SearcharxivSearch

arXiv subjects

Martin Huarte-Espinosa

Publications and source records attributed to Martin Huarte-Espinosa.

9 recordsLinked to original sources

Large-scale structures in high Reynolds number rotating Waleffe flow

We perform direct numerical simulations of rotating turbulent Waleffe flow, the flow between two parallel plates with a sinusoidal streamwise shear driving force, to study the formation of large-scale structures and the mechanisms for momentum transport. We simulate different cyclonic and anti-cyclonic rotations in the range of dimensionless rotation numbers (inverse Rossby numbers) $R_Ω$ $\in$ $[-0.16, 2.21]$, and fix the Reynolds number to $Re=3.16\times 10^3$, large enough such that the shear transport is almost entirely due to Reynolds stresses and viscous transport is negligible. We find an optimum rotation in anti-cyclonic regime at $R_Ω=0.63$, where a given streamwise momentum transport in the wall-normal direction is achieved with minimum mean energy of the streamwise flow. We link this optimal transport to the strength of large scale structures, as was done in plane Couette by Brauckmann \& Eckhardt (J. Fluid Mech., 815, 2017). Furthermore, we explore the large-scale structures and their behaviour under spanwise rotation, and find disorganized large structures at $R_Ω=0$ but highly organized structures in the anti-cyclonic regime, similar to the rolls in rotating plane Couette and turbulent Taylor Couette flow. We compare the large scale structures of plane Couette flow and Waleffe flow, and observe that the streamwise vorticity is localized inside the cores of the rolls. We show that the rolls take energy from the mean flow at long time-scales, and relate these structures to eigenvalues of the streamfunction.

physics.flu-dyn

Models of the Hydrodynamic Histories of post-AGB Stars. I. Multiflow Shaping of OH231.8+04.2

We present a detailed hydrodynamic model that matches the present structure of the well-observed preplanetary nebula OH231.8+04.2. The purpose of the model is to present a physically justified and coherent picture of its evolutionary history from about 100 years of the start of the formation of its complex outer structures to the present. We have adopted a set of initial conditions that are heavily constrained by high-quality observations of its present structure and kinematics. The shaping of the nebula occurs while the densities of the flows are "light": less than the surrounding AGB-wind environment. The simulations show that pairs of essentially coeval clumps and sprays of the same extent and density but different outflow speeds sculpted both the pair of thin axial flow "or spine" and the bulbs. The total ejected mass and momentum in the best fit model are surprisingly large -- 3 M_sun and 2.2 x 10^41 gm cm s-1, respectively -- however, these values are reduced by up to a factor of ten in other models that fit the data almost as well. Our ultimate goal is to combine the present model results of masses, momenta, flow speeds, and flow geometries for OH231 with those of other models to be published in the future in order to find common attributes of their ejection histories.

astro-ph.SR

Size of discs formed by wind accretion in binaries can be underestimated if the role of wind-driving force is ignored

Binary systems consisting of a secondary accreting form a wind-emitting primary are ubiquitous in astrophysics. The phenomenology of such Bondi-Hoyle-Lyttleton (BHL) accretors is particularly rich when an accretion disc forms around the secondary. The outer radius of such discs is commonly estimated from the net angular momentum produced by a density variation of material across the BHL or Bondi accretion cylinder, as the latter is tilted with respect to the direction to the primary due to orbital motion. But this approach has ignored the fact that the wind experiences an outward driving force that the secondary does not. In actuality, the accretion stream falls toward a retarded point in the secondary's orbit as the secondary is pulled toward the primary relative to the stream. The result is a finite separation or "accretion stream impact parameter" (ASIP) separating the secondary and stream. When the orbital radius a_o exceeds the BHL radius r_b, the ratio of outer disc radius estimated as the ASIP to the conventional estimate a_o^{1/2}/r_b^{1/2}>1. We therefore predict that discs will form at larger radii from the secondary than traditional estimates. This agrees with the importance of the ASIP emphasized by Huarte-Espinosa et al. (2013) and the practical consequence that resolving the initial outer radius of such an accretion disc in numerical simulations can be less demanding than what earlier estimates would suggest.

astro-ph.HE

The Formation and Evolution of Wind-Capture Disks In Binary Systems

We study the formation, evolution and physical properties of accretion disks formed via wind capture in binary systems. Using the AMR code AstroBEAR, we have carried out high resolution 3D simulations that follow a stellar mass secondary in the co-rotating frame as it orbits a wind producing AGB primary. We first derive a resolution criteria, based on considerations of Bondi-Hoyle flows, that must be met in order to properly resolve the formation of accretion disks around the secondary. We then compare simulations of binaries with three different orbital radii (10, 15, 20 AU). Disks are formed in all three cases, however the size of the disk and, most importantly, its accretion rate decreases with orbital radii. In addition, the shape of the orbital motions of material within the disk becomes increasingly elliptical with increasing binary separation. The flow is mildly unsteady with "fluttering" around the bow shock observed. The disks are generally well aligned with the orbital plane after a few binary orbits. We do not observe the presence of any large scale, violent instabilities (such as the flip-flop mode). For the first time, moreover, it is observed that the wind component that is accreted towards the secondary has a vortex tube-like structure, rather than a column-like one as it was previously thought. In the context of AGB binary systems that might be precursors to Pre-Planetary and Planetary Nebula, we find that the wind accretion rates at the chosen orbital separations are generally too small to produce the most powerful outflows observed in these systems if the companions are main sequence stars but marginally capable if the companions are white dwarfs. It is likely that many of the more powerful PPN and PN involve closer binaries than the ones considered here. The results also demonstrate principles of broad relevance to all wind-capture binary systems.

