arXiv subjects

Marvin L. Cohen

Publications and source records attributed to Marvin L. Cohen.

At least 37 records · Page 2Linked to original sources

arXiv2018

Simulating the nanomechanical response of cyclooctatetraene molecules on a graphene device

We investigate the atomic and electronic structures of cyclooctatetraene (COT) molecules on graphene and analyze their dependence on external gate voltage using first-principles calculations. The external gate voltage is simulated by adding or removing electrons using density functional theory (DFT) calculations. This allows us to investigate how changes in carrier density modify the molecular shape, orientation, adsorption site, diffusion barrier, and diffusion path. For increased hole doping COT molecules gradually change their shape to a more flattened conformation and the distance between the molecules and graphene increases while the diffusion barrier drastically decreases. For increased electron doping an abrupt transition to a planar conformation at a carrier density of -8$\times$10$^{13}$ e/cm$^2$ is observed. These calculations imply that the shape and mobility of adsorbed COT molecules can be controlled by externally gating graphene devices.

cond-mat.mtrl-sci↗

arXiv2018

Magnetism in amorphous carbon

We investigate magnetism in amorphous carbon as suggested by the recently reported ferromagnetism in a new form of amorphous carbon. We use spin constrained first-principles simulations to obtain amorphous carbon structures with the desired magnetization. We show that the existence of $sp^2$-like 3-fold coordinated carbon atoms plays an important role in obtaining magnetism in amorphous carbon. The detailed geometries of 3-fold carbon atoms induce the magnetic order in amorphous carbon.

cond-mat.mtrl-sci↗

arXiv2018

Torsional instability in the single-chain limit of a transition metal trichalcogenide

We report the synthesis of the quasi-one-dimensional transition metal trichalcogenide NbSe3 in the few chain limit, including the realization of isolated single chains. The chains are encapsulated in protective boron nitride or carbon nanotube sheaths to prevent oxidation and to facilitate characterization. Transmission electron microscopy reveals static and dynamic structural torsional waves not found in bulk NbSe3 crystals. Electronic structure calculations indicate that charge transfer drives the torsional wave instability. Very little covalent bonding is found between the chains and the nanotube sheath, leading to relatively unhindered longitudinal and torsional dynamics for the encapsulated chains.

cond-mat.mtrl-sci↗

arXiv2017

Simulating the effect of boron doping in superconducting carbon

We examine the effect of boron doping in superconducting forms of amorphous carbon. By judiciously optimizing boron substitutional sites in simulated amorphous carbon we predict a superconducting transition temperature near 37 K at 14 % boron concentration. Our findings have direct implications for understanding the recently discovered high T_$c$ superconductivity in Q-carbon.

cond-mat.supr-con↗

arXiv2017

A Class of topological nodal rings and its realization in carbon networks

Topological nodal rings can be classified into three types according to the slopes in their energy dispersion. The first two are made of type-I and II nodal points, respectively, while the third is made of both. In carbon networks, all three types can exist. Under strain, phase transitions from a topological metal to a semiconductor, take place, and at the transition points, these nodal rings shrink into type-I, II, and III semi-Dirac points. These topological features exhibit diverse electron-hole pocket patterns and Landau levels, which give rise to exotic transport properties.

cond-mat.mtrl-sci↗

arXiv2017

Real-space study of the optical absorption in alternative phases of silicon

We introduce a real-space approach to understand the relationship between optical absorption and crystal structure. We apply this approach to alternative phases of silicon, with a focus on the Si$_{20}$ crystal phase as a case study. We find that about 83% of the changes in the calculated low-energy absorption in Si$_{20}$ as compared to Si in the diamond structure can be attributed to reducing the differences between the on-site energies of the bonding and anti-bonding orbitals as well as increasing the hopping integrals for specific Si-Si bonds.

cond-mat.mtrl-sci↗

arXiv2017

Alternative structure of TiO2 with higher energy valence band edge

We propose an alternative structure of TiO2 anatase that has a higher energy oxygen p-like valence band maximum than the pristine TiO2 anatase and thus has a much better alignment with the water splitting levels. This alternative structure is unique when considering a large subspace of possible structural distortions of TiO2 anatase. We propose two routes towards this state and argue that one of them might have been realized in the recently discovered so-called black TiO2.

