requirements.

astro-ph.IM↗

arXiv2022

Observing the Sun as a star: Design and early results from the NEID solar feed

Efforts with extreme-precision radial velocity (EPRV) instruments to detect small-amplitude planets are largely limited, on many timescales, by the effects of stellar variability and instrumental systematics. One avenue for investigating these effects is the use of small solar telescopes which direct disk-integrated sunlight to these EPRV instruments, observing the Sun at high cadence over months or years. We have designed and built a solar feed system to carry out "Sun-as-a-star" observations with NEID, a very high precision Doppler spectrometer recently commissioned at the WIYN 3.5m Telescope at Kitt Peak National Observatory. The NEID solar feed has been taking observations nearly every day since December 2020; data is publicly available at the NASA Exoplanet Science Institute (NExScI) NEID Solar Archive: \url{https://neid.ipac.caltech.edu/search_solar.php}. In this paper, we present the design of the NEID solar feed and explanations behind our design intent. We also present early radial velocity (RV) results which demonstrate NEID's RV stability on the Sun over 4 months of commissioning: 0.66~m/s RMS under good sky conditions and improving to 0.41~m/s RMS under best conditions.

astro-ph.IM↗

arXiv2021

The Prototype Telescope and Spectrograph System for the AMASE Project

We present the design of the prototype telescope and spectrograph system for the Affordable Multiple Aperture Spectroscopy Explorer (AMASE) project. AMASE is a planned project that will pair 100 identical multi-fiber spectrographs with a large array of telephoto lenses to achieve a large area integral field spectroscopy survey of the sky at the spatial resolution of half an arcminute and a spectral resolution of R=15,000, covering important emission lines in the optical for studying the ionized gas in the Milky Way and beyond. The project will be enabled by a significant reduction in the cost of each spectrograph unit, which is achieved by reducing the beam width and the use of small-pixel CMOS detectors, 50um-core optical fibers, and commercial photographic lenses in the spectrograph. Although constrained by the challenging high spectral resolution requirement, we realize a 40% reduction in cost per fiber at constant etendue relative to, e.g., DESI. As the reduction of cost is much more significant than the reduction in the amount of light received per fiber, replicating such a system many times is more cost effective than building a single large spectrograph that achieves the same survey speed. We present the design of the prototype telescope and instrument system and the study of its cost effectiveness.

astro-ph.IM↗

arXiv2021

Development and Characterization of a Precisely Adjustable Fiber Polishing Arm

The development of bare fiber or air-gapped microlens-fiber coupled Integral Field Units (IFUs) for astronomical applications requires careful treatment of the fiber end-faces (terminations). Previous studies suggest that minimization of fiber end face irregularity leads to better optical performance in terms of the diminishing effect of focal ratio degradation. Polishing has typically been performed using commercial rotary polishers with multiple gradually decreasing grit sizes. These polishers generally lack the ability to carefully adjust angular position and polishing force. Control of these parameters vastly help in getting a repeatable and controllable polish over a variety of glass/epoxy/metal matrices that make up integral filed units and fiber slits. A polishing arm is developed to polish the fiber terminations (IFU, mini-bundles and v-grooves) of the NIR Fiber System for the RSS spectrograph at SALT. The polishing arm angular adjustments ensure the correct position and orientation of each termination on the polishing surface during the polish. Various studies have indicated that the fiber focal ratio also degrades if the fiber end face comes under excessive stress. The polishing arm is fitted with a load cell to enable control of the polishing force. We have explored the minimal applicable end stress by applying different loads while polishing. The arm is modular to hold a variety of fiber termination styles. The polishing arm is also designed to access a fiber inspection microscope without removing the fiber termination from the arm. This enables inspection of the finish quality at various stages through polishing process.

astro-ph.IM↗

arXiv2020

Optimization of telescope focal ratios for MLA-fiber coupled Integral Field Units

We have developed an analytic model for generic image transfer using microlens-coupled fibers to determine the telescope input beam speed that optimizes the lenslet clear aperture and minimizes fiber focal-ratio degradation. Assuming fibers are fed at f/3.5 by the lenslets, our study shows that f/11 is the optimum telescope beam speed to feed a lenslet coupled to a fiber with a 100um diameter core. These considerations are relevant for design of high-efficiency, dedicated survey telescopes that employ lenslet-coupled fiber systems.

