arXiv subjects

Martin Weides

Publications and source records attributed to Martin Weides.

At least 19 recordsLinked to original sources

arXiv2026

Wireless millikelvin interconnects for superconducting quantum hardware

Scalable quantum computing is limited by the dense network of electrical interconnects linking cryogenic quantum processors to room-temperature control electronics. To overcome this bottleneck, considerable effort has focused on cryogenic CMOS electronics and microwave-to-optical transduction, aiming to reduce wiring complexity and thermal loading. Wireless interconnects have recently emerged as a promising complementary approach, yet their compatibility with superconducting quantum hardware remains largely unexplored. Here, we demonstrate the wireless excitation of a superconducting microwave resonator of the type routinely employed for qubit readout, operating at millikelvin temperatures inside a dilution refrigerator. By directly comparing wired and wireless operation within the same cryogenic environment, we show that wireless coupling preserves the intrinsic resonator response while revealing parasitic electromagnetic pathways arising from stray radiation within the cryostat enclosure. These results establish a framework for the co-design of wireless interconnects, cryogenic packaging and superconducting quantum hardware.

quant-ph↗

arXiv2026

Gap Engineered Superconducting Multilayer Nanobridge Josephson Junctions

We report the realization of multilayer three-dimensional nanobridge Josephson junctions based on Nb/NbN and Nb/TiN superconducting stacks fabricated using electron-beam lithography and chlorine-based dry etching. In this architecture, a high-resistivity nitride layer defines the geometrical weak link, while the top Nb layer sets the overall critical temperature and film quality of the stack. This multilayer design enables engineering of the superconducting gap and proximity effects without relying on focused ion beam milling or oxide tunnel barriers. The devices are successfully integrated into dc SQUIDs, demonstrating reliable circuit-level operation. By combining material selectivity with three-dimensional geometry, this platform provides a scalable route toward oxide-free Josephson junctions suitable for superconducting electronics.

cond-mat.supr-con↗

arXiv2025

Robust NbN on Si-SiGe hybrid superconducting-semiconducting microwave quantum circuit

Advancing large-scale quantum computing requires superconducting circuits that combine long coherence times with compatibility with semiconductor technology. We investigate niobium nitride (NbN) coplanar waveguide resonators integrated with Si/SiGe quantum wells, creating a hybrid platform designed for CMOS-compatible quantum hardware. Using temperature-dependent microwave spectroscopy in the single-photon regime, we examine resonance frequency and quality factor variations to probe the underlying loss mechanisms. Our analysis identifies the roles of two-level systems, quasiparticles, and scattering processes, and connects these losses to wafer properties and fabrication methods. The devices demonstrate reproducible performance and stable operation maintained for over two years, highlighting their robustness. These results provide design guidelines for developing low-loss, CMOS-compatible superconducting circuits and support progress toward resilient, scalable architectures for quantum information processing.

quant-ph↗

arXiv2025

On-chip microwave sensing of quasiparticles in tantalum superconducting circuits on silicon for scalable quantum technologies

The performance and scalability of superconducting quantum circuits are fundamentally constrained by non-equilibrium quasiparticles, which induce microwave losses that limit resonator quality factors and qubit coherence times. Understanding and mitigating these excitations is therefore central to advancing scalable quantum technologies. Here, we demonstrate on-chip microwave sensing of quasiparticles in high-Q {\alpha}-tantalum coplanar waveguide resonators on silicon, operated in the single-photon regime. Temperature-dependent measurements reveal persistent non-equilibrium quasiparticles at millikelvin temperatures, producing a measurable suppression of the internal quality factor (Qi) relative to theoretical expectations. By benchmarking across materials, we find that the quasiparticle density in {\alpha}-Ta is approximately one-third that of NbN at equivalent normalised temperatures (T/Tc), directly correlating with reduced microwave loss. Our methodology establishes a scalable platform for probing quasiparticle dynamics and points towards new routes for engineering superconducting circuits with improved coherence, with impact on qubit readout resonators, kinetic-inductance detectors, and emerging quantum processors and sensors.

quant-ph↗

arXiv2025

Quasiparticle Dynamics in NbN Superconducting Microwave Resonators at Single Photon Regime

