arXiv subjects

Martin Z. Bazant

Publications and source records attributed to Martin Z. Bazant.

At least 73 records · Page 4Linked to original sources

arXiv2020

Dielectric breakdown by electric-field induced phase separation

The control of the dielectric and conductive properties of device-level systems is important for increasing the efficiency of energy- and information-related technologies. In some cases, such as neuromorphic computing, it is desirable to increase the conductivity of an initially insulating medium by several orders of magnitude, resulting in effective dielectric breakdown. Here, we show that by tuning the value of the applied electric field in systems { with variable permittivity and electric conductivity}, e.g. ion intercalation materials, we can vary the device-level electrical conductivity by orders of magnitude. We attribute this behavior to the formation of filament-like conductive domains that percolate throughout the system, { which form only when the electric conductivity depends on the concentration}. We conclude by discussing the applicability of our results in neuromorphic computing devices and Li-ion batteries.

cond-mat.mes-hall↗

arXiv2020

Analysis, Design, and Generalization of Electrochemical Impedance Spectroscopy (EIS) Inversion Algorithms

We introduce a framework for analyzing and designing EIS inversion algorithms. Our framework stems from the observation of four features common to well-defined EIS inversion algorithms, namely (1) the representation of unknown distributions, (2) the minimization of a metric of error to estimate parameters arising from the chosen representation, subject to constraints on (3) the complexity control parameters, and (4) a means for choosing optimal control parameter values. These features must be present to overcome the ill-posed nature of EIS inversion problems. We review three established EIS inversion algorithms to illustrate the pervasiveness of these features, and show the utility of the framework by resolving ambiguities concerning three more algorithms. Our framework is then used to design the generalized EIS inversion (gEISi) algorithm, which uses Gaussian basis function representation, modality control parameter, and cross-validation for choosing the optimal control parameter value. The gEISi algorithm is applicable to the generalized EIS inversion problem, which allows for a wider range of underlying models. We also considered the construction of credible intervals for distributions arising from the algorithm. The algorithm is able to accurately reproduce distributions which have been difficult to obtain using existing algorithms. It is provided gratis on the repository https://github.com/suryaeff/gEISi.git.

physics.comp-ph↗

arXiv2020

Tuning the stability of Electrochemical Interfaces by Electron Transfer reactions

The morphology of interfaces is known to play fundamental role on the efficiency of energy-related applications, such light harvesting or ion intercalation. Altering the morphology on demand, however, is a very difficult task. Here, we show ways the morphology of interfaces can be tuned by driven electron transfer reactions. By using non-equilibrium thermodynamic stability theory, we uncover the operating conditions that alter the interfacial morphology. We apply the theory to ion intercalation and surface growth where electrochemical reactions are described using Butler-Volmer or coupled ion-electron transfer kinetics. The latter connects microscopic/quantum mechanical concepts with the morphology of electrochemical interfaces. Finally, we construct non-equilibrium phase diagrams in terms of the applied driving force (current/voltage) and discuss the importance of engineering the density of states of the electron donor in applications related to energy harvesting and storage, electrocatalysis and photocatalysis.

physics.chem-ph↗

arXiv2020

Vortices of Electro-osmotic Flow in Heterogeneous Porous Media

Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential) in the limit of thin double layers. Here, we show that the inherent heterogeneity of porous media generally leads to macroscopic vortex patterns, which have important implications for convective transport and mixing. These vortical flows originate due to competition between pressure-driven and electro-osmotic flows, and their size are characterized by the correlation length of heterogeneity in permeability or surface charge. The appearance of vortices is controlled by a single dimensionless control parameter, defined as the ratio of a typical electro-osmotic velocity to the total mean velocity.

physics.flu-dyn↗

arXiv2020

Theory of Ion Aggregation and Gelation in Super-Concentrated Electrolytes

In concentrated electrolytes with asymmetric or irregular ions, such as ionic liquids and solvent-in-salt electrolytes, ion association is more complicated than simple ion-pairing. Large branched aggregates can form at significant concentrations at even moderate salt concentrations. When the extent of ion association reaches a certain threshold, a percolating ionic gel networks can form spontaneously. Gelation is a phenomenon that is well known in polymer physics, but it is practically unstudied in concentrated electrolytes. However, despite this fact, the ion-pairing description is often applied to these systems for the sake of simplicity. In this work, drawing strongly from established theories in polymer physics, we develop a simple thermodynamic model of reversible ionic aggregation and gelation in concentrated electrolytes accounting for the competition between ion solvation and ion association. Our model predicts the populations of ionic clusters of different sizes as a function of salt concentration, it captures the onset of ionic gelation and also the post-gel partitioning of ions into the gel. We discuss the applicability of our model, as well as the implications of its predictions on thermodynamic, transport, and rheological properties.