astro-ph.IM↗

arXiv2020

Fiber positioning in microlens-fiber coupled integral field unit

A generic fiber positioning strategy and a fabrication path are presented for microlens-fiber-coupled integral field units. It is assumed that microlens-produced micro-images are carried to the spectrograph input through step-index,multi-mode fiber, but our results apply to micro-pupil reimaging applications as well. Considered are the performance trades between the filling percentage of the fiber core with the micro-image versus throughput and observing efficiency.A merit function is defined as the product of the transmission efficiency and the etendue loss. For a hexagonal packing of spatial elements, the merit function has been found to be maximized to 94% of an ideal fiber IFU merit value (which has zero transmission loss and does not increase the etendue) with a microlens-fiber alignment (centering) tolerance of 1 um RMS. The maximum acceptable relative tilt between the fiber and the microlens face has been analyzed through optical modeling and found to be 0.3 degree RMS for input f-ratio slower than f/3.5 but it is much more relaxed for faster beams. Several options of fabricating fiber holders have been compared to identify cost-effective solutions that deliver the desired fiber positioning accuracy. Femto-second laser-drilling methods deliver holes arrayed on plates with a position and diameter accuracy of 1.5 um RMS, and with an aspect ratio of 1:10. A commercial vendor produces plates with thickness of 5 mm, but with similar (1 um RMS) positioning accuracy. Both of these techniques are found to be moderately expensive. A purely photo-lithographic technique performed at WCAM (a facility at the University of Wisconsin, Madison), in tandem with deep reactive ion etching, has been used to produce a repeatable recipe with 100% yield. Photo-lithography is more precise (0.5 um RMS) in terms of hole positioning and similar diameter accuracy (1 um RMS).

astro-ph.IM↗

arXiv2020

Solar Contamination in Extreme Precision Radial Velocity Measurements: Deleterious Effects and Prospects for Mitigation

Solar contamination, due to moonlight and atmospheric scattering of sunlight, can cause systematic errors in stellar radial velocity (RV) measurements that significantly detract from the ~10cm/s sensitivity required for the detection and characterization of terrestrial exoplanets in or near Habitable Zones of Sun-like stars. The addition of low-level spectral contamination at variable effective velocity offsets introduces systematic noise when measuring velocities using classical mask-based or template-based cross-correlation techniques. Here we present simulations estimating the range of RV measurement error induced by uncorrected scattered sunlight contamination. We explore potential correction techniques, using both simultaneous spectrometer sky fibers and broadband imaging via coherent fiber imaging bundles, that could reliably reduce this source of error to below the photon-noise limit of typical stellar observations. We discuss the limitations of these simulations, the underlying assumptions, and mitigation mechanisms. We also present and discuss the components designed and built into the NEID precision RV instrument for the WIYN 3.5m telescope, to serve as an ongoing resource for the community to explore and evaluate correction techniques. We emphasize that while "bright time" has been traditionally adequate for RV science, the goal of 10cm/s precision on the most interesting exoplanetary systems may necessitate access to darker skies for these next-generation instruments.

astro-ph.IM↗

arXiv2012

HexPak and GradPak: variable-pitch dual-head IFUs for the WIYN 3.5m Telescope Bench Spectrograph

We describe the design, construction, and expected performance of two new fiber integral field units (IFUs) --- HexPak and GradPak --- for the WIYN 3.5m Telescope Nasmyth focus and Bench Spectrograph. These are the first IFUs to provide formatted fiber integral field spectroscopy with simultaneous sampling of varying angular scales. HexPak and GradPak are in a single cable with a dual-head design, permitting easy switching between the two different IFU heads on the telescope without changing the spectrograph feed: the two heads feed a variable-width double-slit. Each IFU head is comprised of a fixed arrangement of fibers with a range of fiber diameters. The layout and diameters of the fibers within each array are scientifically-driven for observations of galaxies: HexPak is designed to observe face-on spiral or spheroidal galaxies while GradPak is optimized for edge-on studies of galaxy disks. HexPak is a hexagonal array of 2.9 arcsec fibers subtending a 40.9 arcsec diameter, with a high-resolution circular core of 0.94 arcsec fibers subtending 6 arcsec diameter. GradPak is a 39 by 55 arcsec rectangular array with rows of fibers of increasing diameter from angular scales of 1.9 arcsec to 5.6 arcsec across the array. The variable pitch of these IFU heads allows for adequate sampling of light profile gradients while maintaining the photon limit at different scales.

astro-ph.IM↗

arXiv2008

Host Galaxies of Luminous Quasars: Structural Properties and the Fundamental Plane