Exchanging energy below the superconducting gap introduces quasiparticle energy distributions in superconducting quantum circuits, which will be responsible for their decoherence. This study examines the impact of quasiparticle energy on the performance of NbN superconducting microwave coplanar waveguide resonators on silicon chips. We measured the resonance frequency and internal quality factor in response to temperature sweeps to evaluate the effect of quasiparticle dynamics. Moreover, by calculating the complex conductivity of the NbN film, we identified the contribution of quasiparticle density to the experimental results.

quant-ph↗

arXiv2025

Classical Interfaces for Controlling Cryogenic Quantum Computing Technologies

Quantum processors have the potential to revolutionise computing on a scale unseen since the development of semiconductor technology in the middle of the 20th century. However, while there is now huge activity and investment in the field, there are a number of challenges that must be overcome before the technology can be fully realised. Of primary concern is the development of the classical technology required to interface with quantum systems, as we push towards a new era of high-performance, large-scale quantum computing. In this review, we briefly discuss some of the main challenges facing the development of universally useful quantum computers and the different architectures being investigated. We are primarily concerned with cryogenic quantum systems. These systems are among the most mature quantum computing architectures to date, and are garnering a lot of both industrial and academic attention. We present and analyse the leading methods of interfacing with quantum processors, both now and for the next generation of larger, multi-qubit systems. Recent advancements in control cryoelectronics, both semiconducting and superconducting, are covered, while a view towards newer methods such as optical and wireless qubit interfaces are also presented.

quant-ph↗

arXiv2024

Engineering high-Q superconducting tantalum microwave coplanar waveguide resonators for compact coherent quantum circuits

Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility with complementary metal-oxide-semiconductor (CMOS) technology, which is essential for quantum computing applications. Here, we demonstrate the fabrication engineering of thickness-dependent high quality factor (high-Q_i) Ta superconducting microwave coplanar waveguide resonators. All films are deposited on high-resistivity silicon substrates at room temperature without additional substrate heating. Before Ta deposition, a niobium (Nb) seed layer is used to ensure a body-centred cubic lattice ({\alpha}-Ta) formation. We further engineer the kinetic inductance (L_K) resonators by varying Ta film thicknesses. High L_K is a key advantage for applications because it facilitates the realisation of high-impedance, compact quantum circuits with enhanced coupling to qubits. The maximum internal quality factor Q_i of ~ 3.6 * 10^6 is achieved at the high power regime for 100 nm Ta, while the highest kinetic inductance is obtained to be 0.6 pH/sq for the thinnest film, which is 40 nm. This combination of high Q_i and high L_K highlights the potential of Ta microwave circuits for high-fidelity operations of compact quantum circuits.

quant-ph↗

arXiv2024

RSFQ All-Digital Programmable Multi-Tone Generator For Quantum Applications

One of the most important and topical challenges of quantum circuits is their scalability. Rapid Single Flux Quantum (RSFQ) technology is at the forefront of replacing current standard CMOS-based control architectures for a number of applications, including quantum computing and quantum sensor arrays. By condensing the control and readout to SFQ-based on-chip devices that are directly connected to the quantum systems, it is possible to minimise the total system overhead, improving scalability and integration. In this work, we present a novel RSFQ device that generates multi tone digital signals, based on complex pulse train sequences using a Circular Shift Register (CSR) and a comb filter stage. We show that the frequency spectrum of the pulse trains is dependent on a preloaded pattern on the CSR, as well as on the delay line of the comb filter stage. By carefully selecting both the pattern and delay, the desired tones can be isolated and amplified as required. Finally, we propose architectures where this device can be implemented to control and readout arrays of quantum devices, such as qubits and single photon detectors.

quant-ph↗

arXiv2024

Modelling Realistic Multi-layer devices for superconducting quantum electronic circuits

In this work, we present a numerical model specifically designed for 3D multilayer devices, with a focus on nanobridge junctions and coplanar waveguides. Unlike existing numerical models, ours does not approximate the physical layout or limit the number of constituent materials, providing a more accurate and flexible design tool. We calculate critical currents, current phase relationships, and the energy gap where relevant. We validate our model by comparing it with published data. Through our analysis, we found that using multilayer films significantly enhances control over these quantities. For nanobridge junctions in particular, multilayer structures improve qubit anharmonicity compared to monolayer junctions, offering a substantial advantage for qubit performance. For coated multilayer microwave circuits it allows for better studies of the proximity effect, including their effective kinetic inductance.

