arXiv subjects

Martin Steinhart

Publications and source records attributed to Martin Steinhart.

At least 19 recordsLinked to original sources

arXiv2024

Straight versus Spongy -- Effect of Tortuosity on Polymer Imbibition into Nanoporous Matrices Assessed by Segmentation-Free Analysis of 3D Sample Reconstructions

We comparatively analyzed imbibition of polystyrene (PS) into two complementary pore models having pore diameters of about 380 nm and hydroxyl-terminated inorganic-oxidic pore walls, controlled porous glass (CPG) and self-ordered porous alumina (AAO), by X-ray computed tomography and EDX spectroscopy. CPG contains continuous spongy-tortuous pore systems. AAO containing arrays of isolated straight cylindrical pores is a reference pore model with a tortuosity close to 1. Comparative evaluation of the spatiotemporal imbibition front evolution yields important information on the pore morphology of a probed tortuous matrix like CPG and on the imbibition mechanism. To this end, pixel brightness dispersions in tomographic 3D reconstructions and 2D EDX maps of infiltrated AAO and CPG samples were condensed into 1D brightness dispersion profiles normal to the membrane surfaces. Their statistical analysis yielded positions and widths of the imbibition fronts without segmentation or determination of pore positions. The retardation of the imbibition front movement with respect to AAO reference samples may be used as a descriptor for the tortuosity of a tested porous matrix. The velocity of the imbibition front movements in CPG equaled two-thirds of the velocity of the imbibition front movements in AAO. Moreover, the dynamics of the imbibition front broadening discloses whether porous matrices are dominated by cylindrical neck-like pore segments or by nodes. Independent single-meniscus movements in cylindrical AAO pores result in faster imbibition front broadening than in CPG, in which a morphology dominated by nodes results in slower cooperative imbibition front movements involving several menisci.

cond-mat.mtrl-sci↗

arXiv2024

Reactive additive capillary stamping with double network hydrogel-derived aerogel stamps under solvothermal conditions

Integration of solvothermal reaction products into complex thin-layer architectures is frequently achieved by combinations of layer transfer and subtractive lithography, whereas direct additive substrate patterning with solvothermal reaction products has remained challenging. We report reactive additive capillary stamping under solvothermal conditions as a parallel contact-lithographic access to patterns of solvothermal reaction products in thin-layer configurations. To this end, corresponding precursor inks are infiltrated into mechanically robust mesoporous aerogel stamps derived from double-network hydrogels (DNHGs). The stamp is then brought into contact with a substrate to be patterned under solvothermal reaction conditions inside an autoclave. The precursor ink forms liquid bridges between the topographic surface pattern of the stamp and the substrate. Evaporation-driven enrichment of the precursors in these liquid bridges along with their liquid-bridge-guided conversion into the solvothermal reaction products yields large-area submicron patterns of the solvothermal reaction products replicating the stamp topography. As example, we prepared thin hybrid films, which contained ordered monolayers of superparamagnetic submicron nickel ferrite dots prepared by solvothermal capillary stamping surrounded by nickel electrodeposited in a second, orthogonal substrate functionalization step. The submicron nickel ferrite dots acted as magnetic hardener halving the remanence of the ferromagnetic nickel layer. In this way, thin-layer electromechanical systems, transformers and positioning systems may be customized.

physics.app-ph↗

arXiv2024

Solvent-Free High-Temperature Capillary Stamping of Stimuli-Responsive Polymers: Wettability Management by Orthogonal Substrate Functionalization

The wettability of surfaces determines their antifouling, antifogging, anti-icing, and self-cleaning properties as well as their usability for sensing, oil-water separation, water collection, and water purification. Solvent-free high-temperature capillary stamping of stimuli-responsive polymers yielding arrays of stimuli-responsive polymer microdots on differently modified substrates enables the flexible generation of switchable surfaces with different water contact angles (WCAs). Potential problems associated with the deposition of polymer solutions, such as the handling of volatile organic solvents, phase separation induced by solvent evaporation, and capillarity-driven flow processes, are circumvented. We used composite stamps with topographically patterned contact surfaces consisting of metallic nickel cores and porous MnO2 coatings taking up the stimuli-responsive polymers. The short transport paths from the MnO2 contact layers to the counterpart substrates enabled the stamping of polymer melts containing components impeding flow, such as carbon nanotubes (CNTs). Thus-obtained arrays of polymer-CNT hybrid microdots prevent problems associated with continuous coatings including delamination and crack propagation. Moreover, the range within which the properties of the stamped stimuli-responsive polymer microdots are switchable can be tuned by orthogonal substrate modification. As an example, we stamped hybrid microdots consisting of poly(2-(methacryloyloxy)ethyl ferrocenecarboxylate) (PFcMA) and CNTs onto indium tin oxide (ITO) substrates. Coating the ITO substrates with a poly(ethylene oxide)-terminated silane shifted the WCAs obtained by switching the PFcMA between its oxidized and reduced states by nearly 50°.