We present stellar velocity dispersion measurements in the host galaxies of 10 luminous quasars (M_V < -23) using the Ca H&K lines in off-nuclear spectra. We combine these data with effective radii and magnitudes from the literature to place the host galaxies on the Fundamental Plane (FP) where their properties are compared to other types of galaxies. We find that the radio-loud (RL) QSO hosts have similar properties to massive elliptical galaxies, while the radio-quiet (RQ) hosts are more similar to intermediate mass galaxies. The RL hosts lie at the upper extreme of the FP due to their large velocity dispersions ( = 321 km s^-1), low surface brightness ( = 20.8 mag arcsec^-2), and large effective radii ( = 11.4 kpc), and have = 1.5 x 10^12 M_sun and = 12.4. In contrast, properties of the RQ hosts are = 241 km s^-1, ~ 4.4 x 10^11 M_sun, and ~ 5.3. The distinction between these galaxies occurs at sigma_* ~ 300 km s^-1, R_e ~ 6 kpc, and corresponding M_* ~ 5.9 +/- 3.5 x 10^11 M_sun. Our data support previous results that PG QSOs are related to gas-rich galaxy mergers that form intermediate-mass galaxies, while RL QSOs reside in massive early-type galaxies, most of which also show signs of recent mergers or interactions. Most previous work has drawn these conclusions by using estimates of the black hole mass and inferring host galaxy properties from that, while here we have relied purely on directly measured host galaxy properties.

astro-ph↗

arXiv2006

Ages and Metallicities of Extragalactic Globular Clusters from Spectral and Photometric Fits of Stellar Population Synthesis Models

Spectra of galaxies contain an enormous amount of information about the relative mixture of ages and metallicities of constituent stars. We present a comprehensive study designed to extract the maximum information from spectra of data quality typical in large galaxy surveys. We test fitting techniques using the Bruzual-Charlot 2003 high resolution simple stellar population synthesis models to simultaneously estimate the ages and metallicities of 101 globular clusters in M31 and the Magellanic Clouds. The clusters cover a wide range of ages and metallicities, 4 Myr to 20 Gyr and -1.6 < [Fe/H] < +0.3, estimated by other methods in the literature. We compare results from model fits to both the spectra and photometry and find that fits to continuum-normalized (CN) spectra over the entire range available, typically 350-1000 nm for this sample, provides the best results. For clusters older than 1 Gyr we agree with literature ages to 0.16 dex (35%) and [Fe/H] to 0.12 dex. For younger clusters we agree with literature ages to 0.3 dex (63%), but cannot constrain the metallicity. It is particularly important to use the entire CN spectrum to avoid problems with model continua for young objects and to break age-metallicity degeneracies of broadband photometry. Our required S/N = 15-30 for 20% age uncertainties and 30-55 for 10% uncertainties over spectral resolutions of 5-25 Angstroms. This technique should work well for the age-metallicity parameter space expected for early-type galaxies at z~1, although individual galaxy spectral S/N may require the coaddition of a few like objects.

astro-ph↗

arXiv2006

The NIR Upgrade to the SALT Robert Stobie Spectrograph

The near infrared (NIR) upgrade to the Robert Stobie Spectrograph (RSS) on the Southern African Large Telescope (SALT), RSS/NIR, extends the spectral coverage of all modes of the visible arm. The RSS/NIR is a low to medium resolution spectrograph with broadband imaging, spectropolarimetric, and Fabry-Perot imaging capabilities. The visible and NIR arms can be used simultaneously to extend spectral coverage from approximately 3200 A to 1.6 um. Both arms utilize high efficiency volume phase holographic gratings via articulating gratings and cameras. The NIR camera is designed around a 2048x2048 HAWAII-2RG detector housed in a cryogenic dewar. The Epps optical design of the camera consists of 6 spherical elements, providing sub-pixel rms image sizes of 7.5 +/- 1.0 um over all wavelengths and field angles. The exact long wavelength cutoff is yet to be determined in a detailed thermal analysis and will depend on the semi-warm instrument cooling scheme. Initial estimates place instrument limiting magnitudes at J = 23.4 and H(1.4-1.6 um) = 21.6 for S/N = 3 in a 1 hour exposure well below the sky noise.

astro-ph↗

arXiv2001

L Dwarfs Found in Sloan Digital Sky Survey Commissioning Data II. Hobby-Eberly Telescope Observations

Low dispersion optical spectra have been obtained with the Hobby-Eberly Telescope of 22 very red objects found in early imaging data from the Sloan Digital Sky Survey. The objects are assigned spectral types on the 2MASS system (Kirkpatrick et al. 1999) and are found to range from late M to late L. The red- and near-infrared colors from SDSS and 2MASS correlate closely with each other, and most of the colors are closely related to spectral type in this range; the exception is the (i^* - z^*) color, which appears to be independent of spectral type between about M7 and L4. The spectra suggest that this independence is due to the disappearance of the TiO and VO absorption in the i-band for later spectral types; to the presence of strong Na I and K I absorption in the i-band; and to the gradual disappearance of the 8400 Angstrom absorption of TiO and FeH in the z-band.

astro-ph↗