quant-ph↗

arXiv2023

Characterizing Niobium Nitride Superconducting Microwave Coplanar Waveguide Resonator Array for Circuit Quantum Electrodynamics in Extreme Conditions

The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays, with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (Qi) decreases from Qi ~ 1.07*10^6 in a high power regime (< nph > = 27000) to Qi ~ 1.36 *10^5 in single photon regime at temperature T = 100 mK. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature dependence internal quality factor and frequency tuning of the coplanar waveguide resonators to characterise the quasiparticle density of NbN. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure the resonators' resonance frequency and internal quality factor at single photon regime in response to in-plane magnetic fields B||. We verify that Qi stays well above 10^4 up to B|| = 240 mT in the photon number < nph > = 1.8 at T = 100 mK. Our results may pave the way for realising robust microwave superconducting circuits for circuit quantum electrodynamics (cQED) at high magnetic fields necessary for fault-tolerant quantum computing, and ultrasensitive quantum sensing.

quant-ph↗

arXiv2023

Circle fit optimization for resonator quality factor measurements: point redistribution for maximal accuracy

The control of material loss mechanisms is playing an increasingly important role for improving coherence times of superconducting quantum devices. Such material losses can be characterized through the measurement of planar superconducting resonators, which reflect losses through the resonance's quality factor $Q_l$. The resonance quality factor consists of both internal (material) losses as well as coupling losses when resonance photons escape back into the measurement circuit. The combined losses are then described as $Q_l^{-1} = \mathrm{Re}\{Q_c^{-1}\} + Q_i^{-1}$, where $Q_c$ and $Q_i$ reflect the coupling and internal quality factors of the resonator, respectively. To separate the relative contributions of $Q_i$ and $Q_c$ to $Q_l$, diameter-correcting circle fits use algebraic or geometric means to fit the resonance signal on the complex plane. However, such circle fits can produce varied results, so to address this issue, we use a combination of simulation and experiment to determine the reliability of a fitting algorithm across a wide range of quality factor values from $Q_i\ll Q_c$ to $Q_c\ll Q_i$. In addition, we develop a novel measurement protocol that can not only reduce fitting errors by factors $\gtrsim 2$ but also mitigates the influence of the measurement background on the fit results. This technique can be generalized for other resonance systems beyond superconducting resonators.

quant-ph↗

arXiv2022

Quantum emulation of the transient dynamics in the multistate Landau-Zener model

Quantum simulation is one of the most promising near term applications of quantum computing. Especially, systems with a large Hilbert space are hard to solve for classical computers and thus ideal targets for a simulation with quantum hardware. In this work, we study experimentally the transient dynamics in the multistate Landau-Zener model as a function of the Landau-Zener velocity. The underlying Hamiltonian is emulated by superconducting quantum circuit, where a tunable transmon qubit is coupled to a bosonic mode ensemble comprising four lumped element microwave resonators. We investigate the model for different initial states: Due to our circuit design, we are not limited to merely exciting the qubit, but can also pump the harmonic modes via a dedicated drive line. Here, the nature of the transient dynamics depends on the average photon number in the excited resonator. The greater effective coupling strength between qubit and higher Fock states results in a quasi-adiabatic transition, where coherent quantum oscillations are suppressed without the introduction of additional loss channels. Our experiments pave the way for more complex simulations with qubits coupled to an engineered bosonic mode spectrum.

quant-ph↗

arXiv2022

Quantum sensing with tunable superconducting qubits: optimization and speed-up

Sensing and metrology play an important role in fundamental science and applications by fulfilling the ever-present need for more precise data sets and by allowing researchers to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous. They are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timekeeping, spectroscopy, chemistry, magnetometry, healthcare, and medicine. Current progress in quantum technologies has inevitably triggered the exploration of the use of quantum systems as sensors with new and improved capabilities. This article describes the optimization of the quantum-enhanced sensing of external magnetic fluxes with a Kitaev phase estimation algorithm based on a sensor with tunable transmon qubits. It provides the optimal flux biasing point for sensors with different maximal qubit transition frequencies. An estimation of decoherence rates is made for a given design. The use of $2-$ and $3-$qubit entangled states for sensing are compared in simulation with the single qubit case. The flux sensing accuracy reaches $10^{-8}\cdot\Phi_0$ and scales with time as $\sim\ 1/t$ which proves the speed-up of sensing with high ultimate accuracy.