physics.chem-ph↗

arXiv2020

Continuum theory of electrostatic correlations at charged surfaces

The standard model for diffuse charge phenomena in colloid science, electrokinetics and biology is the Poisson-Boltzmann mean-field theory, which breaks down for multivalent ions and large surface charge densities due to electrostatic correlations. In this paper, we formulate a predictive continuum theory of correlated electrolytes based on two extensions of the Bazant-Storey-Kornyshev (BSK) framework: (i) a physical boundary condition enforcing continuity of the Maxwell stress at a charged interface, which upholds the Contact Theorem for dilute primitive-model electrolytes, and (ii) scaling relationships for the correlation length, for a one-component plasma at a charged plane and around a cylinder, as well as a dilute z:1 electrolyte screening a planar surface. In these cases, the theory accurately reproduces Monte Carlo simulation results from weak to strong coupling, and extensions are possible for more complex models of electrolytes and ionic liquids.

cond-mat.soft↗

arXiv2019

Freezing point depression and freeze-thaw damage by nano-fuidic salt trapping

A remarkable variety of organisms and wet materials are able to endure temperatures far below the freezing point of bulk water. Cryo-tolerance in biology is usually attributed to "anti-freeze" proteins, and yet massive supercooling ($< -40^\circ$C) is also possible in porous media containing only simple aqueous electrolytes. For concrete pavements, the common wisdom is that freeze-thaw damage results from the expansion of water upon freezing, but this cannot explain the large pressures ($> 10$~MPa) required to damage concrete, the observed correlation between pavement damage and de-icing salts, or the damage of cement paste loaded with benzene (which contracts upon freezing). In this Letter, we propose a different mechanism -- nanofluidic salt trapping -- which can explain the observations, using simple mathematical models of dissolved ions confined to thin liquid films between growing ice and charged surfaces. Although trapped salt lowers the freezing point, ice nucleation in charged pores causes enormous disjoining pressures via the rejected ions, until their removal by precipitation or surface adsorption at a lower temperatures releases the pressure and allows complete freezing. The theory is able to predict the non-monotonic salt-concentration dependence of freeze-thaw damage in concreter and provides a general framework to understand the origins of cryo-tolerance.

cond-mat.soft↗

arXiv2019

Physics of Electrostatic Projection Revealed by High-Speed Video Imaging

Processes based on electrostatic projection are used extensively in industry, e.g. for mineral separations, electrophotography or manufacturing of coated abrasives, such as sandpaper. Despite decades of engineering practice, there are still unanswered questions. In this paper, we present a comprehensive experimental study of projection process of more than 1500 individual spherical alumina particles with a nominal size of 500 $μ$m, captured by high-speed video imaging and digital image analysis. Based on flight trajectories of approximately 1100 projected particles, we determined the acquired charge and dynamics as a function of relative humidity (RH) and electric field intensity and compared the results with classical theories. For RH levels of 50\% and above, more than 85\% of disposed particles were projected, even when the electric field intensity was at its minimum level. This suggests that, beyond a critical value of electric field intensity, relative humidity plays a more critical role in the projection process. We also observed that the charging time is reduced dramatically for RH levels of 50\% and above, possibly due to the build-up of thin water films around the particles which can facilitate charge transfer. In contrast, projected particles at 30\% RH level exhibited an excessive amount of electric charge, between two to four times than that of saturation value, which might be attributed to triboelectric charging effects. Finally, the physics of electrostatic projection is compared and contrasted with those of induced-charge electrokinetic phenomena, which share similar field-square scaling, as the applied field acts on its own induced charge to cause particle motion.

cond-mat.soft↗

arXiv2019

Theory of Freezing Point Depression in Charged Porous Media

Freezing in charged porous media can induce significant pressure and cause damage to tissues and functional materials. We formulate a thermodynamically consistent theory to model freezing phenomena inside charged heterogeneous porous space. Two regimes are distinguished: free ions in open pore space lead to negligible effects of freezing point depression and pressure. On the other hand, if nano-fluidic salt trapping happens, subsequent ice formation is suppressed due to the high concentration of ions in the electrolyte. In this case, our theory predicts that freezing starts at a significantly lower temperature compared to pure water. In 1D, as the temperature goes even lower, ice continuously grows, until the salt concentration reaches saturation, all ions precipitate to form salt crystals, and freezing completes. Enormous pressure can be generated if initial salt concentration is high before salt entrapment. We show modifications to the classical nucleation theory, due to the trapped salt ions. Interestingly, although the freezing process is enormously changed by trapped salts, our analysis shows that the Gibbs-Thompson equation on confined melting point shift is not affected by the presence of the electrolyte.

