arXiv subjects

Martin M. Fejer

Publications and source records attributed to Martin M. Fejer.

At least 19 recordsLinked to original sources

arXiv2026

Practical Limits on Integrated Squeezers

Recent experiments have demonstrated the successful generation and detection of moderately squeezed vacuum states with integrated photonics. However, in order to benefit from the reduced noise of highly squeezed light, many different noise sources must be mitigated. Here, we quantify the fundamental limits these noise sources impose on squeezing measurements and find surprising generality across different platforms and designs. We combine these different limitations into a simple model that provides practical guidance for the design and benchmarking of next-generation integrated squeezed-light systems.

quant-ph↗

arXiv2026

Ultra-wideband electrically-tuned mid-infrared on-chip parametric oscillator

Developing compact, broadband mid-infrared coherent sources for applications in spectroscopy and sensing remains a pressing challenge in photonics. However, material limitations and integration constraints have restricted the accessible wavelengths and operation bandwidths of current mid-infrared lasers. Here, we address these challenges by developing a nonlinear integrated photonic device that converts a fixed-wavelength near-infrared pump laser into broadly tunable mid-infrared light. Our device, an optical parametric oscillator (OPO) integrated on thin-film lithium niobate, generates 22 THz of multi-milliwatt, voltage-tunable radiation from 2.7-3.4 microns, a region typically difficult to access but vital for environmental, chemical, and biological sensing. By introducing an on-chip-tunable OPO architecture taking advantage of the Vernier effect, we obtain electrical control of the emission wavelengths from coarse, multi-THz scales down to continuous, sub-100-GHz mode-hop-free tuning ranges. This work establishes a robust platform for a new class of compact, widely tunable mid-infrared sources with potential for future scaling.

physics.optics↗

arXiv2026

Ultrabroadband Passive Laser Noise Suppression to Quantum Noise Limit through on-chip Second Harmonic Generation

Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators are constrained by narrow linewidths and locking requirements. Here, we demonstrate an all-optical "noise eater" that passively suppresses intensity fluctuations from DC to >10 gigahertz. By leveraging high-efficiency second-harmonic generation in nanophotonic lithium niobate waveguides, we operate at a pump-depletion stationary point where input fluctuations are decoupled from the output to first order. This passive and nonresonant nanophotonic device suppresses relative intensity noise by 25 to 60 dB over the full measurement bandwidth and stabilizes a noisy fiber amplifier output to the shot-noise limit. Our results establish a scalable, wide-bandwidth paradigm for laser stabilization essential for high-throughput quantum technologies and deployable photonic sensing systems.

physics.optics↗

arXiv2025

Low-power integrated optical parametric amplification via second-harmonic resonance

Optical amplifiers are fundamental to modern photonics, enabling long-distance communications, precision sensing, and quantum information processing. Erbium-doped amplifiers dominate telecommunications but are restricted to specific wavelength bands, while semiconductor amplifiers offer broader coverage but suffer from high noise and nonlinear distortions. Optical parametric amplifiers (OPAs) promise broadband, quantum-limited amplification across arbitrary wavelengths. However, their miniaturization and deployment has been hampered by watt-level power requirements. Here we demonstrate an integrated OPA on thin-film lithium niobate that achieves >17 dB gain with <200 mW input power -- an order of magnitude improvement over previous demonstrations. Our second-harmonic-resonant design enhances both pump generation efficiency (95% conversion) and pump power utilization through recirculation, without sacrificing bandwidth. The resonant architecture increases the effective pump power by nearly an order of magnitude compared to conventional single-pass designs, while also multiplexing the signal and pump. We demonstrate flat near-quantum-limited noise performance over 110 nm. Our low-power architecture enables practical on-chip OPAs for next generation quantum and classical photonics.

