Searcharxiv⌕ Search

arXiv subjects

Martin J. Stevens

Publications and source records attributed to Martin J. Stevens.

35 records · Page 2Linked to original sources

Witnessing the survival of time-energy entanglement through biological tissue and scattering media

We demonstrate the preservation of time-energy entanglement of near-IR photons through thick biological media ($\leq$1.55 mm) and tissue ($\leq$ 235 $μ$m) at room temperature. Using a Franson-type interferometer, we demonstrate interferometric contrast of over 0.9 in skim milk, 2% milk, and chicken tissue. This work supports the many proposed opportunities for nonclassical light in biological imaging and analyses from sub-shot noise measurements to entanglement-enhanced fluorescence imaging, clearly indicating that the entanglement characteristics of photons can be maintained even after propagation through thick, turbid biological samples.

quant-ph↗

Setting bounds on two-photon absorption cross-sections in common fluorophores with entangled photon pair excitation

Excitation with entangled photon pairs may lead to an increase in the efficiency of two-photon absorption at low photon flux. The corresponding process, entangled two-photon absorption (E2PA), has been investigated in numerous theoretical and experimental studies. However, significant ambiguity and inconsistency remain in the literature about the absolute values of E2PA cross-sections. Here, we use a fluorescence-based registration scheme to experimentally determine upper bounds on the cross-sections for six fluorophores. These bounds are up to four orders of magnitude lower than the smallest published cross-section. For two samples that have been studied by others, Rhodamine 6G and 9R-S, we measure upper bounds four and five orders of magnitude lower than the previously reported cross-sections.

quant-ph↗

Experimental Low-Latency Device-Independent Quantum Randomness

Applications of randomness such as private key generation and public randomness beacons require small blocks of certified random bits on demand. Device-independent quantum random number generators can produce such random bits, but existing quantum-proof protocols and loophole-free implementations suffer from high latency, requiring many hours to produce any random bits. We demonstrate device-independent quantum randomness generation from a loophole-free Bell test with a more efficient quantum-proof protocol, obtaining multiple blocks of $512$ bits with an average experiment time of less than $5$ min per block and with a certified error bounded by $2^{-64}\approx 5.42\times 10^{-20}$.

quant-ph↗

Experimentally Generated Randomness Certified by the Impossibility of Superluminal Signals

From dice to modern complex circuits, there have been many attempts to build increasingly better devices to generate random numbers. Today, randomness is fundamental to security and cryptographic systems, as well as safeguarding privacy. A key challenge with random number generators is that it is hard to ensure that their outputs are unpredictable. For a random number generator based on a physical process, such as a noisy classical system or an elementary quantum measurement, a detailed model describing the underlying physics is required to assert unpredictability. Such a model must make a number of assumptions that may not be valid, thereby compromising the integrity of the device. However, it is possible to exploit the phenomenon of quantum nonlocality with a loophole-free Bell test to build a random number generator that can produce output that is unpredictable to any adversary limited only by general physical principles. With recent technological developments, it is now possible to carry out such a loophole-free Bell test. Here we present certified randomness obtained from a photonic Bell experiment and extract 1024 random bits uniform to within $10^{-12}$. These random bits could not have been predicted within any physical theory that prohibits superluminal signaling and allows one to make independent measurement choices. To certify and quantify the randomness, we describe a new protocol that is optimized for apparatuses characterized by a low per-trial violation of Bell inequalities. We thus enlisted an experimental result that fundamentally challenges the notion of determinism to build a system that can increase trust in random sources. In the future, random number generators based on loophole-free Bell tests may play a role in increasing the security and trust of our cryptographic systems and infrastructure.

quant-ph↗

All-silicon light-emitting diodes waveguide-integrated with superconducting single-photon detectors

We demonstrate cryogenic, electrically-injected, waveguide-coupled Si light-emitting diodes (LEDs) operating at 1.22 $μ$m. The active region of the LED consists of W centers implanted in the intrinsic region of a $p$-$i$-$n$ diode. The LEDs are integrated on waveguides with superconducting nanowire single-photon detectors (SNSPDs). We demonstrate the scalability of this platform with an LED coupled to eleven SNSPDs in a single integrated photonic device. Such on-chip optical links may be useful for quantum information or neuromorphic computing applications.

