arXiv subjects

Martin Landriau

Publications and source records attributed to Martin Landriau.

At least 145 records · Page 8Linked to original sources

arXiv2021

The DESI $N$-body Simulation Project I: Testing the Robustness of Simulations for the DESI Dark Time Survey

Analysis of large galaxy surveys requires confidence in the robustness of numerical simulation methods. The simulations are used to construct mock galaxy catalogs to validate data analysis pipelines and identify potential systematics. We compare three $N$-body simulation codes, ABACUS, GADGET, and SWIFT, to investigate the regimes in which their results agree. We run $N$-body simulations at three different mass resolutions, $6.25\times10^{8}$, $2.11\times10^{9}$, and $5.00\times10^{9}~h^{-1}$M$_{\odot}$, matching phases to reduce the noise within the comparisons. We find systematic errors in the halo clustering between different codes are smaller than the DESI statistical error for $s > 20\, h^{-1}$Mpc in the correlation function in redshift space. Through the resolution comparison we find that simulations run with a mass resolution of $2.1\times10^{9}~h^{-1}$M$_{\odot}$ are sufficiently converged for systematic effects in the halo clustering to be smaller than the DESI statistical error at scales larger than $20 \, h^{-1}$Mpc. These findings show that the simulations are robust for extracting cosmological information from large scales which is the key goal of the DESI survey. Comparing matter power spectra, we find the codes agree to within 1% for $k \leq 10~h$Mpc$^{-1}$. We also run a comparison of three initial condition generation codes and find good agreement. In addition, we include a quasi-$N$-body code, FastPM, since we plan use it for certain DESI analyses. The impact of the halo definition and galaxy-halo relation will be presented in a follow up study.

astro-ph.CO↗

arXiv2021

The HETDEX Instrumentation: Hobby-Eberly Telescope Wide Field Upgrade and VIRUS

The Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) is undertaking a blind wide-field low-resolution spectroscopic survey of 540 square degrees of sky to identify and derive redshifts for a million Lyman-alpha emitting galaxies (LAEs) in the redshift range 1.9 < z < 3.5. The ultimate goal is to measure the expansion rate of the Universe at this epoch, to sharply constrain cosmological parameters and thus the nature of dark energy. A major multi-year wide field upgrade (WFU) of the HET was completed in 2016 that substantially increased the field of view to 22 arcminutes diameter and the pupil to 10 meters, by replacing the optical corrector, tracker, and prime focus instrument package and by developing a new telescope control system. The new, wide-field HET now feeds the Visible Integral-field Replicable Unit Spectrograph (VIRUS), a new low-resolution integral field spectrograph (LRS2), and the Habitable Zone Planet Finder (HPF), a precision near-infrared radial velocity spectrograph. VIRUS consists of 156 identical spectrographs fed by almost 35,000 fibers in 78 integral field units arrayed at the focus of the upgraded HET. VIRUS operates in a bandpass of 3500-5500 Angstroms with resolving power R~800. VIRUS is the first example of large scale replication applied to instrumentation in optical astronomy to achieve spectroscopic surveys of very large areas of sky. This paper presents technical details of the HET WFU and VIRUS, as flowed-down from the HETDEX science requirements, along with experience from commissioning this major telescope upgrade and the innovative instrumentation suite for HETDEX.

astro-ph.IM↗

arXiv2021

The Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) Survey Design, Reductions, and Detections

We describe the survey design, calibration, commissioning, and emission-line detection algorithms for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The goal of HETDEX is to measure the redshifts of over a million Ly$α$ emitting galaxies between 1.88<z<3.52, in a 540 deg^2 area encompassing a co-moving volume of 10.9 Gpc^3. No pre-selection of targets is involved; instead the HETDEX measurements are accomplished via a spectroscopic survey using a suite of wide-field integral field units distributed over the focal plane of the telescope. This survey measures the Hubble expansion parameter and angular diameter distance, with a final expected accuracy of better than 1%. We detail the project's observational strategy, reduction pipeline, source detection, and catalog generation, and present initial results for science verification in the COSMOS, Extended Groth Strip, and GOODS-N fields. We demonstrate that our data reach the required specifications in throughput, astrometric accuracy, flux limit, and object detection, with the end products being a catalog of emission-line sources, their object classifications, and flux-calibrated spectra.

