arXiv subjects

Marta Pita-Vidal

Publications and source records attributed to Marta Pita-Vidal.

15 recordsLinked to original sources

arXiv2026

Engineering two-qubit gates via anisotropic exchange in germanium spin qubits

Germanium hole spin qubits are a promising and versatile platform for quantum computation and simulation. In this system, strong spin-orbit interaction (SOI) renders the single-qubit $g$-tensor anisotropic and electrically tunable, enabling operational sweet spots with reduced noise sensitivity. SOI also transforms the isotropic two-qubit exchange coupling into an anisotropic tensor whose geometry is inherited from the single-qubit $g$-tensors and spin-flip tunnelling. Here, using two hole spin qubits in a strained-germanium quantum well and full vector control of the magnetic field, we map this exchange tensor, separate it into longitudinal and transverse components, and show that they govern controlled-phase and SWAP-like dynamics, respectively. We find that the longitudinal exchange can be tuned via the magnetic field orientation from a conventional positive value, through zero, to an effectively negative one, as measured by inverted exchange-split spin transitions. The magnetic field direction thus provides continuous control over the interaction Hamiltonian: at a point of purely transverse exchange, we engineer a single-pulse baseband iSWAP, unattainable under isotropic exchange. Linking $g$-tensor geometry to exchange anisotropy establishes native Hamiltonian engineering, enabling spin-based quantum simulation and gate sets selected by the global field orientation alone.

cond-mat.mes-hall↗

arXiv2026

A dressed singlet-triplet qubit in germanium

In semiconductor hole spin qubits, low magnetic field ($B$) operation extends the coherence time ($T_\mathrm{2}^*$) but proportionally reduces the gate speed. In contrast, singlet-triplet (ST) qubits are primarily controlled by the exchange interaction ($J$) and can thus maintain high gate speeds even at low $B$. However, a large $J$ introduces a significant charge component to the qubit, rendering ST qubits more vulnerable to charge noise when driven. Here, we demonstrate a highly coherent ST hole spin qubit in germanium, operating at both low $B$ and low $J$. By modulating $J$, we achieve resonant driving of the ST qubit, obtaining an average gate fidelity of $99.68\%$ and a coherence time of $T_\mathrm{2}^*=1.9\,μ$s. Moreover, by applying the resonant drive continuously, we realize a dressed ST qubit with a tenfold increase in coherence time ($T_\mathrm{2ρ}^*=20.3\,μ$s). Frequency modulation of the driving signal enables universal control, with an average gate fidelity of $99.63\%$. Our results demonstrate the potential for extending coherence times while preserving high-fidelity control of germanium-based ST qubits, paving the way for more efficient operations in semiconductor-based quantum processors.

cond-mat.mes-hall↗

arXiv2025

Novel qubits in hybrid semiconductor-superconductor nanostructures

Hybrid semiconductor-superconductor qubits have recently emerged as a promising alternative to traditional platforms, combining material advantages with device-level tunability. A defining feature is their gate-tunable Josephson coupling, enabling superconducting qubit architectures with full electric-field control and offering a path toward scalable, low-crosstalk quantum processors. This approach seeks to merge benefits of superconducting and semiconductor qubits, for instance by encoding quantum information in the spin of a quasiparticle occupying an Andreev bound state, thus combining long coherence times with fast, flexible control. Progress has accelerated through bottom-up engineering of Andreev states in coupled quantum dot arrays, leading to architectures such as minimal Kitaev chains hosting Majorana zero modes. In parallel, Hamiltonian-protected designs aim to enhance resilience against local noise and decoherence by exploiting superconducting phase dynamics and discrete charge or flux degrees of freedom. This article reviews recent theoretical and experimental advances in hybrid qubits, providing an overview of physical mechanisms, device implementations, and emerging architectures, with emphasis on their potential for (topologically) protected quantum information processing. While many designs remain at proof-of-concept stage, rapid progress suggests practical demonstrations may soon be achievable.