physics.app-ph↗

A strong loophole-free test of local realism

We present a loophole-free violation of local realism using entangled photon pairs. We ensure that all relevant events in our Bell test are spacelike separated by placing the parties far enough apart and by using fast random number generators and high-speed polarization measurements. A high-quality polarization-entangled source of photons, combined with high-efficiency, low-noise, single-photon detectors, allows us to make measurements without requiring any fair-sampling assumptions. Using a hypothesis test, we compute p-values as small as $5.9\times 10^{-9}$ for our Bell violation while maintaining the spacelike separation of our events. We estimate the degree to which a local realistic system could predict our measurement choices. Accounting for this predictability, our smallest adjusted p-value is $2.3 \times 10^{-7}$. We therefore reject the hypothesis that local realism governs our experiment.

quant-ph↗

Experimental investigation of the detection mechanism in WSi nanowire superconducting single photon detectors

We use quantum detector tomography to investigate the detection mechanism in WSi nanowire superconducting single photon detectors (SSPDs). To this purpose, we fabricated a 250nm wide and 250nm long WSi nanowire and measured its response to impinging photons with wavelengths ranging from $λ$ = 900 nm to $λ$ = 1650 nm. Tomographic measurements show that the detector response depends on the total excitation energy only. Moreover, for energies Et > 0.8eV the current energy relation is linear, similar to what was observed in NbN nanowires, whereas the current-energy relation deviates from linear behaviour for total energies below 0.8eV.

cond-mat.mes-hall↗

Quantum teleportation over 100 km of fiber using highly-efficient superconducting nanowire single photon detectors

Quantum teleportation is an essential quantum operation by which we can transfer an unknown quantum state to a remote location with the help of quantum entanglement and classical communication. Since the first experimental demonstrations using photonic qubits and continuous variables, the distance of photonic quantum teleportation over free space channels has continued to increase and has reached >100 km. On the other hand, quantum teleportation over optical fiber has been challenging, mainly because the multi-fold photon detection that inevitably accompanies quantum teleportation experiments has been very inefficient due to the relatively low detection efficiencies of typical telecom-band single photon detectors. Here, we report efficient quantum teleportation over optical fiber using four high-detection efficiency superconducting nanowire superconducting single-photon detectors (SNSPD) based on MoSi. These SNSPDs make it possible to perform highly-efficient multi-fold photon measurements, allowing us to confirm that the quantum states of input photons were successfully teleported over 100 km of fiber.

quant-ph↗

Quantum-correlated photon pairs generated in a commercial 45nm complementary metal-oxide semiconductor microelectronics chip

Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronics. Here we report the first demonstration of quantum-correlated photon pair generation in a device fabricated in an unmodified advanced (sub-100nm) complementary metal-oxide-semiconductor (CMOS) process, alongside millions of working transistors. The microring resonator photon pair source is formed in the transistor layer structure, with the resonator core formed by the silicon layer typically used for the transistor body. With ultra-low continuous-wave on-chip pump powers ranging from 5 $μ$W to 400 $μ$W, we demonstrate pair generation rates between 165 Hz and 332 kHz using >80% efficient WSi superconducting nanowire single photon detectors. Coincidences-to-accidentals ratios consistently exceeding 40 were measured with a maximum of 55. In the process of characterizing this source we also accurately predict pair generation rates from the results of classical four-wave mixing measurements. This proof-of-principle device demonstrates the potential of commercial CMOS microelectronics as an advanced quantum photonics platform with capability of large volume, pristine process control, and where state-of-the-art high-speed digital circuits could interact with quantum photonic circuits.

physics.optics↗

Near-infrared single-photon spectroscopy of a whispering gallery mode resonator using energy-resolving transition edge sensors

We demonstrate a method to perform spectroscopy of near-infrared single photons without the need of dispersive elements. This method is based on a photon energy resolving transition edge sensor and is applied for the characterization of widely wavelength tunable narrow-band single photons emitted from a crystalline whispering gallery mode resonator. We measure the emission wavelength of the generated signal and idler photons with an uncertainty of up to 2 nm.

quant-ph↗

Highly efficient generation of single-mode photon pairs using a crystalline whispering gallery mode resonator