astro-ph.IM↗

arXiv2021

First HETDEX Spectroscopic Determinations of Ly$α$ and UV Luminosity Functions at $z=2-3$: Bridging a Gap Between Faint AGN and Bright Galaxies

We present Ly$α$ and ultraviolet-continuum (UV) luminosity functions (LFs) of galaxies and active galactic nuclei (AGN) at $z=2.0-3.5$ determined by the un-targetted optical spectroscopic survey of the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). We combine deep Subaru imaging with HETDEX spectra resulting in $11.4$ deg$^2$ of fiber-spectra sky coverage, obtaining $18320$ galaxies spectroscopically identified with Ly$α$ emission, $2126$ of which host type 1 AGN showing broad (FWHM$~>1000$ km s$^{-1}$) Ly$α$ emission lines. We derive the Ly$α$ (UV) LF over 2 orders of magnitude covering bright galaxies and AGN in $\log L_\mathrm{Lyα}/\mathrm{[erg~s^{-1}]}=43.3-45.5$ ($-27 -21$) type 1 AGN increases from $z\sim2$ to $z\sim0$ as opposed to the evolution of bright ($M_\mathrm{UV}<-21$) type 1 AGN, suggesting the AGN downsizing in the rest-frame UV luminosity.

astro-ph.GA↗

arXiv2021

Correcting correlation functions for redshift-dependent interloper contamination

The construction of catalogues of a particular type of galaxy can be complicated by interlopers contaminating the sample. In spectroscopic galaxy surveys this can be due to the misclassification of an emission line; for example in the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) low redshift [OII] emitters may make up a few percent of the observed Ly$α$ emitter (LAE) sample. The presence of contaminants affects the measured correlation functions and power spectra. Previous attempts to deal with this using the cross-correlation function have assumed sources at a fixed redshift, or not modelled evolution within the adopted redshift bins. However, in spectroscopic surveys like HETDEX, where the contamination fraction is likely to be redshift dependent, the observed clustering of misclassified sources will appear to evolve strongly due to projection effects, even if their true clustering does not. We present a practical method for accounting for the presence of contaminants with redshift-dependent contamination fractions and projected clustering. We show using mock catalogues that our method, unlike existing approaches, yields unbiased clustering measurements from the upcoming HETDEX survey in scenarios with redshift-dependent contamination fractions within the redshift bins used. We show our method returns auto-correlation functions with systematic biases much smaller than the statistical noise for samples with at least as high as 7 per cent contamination. We also present and test a method for fitting for the redshift-dependent interloper fraction using the LAE-[OII] galaxy cross-correlation function, which gives less biased results than assuming a single interloper fraction for the whole sample.

astro-ph.CO↗

arXiv2021

Detection of Lyman Continuum from 3.0 < z < 3.5 Galaxies in the HETDEX Survey

Questions as to what drove the bulk reionization of the Universe, how that reionization proceeded, and how the hard ionizing radiation reached the intergalactic medium remain open and debated. Observations probing that epoch are severely hampered by the increasing amounts of neutral gas with increasing redshift, so a small, but growing number of experiments are targeting star forming galaxies ($z\sim3$) as proxies. However, these studies, while providing fantastic detail, are time intensive, contain relatively few targets, and can suffer from selection biases. As a complementary alternative, we investigate whether stacking the already vast (and growing) numbers of low-resolution ($Δλ/ λ= 800$) Lyman-$α$ Emitting (LAE) galaxy spectra from the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) can be used to measure ionizing photons (restframe 880-910Å) escaping their galaxy hosts. As a blind survey, HETDEX avoids the biases from continuum selected galaxies and its planned 540 square degree coverage promotes the statistical power of large numbers. In this paper, we confirm the feasibility of Lyman continuum detection by carefully selecting a sample of \lyccount\ high redshift ($z\sim$3) LAEs from a subset of HETDEX observations, stacking their spectra and measuring a $\gtrsim$3$σ$ detection of $0.10 μ$Jy restframe Lyman continuum emission, uncorrected for attenuation in the intergalactic medium, over the full sample stack ($3.0 < z < 3.5$ and $-22.0 \lesssim M_{\text{UV}} \lesssim -19.0$).