cond-mat.mtrl-sci↗

arXiv2017

Insulating titanium oxynitride for visible light photocatalysis

We propose a systematic approach to obtain various forms of insulating titanium oxynitrides Ti$_{n}$N$_{2}$O$_{2n-3}$ and we conduct a detailed study on its $n=2$ case, Ti$_{2}$N$_{2}$O. We study the energetics and the electronic structures of Ti$_{2}$N$_{2}$O and compare these results with those of pristine and nitrogen-doped TiO$_{2}$ within the framework of the density-functional theory (DFT) and the GW approximation. We find that Ti$_{2}$N$_{2}$O is semiconducting with the calculated band-gap of 1.81 eV, which is significantly smaller than those of pristine TiO$_{2}$ rutile (3.14 eV) or anatase (3.55 eV). Furthermore, the reduction of the band-gap of Ti$_{2}$N$_{2}$O is realized not by lowering of the conduction-band minimum but by rising the valence-band maximum. Therefore the proposed Ti$_{2}$N$_{2}$O has suitable band-edge alignment for water-splitting photocatalysis. Finally, total energy calculations indicate that Ti$_{2}$N$_{2}$O is potentially easier to synthesize than nitrogen-doped TiO$_{2}$. Based on these results, we propose Ti$_{2}$N$_{2}$O as a promising visible-light photocatalytic material.

cond-mat.mtrl-sci↗

arXiv2016

Antiferromagnetism enables electron-phonon coupling in iron-based superconductors

It is shown that a generic form of an antiferromagnetic wave function opens strong electron-phonon coupling channels in the iron-based superconductors. In the nonmagnetic state these channels exist locally on a single iron atom, but are canceled out between the two iron atoms in the primitive unit cell. Our findings are based on symmetry and the presence of an xz/yz Fermi surface near the M point and thus should be relevant for the known iron-based pnictide or chalcogenide superconductors.

cond-mat.supr-con↗

arXiv2016

Automated construction of maximally localized Wannier functions for bands with nontrivial topology

We show that an optimized projection functions method can automatically construct maximally localized Wannier functions even for bands with nontrivial topology. We demonstrate this method on a tight-binding model of a two-dimensional $\mathbb{Z}_2$ topological insulator, on a three-dimensional strong $\mathbb{Z}_2$ topological insulator, as well as on first-principles density functional theory calculated valence states of Bi$_2$Se$_3$. In all cases, the resulting Wannier functions contain large imaginary components and are more extended than those in the topologically trivial phase.

cond-mat.mtrl-sci↗

arXiv2016

Comparative study of high-Tc superconductivity in H3S and H3P

We report on a comparative study of the electronic structure, phonon spectra, and superconducting properties for recently discovered superconducting hydrides, H3S and H3P. While the electronic structures of these two materials are similar, there are notable changes in the phonon spectra and electron-phonon coupling. The low-frequency bond-bending modes are softened in H3P and their coupling to the electrons at the Fermi surface is enhanced relative to H3S. Nevertheless, coupling to the high-frequency modes is reduced so the resulting calculated superconducting transition temperature is reduced from ~166 K in H3S to ~76 K in H3P.

cond-mat.supr-con↗

arXiv2016

Proposal for a bulk material based on a monolayer FeSe on SrTiO3 high-temperature superconductor

Motivated by the high superconducting transition temperature of monolayer FeSe on SrTiO3, we propose a potential three-dimensional high-temperature superconductor superlattice FeSe-SrTiO3 and study its structural stability and electronic structure using density functional theory. We find that the binding energy between the FeSe and SrTiO3 layers is about 0.7 eV per (Fe2Se2) unit and that it saturates already within a single TiO2 atomic layer of SrTiO3. In addition we analyzed the dynamical stability of the superlattice and compared it to the case of bulk SrTiO3.

cond-mat.supr-con↗

arXiv2016

Inhibiting Klein tunneling in graphene p-n junction without an external magnetic field

We study by first-principles calculations a densely packed island of organic molecules (F4TCNQ) adsorbed on graphene. We find that with electron doping the island naturally forms a p-n junction in the graphene sheet. For example, a doping level of ~ 3 * 10^{13} electrons per cm^2 results in a p-n junction with 800 meV electrostatic potential barrier. Unlike in a conventional p-n junction in graphene, in the case of the junction formed by an adsorbed organic molecular island we expect that the Klein tunneling is inhibited, even without an applied external magnetic field. Here Klein tunneling is inhibited by the ferromagnetic order that spontaneously occurs in the molecular island upon doping. We estimate that the magnetic barrier in the graphene sheet is around 10 mT.

cond-mat.mes-hall↗

arXiv2016

Why do Collapsed Carbon Nanotubes Twist?

