arXiv subjects

Martin Setvín

Publications and source records attributed to Martin Setvín.

7 recordsLinked to original sources

arXiv2024

How to cleave cubic perovskite oxides

Surfaces of cubic perovskite oxides attract significant attention for their physical tunability and high potential for technical applications. Bulk-terminated surfaces are desirable for theoretical modelling and experimental reproducibility, yet there is a lack of methods for preparing such well-defined surfaces. We discuss a method for strain-assisted cleaving of perovskite single crystals, using a setup easily transferable between different experimental systems. The details of the cleaving device and the procedure were optimized in a systematic study on the model SrTiO$_3$. The large-area morphology and typical distribution of surface terminations on cleaved SrTiO$_3$(001) is presented, with specific guidelines on how to distinguish well-cleaved surfaces from conchoidally fractured ones. The cleaving is applicable to other cubic perovskites, as demonstrated on KTaO$_3$(001) and BaTiO$_3$(001). This approach opens up a pathway for obtaining high-quality surfaces of this promising class of materials.

cond-mat.mtrl-sci↗

arXiv2024

Duality and degeneracy lifting in two-dimensional electron liquids on SrTiO$_3$(001)

Two-dimensional electron liquids (2DELs) have increasing technological relevance for ultrafast electronics and spintronics, yet significant gaps in their fundamental understanding are exemplified on the prototypical SrTiO$_3$. We correlate the exact SrTiO$_3$(001) surface structure with distinct 2DELs through combined microscopic angle-resolved photoemission spectroscopy and non-contact atomic force microscopy on truly bulk-terminated surfaces that alleviate structural uncertainties inherent to this long-studied system. The SrO termination is shown to develop a 2DEL following the creation of oxygen vacancies, unlike the intrinsically metallic TiO$_2$ termination. Differences in degeneracy of the 2DELs, that share the same band filling and identical band bending, are assigned to polar distortions of the Ti atoms in combination with spin order, supported with the extraction of fundamental electron-phonon coupling strength. These results not only resolve the ambiguities regarding 2DELs on SrTiO$_3$ thus far, but also pave the way to manipulating band filling and spin order in oxide 2DELs in general.

cond-mat.mtrl-sci↗

arXiv2023

Interaction of surface cations of cleaved mica with water in vapor and liquid forms

Natural minerals contain ions that become hydrated when they come into contact with water in vapor and liquid forms. Muscovite mica -- a common phyllosilicate with perfect cleavage planes -- is an ideal system to investigate the details of ion hydration. The cleaved mica surface is decorated by an array of K$^+$ ions that can be easily exchanged with other ions or protons when immersed in an aqueous solution. Despite the vast interest in the atomic-scale hydration processes of these K$^+$ ions, experimental data under controlled conditions have remained elusive. Here, atomically resolved non-contact atomic force microscopy (nc-AFM) is combined with X-ray photoelectron spectroscopy (XPS) to investigate the cation hydration upon dosing water vapor at 100 K in ultra-high vacuum (UHV). The cleaved surface is further exposed to ultra-clean liquid water at room temperature, which promotes ion mobility and partial ion-to-proton substitution. The results offer the first direct experimental views of the interaction of water with muscovite mica in UHV. The findings are in line with previous theoretical predictions.

cond-mat.mtrl-sci↗

arXiv2023

Resolving the intrinsic short-range ordering of K$^+$ ions on cleaved muscovite mica

Muscovite mica, KAl$_2$(Si$_3$Al)O$_{10}$(OH)$_2$, is a common layered phyllosilicate with perfect cleavage planes. The atomically flat surfaces obtained through cleaving lend themselves to scanning probe techniques with atomic resolution and are ideal to model minerals and clays. Despite the importance of the cleaved mica surfaces, several questions remain unresolved. It is established that K$^+$ ions decorate the cleaved surface, but their intrinsic ordering -- unaffected by the interaction with the environment -- is not known. This work presents clear images of the K$^+$ distribution of cleaved mica obtained with low-temperature non-contact atomic force microscopy (AFM) under ultra-high vacuum (UHV) conditions. The data unveil the presence of short-range ordering, contrasting previous assumptions of random or fully ordered distributions. Density functional theory (DFT) calculations and Monte Carlo simulations show that the substitutional subsurface Al$^{3+}$ ions have an important role for the surface K$^+$ ion arrangement.

cond-mat.mtrl-sci↗

arXiv2023

The prototypical organic-oxide interface: intra-molecular resolution of sexiphenyl on In$_2$O$_3$(111)

The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This work focuses on the prototypical organic semiconductor para-sexiphenyl (6P) adsorbed on In$_2$O$_3$(111), the thermodynamically most stable surface of the material that the most common transparent conducting oxide, indium tin oxide (ITO) is based on. The onset of nucleation and formation of the first monolayer are followed with atomically-resolved scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Annealing to 200$^\circ$C provides sufficient thermal energy for the molecules to orient themselves along the high-symmetry directions of the surface, leading to a single adsorption site. The AFM data suggests a twisted adsorption geometry. With increasing coverage, the 6P molecules first form a loose network with poor long-range order. Eventually the molecules re-orient and form an ordered monolayer. This first monolayer has a densely packed, well-ordered (2$\times$1) structure with one 6P per In$_2$O$_3$(111) substrate unit cell, i.e., a molecular density of 5.64$\times$10$^{13}$ cm$^{-2}$.

cond-mat.mtrl-sci↗

arXiv2020

Does a pristine, unreconstructed SrTiO$_3$(001) surface exist?

The surfaces of perovskite oxides affect their functional properties, and while a bulk-truncated (1$\times$1) termination is generally assumed, its existence and stability is controversial. Here, such a surface is created by cleaving the prototypical SrTiO$_3$(001) in ultra-high vacuum, and its response to thermal annealing is observed. Atomically resolved nc-AFM shows that intrinsic point defects on the as-cleaved surface migrate at temperatures above 200\,$^\circ$C. At 400--500\,$^\circ$C, a disordered surface layer forms, albeit still with a (1$\times$1) pattern in LEED. Purely TiO$_2$-terminated surfaces, prepared by wet-chemical treatment, are also disordered despite their (1$\times$1) periodicity in LEED.

cond-mat.mtrl-sci↗

arXiv2008

Heterogeneous nucleation and adatom detachment at 1-D growth of Indium on Si(100)-2x1

Growth of atomic indium chains - 1D islands - on the Si(100)-2x1 surface was observed by scanning tunneling microscopy (STM) at room temperature and simulated by means of a kinetic Monte Carlo method. Density of indium islands and island size distribution were obtained for various deposition rates and coverage. STM observation of growth during deposition of indium provided information on growth kinetics and relaxation of grown layers. Important role of C-type defects at adsorption of metal atoms was observed. Measured growth characteristics were simulated using a microscopic model with anisotropic surface diffusion and forbidden zones along the metal chains. An analysis of experimental and simulation data shows that detachment of indium adatoms from the chains substantially influences a growth scenario and results in monotonously decreasing chain length distribution function at low coverage. Diffusion barriers determined from the simulations correspond to almost isotropic diffusion of indium adatoms on the surface. The results are discussed with respect to data reported in earlier papers for other metals.

cond-mat.mtrl-sci↗