arXiv subjects

Marvin Künnemann

Publications and source records attributed to Marvin Künnemann.

At least 37 records · Page 2Linked to original sources

arXiv2022

Dynamic Time Warping Under Translation: Approximation Guided by Space-Filling Curves

The Dynamic Time Warping (DTW) distance is a popular measure of similarity for a variety of sequence data. For comparing polygonal curves $π, σ$ in $\mathbb{R}^d$, it provides a robust, outlier-insensitive alternative to the Fréchet distance. However, like the Fréchet distance, the DTW distance is not invariant under translations. Can we efficiently optimize the DTW distance of $π$ and $σ$ under arbitrary translations, to compare the curves' shape irrespective of their absolute location? There are surprisingly few works in this direction, which may be due to its computational intricacy: For the Euclidean norm, this problem contains as a special case the geometric median problem, which provably admits no exact algebraic algorithm (that is, no algorithm using only addition, multiplication, and $k$-th roots). We thus investigate exact algorithms for non-Euclidean norms as well as approximation algorithms for the Euclidean norm: - For the $L_1$ norm in $\mathbb{R}^d$, we provide an $\mathcal{O}(n^{2(d+1)})$-time algorithm, i.e., an exact polynomial-time algorithm for constant $d$. Here and below, $n$ bounds the curves' complexities. - For the Euclidean norm in $\mathbb{R}^2$, we show that a simple problem-specific insight leads to a $(1+\varepsilon)$-approximation in time $\mathcal{O}(n^3/\varepsilon^2)$. We then show how to obtain a subcubic $\widetilde{\mathcal{O}}(n^{2.5}/\varepsilon^2)$ time algorithm with significant new ideas; this time comes close to the well-known quadratic time barrier for computing DTW for fixed translations. Technically, the algorithm is obtained by speeding up repeated DTW distance estimations using a dynamic data structure for maintaining shortest paths in weighted planar digraphs. Crucially, we show how to traverse a candidate set of translations using space-filling curves in a way that incurs only few updates to the data structure.

cs.CG↗

arXiv2022

Towards Sub-Quadratic Diameter Computation in Geometric Intersection Graphs

We initiate the study of diameter computation in geometric intersection graphs from the fine-grained complexity perspective. A geometric intersection graph is a graph whose vertices correspond to some shapes in $d$-dimensional Euclidean space, such as balls, segments, or hypercubes, and whose edges correspond to pairs of intersecting shapes. The diameter of a graph is the largest distance realized by a pair of vertices in the graph. Computing the diameter in near-quadratic time is possible in several classes of intersection graphs [Chan and Skrepetos 2019], but it is not at all clear if these algorithms are optimal, especially since in the related class of planar graphs the diameter can be computed in $\widetilde{\mathcal{O}}(n^{5/3})$ time [Cabello 2019, Gawrychowski et al. 2021]. In this work we (conditionally) rule out sub-quadratic algorithms in several classes of intersection graphs, i.e., algorithms of running time $\mathcal{O}(n^{2-δ})$ for some $δ>0$. In particular, there are no sub-quadratic algorithms already for fat objects in small dimensions: unit balls in $\mathbb{R}^3$ or congruent equilateral triangles in $\mathbb{R}^2$. For unit segments and congruent equilateral triangles, we can even rule out strong sub-quadratic approximations already in $\mathbb{R}^2$. It seems that the hardness of approximation may also depend on dimensionality: for axis-parallel unit hypercubes in~$\mathbb{R}^{12}$, distinguishing between diameter 2 and 3 needs quadratic time (ruling out $(3/2-\varepsilon)$- approximations), whereas for axis-parallel unit squares, we give an algorithm that distinguishes between diameter $2$ and $3$ in near-linear time. Note that many of our lower bounds match the best known algorithms up to sub-polynomial factors.

cs.CG↗

arXiv2021

Polygon Placement Revisited: (Degree of Freedom + 1)-SUM Hardness and an Improvement via Offline Dynamic Rectangle Union

