arXiv subjects

Martien Den Hertog

Publications and source records attributed to Martien Den Hertog.

10 recordsLinked to original sources

arXiv2026

Growth and Morphology of InN Nanowires on Si<111> and Si<100> at Back-End-Of-Line Compatible Temperatures

InN nanowires were grown on Si<111> and Si<100> substrates by plasma-assisted molecular beam epitaxy using a thin AlN buffer layer at temperatures compatible with the thermal budget limitation imposed by Back-End-Of-Line processing. Reflection high-energy electron diffraction reveals different nucleation behaviors on the two substrate orientations, with higher structural disorder in the case of Si<100>. However, vertically aligned nanowires with hexagonal cross section and N polarity are obtained on both substrates. A statistical analysis of nanowire morphology as a function of growth temperature indicates similar trends in diameter, density, and length on Si<111> and Si<100>, which are explained by adatom kinetics during growth. Nanowires on Si<100> exhibit improved uniformity and reduced tapering, attributed to the different nanowire nucleation due to microstructural properties of the AlN buffer layer. The results demonstrate the feasibility of growing high-quality InN nanowires on Si<100>, supporting their potential for monolithic integration of nanowire-based photodetectors on silicon.

cond-mat.mtrl-sci↗

arXiv2021

Nano-sheets of two-dimensional polymers with dinuclear (arene)ruthenium nodes, synthesised at a liquid/liquid interface

We developed a new class of mono- or few-layered two-dimensional polymers based on dinuclear (arene)ruthenium nodes, obtained by combining the imine condensation with an interfacial chemistry process, and use a modified Langmuir-Schaefer method to transfer them onto solid surfaces. Robust nano-sheets of 2D polymers including dinuclear complexes of heavy ruthenium atoms as nodes were synthesised. These nano-sheets, whose thickness is of a few tens of nanometers, were suspended onto solid porous membranes. Then, they were thoroughly characterised with a combination of local probes, including Raman scattering, Fourier transform infrared spectroscopy and transmission electron microscopy in imaging and diffraction mode.

cond-mat.mtrl-sci↗

arXiv2017

Demonstration of a 2x2 programmable phase plate for electrons

First results on the experimental realisation of a 2x2 programmable phase plate for electrons are presented. The design consists of an array of electrostatic einzel lenses that influence the phase of electron waves passing through 4 separately controllable aperture holes. This functionality is demonstrated in a conventional transmission electron microscope operating at 300~kV and results are in very close agreement with theoretical predictions. The dynamic creation of a set of electron probes with different phase symmetry is demonstrated, thereby bringing adaptive optics in TEM one step closer to reality. The limitations of the current design and how to overcome these in the future are discussed. Simulations show how further evolved versions of the current proof of concept might open new and exciting application prospects for beam shaping and aberration correction.

physics.app-ph↗

arXiv2017

Dislocation-free axial InAs-on-GaAs nanowires on silicon

We report on the growth of axial InAs-on-GaAs nanowire heterostructures on silicon by molecular beam epitaxy using 20 nm diameter Au catalysts. First, the growth parameters of the GaAs nanowire segment were optimized to achieve a pure wurtzite crystal structure. Then, we developed a two-step growth procedure to enhance the yield of vertical InAs-on-GaAs nanowires. We achieved 90% of straight InAs-on-GaAs nanowires by further optimizing the growth parameters. We investigated the composition change at the interface by energy dispersive X-ray spectroscopy and the nanowire crystal structure by transmission electron microscopy. The nominal composition of the InAs segment is found to be In$_{x}$Ga$_{1-x}$As with $x$=0.85 and corresponds to 6% of lattice mismatch with GaAs. Strain mapping performed by the geometrical phase analysis of high-resolution images revealed a dislocation-free GaAs/InAs interface. In conclusion, we successfully fabricated highly mismatched heterostructures, confirming the prediction that axial GaAs/InAs interfaces are pseudomorphic in nanowires below 40 nm diameter.