cond-mat.soft↗

arXiv2023

Polymeric Liquids in Nanoporous Photonic Structures: From Precursor Film Spreading to Imbibition Dynamics at the Nanoscale

Polymers are known to wet nanopores with high surface energy through an atomically thin precursor film followed by slower capillary filling. We present here light interference spectroscopy using a nanoporous membrane-based chip that allows us to observe the dynamics of these phenomena in situ with sub-nanometer spatial and milli- to microsecond temporal resolution. The device consists of a mesoporous silicon film (average pore size 6 nm) with an integrated photonic crystal, which permits to simultaneously measure the phase shift of the thin-film interference and the resonance of the photonic crystal upon imbibition. For a styrene dimer, we find a flat fluid front without a precursor film, while the pentamer forms an expanding molecular thin film moving in front of the menisci of the capillary filling. These different behaviors are attributed to a significantly faster pore-surface diffusion compared to the imbibition dynamics for the pentamer and vice versa for the dimer. In addition, both oligomers exhibit anomalously slow imbibition dynamics, which could be explained by apparent viscosities of six and eleven times the bulk value, respectively. However, a more consistent description of the dynamics is achieved by a constriction model that emphasizes the increasing importance of local undulations in the pore radius with the molecular size and includes a sub-nanometer hydrodynamic dead, immobile zone at the pore wall, but otherwise uses bulk fluid parameters. Overall, our study illustrates that interferometric, opto-fluidic experiments with nanoporous media allow for a remarkably detailed exploration of the nano-rheology of polymeric liquids.

cond-mat.soft↗

arXiv2021

Statistical Analysis of Submicron X-Ray Tomography Data on Polymer Imbibition into Arrays of Cylindrical Nanopores

Frozen transient imbibition states in arrays of straight cylindrical pores 400 nm in diameter were imaged by phase-contrast X-ray computed tomography with single-pore resolution. A semi-automatic algorithm yielding brightness profiles along all pores identified within the probed sample volume is described. Imbibition front positions are determined by descriptive statistics. A first approach involves the evaluation of frequency densities of single-pore imbibition lengths, a second one the evaluation of the statistical brightness dispersion within the probed volume as a function of the distance from the pore mouths. We plotted average imbibition front positions against systematically varied powers of the imbibition time and determined the optimal exponent of the imbibition time by considering the correlation coefficients of the corresponding linear fits. Thus, slight deviations from the proportionality of the average imbibition front position to the square root of the imbibition time predicted by the Lucas-Washburn theory were found. A meaningful preexponential factor in the power law relating imbibition front position and imbibition time may only be determined after ambiguities regarding the exponent of the imbibition time are resolved. The dispersion of peaks representing the imbibition front in frequency densities of single-pore imbibition lengths and in brightness dispersion profiles plotted against the pore depth is suggested as measure of the imbibition front width. Phase-contrast X-ray computed tomography allows the evaluation of a large number of infiltrated submicron pores taking advantage of phase-contrast imaging; artifacts related to sample damage by tomography requiring physical ablation of sample material are avoided.

physics.chem-ph↗

arXiv2021

Phenolic Resin Dual-Use Stamps for Capillary Stamping and Decal Transfer Printing