cond-mat.mes-hall↗

arXiv2025

Resonant two-qubit gates for fermionic simulations with spin qubits

In gate-defined semiconductor spin qubits, the highly tunable Heisenberg exchange interaction is leveraged to implement fermionic two-qubit gates such as CZ and SWAP. However, the broader family of fermionic simulation (fSim) gates remains unexplored, and has the potential to enhance the performance of near-term quantum simulation algorithms. Here, we demonstrate a method to implement the fSim gate set in spin qubits using a single pulse combining baseband and resonant exchange drives. This approach minimizes gate duration and drive amplitude, mitigating decoherence and crosstalk. We validate its effectiveness by realizing a resonant iSWAP gate between two hole spins in germanium, achieving a fidelity of 93.8(5)% extracted with interleaved randomized benchmarking. Quantum process tomography confirms accurate gate calibration and identifies qubit decoherence as the dominant error source. Our results establish a practical route toward a versatile and efficient two-qubit gate set for spin-based quantum processors.

cond-mat.mes-hall↗

arXiv2025

Identifying and mitigating errors in hole spin qubit readout

High-fidelity readout of spin qubits in semiconductor quantum dots can be achieved by combining a radio-frequency (RF) charge sensor together with spin-to-charge conversion and Pauli spin blockade. However, reaching high readout fidelities in hole spin qubits remains elusive and is complicated by a combination of site-dependent spin anisotropies and short spin relaxation times. Here, we analyze the different error processes that arise during readout using a double-latched scheme in a germanium double quantum dot hole spin qubit system. We first investigate the spin-to-charge conversion process as a function of magnetic field orientation, and configure the system to adiabatically map the $\lvert \downarrow\downarrow \rangle$ state to the only non-blockaded state. We reveal a strong dependence of the spin relaxation rates on magnetic field strength and minimize this relaxation by operating at low fields. We further characterize and mitigate the error processes that arise during the double-latching process. By combining an RF charge sensor, a double-latching process, and optimized magnetic field parameters, we achieve a single-shot single-qubit state-preparation-and-measurement fidelity of 97.0%, the highest reported fidelity for hole spin qubits. Unlike prior works and vital to usability, we simultaneously maintain universal control of both spins. These findings lay the foundation for the reproducible achievement of high-fidelity readout in hole-based spin quantum processors.

cond-mat.mes-hall↗

arXiv2024

Blueprint for all-to-all connected superconducting spin qubits

Andreev (or superconducting) spin qubits (ASQs) have recently emerged as a promising qubit platform that combines superconducting circuits with semiconductor spin degrees of freedom. While recent experiments have successfully coupled two ASQs, how to realize a scalable architecture for extending this coupling to multiple distant qubits remains an open question. In this work, we resolve this challenge by introducing an architecture that achieves all-to-all connectivity between multiple remote ASQs. Our approach enables selective connectivity between any qubit pair while maintaining all other qubit pairs uncoupled. Furthermore, we demonstrate the feasibility of efficient readout using circuit quantum electrodynamics techniques and compare different readout configurations. Our architecture shows promise both for gate-based quantum computing and for analog quantum simulation applications by offering higher qubit connectivity than alternative solid-state platforms.

quant-ph↗

arXiv2024

Gate-tunable kinetic inductance parametric amplifier

Superconducting parametric amplifiers play a crucial role in the preparation and readout of quantum states at microwave frequencies, enabling high-fidelity measurements of superconducting qubits. Most existing implementations of these amplifiers rely on the nonlinearity from Josephson junctions, superconducting quantum interference devices or disordered superconductors. Additionally, frequency tunability arises typically from either flux or current biasing. In contrast, semiconductor-based parametric amplifiers are tunable by local electric fields, which impose a smaller thermal load on the cryogenic setup than current and flux biasing and lead to vanishing crosstalk to other on-chip quantum systems. In this work, we present a gate-tunable parametric amplifier that operates without Josephson junctions, utilizing a proximitized semiconducting nanowire. This design achieves near-quantum-limited performance, featuring more than 20 dB gain and a 30 MHz gain-bandwidth product. The absence of Josephson junctions allows for advantages, including substantial saturation powers of -120dBm, magnetic field compatibility up to 500 mT and frequency tunability over a range of 15 MHz. Our realization of a parametric amplifier supplements efforts towards gate-controlled superconducting electronics, further advancing the abilities for high-performing quantum measurements of semiconductor-based and superconducting quantum devices.