physics.optics↗

arXiv2025

Roughness-Limited Performance in Ultra-Low-Loss Lithium Niobate Cavities

Achieving low optical loss is critical for scaling complex photonic systems. Thin-film lithium niobate (TFLN) offers strong electro-optic and nonlinear properties in a compact platform, making it ideal for quantum and nonlinear optics. While $Q$ factors above $10^7$ have been achieved, they remain below the intrinsic material limit. We present a systematic study of scattering losses due to roughness in TFLN racetrack cavities, isolating contributions from sidewall and interface roughness. Quality factors up to $27 \times 10^6$ are demonstrated in waveguides with widths of $2.2\lambda$ ($\sim3.5\,\mu$m), where interface roughness dominates, and up to $1.2 \times 10^7$ in narrower waveguides $0.8\lambda$ wide ($\sim1.2\,\mu$m), where sidewall roughness is the primary limitation. Our modeling framework, based on 3D wave simulations informed by AFM-measured roughness, is material-independent and broadly applicable across integrated photonic platforms.

physics.optics↗

arXiv2025

Machine Learning Assisted Modeling of Amorphous TiO$_2$-Doped GeO$_2$ for Advanced LIGO Mirror Coatings

The mechanical loss angle of amorphous TiO$_2$-doped GeO$_2$ can be lower than 10$^{-4}$, making it a candidate for Laser Interferometer Gravitational-wave Observatory (LIGO) mirror coatings. Amorphous oxides have complex atomic structures that are influenced by various factors, including doping concentration, preparation, and thermal history, resulting in different mass densities and physical properties. Modeling at atomistic level enables capturing these effects by generating atomic structure models according to experimental conditions. In order to obtain reliable and physical amorphous models at an affordable cost, we develop classical and machine-learning potentials (MLP) to speed up simulations. First-principles calculations are used to train and validate MLP as well as validating structure models. To better reproduce properties such as elastic modulus, radial distribution function (RDF) and the variations in mass density of doped amorphous oxides, density functional theory (DFT) calculations are used to optimize the final models. We find that the mass densities of amorphous systems are correlated with the total void volume. The experimental mass density matches the models with the most symmetric potential energy wells under volume change. The elastic response of the metal-oxygen network is also studied. The 27\% TiO$_2$ doped GeO$_2$ system shows the least number of large atom-atom distance changes, while for 44\% TiO$_2$ doped GeO$_2$, a majority of Ti-O distances are significantly changed. In response to strains, the metal-oxygen network at low mass densities prefers to adjust bond angles, while at high mass densities, the adjustment is mainly done by changing atom-atom distance.

cond-mat.mtrl-sci↗

arXiv2023

Single-Mode Squeezed Light Generation and Tomography with an Integrated Optical Parametric Oscillator

Quantum optical technologies promise advances in sensing, computing, and communication. A key resource is squeezed light, where quantum noise is redistributed between optical quadratures. We introduce a monolithic, chip-scale platform that exploits the $\chi^{(2)}$ nonlinearity of a thin-film lithium niobate (TFLN) resonator device to efficiently generate squeezed states of light. Our system integrates all essential components -- except for the laser and two detectors -- on a single chip with an area of one square centimeter, significantly reducing the size, operational complexity, and power consumption associated with conventional setups. Our work addresses challenges that have limited previous integrated nonlinear photonic implementations that rely on either $\chi^{(3)}$ nonlinear resonators or on integrated waveguide $\chi^{(2)}$ parametric amplifiers. Using the balanced homodyne measurement subsystem that we implemented on the same chip, we measure a squeezing of 0.55 dB and an anti-squeezing of 1.55 dB. We use 20 mW of input power to generate the parametric oscillator pump field by employing second harmonic generation on the same chip. Our work represents a substantial step toward compact and efficient quantum optical systems posed to leverage the rapid advances in integrated nonlinear and quantum photonics.

quant-ph↗

arXiv2023

Telecom networking with a diamond quantum memory

Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy (SiV) center in diamond to the telecom O-band, maintaining low noise ($g^2(0)<0.1$) and high indistinguishability ($V=89\pm8\%$). We further demonstrate the utility of this system for quantum networking by converting telecom-band time-bin pulses, sent across a lossy and noisy 50 km deployed fiber link, to the visible band and mapping their quantum states onto a diamond quantum memory with fidelity $\mathcal{F}=87\pm 2.5 \% $. These results demonstrate the viability of SiV quantum memories integrated with telecom-band systems for scalable quantum networking applications.