We report an optimized two-step thermopolymerization process carried out in contact with micropatterned molds that yields porous phenolic resin dual-use stamps with topographically micropatterned contact surfaces. With these stamps, two different parallel additive substrate manufacturing methods can be executed: capillary stamping and decal transfer microlithography. Under moderate contact pressures, the porous phenolic resin stamps are used for non-destructive ink transfer to substrates by capillary stamping. Continuous ink supply through the pore systems to the contact surfaces of the porous phenolic resin stamps enables multiple successive stamp-substrate contacts for lithographic ink deposition under ambient conditions. No deterioration of the quality of the deposited pattern occurs and no interruptions for ink replenishment are required. Under high contact pressure, porous phenolic resin stamps are used for decal transfer printing. In this way, the tips of the stamps' contact elements are lithographically transferred to counterpart substrates. The granular nature of the phenolic resin facilitates the rupture of the contact elements upon stamp retraction. The deposited phenolic resin micropatterns characterized by abundance of exposed hydroxyl groups are used as generic anchoring sites for further application-specific functionalizations. As example, we deposited phenolic resin micropatterns on quartz crystal microbalance resonators and further functionalized them with polyethylenimine for preconcentration sensing of humidity and gaseous formic acid. We envision that also preconcentration coatings for other sensing methods, such as attenuated total reflection infrared spectroscopy and surface plasmon resonance spectroscopy, are accessible by this functionalization algorithm

cond-mat.mtrl-sci↗

arXiv2021

Porous block copolymer separation membranes for 21st century sanitation and hygiene

Removing hazardous particulate and macromolecular contaminants as well as viruses with sizes from a few nm up to the 100-nm-range from water and air is crucial for ensuring sufficient sanitation and hygiene for a growing world population. To this end, high-performance separation membranes are needed that combine high permeance, high selectivity and sufficient mechanical stability under operating conditions. However, design features of separation membranes enhancing permeance reduce selectivity and vice versa. Membrane configurations combining high permeance and high selectivity suffer in turn from a lack of mechanical robustness. These problems may be tackled by using block copolymers (BCPs) as a material platform for the design of separation membranes. BCPs are macromolecules that consist of two or more chemically distinct block segments, which undergo microphase separation yielding a wealth of ordered nanoscopic domain structures. Various methods allow the transformation of these nanoscopic domain structures into customized nanopore systems with pore sizes in the sub-100-nm range and with narrow pore size distributions. This tutorial review summarizes design strategies for nanoporous state-of-the-art BCP separation membranes, their preparation, their device integration and their use for water purification.

cond-mat.mtrl-sci↗

arXiv2021

Slippery Polymer Monoliths: Surface Functionalization with Ordered MoS2 Microparticle Arrays

Components of technical systems and devices often require self-lubricating properties, which are implemented by means of dry lubricants. However, continuous lubricant coatings on the components' surfaces often suffer from poor adhesion, delamination and crack propagation. The replacement of continuous coatings with dense ordered arrays of microparticles consisting of dry lubricants may overcome these drawbacks. Using the well-established solid lubricant MoS2 as model system, we demonstrate that the sliding capability of polymeric monoliths can be significantly enhanced by integration of arrays of micron-sized dry lubricant microparticles into their contact surfaces. To synthesize the MoS2 microparticle arrays, we first prepared ordered hexagonal arrays of ammonium tetrathiomolybdate (ATM) microparticles on Si wafers by molding against poly(dimethylsiloxane) templates followed by high-temperature conversion of the ATM microparticles into MoS2 microparticles under Ar/H2 atmosphere in the presence of elemental sulfur. Finally, the obtained large-scale hexagonal MoS2 microparticle arrays were transferred to the surfaces of polymer monoliths under conservation of the array ordering. Self-lubrication of components of technical systems by incorporation of dry lubricant microparticle arrays into their contact surfaces is an example for overcoming the drawbacks of continuous functional coatings by replacing them with microparticle arrays.

physics.app-ph↗

arXiv2021

Fast Evaporation Enabled Ultrathin Polymeric Coatings on Nanoporous Substrates for Highly Permeable Membranes

Membranes derived from ultrathin polymeric films are promising to meet fast separations, but currently available approaches to produce polymer films with greatly reduced thicknesses on porous supports still faces challenges. Here, defect-free ultrathin polymer covering films (UPCFs) are realized by a facile general approach of rapid solvent evaporation. By fast evaporating dilute polymer solutions, we realize ultrathin coating (~30 nm) of porous substrates exclusively on the top surface, forming UPCFs with a block copolymer of polystyrene-block-poly(2-vinyl pyridine) at room temperature or a homopolymer of poly(vinyl alcohol) (PVA) at elevated temperatures. With subsequent selective swelling to the block copolymer and crosslinking to PVA, the resulting bi-layered composite structures serve as highly permeable membranes delivering ~2-10 times higher permeability in ultrafiltration and pervaporation applications than state-of-the-art separation membranes with similar rejections and selectivities. This work opens up a new, facile avenue for the controllable fabrication of ultrathin coatings on porous substrates, which shows great potentials in membrane-based separations and other areas.