astro-ph.GA↗

arXiv2021

Preliminary clustering properties of the DESI BGS bright targets using DR9 Legacy Imaging Surveys

We characterise the selection cuts and clustering properties of a magnitude-limited sample of bright galaxies that is part of the Bright Galaxy Survey (BGS) of the Dark Energy Spectroscopic Instrument (DESI) using the ninth data release of the Legacy Imaging Surveys (DR9). We describe changes in the DR9 selection compared to the DR8 one as explored in Ruiz-Macias et al. (2021). We also compare the DR9 selection in three distinct regions: BASS/MzLS in the north Galactic Cap (NGC), DECaLS in the NGC, and DECaLS in the south Galactic Cap (SGC). We investigate the systematics associated with the selection and assess its completeness by matching the BGS targets with the Galaxy and Mass Assembly (GAMA) survey. We measure the angular clustering for the overall bright sample (r $\leq$ 19.5) and as function of apparent magnitude and colour. This enables to determine the clustering strength and slope by fitting a power-law model that can be used to generate accurate mock catalogues for this tracer. We use a counts-in-cells technique to explore higher-order statistics and cross-correlations with external spectroscopic data sets in order to check the evolution of the clustering with redshift and the redshift distribution of the BGS targets using clustering-redshifts. While this work validates the properties of the BGS bright targets, the final target selection pipeline and clustering properties of the entire DESI BGS will be fully characterised and validated with the spectroscopic data of Survey Validation.

astro-ph.GA↗

arXiv2021

Characterising the target selection pipeline for the Dark Energy Spectroscopic Instrument Bright Galaxy Survey

We present the steps taken to produce a reliable and complete input galaxy catalogue for the Dark Energy Spectroscopic Instrument (DESI) Bright Galaxy Survey (BGS) using the photometric Legacy Survey DR8 DECam. We analyse some of the main issues faced in the selection of targets for the DESI BGS, such as star-galaxy separation, contamination by fragmented stars and bright galaxies. Our pipeline utilizes a new way to select BGS galaxies using Gaia photometry and we implement geometrical and photometric masks that reduce the number of spurious objects. The resulting catalogue is cross-matched with the Galaxy And Mass Assembly (GAMA) survey to assess the completeness of the galaxy catalogue and the performance of the target selection. We also validate the clustering of the sources in our BGS catalogue by comparing with mock catalogues and the Sloan Digital Sky Survey (SDSS) data. Finally, the robustness of the BGS selection criteria is assessed by quantifying the dependence of the target galaxy density on imaging and other properties. The largest systematic correlation we find is a 7 per cent suppression of the target density in regions of high stellar density.

astro-ph.GA↗

arXiv2021

The Clustering of DESI-like Luminous Red Galaxies Using Photometric Redshifts

We present measurements of the redshift-dependent clustering of a DESI-like luminous red galaxy (LRG) sample selected from the Legacy Survey imaging dataset, and use the halo occupation distribution (HOD) framework to fit the clustering signal. The photometric LRG sample in this study contains 2.7 million objects over the redshift range of $0.4 < z < 0.9$ over 5655 deg$^2$. We have developed new photometric redshift (photo-$z$) estimates using the Legacy Survey DECam and WISE photometry, with $σ_{\mathrm{NMAD}} = 0.02$ precision for LRGs. We compute the projected correlation function using new methods that maximize signal-to-noise ratio while incorporating redshift uncertainties. We present a novel algorithm for dividing irregular survey geometries into equal-area patches for jackknife resampling. For a five-parameter HOD model fit using the MultiDark halo catalog, we find that there is little evolution in HOD parameters except at the highest redshifts. The inferred large-scale structure bias is largely consistent with constant clustering amplitude over time. In an appendix, we explore limitations of Markov chain Monte Carlo fitting using stochastic likelihood estimates resulting from applying HOD methods to N-body catalogs, and present a new technique for finding best-fit parameters in this situation. Accompanying this paper we have released the Photometric Redshifts for the Legacy Surveys (PRLS) catalog of photo-$z$'s obtained by applying the methods used in this work to the full Legacy Survey Data Release 8 dataset. This catalog provides accurate photometric redshifts for objects with $z < 21$ over more than 16,000 deg$^2$ of sky.