We revisit the classical problem of determining the largest copy of a simple polygon $P$ that can be placed into a simple polygon $Q$. Despite significant effort, known algorithms require high polynomial running times. (Barequet and Har-Peled, 2001) give a lower bound of $n^{2-o(1)}$ under the 3SUM conjecture when $P$ and $Q$ are (convex) polygons with $Θ(n)$ vertices each. This leaves open whether we can establish (1) hardness beyond quadratic time and (2) any superlinear bound for constant-sized $P$ or $Q$. In this paper, we affirmatively answer these questions under the $k$SUM conjecture, proving natural hardness results that increase with each degree of freedom (scaling, $x$-translation, $y$-translation, rotation): (1) Finding the largest copy of $P$ that can be $x$-translated into $Q$ requires time $n^{2-o(1)}$ under the 3SUM conjecture. (2) Finding the largest copy of $P$ that can be arbitrarily translated into $Q$ requires time $n^{2-o(1)}$ under the 4SUM conjecture. (3) The above lower bounds are almost tight when one of the polygons is of constant size: we obtain an $\tilde O((pq)^{2.5})$-time algorithm for orthogonal polygons $P,Q$ with $p$ and $q$ vertices, respectively. (4) Finding the largest copy of $P$ that can be arbitrarily rotated and translated into $Q$ requires time $n^{3-o(1)}$ under the 5SUM conjecture. We are not aware of any other such natural $($degree of freedom $+ 1)$-SUM hardness for a geometric optimization problem.

cs.CG↗

arXiv2021

Fréchet Distance Under Translation: Conditional Hardness and an Algorithm via Offline Dynamic Grid Reachability

The discrete Fréchet distance is a popular measure for comparing polygonal curves. An important variant is the discrete Fréchet distance under translation, which enables detection of similar movement patterns in different spatial domains. For polygonal curves of length $n$ in the plane, the fastest known algorithm runs in time $\tilde{\cal O}(n^{5})$ [Ben Avraham, Kaplan, Sharir '15]. This is achieved by constructing an arrangement of disks of size ${\cal O}(n^{4})$, and then traversing its faces while updating reachability in a directed grid graph of size $N := {\cal O}(n^2)$, which can be done in time $\tilde{\cal O}(\sqrt{N})$ per update [Diks, Sankowski '07]. The contribution of this paper is two-fold. First, although it is an open problem to solve dynamic reachability in directed grid graphs faster than $\tilde{\cal O}(\sqrt{N})$, we improve this part of the algorithm: We observe that an offline variant of dynamic $s$-$t$-reachability in directed grid graphs suffices, and we solve this variant in amortized time $\tilde{\cal O}(N^{1/3})$ per update, resulting in an improved running time of $\tilde{\cal O}(n^{4.66...})$ for the discrete Fréchet distance under translation. Second, we provide evidence that constructing the arrangement of size ${\cal O}(n^{4})$ is necessary in the worst case, by proving a conditional lower bound of $n^{4 - o(1)}$ on the running time for the discrete Fréchet distance under translation, assuming the Strong Exponential Time Hypothesis.