cond-mat.soft↗

arXiv2020

Capillary stamping of functional materials: parallel additive substrate patterning without ink depletion

Patterned substrates for optics, electronics, sensing, lab-on-chip technologies, bioanalytics, clinical diagnostics as well as translational and personalized medicine are typically prepared by additive substrate manufacturing including ballistic printing and microcontact printing. However, ballistic printing (e.g., ink jet and aerosol jet printing, laser-induced forward transfer) involves serial pixel-by-pixel ink deposition. Parallel additive pattering by microcontact printing is performed with solid elastomeric stamps suffering from ink depletion after a few stamp-substrate contacts. The throughput limitations of additive state-of-the-art patterning thus arising may be overcome by capillary stamping - parallel additive substrate patterning without ink depletion by mesoporous silica stamps, which enable ink supply through the mesopores anytime during stamping. Thus, either arrays of substrate-bound nanoparticles or colloidal nanodispersions of detached nanoparticles are accessible. We processed three types of model inks: 1) drug solutions, 2) solutions containing metallopolymers and block copolymers as well as 3) nanodiamond suspensions representing colloidal nanoparticle inks. Thus, we obtained aqueous colloidal nanodispersions of stamped drug nanoparticles, regularly arranged ceramic nanoparticles by post-stamping pyrolysis of stamped metallopolymeric precursor nanoparticles and regularly arranged nanodiamond nanoaggregates. Capillary stamping may overcome the throughput limitations of state-of-the-art additive substrate manufacturing while a broad range of different inks can be processed.

physics.app-ph↗

arXiv2020

Tailored pore gradient in phenolic membranes for adjustable permselectivity by leveraging different poloxamers

Cost-affordable phenolic membranes having gradient nanostructures can be facilely synthesized from resol oligomers in the presence of ZnCl2 and poloxamers. The gradient nanostructures are formed by stacking phenolic nanoparticles with gradually enlarged diameters as the distance from the upper surface increases. The use of poloxamers for creating gelation surroundings is of great significance for controlling the growth of phenolic nanoparticles, which in turn dictates the performance of the phenolic membranes thus-produced. Hence, a study of the effects of poloxamers species on the preparation of the phenolic membranes is highly demanded since such robust membranes have much potential to be scale up for mass production. Herein, the poloxamer Pluronic F127 (EO106-PO70-EO106; EO = ethyleneoxide, PO = propyleneoxide) was introduced in the membrane-forming formulations. As opposed to P123 (EO20-PO70-EO20) that we used previously, F127 possessing extended PEO chains can delay the gelation during membrane formation. Hence, the phenolic nucleates are able to grow for longer durations, leading to the generation of more distinct gradient nanostructures in the phenolic membranes. Enhanced permeance can then be realized with F127-derived phenolic membranes. We also demonstrate that L31 (EO1-PO22-EO1) with merely single terminal EO units at the ends of the PPO block could be used to prepare gradient phenolic membranes. This work is not only much helpful to deeply understand the design of the structural gradient in phenolic membranes, but capable of sheding light on the development of such intriguing structures for water purification.

physics.app-ph↗

arXiv2019

Immobilization of water drops on hydrophobic surfaces by contact line pinning at non-lithographically generated polymer microfiber rings

Water drops used as reaction compartments are commonly immobilized on hydrophilic areas bordered by hydrophobic areas. For many applications, such as the trapping of non-adherent cells, it is desirable to exploit the inertness and the anti-fouling behavior of hydrophobic surfaces as well as their repulsive behavior towards adsorbates in lab-on-chip configurations. However, the immobilization of water drops on hydrophobic surfaces has remained challenging. We report a nonlithographic approach to arrest water drops on hydrophobically modified macroporous silicon (mSi) with per uorinated surface. Contact line pinning at rings of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) fibers protruding from the mSi macropores immobilizes water drops when the hydrophobically modified mSi is moved or tilted and prevents dewetting within the PS-b-P2VP fiber rings. Without PS-b-P2VP fiber rings, water drops readily roll off. The PS-b-P2VP fiber rings were prepared by dropping PS-b-P2VP solution onto hydrophobically modified mSi. Selective swelling of the P2VP in the thus-formed circular PS-b-P2VP films with hot ethanol followed by detachment of the latter yielded hydrophobically modified mSi exhibiting annular areas, in which ruptured PS-b-P2VP fibers protruded from the mSi macropores. For example, PS-b-P2VP fiber rings with diameters of 6.5 mm and widths of about 0.2 mm immobilize water drops with a volume of 50 microliters.