We report a highly efficient source of narrow-band photon pairs based on parametric down-conversion in a crystalline whispering gallery mode resonator. Remarkably, each photon of a pair is strictly emitted into a single spatial and temporal mode, as witnessed by Glaubers autocorrelation function. We explore the phase-matching conditions in spherical geometries, and determine the requirements of the single-mode operation. Understanding these conditions has allowed us to experimentally demonstrate a single-mode pair-detection rate of $0.97 \cdot 10^6$ pairs/s per mW pump power per 20 MHz bandwidth without the need of additional filter cavities.

quant-ph↗

Generation of degenerate, factorizable, pulsed squeezed light at telecom wavelengths

We characterize a periodically poled KTP crystal that produces an entangled, two-mode, squeezed state with orthogonal polarizations, nearly identical, factorizable frequency modes, and few photons in unwanted frequency modes. We focus the pump beam to create a nearly circular joint spectral probability distribution between the two modes. After disentangling the two modes, we observe Hong-Ou-Mandel interference with a raw (background corrected) visibility of 86 % (95 %) when an 8.6 nm bandwidth spectral filter is applied. We measure second order photon correlations of the entangled and disentangled squeezed states with both superconducting nanowire single-photon detectors and photon-number-resolving transition-edge sensors. Both methods agree and verify that the detected modes contain the desired photon number distributions.

quant-ph↗

Higher-order photon correlations in pulsed photonic crystal nanolasers

We report on the higher-order photon correlations of a high-$β$ nanolaser under pulsed excitation at room temperature. Using a multiplexed four-element superconducting single photon detector we measured g$^{(n)}(\vec{0})$ with $n$=2,3,4. All orders of correlation display partially chaotic statistics, even at four times the threshold excitation power. We show that this departure from coherence and Poisson statistics is due to the quantum fluctuations associated with the small number of dipoles and photons involved in the lasing process.

physics.optics↗

Observation of Transparency of Erbium-doped Silicon nitride in photonic crystal nanobeam cavities

One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump powers. The resonators demonstrate Purcell enhanced absorption and emission rates, also confirmed by time-resolved measurements. Resonances exhibit linewidth narrowing with pump power, signifying absorption bleaching and the onset of stimulated emission in the material at both 5.5 K and room temperature. We estimate from the cavity linewidths that Er has been pumped to transparency at the cavity resonance wavelength.

physics.optics↗

Single-photon detection timing jitter in a visible light photon counter

Visible light photon counters (VLPCs) offer many attractive features as photon detectors, such as high quantum efficiency and photon number resolution. We report measurements of the single-photon timing jitter in a VLPC, a critical performance factor in a time-correlated single-photon counting measurement, in a fiber-coupled closed-cycle cryocooler. The measured timing jitter is 240 ps full-width-at-half-maximum at a wavelength of 550 nm, with a dark count rate of 25 000 counts per second. The timing jitter increases modestly at longer wavelengths to 300 ps at 1000 nm, and increases substantially at lower bias voltages as the quantum efficiency is reduced.

physics.ins-det↗

Single-photon source characterization with infrared-sensitive superconducting single-photon detectors

Single-photon sources and detectors are key enabling technologies in quantum information processing. Nanowire-based superconducting single-photon detectors (SSPDs) offer single-photon detection from the visible well into the infrared with low dark counts, low jitter and short dead times. We report on the high fidelity characterization (via antibunching and spontaneous emission lifetime measurements) of a cavity-coupled single-photon source at 902 nm using a pair of SSPDs. The twin SSPD scheme reported here is well-suited to the characterization of single-photon sources at telecom wavelengths (1310 nm, 1550 nm).

quant-ph↗

Single photon source characterization with a superconducting single photon detector

Superconducting single photon detectors (SSPD) based on nanopatterned niobium nitride wires offer single photon counting at fast rates, low jitter, and low dark counts, from visible wavelengths well into the infrared. We demonstrate the first use of an SSPD, packaged in a commercial cryocooler, for single photon source characterization. The source is an optically pumped, microcavity-coupled InGaAs quantum dot, emitting single photons on demand at 902 nm. The SSPD replaces the second silicon Avalanche Photodiode (APD) in a Hanbury-Brown Twiss interferometer measurement of the source second-order correlation function, g (2) (tau). The detection efficiency of the superconducting detector system is >2 % (coupling losses included). The SSPD system electronics jitter is 170 ps, versus 550 ps for the APD unit, allowing the source spontaneous emission lifetime to be measured with improved resolution.

quant-ph↗