quant-ph↗

arXiv2023

Mid-infrared spectroscopy with a broadly tunable thin-film lithium niobate optical parametric oscillator

Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encountered barriers stemming from sources either limited in tuning range or excessively bulky for practical field use. We present a compact, efficient, and broadly tunable optical parametric oscillator (OPO) device surmounting these challenges. Leveraging a dispersion-engineered singly-resonant OPO implemented in thin-film lithium niobate-on-sapphire, we achieve broad and controlled tuning over an octave, from 1.5 to 3.3 microns by combining laser and temperature tuning. The device generates > 25 mW of mid-infrared light at 3.2 microns, offering a power conversion efficiency of 15% (45% quantum efficiency). We demonstrate the tuning and performance of the device by successfully measuring the spectra of methane and ammonia, verifying our approach's relevance for gas sensing. Our device signifies an important advance in nonlinear photonics miniaturization and brings practical field applications of high-speed and broadband mid-infrared spectroscopy closer to reality.

physics.optics↗

arXiv2023

Integrated frequency-modulated optical parametric oscillator

Optical frequency combs have revolutionized precision measurement, time-keeping, and molecular spectroscopy. A substantial effort has developed around "microcombs": integrating comb-generating technologies into compact, reliable photonic platforms. Current approaches for generating these microcombs involve either the electro-optic (EO) or Kerr mechanisms. Despite rapid progress, maintaining high efficiency and wide bandwidth remains challenging. Here, we introduce a new class of microcomb -- an integrated optical frequency comb generator that combines electro-optics and parametric amplification to yield a frequency-modulated optical parametric oscillator (FM-OPO). In stark contrast to EO and Kerr combs, the FM-OPO microcomb does not form pulses but maintains operational simplicity and highly efficient pump power utilization with an output resembling a frequency-modulated laser. We outline the working principles of FM-OPO and demonstrate them by fabricating the complete optical system in thin-film lithium niobate (LNOI). We measure pump to comb internal conversion efficiency exceeding 93% (34% out-coupled) over a nearly flat-top spectral distribution spanning approximately 1,000 modes (approximately 6 THz). Compared to an EO comb, the cavity dispersion rather than loss determines the FM-OPO bandwidth, enabling broadband combs with a smaller RF modulation power. The FM-OPO microcomb, with its robust operational dynamics, high efficiency, and large bandwidth, contributes a new approach to the field of microcombs and promises to herald an era of miniaturized precision measurement, and spectroscopy tools to accelerate advancements in metrology, spectroscopy, telecommunications, sensing, and computing.

physics.optics↗

arXiv2022

Integrated Quantum Optical Phase Sensor

The quantum noise of light fundamentally limits optical phase sensors. A semiclassical picture attributes this noise to the random arrival time of photons from a coherent light source such as a laser. An engineered source of squeezed states suppresses this noise and allows sensitivity beyond the standard quantum limit (SQL) for phase detection. Advanced gravitational wave detectors like LIGO have already incorporated such sources, and nascent efforts in realizing quantum biological measurements have provided glimpses into new capabilities emerging in quantum measurement. We need ways to engineer and use quantum light within deployable quantum sensors that operate outside the confines of a lab environment. Here we present a photonic integrated circuit fabricated in thin-film lithium niobate that provides a path to meet these requirements. We use the second-order nonlinearity to produce a squeezed state at the same frequency as the pump light and realize circuit control and sensing with electro-optics. Using a 26.2 milliwatts of optical power, we measure (2.7 $\pm$ 0.2 )$\%$ squeezing and apply it to increase the signal-to-noise ratio of phase measurement. We anticipate that on-chip photonic systems like this, which operate with low power and integrate all of the needed functionality on a single die, will open new opportunities for quantum optical sensing.