physics.app-ph↗

arXiv2019

Evaluation of 3D gold nanodendrite layers obtained by templated galvanic displacement reactions for SERS sensing and heterogeneous catalysis

Dense layers of overlapping three-dimensional (3D) gold nanodendrites characterized by high specific surfaces as well as by abundance of sharp edges and vertices creating high densities of SERS hotspots are promising substrates for SERS-based sensing and catalysis. We have evaluated to what extent structural features of 3D gold nanodendrite layers can be optimized by the initiation of 3D gold nanodendrite growth at gold particles rationally positioned on silicon wafers. For this purpose, galvanic displacement reactions yielding 3D gold nanodendrites were guided by hexagonal arrays of parent gold particles with a lattice constant of 1.5 micrometers obtained by solid-state dewetting of gold on topographically patterned silicon wafers. Initiation of the growth of dendritic features at edges of the gold particles resulted in the formation of 3D gold nanodendrites while limitation of dendritic growth to the substrate plane was prevented. The regular arrangement of the parent gold particles supported the formation of dense layers of overlapping 3D gold nanodendrites that were sufficiently homogeneous within the resolution limits of Raman microscopes. Consequently, SERS mapping experiments revealed a reasonable degree of uniformity. The proposed preparation algorithm comprises only bottom-up process steps that can be carried out without use of costly instrumentation.

physics.app-ph↗

arXiv2018

Free-sustaining Three-dimensional S235 Steel-based Porous Electrocatalyst for Highly Efficient and Durable Oxygen Evolution

A novel oxygen evolution reaction (OER) catalyst (3D S235-P steel) based on steel S235 substrate has been successfully prepared via a facile one-step surface modification. The standard Carbon Manganese steel was phosphorizated superficially leading to the formation of a unique 3D interconnected nanoporous surface with high specific area which facilitates the electrocatalytically initiated oxygen evolution reaction. The prepared 3D S235-P steel exhibits enhanced electrocatalytic OER activities in alkaline regime confirmed by a low overpotential (η=326 mV at j=10 mA cm-2) and a small Tafel slope of 68.7 mV dec-1. Moreover, the catalyst was found to be stable under long-term usage conditions functioning as oxygen evolving electrode at pH 13 as evidenced by the sufficient charge to oxygen conversion rate (Faradaic efficiency: 82.11% and 88.34% at 10 mA cm-2 and 5 mA cm-2, respectively). In addition, it turned out that the chosen surface modification renders steel S235 into an OER electrocatalyst sufficiently and stable to work in neutral pH condition. Our investigation revealed that the high catalytic activities are likely to stem from the generated Fe/(Mn) hydroxide/oxo-hydroxides generated during the OER process. The phosphorization treatment is therefore not only an efficient way to optimize the electrocatalytic performance of standard Carbon-Manganese steel, but also enables for the development of low cost and abundant steels in the field of energy conversion.

physics.chem-ph↗

arXiv2018

Substrate patterning using regular macroporous block copolymer monoliths as sacrificial templates and as capillary microstamps

Polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) monoliths containing regular arrays of macropores (diameter ~1.1 microns, depth ~700 nm) at their surfaces are used to pattern substrates by patterning modes going beyond the functionality of classical solid elastomer stamps. In a first exemplary application, the macroporous PS-b-P2VP monoliths are employed as sacrificial templates for the deposition NaCl nanocrystals and topographically patterned iridium films. One NaCl nanocrystal per macropore is formed by evaporation of NaCl solutions filling the macropores followed by iridium coating. Thermal PS-b-P2VP decomposition yields topographically patterned iridium films consisting of ordered arrays of hexagonal cells, each of which contains one NaCl nanocrystal. For the second exemplary application, spongy-continuous mesopore systems are generated in the macroporous PS-b-P2VP monoliths by selective-swelling induced pore generation. Infiltrating the spongy-continuous mesopore systems with ink allows capillary microstamping of continuous ink films with holes at the positions of the macropores onto glass slides compatible with advanced light microscopy. Capillary microstamping can be performed multiple times under ambient conditions without re-inking and without quality deterioration of the stamped patterns. The macroporous PS-b-P2VP monoliths are prepared by double replication of primary macroporous silicon molds via secondary polydimethylsiloxane molds.