cs.DS↗

arXiv2021

Fine-Grained Completeness for Optimization in P

We initiate the study of fine-grained completeness theorems for exact and approximate optimization in the polynomial-time regime. Inspired by the first completeness results for decision problems in P (Gao, Impagliazzo, Kolokolova, Williams, TALG 2019) as well as the classic class MaxSNP and MaxSNP-completeness for NP optimization problems (Papadimitriou, Yannakakis, JCSS 1991), we define polynomial-time analogues MaxSP and MinSP, which contain a number of natural optimization problems in P, including Maximum Inner Product, general forms of nearest neighbor search and optimization variants of the $k$-XOR problem. Specifically, we define MaxSP as the class of problems definable as $\max_{x_1,\dots,x_k} \#\{ (y_1,\dots,y_\ell) : ϕ(x_1,\dots,x_k, y_1,\dots,y_\ell) \}$, where $ϕ$ is a quantifier-free first-order property over a given relational structure (with MinSP defined analogously). On $m$-sized structures, we can solve each such problem in time $O(m^{k+\ell-1})$. Our results are: - We determine (a sparse variant of) the Maximum/Minimum Inner Product problem as complete under *deterministic* fine-grained reductions: A strongly subquadratic algorithm for Maximum/Minimum Inner Product would beat the baseline running time of $O(m^{k+\ell-1})$ for *all* problems in MaxSP/MinSP by a polynomial factor. - This completeness transfers to approximation: Maximum/Minimum Inner Product is also complete in the sense that a strongly subquadratic $c$-approximation would give a $(c+\varepsilon)$-approximation for all MaxSP/MinSP problems in time $O(m^{k+\ell-1-δ})$, where $\varepsilon > 0$ can be chosen arbitrarily small. Combining our completeness with~(Chen, Williams, SODA 2019), we obtain the perhaps surprising consequence that refuting the OV Hypothesis is *equivalent* to giving a $O(1)$-approximation for all MinSP problems in faster-than-$O(m^{k+\ell-1})$ time.

cs.DS↗

arXiv2020

Impossibility Results for Grammar-Compressed Linear Algebra

To handle vast amounts of data, it is natural and popular to compress vectors and matrices. When we compress a vector from size $N$ down to size $n \ll N$, it certainly makes it easier to store and transmit efficiently, but does it also make it easier to process? In this paper we consider lossless compression schemes, and ask if we can run our computations on the compressed data as efficiently as if the original data was that small. That is, if an operation has time complexity $T(\rm{inputsize})$, can we perform it on the compressed representation in time $T(n)$ rather than $T(N)$? We consider the most basic linear algebra operations: inner product, matrix-vector multiplication, and matrix multiplication. In particular, given two compressed vectors, can we compute their inner product in time $O(n)$? Or perhaps we must decompress first and then multiply, spending $Ω(N)$ time? The answer depends on the compression scheme. While for simple ones such as Run-Length-Encoding (RLE) the inner product can be done in $O(n)$ time, we prove that this is impossible for compressions from a richer class: essentially $n^2$ or even larger runtimes are needed in the worst case (under complexity assumptions). This is the class of grammar-compressions containing most popular methods such as the Lempel-Ziv family. These schemes are more compressing than the simple RLE, but alas, we prove that performing computations on them is much harder.

cs.CC↗

arXiv2020

When Lipschitz Walks Your Dog: Algorithm Engineering of the Discrete Fréchet Distance under Translation

Consider the natural question of how to measure the similarity of curves in the plane by a quantity that is invariant under translations of the curves. Such a measure is justified whenever we aim to quantify the similarity of the curves' shapes rather than their positioning in the plane, e.g., to compare the similarity of handwritten characters. Perhaps the most natural such notion is the (discrete) Fréchet distance under translation. Unfortunately, the algorithmic literature on this problem yields a very pessimistic view: On polygonal curves with $n$ vertices, the fastest algorithm runs in time $O(n^{4.667})$ and cannot be improved below $n^{4-o(1)}$ unless the Strong Exponential Time Hypothesis fails. Can we still obtain an implementation that is efficient on realistic datasets? Spurred by the surprising performance of recent implementations for the Fréchet distance, we perform algorithm engineering for the Fréchet distance under translation. Our solution combines fast, but inexact tools from continuous optimization (specifically, branch-and-bound algorithms for global Lipschitz optimization) with exact, but expensive algorithms from computational geometry (specifically, problem-specific algorithms based on an arrangement construction). We combine these two ingredients to obtain an exact decision algorithm for the Fréchet distance under translation. For the related task of computing the distance value up to a desired precision, we engineer and compare different methods. On a benchmark set involving handwritten characters and route trajectories, our implementation answers a typical query for either task in the range of a few milliseconds up to a second on standard desktop hardware. We believe that our implementation will enable the use of the Fréchet distance under translation in applications, whereas previous approaches would have been computationally infeasible.

cs.CG↗

arXiv2020

Finding Small Satisfying Assignments Faster Than Brute Force: A Fine-grained Perspective into Boolean Constraint Satisfaction