quant-ph↗

arXiv2023

Strong tunable coupling between two distant superconducting spin qubits

Superconducting (or Andreev) spin qubits have recently emerged as an alternative qubit platform with realizations in semiconductor-superconductor hybrid nanowires. In these qubits, the spin degree of freedom is intrinsically coupled to the supercurrent across a Josephson junction via the spin-orbit interaction, which facilitates fast, high-fidelity spin readout using circuit quantum electrodynamics techniques. Moreover, this spin-supercurrent coupling has been predicted to facilitate inductive multi-qubit coupling. In this work, we demonstrate a strong supercurrent-mediated coupling between two distant Andreev spin qubits. This qubit-qubit interaction is of the longitudinal type and we show that it is both gate- and flux-tunable up to a coupling strength of 178 MHz. Finally, we find that the coupling can be switched off in-situ using a magnetic flux. Our results demonstrate that integrating microscopic spin states into a superconducting qubit architecture can combine the advantages of both semiconductors and superconducting circuits and pave the way to fast two-qubit gates between remote spins.

quant-ph↗

arXiv2023

Impurity Knight shift in quantum dot Josephson junctions

Spectroscopy of a Josephson junction device with an embedded quantum dot reveals the presence of a contribution to level splitting in external magnetic field that is proportional to $\cos ϕ$, where $ϕ$ is the gauge-invariant phase difference across the junction. To elucidate the origin of this unanticipated effect, we systematically study the Zeeman splitting of spinful subgap states in the superconducting Anderson impurity model. The magnitude of the splitting is renormalized by the exchange interaction between the local moment and the continuum of Bogoliubov quasiparticles in a variant of the Knight shift phenomenon. The leading term in the shift is linear in the hybridisation strength $Γ$ (quadratic in electron hopping), while the subleading term is quadratic in $Γ$ (quartic in electron hopping) and depends on $ϕ$ due to spin-polarization-dependent corrections to the Josephson energy of the device. The amplitude of the $ϕ$-dependent part is largest for experimentally relevant parameters beyond the perturbative regime where it is investigated using numerical renormalization group calculations. Such magnetic-field-tunable coupling between the quantum dot spin and the Josephson current could find wide use in superconducting spintronics.

cond-mat.mes-hall↗

arXiv2022

Gate-tunable kinetic inductance in proximitized nanowires

We report the detection of a gate-tunable kinetic inductance in a hybrid InAs/Al nanowire. For this purpose, we have embedded the nanowire into a quarter-wave coplanar waveguide resonator and measured the resonance frequency of the circuit. We find that the resonance frequency can be changed via the gate voltage that controls the electron density of the proximitized semiconductor and thus the nanowire inductance. Applying Mattis-Bardeen theory, we extract the gate dependence of the normal state conductivity of the nanowire, as well as its superconducting gap. Our measurements complement existing characterization methods for hybrid nanowires and provide a new and useful tool for gate-controlled superconducting electronics.

cond-mat.supr-con↗

arXiv2022

Spectroscopy of spin-split Andreev levels in a quantum dot with superconducting leads

We use a hybrid superconductor-semiconductor transmon device to perform spectroscopy of a quantum dot Josephson junction tuned to be in a spin-1/2 ground state with an unpaired quasiparticle. Due to spin-orbit coupling, we resolve two flux-sensitive branches in the transmon spectrum, depending on the spin of the quasi-particle. A finite magnetic field shifts the two branches in energy, favoring one spin state and resulting in the anomalous Josephson effect. We demonstrate the excitation of the direct spin-flip transition using all-electrical control. Manipulation and control of the spin-flip transition enable the future implementation of charging energy protected Andreev spin qubits.

cond-mat.mes-hall↗

arXiv2022

Direct manipulation of a superconducting spin qubit strongly coupled to a transmon qubit