physics.app-ph↗

arXiv2018

Capillary nanostamping with spongy mesoporous silica stamps

Classical microcontact printing involves transfer of molecules adsorbed on the outer surfaces of solid stamps to substrates to be patterned. We prepared spongy mesoporous silica stamps that can be soaked with ink and that were topographically patterned with arrays of submicron contact elements. Multiple successive stamping steps can be carried out under ambient conditions without ink refilling. Lattices of fullerene nanoparticles with diameters in the 100 nm range were obtained by stamping C60/toluene solutions on perfluorinated glass slides partially wetted by toluene. Stamping an ethanolic 1-dodecanethiol solution onto gold-coated glass slides yielded arrays of submicron dots of adsorbed 1-dodecantethiol molecules, even though macroscopic ethanol drops spread on gold. This outcome may be related to the pressure drop across the concave ink menisci at the mesopore openings on the stamp surface counteracting the van der Waals forces between ink and gold surface and/or to reduced wettability of the 1-dodecanethiol dots themselves by ethanol. The chemical surface heterogeneity of gold-coated glass slides functionalized with submicron 1-dodecanethiol dots was evidenced by dewetting of molten polystyrene films eventually yielding ordered arrays of polystyrene nanoparticles

physics.app-ph↗

arXiv2018

Steel-Based Electrocatalysts for Efficient and Durable Oxygen Evolution in Acidic Media

High overpotentials, particularly an issue of common anode materials, hamper the process of water electrolysis for clean energy generation. Thanks to immense research efforts up to date oxygen evolution electrocatalysts based on earth-abundant elements work efficiently and stably in neutral and alkaline regimes. However, non-noble metal-based anode materials that can withstand low pH regimes are considered to be an indispensable prerequisite for the water splitting to succeed in the future. All oxygen evolving electrodes working durably and actively in acids contain Ir at least as an additive. Due to its scarcity and high acquisition costs noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a Ni containing stainless steel for use as an oxygen-forming electrode in diluted H2SO4. Unmodified Ni42 steel showed a significant weight loss after long term OER polarization experiments. Moreover, a substantial loss of the OER performance of the untreated steel specimen seen in linear sweep voltammetry measurements turned out to be a serious issue. However, upon anodization in LiOH, Ni42 alloy was rendered in OER electrocatalysts that exhibit under optimized synthesis conditions stable overpotentials down to 445 mV for 10 mA cm-2 current density at pH 0. Even more important: The resulting material has proven to be robust upon long-term usage (weight loss: 20 mug/mm2 after 50 ks of chronopotentiometry at pH 1) towards OER in H2SO4. Our results suggest that electrochemical oxidation of Ni42 steel in LiOH (sample Ni42Li205) results in the formation of a metal oxide containing outer zone that supports solution route-based oxygen evolution in acidic regime accompanied by a good stability of the catalyst.

physics.chem-ph↗

arXiv2018

Nanostructured submicron block copolymer dots by sacrificial stamping: a potential preconcentration platform for locally resolved sensing, chemistry and cellular interactions

Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto silicon wafers and glass slides. The sacrificial PS-b-P2VP stamps were topographically patterned with truncated-pyramidal contact elements and penetrated by spongy-continuous nanopore systems. The spongy nature of the sacrificial PS-b-P2VP stamps supported formation of adhesive contact to the counterpart surfaces and the rupture of the contact elements during stamp retraction. The submicron PS-b-P2VP dots generated by sacrificial stamping can be further functionalized, examples include loading submicron PS-b-P2VP dots with dyes and attachment of gold nanoparticles to their outer surfaces. The arrays of submicron PS-b-P2VP dots can be integrated into setups for advanced optical microscopy, total internal reflection fluorescence microscopy or Raman microscopy. Arrays of nanostructured submicron block copolymer dots may represent a preconcentration platform for locally resolved sensing and locally resolved monitoring of cellular interactions or might be used as microreactor arrays in lab-on-chip configurations.

physics.app-ph↗