quant-ph↗

arXiv2022

Quasi-static Optical Parametric Amplification

High-gain optical parametric amplification is an important nonlinear process used both as a source of coherent infrared light and as a source of nonclassical light. In this work, we experimentally demonstrate an approach to optical parametric amplification that enables extremely large parametric gains with low energy requirements. In conventional nonlinear media driven by femtosecond pulses, multiple dispersion orders limit the effective interaction length available for parametric amplification. Here, we use the dispersion engineering available in periodically poled thin-film lithium niobate nanowaveguides to eliminate several dispersion orders at once. The result is a quasi-static process; the large peak intensity associated with a short pump pulse can provide gain to signal photons without undergoing pulse distortion or temporal walk-off. We characterize the parametric gain available in these waveguides using optical parametric generation, where vacuum fluctuations are amplified to macroscopic intensities. When driven with pulse energies in excess of 10 pJ, we observe saturated parametric gains as large as 88 dB (146 dB/cm). The devices shown here achieve saturated optical parametric generation with orders of magnitude less pulse energy than previous techniques.

physics.optics↗

arXiv2021

Enhanced Medium Range Order in Vapor Deposited Germania Glasses at Elevated Temperatures

Glasses are nonequilibrium solids with properties highly dependent on their method of preparation. In vapor-deposited molecular glasses, structural organization could be readily tuned with deposition rate and substrate temperature. Herein, we show the atomic arrangement of strong network forming GeO2 glass is modified at medium range (< 2 nm) through vapor deposition at elevated temperatures. Raman spectral signatures distinctively show the population of 6-membered GeO4 rings increases at elevated substrate temperatures. Deposition near the glass transition temperature is more efficient than post-growth annealing in modifying atomic structure at medium range. The enhanced medium range organization correlates with reduction of the room temperature internal friction. Identifying the microscopic origin of room temperature internal friction in amorphous oxides is paramount to design the next generation interference coatings for mirrors of the end test masses of gravitational wave interferometers, in which the room temperature internal friction is a main source of noise limiting their sensitivity.

cond-mat.mtrl-sci↗

arXiv2021

Low mechanical loss TiO$_2$:GeO$_2$ coatings for reduced thermal noise in Gravitational Wave Interferometers

The sensitivity of current and planned gravitational wave interferometric detectors is limited, in the most critical frequency region around 100 Hz, by a combination of quantum noise and thermal noise. The latter is dominated by Brownian noise: thermal motion originating from the elastic energy dissipation in the dielectric coatings used in the interferometer mirrors. The energy dissipation is a material property characterized by the mechanical loss angle. We have identified mixtures of titanium dioxide (TiO$_2$) and germanium dioxide (GeO$_2$) that show internal dissipations at a level of 1 $\times 10^{-4}$, low enough to provide almost a factor of two improvement on the level of Brownian noise with respect to the state-of-the-art materials. We show that by using a mixture of 44% TiO$_2$ and 56% GeO$_2$ in the high refractive index layers of the interferometer mirrors, it would be possible to achieve a thermal noise level in line with the design requirements. These results are a crucial step forward to produce the mirrors needed to meet the thermal noise requirements for the planned upgrades of the Advanced LIGO and Virgo detectors.

physics.ins-det↗

arXiv2021

Ultra-low-power second-order nonlinear optics on a chip

Second-order nonlinear optical processes are used to convert light from one wavelength to another and to generate quantum entanglement. Creating chip-scale devices to more efficiently realize and control these interactions greatly increases the reach of photonics. Optical crystals and guided wave devices made from lithium niobate and potassium titanyl phosphate are typically used to realize second-order processes but face significant drawbacks in scalability, power, and tailorability when compared to emerging integrated photonic systems. Silicon or silicon nitride integrated photonic circuits enhance and control the third-order optical nonlinearity by confining light in dispersion-engineered waveguides and resonators. An analogous platform for second-order nonlinear optics remains an outstanding challenge in photonics. It would enable stronger interactions at lower power and reduce the number of competing nonlinear processes that emerge. Here we demonstrate efficient frequency doubling and parametric oscillation in a thin-film lithium niobate photonic circuit. Our device combines recent progress on periodically poled thin-film lithium niobate waveguidesand low-loss microresonators. Here we realize efficient >10% second-harmonic generation and parametric oscillation with microwatts of optical power using a periodically-poled thin-film lithium niobate microresonator. The operating regimes of this system are controlled using the relative detuning of the intracavity resonances. During nondegenerate oscillation, the emission wavelength is tuned over terahertz by varying the pump frequency by 100's of megahertz. We observe highly-enhanced effective third-order nonlinearities caused by cascaded second-order processes resulting in parametric oscillation. These resonant second-order nonlinear circuits will form a crucial part of the emerging nonlinear and quantum photonics platforms.