To study the question under which circumstances small solutions can be found faster than by exhaustive search (and by how much), we study the fine-grained complexity of Boolean constraint satisfaction with size constraint exactly $k$. More precisely, we aim to determine, for any finite constraint family, the optimal running time $f(k)n^{g(k)}$ required to find satisfying assignments that set precisely $k$ of the $n$ variables to $1$. Under central hardness assumptions on detecting cliques in graphs and 3-uniform hypergraphs, we give an almost tight characterization of $g(k)$ into four regimes: (1) Brute force is essentially best-possible, i.e., $g(k) = (1\pm o(1))k$, (2) the best algorithms are as fast as current $k$-clique algorithms, i.e., $g(k)=(ω/3\pm o(1))k$, (3) the exponent has sublinear dependence on $k$ with $g(k) \in [Ω(\sqrt[3]{k}), O(\sqrt{k})]$, or (4) the problem is fixed-parameter tractable, i.e., $g(k) = O(1)$. This yields a more fine-grained perspective than a previous FPT/W[1]-hardness dichotomy (Marx, Computational Complexity 2005). Our most interesting technical contribution is a $f(k)n^{4\sqrt{k}}$-time algorithm for SubsetSum with precedence constraints parameterized by the target $k$ -- particularly the approach, based on generalizing a bound on the Frobenius coin problem to a setting with precedence constraints, might be of independent interest.

cs.CC↗

arXiv2019

Approximating APSP without Scaling: Equivalence of Approximate Min-Plus and Exact Min-Max

Zwick's $(1+\varepsilon)$-approximation algorithm for the All Pairs Shortest Path (APSP) problem runs in time $\widetilde{O}(\frac{n^ω}{\varepsilon} \log{W})$, where $ω\le 2.373$ is the exponent of matrix multiplication and $W$ denotes the largest weight. This can be used to approximate several graph characteristics including the diameter, radius, median, minimum-weight triangle, and minimum-weight cycle in the same time bound. Since Zwick's algorithm uses the scaling technique, it has a factor $\log W$ in the running time. In this paper, we study whether APSP and related problems admit approximation schemes avoiding the scaling technique. That is, the number of arithmetic operations should be independent of $W$; this is called strongly polynomial. Our main results are as follows. - We design approximation schemes in strongly polynomial time $O(\frac{n^ω}{\varepsilon} \text{polylog}(\frac{n}{\varepsilon}))$ for APSP on undirected graphs as well as for the graph characteristics diameter, radius, median, minimum-weight triangle, and minimum-weight cycle on directed or undirected graphs. - For APSP on directed graphs we design an approximation scheme in strongly polynomial time $O(n^{\frac{ω+ 3}{2}} \varepsilon^{-1} \text{polylog}(\frac{n}{\varepsilon}))$. This is significantly faster than the best exact algorithm. - We explain why our approximation scheme for APSP on directed graphs has a worse exponent than $ω$: Any improvement over our exponent $\frac{ω+ 3}{2}$ would improve the best known algorithm for Min-Max Product In fact, we prove that approximating directed APSP and exactly computing the Min-Max Product are equivalent.

cs.DS↗

arXiv2019

Walking the Dog Fast in Practice: Algorithm Engineering of the Fréchet Distance

The Fréchet distance provides a natural and intuitive measure for the popular task of computing the similarity of two (polygonal) curves. While a simple algorithm computes it in near-quadratic time, a strongly subquadratic algorithm cannot exist unless the Strong Exponential Time Hypothesis fails. Still, fast practical implementations of the Fréchet distance, in particular for realistic input curves, are highly desirable. This has even lead to a designated competition, the ACM SIGSPATIAL GIS Cup 2017: Here, the challenge was to implement a near-neighbor data structure under the Fréchet distance. The bottleneck of the top three implementations turned out to be precisely the decision procedure for the Fréchet distance. In this work, we present a fast, certifying implementation for deciding the Fréchet distance, in order to (1) complement its pessimistic worst-case hardness by an empirical analysis on realistic input data and to (2) improve the state of the art for the GIS Cup challenge. We experimentally evaluate our implementation on a large benchmark consisting of several data sets (including handwritten characters and GPS trajectories). Compared to the winning implementation of the GIS Cup, we obtain running time improvements of up to more than two orders of magnitude for the decision procedure and of up to a factor of 30 for queries to the near-neighbor data structure.