astro-ph.SR

Mass loading and knot formation in AGN jets by stellar winds

Jets from active galaxies propagate from the central black hole out to the radio lobes on scales of hundreds of kiloparsecs. The jets may encounter giant stars with strong stellar winds and produce observable signatures. For strong winds and weak jets, the interaction may truncate the jet flow during its transit via the mass loading. For weaker jets, the interaction can produce knots in the jet. We present recent 3DMHD numerical simulations to model the evolution of this jet-wind interaction and its observational consequences. We explore (i) the relative mechanical luminosity of the radio jets and the stellar winds (ii) the impact parameter between the jets' axis and the stellar orbital path (iii) the relative magnetic field strength of the jets and the stellar winds.

astro-ph.HE

Three-dimensional magnetohydrodynamic simulations of the evolution of magnetic fields in Fanaroff-Riley class II radio sources

Radio observations of Fanaroff-Riley class II sources often show correlations between the synchrotron emission and the linear-polarimetric distributions. Magnetic position vectors seem to align with the projected emission of both the radio jets and the sources' edges. Using statistics we study such relation as well as its unknown time evolution via synthetic polarisation maps of model FR II sources formed in 3D-MHD numerical simulations of bipolar, hypersonic and weakly magnetised jets. The magnetic field is initially random with a Kolmogorov power spectrum, everywhere. We investigate the structure and evolution of magnetic fields in the sources as a function of the power of jets and the observational viewing angle. Our synthetic polarisation maps agree with observations, showing B-field vectors which are predominantly aligned with the jet axis, and show that magnetic fields inside sources are shaped by the jets' backflow. Polarimetry is found to correlate with time, the viewing angle and the jet-to-ambient density contrast. The magnetic structure inside thin elongated sources is more uniform than inside more spherical ones. We see jets increase the magnetic energy in cocoons in proportion to the jet velocity and the cocoon width. Filaments in the synthetic emission maps suggest turbulence develops in evolved sources.

astro-ph.CO

Modelling magnetically dominated and radiatively cooling jets

Using 3D-MHD Eulerian-grid numerical simulations, we study the formation and evolution of rising magnetic towers propagating into an ambient medium. The towers are generated from a localized injection of pure magnetic energy. No rotation is imposed on the plasma. We compare the evolution of a radiatively cooling tower with an adiabatic one, and find that both bend due to pinch instabilities. Collimation is stronger in the radiative cooling case; the adiabatic tower tends to expand radially. Structural similarities are found between these towers and the millimeter scale magnetic towers produced in laboratory experiments.

astro-ph.SR

3D-MHD simulations of the evolution of magnetic fields in FR II radio sources

3D-MHD numerical simulations of bipolar, hypersonic, weakly magnetized jets and synthetic synchrotron observations are presented to study the structure and evolution of magnetic fields in FR II radio sources. The magnetic field setup in the jet is initially random. The power of the jets as well as the observational viewing angle are investigated. We find that synthetic polarization maps agree with observations and show that magnetic fields inside the sources are shaped by the jets' backflow. Polarimetry statistics correlates with time, the viewing angle and the jet-to-ambient density contrast. The magnetic structure inside thin elongated sources is more uniform than for ones with fatter cocoons. Jets increase the magnetic energy in cocoons, in proportion to the jet velocity. Both, filaments in synthetic emission maps and 3D magnetic power spectra suggest that turbulence develops in evolved sources.

astro-ph.CO

Dynamical and chemical effects of FR II radio sources on the intra-cluster medium

We investigate the effects of intermittent strong jets from an Active Galactic Nuclei (AGN) of a massive galaxy in the core of a cool core galaxy cluster, on the dynamics and metal distribution of the intra-cluster medium (ICM). We use a simple model for the metal distribution within the host galaxy which includes metal injection via star formation. We carry out 2D axisymmetric hydrodynamic simulations of these systems. After having established a cooling flow, two light jets are injected in opposite directions with a range of (intermittent) active phases. We follow the time evolution of the system from the jets' active phases up to 3 Gyr. The general metallicity evolution for all our simulations is very similar on large-scales. The convective flows driven by the jets advect gas and metals from the central galaxy to distances beyond 1.5 Mpc within the cluster. Intermittent jets are able to distribute metals to grater radii. The metal injection has effects on the general metal abundances present in the ICM, the faster the metal replenishment time the higher the metal abundance. Although metallicity gradients in the very central regions of cool core clusters are likely to be shaped by less-energetic phenomena, we find evidence in our simulations for metallicity gradients similar to those observed out to ~400 kpc radius. The metal distribution details of the central galaxy have no effects on the dynamical evolution of the ICM metals.

astro-ph