quant-ph↗

arXiv2021

Engineering the microwave to infrared noise photon flux for superconducting quantum systems

Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies -- beyond the pair-breaking energies -- cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.

quant-ph↗

arXiv2021

Frequency fluctuations of ferromagnetic resonances at milliKelvin temperatures

Unwanted fluctuations over time, in short, noise, are detrimental to device performance, especially for quantum coherent circuits. Recent efforts have demonstrated routes to utilizing magnon systems for quantum technologies, which are based on interfacing single magnons to superconducting qubits. However, the coupling of several components often introduces additional noise to the system, degrading its coherence. Researching the temporal behavior can help to identify the underlying noise sources, which is a vital step in increasing coherence times and the hybrid device performance. Yet, the frequency noise of the ferromagnetic resonance (FMR) has so far been unexplored. Here, we investigate such FMR frequency fluctuations of a YIG sphere down to mK-temperatures, and find them independent of temperature and drive power. This suggests that the measured frequency noise in YIG is dominated by so far undetermined noise sources, which properties are not consistent with the conventional model of two-level systems, despite their effect on the sample linewidth. Moreover, the functional form of the FMR frequency noise power spectral density (PSD) cannot be described by a simple power law. By employing time-series analysis, we find a closed function for the PSD that fits our observations. Our results underline the necessity of coherence improvements to magnon systems for useful applications in quantum magnonics.

cond-mat.mes-hall↗

arXiv2021

Strong magnon-photon coupling with chip-integrated YIG in the zero-temperature limit

The cross-integration of spin-wave and superconducting technologies is a promising method for creating novel hybrid devices for future information processing technologies to store, manipulate, or convert data in both classical and quantum regimes. Hybrid magnon-polariton systems have been widely studied using bulk Yttrium Iron Garnet (Y$_{3}$Fe$_{5}$O$_{12}$, YIG) and three-dimensional microwave photon cavities. However, limitations in YIG growth have thus far prevented its incorporation into CMOS compatible technology such as high quality factor superconducting quantum technology. To overcome this impediment, we have used Plasma Focused Ion Beam (PFIB) technology -- taking advantage of precision placement down to the micron-scale -- to integrate YIG with superconducting microwave devices. Ferromagnetic resonance has been measured at millikelvin temperatures on PFIB-processed YIG samples using planar microwave circuits. Furthermore, we demonstrate strong coupling between superconducting resonator and YIG ferromagnetic resonance modes by maintaining reasonably low loss while reducing the system down to the micron scale. This achievement of strong coupling on-chip is a crucial step toward fabrication of functional hybrid quantum devices that advantage from spin-wave and superconducting components.

cond-mat.mes-hall↗

arXiv2020

Coherent superconducting qubits from a subtractive junction fabrication process

Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss contributions from the superconducting film interfaces. In recent years, however, sub-micron scale overlap junctions have started to attract attention. Compared to shadow mask techniques, neither an angle dependent deposition nor free-standing bridges or overlaps are needed, which are significant limitations for wafer-scale processing. This comes at the cost of breaking the vacuum during fabrication, but simplifies integration in multi-layered circuits, implementation of vastly different junction sizes, and enables fabrication on a larger scale in an industrially-standardized process. In this work, we demonstrate the feasibility of a subtractive process for fabrication of overlap junctions. In an array of test contacts, we find low aging of the average normal state resistance of only 1.6\% over 6 months. We evaluate the coherence properties of the junctions by employing them in superconducting transmon qubits. In time domain experiments, we find that both, the qubit life- and coherence time of our best device, are on average greater than $20\,\si{\micro\second}$. Finally, we discuss potential improvements to our technique. This work paves the way towards a more standardized process flow with advanced materials and growth processes, and constitutes an important step for large scale fabrication of superconducting quantum circuits.

quant-ph↗

arXiv2019

State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform

We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the qubit into the ground state in a time much shorter than its energy relaxation time $T_1$. We show experimental results demonstrating reset of a fluxonium qubit with $99.4\,\%$ fidelity, using a readout-and-drive pulse sequence approximately $1.5 \, \mathrm{\mu s}$ long. Compared to passive ground state initialization through thermalization, with the time constant given by $T_1 = ~ 80 \, \mathrm{\mu s}$, the use of the FPGA-based platform allows us to improve both the fidelity and the time of the qubit initialization by an order of magnitude.

quant-ph↗