cond-mat.soft↗

arXiv2019

The Heat of Nervous Conduction: A Thermodynamic Framework

Early recordings of nervous conduction revealed a notable thermal signature associated with the electrical signal. The observed production and subsequent absorption of heat arise from physicochemical processes that occur at the cell membrane level during the conduction of the action potential. In particular, the reversible release of electrical energy stored as a difference of potential across the cell membrane appears as a simple yet consistent explanation for the heat production, as proposed in the "Condenser Theory." However, the Condenser Theory has not been analyzed beyond the analogy between the cell membrane and a parallel-plate capacitor, i.e. a condenser, which cannot account for the magnitude of the heat signature. In this work, we use a detailed electrostatic model of the cell membrane to revisit the Condenser Theory. We derive expressions for free energy and entropy changes associated with the depolarization of the membrane by the action potential, which give a direct measure of the heat produced and absorbed by neurons. We show how the density of surface charges on both sides of the membrane impacts the energy changes. Finally, considering a typical action potential, we show that if the membrane holds a bias of surface charges, such that the internal side of the membrane is 0.05 C m$^{-2}$ more negative than the external side, the size of the heat predicted by the model reaches the range of experimental values. Based on our study, we identify the change in electrical energy of the membrane as the primary mechanism of heat production and absorption by neurons during nervous conduction.

physics.bio-ph↗

arXiv2019

Electrochemical impedance of electrodiffusion in charged medium under $dc$ bias

An immobile charged species provides a charged medium for transport of charge carriers that is exploited in many applications, such as permselective membranes, doped semiconductors, biological ion channels, as well as porous media and microchannels with surface charges. In this paper, we theoretically study the electrochemical impedance of electrodiffusion in a charged medium by employing the Nernst-Planck equation and the electroneutrality condition with a background charge density. The impedance response is obtained under different dc bias conditions, extending above the diffusion-limiting bias. We find a transition in the impedance behavior around the diffusion-limiting bias, and present an analytical approximation for a weakly charged medium under an overlimiting bias.

physics.chem-ph↗

arXiv2019

Linear stability analysis of transient electrodeposition in charged porous media: suppression of dendritic growth by surface conduction

We study the linear stability of transient electrodeposition in a charged random porous medium, whose pore surface charges can be of any sign, flanked by a pair of planar metal electrodes. Discretization of the linear stability problem results in a generalized eigenvalue problem for the dispersion relation that is solved numerically, which agrees well with the analytical approximation obtained from a boundary layer analysis valid at high wavenumbers. Under galvanostatic conditions in which an overlimiting current is applied, in the classical case of zero surface charges, the electric field at the cathode diverges at Sand's time due to electrolyte depletion. The same phenomenon happens for positive charges but earlier than Sand's time. However, negative charges allow the system to sustain an overlimiting current via surface conduction past Sand's time, keeping the electric field bounded. Therefore, at Sand's time, negative charges greatly reduce surface instabilities and suppress dendritic growth, while zero and positive charges magnify them. We compare theoretical predictions for overall surface stabilization with published experimental data for copper electrodeposition in cellulose nitrate membranes and demonstrate good agreement between theory and experiment. We also apply the stability analysis to how crystal grain size varies with duty cycle during pulse electroplating.

physics.chem-ph↗

arXiv2019

Deionization Shock Driven by Electroconvection in a Circular Channel

In a circular channel passing over-limiting current (faster than diffusion), transient vortices of bulk electroconvection are observed in salt-depleted region within the horizontal plane. The spatiotemporal evolution of the salt concentration is directly visualized, revealing the propagation of a deionization shock wave driven by bulk electroconvection up to millimeter scales. This novel mechanism leads to quantitatively similar dynamics as for deionization shocks in charged porous media, which are driven instead by surface conduction and electro-osmotic flow at micron to nanometer scales. The remarkable generality of deionization shocks under over-limiting current could be used to manipulate ion transport in complex geometries for desalination and water treatment.