cond-mat.mtrl-sci↗

arXiv2017

UV Photosensing Characteristics of Nanowire-Based GaN/AlN Superlattices

We have characterized the photodetection capabilities of single GaN nanowires incorporating 20 periods of AlN/GaN:Ge axial heterostructures enveloped in an AlN shell. Transmission electron microscopy confirms the absence of an additional GaN shell around the heterostructures. In the absence of a surface conduction channel, the incorporation of the heterostructure leads to a decrease of the dark current and an increase of the photosensitivity. A significant dispersion in the magnitude of dark currents for different single nanowires is attributed to the coalescence of nanowires with displaced nanodisks, reducing the effective length of the heterostructure. A larger number of active nanodisks and AlN barriers in the current path results in lower dark current and higher photosensitivity, and improves the sensitivity of the nanowire to variations in the illumination intensity (improved linearity). Additionally, we observe a persistence of the photocurrent, which is attributed to a change of the resistance of the overall structure, particularly the GaN stem and cap sections. In consequence, the time response is rather independent of the dark current.

cond-mat.mes-hall↗

arXiv2014

Polarization fields in GaN/AlN nanowire heterostructures studied by Off axis holography

In this work, we present an off-axis holography study of GaN/AlN heterostructured nanowires grown by plasma-assisted molecular-beam epitaxy. We discuss the sample preparation of nanowire samples for electron holography and combine potential profiles obtained using holography with theoretical calculations of the projected potential in order to gain understanding of the potential distribution in these nanostructures. The effects of surface states are discussed

cond-mat.mtrl-sci↗

arXiv2014

Cathodoluminescence of stacking fault bound excitons for local probing of the exciton diffusion length in single GaN nanowires

We perform correlated studies of individual GaN nanowires in scanning electron microscopy combined to low temperature cathodoluminescence, microphotoluminescence, and scanning transmission electron microscopy. We show that some nanowires exhibit well localized regions emitting light at the energy of a stacking fault bound exciton (3.42 eV) and are able to observe the presence of a single stacking fault in these regions. Precise measurements of the cathodoluminescence signal in the vicinity of the stacking fault give access to the exciton diffusion length near this location.

cond-mat.mes-hall↗

arXiv2013

Optical properties of single ZnTe nanowires grown at low temperature

Optically active gold-catalyzed ZnTe nanowires have been grown by molecular beam epitaxy, on a ZnTe(111) buffer layer, at low temperature 350\degree under Te rich conditions, and at ultra-low density (from 1 to 5 nanowires per micrometer^{2}. The crystalline structure is zinc blende as identified by transmission electron microscopy. All nanowires are tapered and the majority of them are <111> oriented. Low temperature micro-photoluminescence and cathodoluminescence experiments have been performed on single nanowires. We observe a narrow emission line with a blue-shift of 2 or 3 meV with respect to the exciton energy in bulk ZnTe. This shift is attributed to the strain induced by a 5 nm-thick oxide layer covering the nanowires, and this assumption is supported by a quantitative estimation of the strain in the nanowires.

cond-mat.mtrl-sci↗

arXiv2012

Insertion of CdSe quantumdots in ZnSe nanowires : MBE growth and microstructure analysis

ZnSe nanowire growth has been successfully achieved on ZnSe (100) and (111)B buffer layers deposited on GaAs substrates. Cubic [100] oriented ZnSe nanowires or [0001] oriented hexagonal NWs are obtained on (100) substrates while [111] oriented cubic mixed with [0001] oriented hexagonal regions are obtained on (111)B substrates. Most of the NWs are perpendicular to the surface in the last case. CdSe quantum dots were successfully incorporated in the ZnSe NWs as demonstrated by transmission electron microscopy, energy filtered TEM and high angle annular dark field scanning TEM measurements.

cond-mat.mtrl-sci↗

arXiv2012

Polarity determination in ZnSe nanowires by HAADF STEM

High angle annular dark field scanning transmission electron microscopy is used to analyze the polarity of ZnSe nanowires grown, by molecular beam epitaxy, on GaAs substrates. The experimental results are compared to simulated images in order to verify possible experimental artefacts. In this work we show that for this type of nano-objects, a residual tilt of the specimen below 15 mrad, away from the crystallographic zone axis does not impair the interpretation of the experimental images.

cond-mat.mtrl-sci↗