cs.CG↗

arXiv2018

On Nondeterministic Derandomization of Freivalds' Algorithm: Consequences, Avenues and Algorithmic Progress

Motivated by studying the power of randomness, certifying algorithms and barriers for fine-grained reductions, we investigate the question whether the multiplication of two $n\times n$ matrices can be performed in near-optimal nondeterministic time $\tilde{O}(n^2)$. Since a classic algorithm due to Freivalds verifies correctness of matrix products probabilistically in time $O(n^2)$, our question is a relaxation of the open problem of derandomizing Freivalds' algorithm. We discuss consequences of a positive or negative resolution of this problem and provide potential avenues towards resolving it. Particularly, we show that sufficiently fast deterministic verifiers for 3SUM or univariate polynomial identity testing yield faster deterministic verifiers for matrix multiplication. Furthermore, we present the partial algorithmic progress that distinguishing whether an integer matrix product is correct or contains between 1 and $n$ erroneous entries can be performed in time $\tilde{O}(n^2)$ -- interestingly, the difficult case of deterministic matrix product verification is not a problem of "finding a needle in the haystack", but rather cancellation effects in the presence of many errors. Our main technical contribution is a deterministic algorithm that corrects an integer matrix product containing at most $t$ errors in time $\tilde{O}(\sqrt{t} n^2 + t^2)$. To obtain this result, we show how to compute an integer matrix product with at most $t$ nonzeroes in the same running time. This improves upon known deterministic output-sensitive integer matrix multiplication algorithms for $t = Ω(n^{2/3})$ nonzeroes, which is of independent interest.

cs.DS↗

arXiv2018

Fine-Grained Complexity of Analyzing Compressed Data: Quantifying Improvements over Decompress-And-Solve

Can we analyze data without decompressing it? As our data keeps growing, understanding the time complexity of problems on compressed inputs, rather than in convenient uncompressed forms, becomes more and more relevant. Suppose we are given a compression of size $n$ of data that originally has size $N$, and we want to solve a problem with time complexity $T(\cdot)$. The naive strategy of "decompress-and-solve" gives time $T(N)$, whereas "the gold standard" is time $T(n)$: to analyze the compression as efficiently as if the original data was small. We restrict our attention to data in the form of a string (text, files, genomes, etc.) and study the most ubiquitous tasks. While the challenge might seem to depend heavily on the specific compression scheme, most methods of practical relevance (Lempel-Ziv-family, dictionary methods, and others) can be unified under the elegant notion of Grammar Compressions. A vast literature, across many disciplines, established this as an influential notion for Algorithm design. We introduce a framework for proving (conditional) lower bounds in this field, allowing us to assess whether decompress-and-solve can be improved, and by how much. Our main results are: - The $O(nN\sqrt{\log{N/n}})$ bound for LCS and the $O(\min\{N \log N, nM\})$ bound for Pattern Matching with Wildcards are optimal up to $N^{o(1)}$ factors, under the Strong Exponential Time Hypothesis. (Here, $M$ denotes the uncompressed length of the compressed pattern.) - Decompress-and-solve is essentially optimal for Context-Free Grammar Parsing and RNA Folding, under the $k$-Clique conjecture. - We give an algorithm showing that decompress-and-solve is not optimal for Disjointness.