We study the collapsing and subsequent spontaneous twisting of a carbon nanotube by in-situ transmission electron microscopy. A custom-sized nanotube is first created in the microscope by selectively extracting shells from a parent multi-wall tube. The few-wall, large-diameter daughter nanotube is driven to collapse via mechanical stimulation, after which the ribbon-like collapsed tube spontaneously twists along its long axis. In-situ diffraction experiments fully characterize the uncollapsed and collapsed tubes. From the experimental observations and associated theoretical analysis, the origin of the twisting is determined to be compressive strain due to charge imbalance.

cond-mat.mes-hall↗

arXiv2016

Towards Three-Dimensional Weyl-SurfaceSemimetals in Graphene Networks

Graphene as a two-dimensional (2D) topological Dirac semimetal has attracted much attention for its outstanding properties and potential applications. However, three-dimensional (3D) topological semimetals for carbon materials are still rare. Searching for such materials with salient physics has become a new direction for carbon research. Here, using first-principles calculations and tight-binding modeling, we study three types of 3D graphene networks whose properties inherit those of Dirac electrons in graphene. In the band structures of these materials, two flat Weyl surfaces appear in the Brillouin zone (BZ), which straddle the Fermi level and are robust against external strain. When the networks are cut, the resulting lower-dimensional slabs and nanowires remain to be semimetallic with Weyl line-like and point-like Fermi surfaces, respectively. Between the Weyl lines, flat surface bands emerge with strong magnetism when each surface carbon atom is passivated by one hydrogen atom. The robustness of these structures can be traced back to a bulk topological invariant, ensured by the sublattice symmetry, and to the one-dimensional (1D) Weyl semimetal behavior of the zigzag carbon chain, which has been the common backbone to all these structures. The flat Weyl-surface semimetals may enable applications in correlated electronics, as well as in energy storage, molecular sieve, and catalysis because of their good stability, porous geometry, and large superficial area.

cond-mat.mtrl-sci↗

arXiv2015

Automated construction of maximally localized Wannier functions: Optimized projection functions method

Maximally localized Wannier functions are widely used in electronic structure theory for analyses of bonding, electric polarization, orbital magnetization, and for interpolation. The state of the art method for their construction is based on the method of Marzari and Vanderbilt. One of the practical difficulties of this method is guessing functions (initial projections) that approximate the final Wannier functions. Here we present an approach based on optimized projection functions that can construct maximally localized Wannier functions without a guess. We describe and demonstrate this approach on several realistic examples.

cond-mat.mtrl-sci↗

arXiv2015

Carbon Kagome lattice and orbital frustration-induced metal-insulator transition for optoelectronics

A three-dimensional elemental carbon Kagome lattice (CKL), made of only fourfold coordinated carbon atoms, is proposed based on first-principles calculations. Despite the existence of 60° bond angles in the triangle rings, widely perceived to be energetically unfavorable, the CKL is found to display exceptional stability comparable to that of C60. The system allows us to study the effects of triangular frustration on the electronic properties of realistic solids, and it demonstrates a metal-insulator transition from that of graphene to a direct gap semiconductor in the visible blue region. By minimizing s-p orbital hybridization, which is an intrinsic property of carbon, not only the band edge states become nearly purely frustrated p states, but also the band structure is qualitatively different from any known bulk elemental semiconductors. For example, the optical properties are similar to those of direct-gap semiconductors GaN and ZnO, whereas the effective masses are comparable or smaller than those of Si.

cond-mat.mtrl-sci↗

arXiv2015

Large electron-phonon interactions from FeSe phonons in a monolayer

We show that electron-phonon coupling can induce strong electron pairing in an FeSe monolayer on a SrTiO3 substrate (experimental indications for superconducting Tc are between 65 and 109K). The role of the SrTiO3 substrate in increasing the coupling is two-fold. First, the interaction of the FeSe and TiO2 terminated face of SrTiO3 prevents the FeSe monolayer from undergoing a shear-type (orthorhombic, nematic) structural phase transition. Second, the substrate allows an anti-ferromagnetic ground state of FeSe which opens electron-phonon coupling channels within the monolayer that are prevented by symmetry in the non-magnetic phase. The spectral function for the electron-phonon coupling (alpha2F) in our calculations agrees well with inelastic tunneling data.

cond-mat.supr-con↗