physics.flu-dyn↗

arXiv2019

Ionic activity in concentrated electrolytes: solvent structure effect revisited

We revisit the role of the local solvent structure on the activity coefficient of electrolytes with a general non-local dielectric function approach. We treat the concentrated electrolyte as a dielectric medium and suggest an interpolated formula for the dielectric response. The pure water limit is calibrated based on MD simulations and experimental data. Solving our model around a central ion, we find strong over-screening and oscillations in the potential, which are absent in the standard "primitive model" predictions. We obtain mathematically tractable closed-form expressions for the activity coefficients and show reasonable agreement with experimental data.

physics.chem-ph↗

arXiv2019

Multiscale Poromechanics of Wet Cement Paste

Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidities is obtained using a lattice gas density functional method together with a realistic nano-granular model of cement hydrates. The calculated adsorption/desorption isotherms and pore size distributions are discussed and compare well to nitrogen and water experiments. The standard method for pore size distribution determination from desorption data is evaluated. Then, the integration of the Korteweg liquid stress field around each cement hydrate particle provided the capillary forces at the nanoscale. The cement mesoscale structure was relaxed under the action of the capillary forces. Local irreversible deformations of the cement nano-grains assembly were identified due to liquid-solid interactions. The spatial correlations of the nonaffine displacements extend to a few tens of nm. Finally, the Love-Weber method provided the homogenized liquid stress at the micronscale. The homogenization length coincided with the spatial correlation length nonaffine displacements. Our results on the solid response to capillary stress field suggest that the micronscale texture is not affected by mild drying, while local irreversible deformations still occur. These results pave the way towards understanding capillary phenomena induced stresses in heterogeneous porous media ranging from construction materials, hydrogels to living systems.

cond-mat.soft↗

arXiv2019

Population dynamics of driven autocatalytic reactive mixtures

Motivated by the theory of reaction kinetics based on nonequilibrium thermodynamics and the linear stability of driven reaction-diffusion, we apply the Fokker-Planck equation to describe the population dynamics of an ensemble of reactive particles in contact with a chemical reservoir. We illustrate the effect of autocatalysis on the population dynamics by comparing systems with identical thermodynamics yet different reaction kinetics. The dynamic phase behavior of the system may be entirely different from what its thermodynamics may suggest. By defining phase separation for a particle ensemble to be when the probability distribution is bimodal, we find that thermodynamic phase separation may be suppressed by autoinhibitory reactions, while autocatalysis enhances phase separation and in some cases induce the ensemble that consists of thermodynamically single-phase systems to segregate into two distinct populations, which we term fictitious phase separation. Asymmetric reaction kinetics also results in qualitatively different population dynamics upon reversing the reaction direction. In the limit of negligible fluctuations, we use method of characteristics and linearization to study the evolution of the standard deviation of concentration as well as the condition for phase separation, in good agreement with the full numerical solution. Applications are discussed to Li-ion batteries and {\it in situ} x-ray diffraction.

physics.chem-ph↗

arXiv2019

Electrochemical kinetics of SEI growth on carbon black, I: Experiments

Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current direction during galvanostatic cycling of carbon black/Li half cells. We find that SEI growth strongly depends on all three parameters; most notably, we find SEI growth rates increase with nominal C rate and are significantly higher on lithiation than on delithiation. We observe this directional effect in both galvanostatic and potentiostatic experiments and discuss hypotheses that could explain this observation. This work identifies a strong coupling between SEI growth and charge storage (e.g., intercalation and capacitance) in carbon negative electrodes.

cond-mat.mtrl-sci↗

arXiv2019

Impact of Network Heterogenity on Nonlinear Electrokinetic Transport in Porous Media

We present a numerical study of nonlinear electrokinetic transport in porous media, focusing on the role of heterogeneity in a porous microstructure on ion concentration polarization and over-limiting current. For simplicity, the porous medium is modeled as a network of long, thin charged cylindrical pores, each governed by one-dimensional effective transport equations. For weak surface conduction, when sufficiently large potential is applied, we demonstrate that electrokinetic transport in a porous network can be dominated by electroconvection via internally induced flow loops, which is not properly captured by existing homogenized models. We systematically vary the topology and "accessivity" of the pore network and compare with simulations of traditional homogenized parallel-pore (capillary-bundle) models, in order to reveal the effects of regular and hierarchical connectivity. Our computational framework sheds light on the complex physics of nonlinear electrokinetic phenomena in microstructures and may be used to design porous media for applications, such as water desalination and purification by shock electrodialysis.

physics.flu-dyn↗