cs.CC↗

arXiv2018

Multivariate Fine-Grained Complexity of Longest Common Subsequence

We revisit the classic combinatorial pattern matching problem of finding a longest common subsequence (LCS). For strings $x$ and $y$ of length $n$, a textbook algorithm solves LCS in time $O(n^2)$, but although much effort has been spent, no $O(n^{2-\varepsilon})$-time algorithm is known. Recent work indeed shows that such an algorithm would refute the Strong Exponential Time Hypothesis (SETH) [Abboud, Backurs, Vassilevska Williams + Bringmann, Künnemann FOCS'15]. Despite the quadratic-time barrier, for over 40 years an enduring scientific interest continued to produce fast algorithms for LCS and its variations. Particular attention was put into identifying and exploiting input parameters that yield strongly subquadratic time algorithms for special cases of interest, e.g., differential file comparison. This line of research was successfully pursued until 1990, at which time significant improvements came to a halt. In this paper, using the lens of fine-grained complexity, our goal is to (1) justify the lack of further improvements and (2) determine whether some special cases of LCS admit faster algorithms than currently known. To this end, we provide a systematic study of the multivariate complexity of LCS, taking into account all parameters previously discussed in the literature: the input size $n:=\max\{|x|,|y|\}$, the length of the shorter string $m:=\min\{|x|,|y|\}$, the length $L$ of an LCS of $x$ and $y$, the numbers of deletions $δ:= m-L$ and $Δ:= n-L$, the alphabet size, as well as the numbers of matching pairs $M$ and dominant pairs $d$. For any class of instances defined by fixing each parameter individually to a polynomial in terms of the input size, we prove a SETH-based lower bound matching one of three known algorithms. Specifically, we determine the optimal running time for LCS under SETH as $(n+\min\{d, δΔ, δm\})^{1\pm o(1)}$. [...]

cs.CC↗

arXiv2017

Tight Conditional Lower Bounds for Longest Common Increasing Subsequence

We consider the canonical generalization of the well-studied Longest Increasing Subsequence problem to multiple sequences, called $k$-LCIS: Given $k$ integer sequences $X_1,\dots,X_k$ of length at most $n$, the task is to determine the length of the longest common subsequence of $X_1,\dots,X_k$ that is also strictly increasing. Especially for the case of $k=2$ (called LCIS for short), several algorithms have been proposed that require quadratic time in the worst case. Assuming the Strong Exponential Time Hypothesis (SETH), we prove a tight lower bound, specifically, that no algorithm solves LCIS in (strongly) subquadratic time. Interestingly, the proof makes no use of normalization tricks common to hardness proofs for similar problems such as LCS. We further strengthen this lower bound (1) to rule out $O((nL)^{1-\varepsilon})$ time algorithms for LCIS, where $L$ denotes the solution size, (2) to rule out $O(n^{k-\varepsilon})$ time algorithms for $k$-LCIS, and (3) to follow already from weaker variants of SETH. We obtain the same conditional lower bounds for the related Longest Common Weakly Increasing Subsequence problem.

cs.CC↗

arXiv2017

On the Fine-grained Complexity of One-Dimensional Dynamic Programming

In this paper, we investigate the complexity of one-dimensional dynamic programming, or more specifically, of the Least-Weight Subsequence (LWS) problem: Given a sequence of $n$ data items together with weights for every pair of the items, the task is to determine a subsequence $S$ minimizing the total weight of the pairs adjacent in $S$. A large number of natural problems can be formulated as LWS problems, yielding obvious $O(n^2)$-time solutions. In many interesting instances, the $O(n^2)$-many weights can be succinctly represented. Yet except for near-linear time algorithms for some specific special cases, little is known about when an LWS instantiation admits a subquadratic-time algorithm and when it does not. In particular, no lower bounds for LWS instantiations have been known before. In an attempt to remedy this situation, we provide a general approach to study the fine-grained complexity of succinct instantiations of the LWS problem. In particular, given an LWS instantiation we identify a highly parallel core problem that is subquadratically equivalent. This provides either an explanation for the apparent hardness of the problem or an avenue to find improved algorithms as the case may be. More specifically, we prove subquadratic equivalences between the following pairs (an LWS instantiation and the corresponding core problem) of problems: a low-rank version of LWS and minimum inner product, finding the longest chain of nested boxes and vector domination, and a coin change problem which is closely related to the knapsack problem and (min,+)-convolution. Using these equivalences and known SETH-hardness results for some of the core problems, we deduce tight conditional lower bounds for the corresponding LWS instantiations. We also establish the (min,+)-convolution-hardness of the knapsack problem.