astro-ph.CO↗

arXiv2021

Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall's Serrurier truss and replaced with the newly-constructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall's primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

astro-ph.IM↗

arXiv2021

The DESI Sky Continuum Monitor System

The Dark Energy Spectroscopic Instrument (DESI) is an ongoing spectroscopic survey to measure the dark energy equation of state to unprecedented precision. We describe the DESI Sky Continuum Monitor System, which tracks the night sky brightness as part of a system that dynamically adjusts the spectroscopic exposure time to produce more uniform data quality and to maximize observing efficiency. The DESI dynamic exposure time calculator (ETC) will combine sky brightness measurements from the Sky Monitor with data from the guider system to calculate the exposure time to achieve uniform signal-to-noise ratio (SNR) in the spectra under various observing conditions. The DESI design includes 20 sky fibers, and these are split between two identical Sky Monitor units to provide redundancy. Each Sky Monitor unit uses an SBIG STXL-6303e CCD camera and supports an eight-position filter wheel. Both units have been completed and delivered to the Mayall Telescope at the Kitt Peak National Observatory. Commissioning results show that the Sky Monitor delivers the required performance necessary for the ETC.

astro-ph.IM↗

arXiv2021

Performance of Kitt Peak's Mayall 4-meter Telescope During DESI Commissioning

In preparation for the Dark Energy Spectroscopic Instrument (DESI), a new top end was installed on the Mayall 4-meter telescope at Kitt Peak National Observatory. The refurbished telescope and the DESI instrument were successfully commissioned on sky between 2019 October and 2020 March. Here we describe the pointing, tracking and imaging performance of the Mayall telescope equipped with its new DESI prime focus corrector, as measured by six guider cameras sampling the outer edge of DESI's focal plane. Analyzing ~500,000 guider images acquired during commissioning, we find a median delivered image FWHM of 1.1 arcseconds (in the r-band at 650 nm), with the distribution extending to a best-case value of ~0.6 arcseconds. The point spread function is well characterized by a Moffat profile with a power-law index of $β$ ~ 3.5 and little dependence of $β$ on FWHM. The shape and size of the PSF delivered by the new corrector at a field angle of 1.57 degrees are very similar to those measured with the old Mayall corrector on axis. We also find that the Mayall achieves excellent pointing accuracy (several arcseconds RMS) and minimal open-loop tracking drift (< 1 milliarcsecond per second), improvements on the telecope's pre-DESI performance. In the future, employing DESI's active focus adjustment capabilities will likely further improve the Mayall/DESI delivered image quality.

astro-ph.IM↗

arXiv2020

Preliminary Target Selection for the DESI Quasar (QSO) Sample

The DESI survey will measure large-scale structure using quasars as direct tracers of dark matter in the redshift range $0.9 2.1$. We present two methods to select candidate quasars for DESI based on imaging in three optical ($g, r, z$) and two infrared ($W1, W2$) bands. The first method uses traditional color cuts and the second utilizes a machine-learning algorithm.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Emission Line Galaxy (ELG) Sample

DESI will precisely constrain cosmic expansion and the growth of structure by collecting $\sim$35 million redshifts across $\sim$80% of cosmic history and one third of the sky to study Baryon Acoustic Oscillations (BAO) and Redshift Space Distortions (RSD). We present a preliminary target selection for an Emission Line Galaxy (ELG) sample, which will comprise about half of all DESI tracers. The selection consists of a $g$-band magnitude cut and a $(g-r)$ vs. $(r-z)$ color box, which we validate using HSC/PDR2 photometric redshifts and DEEP2 spectroscopy. The ELG target density should be $\sim$2400 deg$^{-2}$, with $\sim$65% of ELG redshifts reliably within a redshift range of $0.6<z<1.6$. ELG targeting for DESI will be finalized during a `Survey Validation' phase.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Luminous Red Galaxy (LRG) Sample