Spin qubits in semiconductors are currently one of the most promising architectures for quantum computing. However, they face challenges in realizing multi-qubit interactions over extended distances. Superconducting spin qubits provide a promising alternative by encoding a qubit in the spin degree of freedom of an Andreev level. Such an Andreev spin qubit could leverage the advantages of circuit quantum electrodynamic, enabled by an intrinsic spin-supercurrent coupling. The first realization of an Andreev spin qubit encoded the qubit in the excited states of a semiconducting weak-link, leading to frequent decay out of the computational subspace. Additionally, rapid qubit manipulation was hindered by the need for indirect Raman transitions. Here, we exploit a different qubit subspace, using the spin-split doublet ground state of an electrostatically-defined quantum dot Josephson junction with large charging energy. Additionally, we use a magnetic field to enable direct spin manipulation over a frequency range of 10 GHz. Using an all-electric microwave drive we achieve Rabi frequencies exceeding 200 MHz. We furthermore embed the Andreev spin qubit in a superconducting transmon qubit, demonstrating strong coherent qubit-qubit coupling. These results are a crucial step towards a hybrid architecture that combines the beneficial aspects of both superconducting and semiconductor qubits.

quant-ph↗

arXiv2022

Mitigation of quasiparticle loss in superconducting qubits by phonon scattering

Quantum error correction will be an essential ingredient in realizing fault-tolerant quantum computing. However, most correction schemes rely on the assumption that errors are sufficiently uncorrelated in space and time. In superconducting qubits this assumption is drastically violated in the presence of ionizing radiation, which creates bursts of high energy phonons in the substrate. These phonons can break Cooper-pairs in the superconductor and, thus, create quasiparticles over large areas, consequently reducing qubit coherence across the quantum device in a correlated fashion. A potential mitigation technique is to place large volumes of normal or superconducting metal on the device, capable of reducing the phonon energy to below the superconducting gap of the qubits. To investigate the effectiveness of this method we fabricate a quantum device with four nominally identical nanowire-based transmon qubits. On the device, half of the niobium-titanium-nitride ground plane is replaced with aluminum (Al), which has a significantly lower superconducting gap. We deterministically inject high energy phonons into the substrate by voltage biasing a galvanically isolated Josephson junction. In the presence of the low gap material, we find a factor of 2-5 less degradation in the injection-dependent qubit lifetimes, and observe that undesired excited qubit state population is mitigated by a similar factor. We furthermore turn the Al normal with a magnetic field, finding no change in the phonon-protection. This suggests that the efficacy of the protection in our device is not limited by the size of the superconducting gap in the Al ground plane. Our results provide a promising foundation for protecting superconducting qubit processors against correlated errors from ionizing radiation.

quant-ph↗

arXiv2022

Singlet-doublet transitions of a quantum dot Josephson junction detected in a transmon circuit

We realize a hybrid superconductor-semiconductor transmon device in which the Josephson effect is controlled by a gate-defined quantum dot in an InAs/Al nanowire. Microwave spectroscopy of the transmon's transition spectrum allows us to probe the ground state parity of the quantum dot as a function of gate voltages, external magnetic flux, and magnetic field applied parallel to the nanowire. The measured parity phase diagram is in agreement with that predicted by a single-impurity Anderson model with superconducting leads. Through continuous time monitoring of the circuit we furthermore resolve the quasiparticle dynamics of the quantum dot Josephson junction across the phase boundaries. Our results can facilitate the realization of semiconductor-based $0-π$ qubits and Andreev qubits.

cond-mat.mes-hall↗

arXiv2020

A gate-tunable, field-compatible fluxonium

Circuit quantum electrodynamics, where photons are coherently coupled to artificial atoms built with superconducting circuits, has enabled the investigation and control of macroscopic quantum-mechanical phenomena in superconductors. Recently, hybrid circuits incorporating semiconducting nanowires and other electrostatically-gateable elements have provided new insights into mesoscopic superconductivity. Extending the capabilities of hybrid flux-based circuits to work in magnetic fields would be especially useful both as a probe of spin-polarized Andreev bound states and as a possible platform for topological qubits. The fluxonium is particularly suitable as a readout circuit for topological qubits due to its unique persistent-current based eigenstates. In this Letter, we present a magnetic-field compatible hybrid fluxonium with an electrostatically-tuned semiconducting nanowire as its non-linear element. We operate the fluxonium in magnetic fields up to 1T and use it to observe the $φ_0$-Josephson effect. This combination of gate-tunability and field-compatibility opens avenues for the exploration and control of spin-polarized phenomena using superconducting circuits and enables the use of the fluxonium as a readout device for topological qubits.

quant-ph↗