cs.CC↗

arXiv2016

Subquadratic Algorithms for Succinct Stable Matching

We consider the stable matching problem when the preference lists are not given explicitly but are represented in a succinct way and ask whether the problem becomes computationally easier and investigate other implications. We give subquadratic algorithms for finding a stable matching in special cases of natural succinct representations of the problem, the $d$-attribute, $d$-list, geometric, and single-peaked models. We also present algorithms for verifying a stable matching in the same models. We further show that for $d = ω(\log n)$ both finding and verifying a stable matching in the $d$-attribute and $d$-dimensional geometric models requires quadratic time assuming the Strong Exponential Time Hypothesis. This suggests that these succinct models are not significantly simpler computationally than the general case for sufficiently large $d$.

cs.DS↗

arXiv2016

Improved Protocols and Hardness Results for the Two-Player Cryptogenography Problem

The cryptogenography problem, introduced by Brody, Jakobsen, Scheder, and Winkler (ITCS 2014), is to collaboratively leak a piece of information known to only one member of a group (i)~without revealing who was the origin of this information and (ii)~without any private communication, neither during the process nor before. Despite several deep structural results, even the smallest case of leaking one bit of information present at one of two players is not well understood. Brody et al.\ gave a 2-round protocol enabling the two players to succeed with probability $1/3$ and showed the hardness result that no protocol can give a success probability of more than~$3/8$. In this work, we show that neither bound is tight. Our new hardness result, obtained by a different application of the concavity method used also in the previous work, states that a success probability better than 0.3672 is not possible. Using both theoretical and numerical approaches, we improve the lower bound to $0.3384$, that is, give a protocol leading to this success probability. To ease the design of new protocols, we prove an equivalent formulation of the cryptogenography problem as solitaire vector splitting game. Via an automated game tree search, we find good strategies for this game. We then translate the splits that occurred in this strategy into inequalities relating position values and use an LP solver to find an optimal solution for these inequalities. This gives slightly better game values, but more importantly, it gives a more compact representation of the protocol and a way to easily verify the claimed quality of the protocol. These improved bounds, as well as the large sizes and depths of the improved protocols we find, suggests that finding good protocols for the cryptogenography problem as well as understanding their structure are harder than what the simple problem formulation suggests.

cs.CR↗

arXiv2015

Quadratic Conditional Lower Bounds for String Problems and Dynamic Time Warping

Classic similarity measures of strings are longest common subsequence and Levenshtein distance (i.e., the classic edit distance). A classic similarity measure of curves is dynamic time warping. These measures can be computed by simple $O(n^2)$ dynamic programming algorithms, and despite much effort no algorithms with significantly better running time are known. We prove that, even restricted to binary strings or one-dimensional curves, respectively, these measures do not have strongly subquadratic time algorithms, i.e., no algorithms with running time $O(n^{2-\varepsilon})$ for any $\varepsilon > 0$, unless the Strong Exponential Time Hypothesis fails. We generalize the result to edit distance for arbitrary fixed costs of the four operations (deletion in one of the two strings, matching, substitution), by identifying trivial cases that can be solved in constant time, and proving quadratic-time hardness on binary strings for all other cost choices. This improves and generalizes the known hardness result for Levenshtein distance [Backurs, Indyk STOC'15] by the restriction to binary strings and the generalization to arbitrary costs, and adds important problems to a recent line of research showing conditional lower bounds for a growing number of quadratic time problems. As our main technical contribution, we introduce a framework for proving quadratic-time hardness of similarity measures. To apply the framework it suffices to construct a single gadget, which encapsulates all the expressive power necessary to emulate a reduction from satisfiability. Finally, we prove quadratic-time hardness for longest palindromic subsequence and longest tandem subsequence via reductions from longest common subsequence, showing that conditional lower bounds based on the Strong Exponential Time Hypothesis also apply to string problems that are not necessarily similarity measures.

cs.CC↗