physics.optics↗

arXiv2020

Structural evolution of binary oxide nanolaminates with annealing and its impact on room-temperature internal friction

Internal friction in oxide thin films imposes a critical limitation to the sensitivity and stability of ultra-high finesse optical cavities for gravitational wave detectors. Strategies like doping or creating nanolaminates are sought to introduce structural modifications that reduce internal friction. This work describes an investigation of the morphological changes SiO2/Ta2O5 and TiO2/Ta2O5 nanolaminates undergo with annealing and their impact on room temperature internal friction. It is demonstrated that thermal treatment results in a reduction of internal friction in both nanolaminates, but through different pathways. In the SiO2/Ta2O5 nanolaminate, which layers remain intact after annealing, the total reduction in internal friction follows the reduction in the composing SiO2 and Ta2O5 layers. Instead, interdiffusion initiated by annealing at the interface of the TiO2/Ta2O5 nanolaminate and the formation of a mixed phase dictate a more significant reduction in internal friction to ~ 2.6 * 10-4, a value lower than any other Ta2O5 mixture coating with similar cation concentration.

cond-mat.mtrl-sci↗

arXiv2020

Broadband Parametric Downconversion as a Discrete-Continuum Fano Interaction

We introduce a theoretical framework based on Fano's theory of discrete-continuum interactions to analyze the quantum dynamics of broadband parametric downconversion (PDC) in the few-pump-photon regime of nonlinear quantum nanophotonics. Applying this unified analytic approach to 1D $χ^{(2)}$-nonlinear waveguides, we find a host of remarkable dynamical features due to the coupling of a discrete pump state to the signal continuum, from unit-efficiency (i.e., complete) downconversion when the coupling is dissipative, to Rabi-like oscillations with sub-exponential decay when it is dispersive. The theory provides a straightforward way to analytically compute a full characterization of the PDC dynamics, including the complete eigensystem of the continuum Hamiltonian and expressions for the signal biphoton correlation function. We also apply the theory to study a pair of linearly coupled $χ^{(2)}$ waveguides, where two discrete pump states simultaneously downconvert into a common-mode signal continuum, resulting in Fano interference that critically affects the PDC rate. Under appropriate conditions, the theory predicts characteristic Fano lineshapes and even complete destructive interference resulting in the full suppression of PDC, due to the formation of a bound pump state in the continuum. Generalizing further, we show that the framework can also be applied to higher-order parametric processes such as parametric three-photon generation, and we also find numerical signatures that Fano-type interactions occur even for multi-photon PDC under stronger pumping. Our results establish broadband PDC as yet another physical system natively exhibiting Fano-type interactions and advance a theoretical framework in which to understand the complicated quantum dynamics of strongly nonlinear broadband quantum optics.

quant-ph↗

arXiv2020

Optical parametric oscillation in silicon carbide nanophotonics

Silicon carbide (SiC) is rapidly emerging as a leading platform for the implementation of nonlinear and quantum photonics. Here, we find that commercial SiC, which hosts a variety of spin qubits, possesses low optical absorption that can enable SiC integrated photonics with quality factors exceeding $10^7$. We fabricate microring resonators with quality factors as high as 1.1 million, and observe low-threshold (8.5 $\pm$ 0.5 mW) optical parametric oscillation as well as optical microcombs spanning 200 nm. Our demonstration is an essential milestone in the development of photonic devices that harness the unique optical properties of SiC, paving the way toward the monolithic integration of nonlinear photonics with spin-based quantum technologies.

physics.optics↗