The DESI survey will observe more than 8 million candidate luminous red galaxies (LRGs) in the redshift range $0.3<z<1.0$. Here we present a preliminary version of the DESI LRG target selection developed using Legacy Surveys Data Release 8 $g$, $r$, $z$ and $W1$ photometry. This selection yields a sample with a uniform surface density of ${\sim}\,600$ deg$^{-2}$and very low predicted stellar contamination and redshift failure rates. During DESI Survey Validation, updated versions of this selection will be tested and optimized.

astro-ph.CO↗

arXiv2020

Preliminary Target Selection for the DESI Milky Way Survey (MWS)

The DESI Milky Way Survey (MWS) will observe $\ge$8 million stars between $16 < r < 19$ mag, supplemented by observations of brighter targets under poor observing conditions. The survey will permit an accurate determination of stellar kinematics and population gradients; characterize diffuse substructure in the thick disk and stellar halo; enable the discovery of extremely metal-poor stars and other rare stellar types; and improve constraints on the Galaxy's 3D dark matter distribution from halo star kinematics. MWS will also enable a detailed characterization of the stellar populations within 100 pc of the Sun, including a complete census of white dwarfs. The target catalog from the preliminary selection described here is public.

astro-ph.GA↗

arXiv2020

Preliminary Target Selection for the DESI Bright Galaxy Survey (BGS)

The Dark Energy Spectroscopic Instrument (DESI) will execute a nearly magnitude-limited survey of low redshift galaxies ($0.05 \leq z \leq 0.4$, median $z \approx 0.2$). Clustering analyses of this Bright Galaxy Survey (BGS) will yield the most precise measurements to date of baryon acoustic oscillations and redshift-space distortions at low redshift. DESI BGS will comprise two target classes: (i) BRIGHT ($r<19.5$~mag), and (ii) FAINT ($19.5<r<20$~mag). Here we present a summary of the star-galaxy separation, and different photometric and geometrical masks, used in BGS to reduce the number of spurious targets. The selection results in a total density of $\sim 800$ objects/deg$^2$ for the BRIGHT and $\sim 600$ objects/deg$^2$ for the FAINT selections.A full characterization of the BGS selection can be found in Ruiz-Macias et al. (2020).

astro-ph.GA↗

arXiv2020

Baryon Acoustic Oscillations in the projected cross-correlation function between the eBOSS DR16 quasars and photometric galaxies from the DESI Legacy Imaging Surveys

We search for the Baryon Acoustic Oscillations in the projected cross-correlation function binned into transverse comoving radius between the SDSS-IV DR16 eBOSS quasars and a dense photometric sample of galaxies selected from the DESI Legacy Imaging Surveys. We estimate the density of the photometric sample of galaxies in this redshift range to be about 2900 deg$^{-2}$, which is deeper than the official DESI ELG selection, and the density of the spectroscopic sample is about 20 deg$^{-2}$. In order to mitigate the systematics related to the use of different imaging surveys close to the detection limit, we use a neural network approach that accounts for complex dependencies between the imaging attributes and the observed galaxy density. We find that we are limited by the depth of the imaging surveys which affects the density and purity of the photometric sample and its overlap in redshift with the quasar sample, which thus affects the performance of the method. When cross-correlating the photometric galaxies with quasars in $0.6 \leq z \leq 1.2$, the cross-correlation function can provide better constraints on the comoving angular distance, $D_{\rm M}$ (6\% precision) compared to the constraint on the spherically-averaged distance $D_{\rm V}$ (9\% precision) obtained from the auto-correlation. Although not yet competitive, this technique will benefit from the arrival of deeper photometric data from upcoming surveys which will enable it to go beyond the current limitations we have identified in this work.

astro-ph.CO↗