arXiv subjects

Marzieh Najafi

Publications and source records attributed to Marzieh Najafi.

At least 19 recordsLinked to original sources

arXiv2024

100 Gbps Indoor Access and 4.8 Gbps Outdoor Point-to-Point LiFi Transmission Systems using Laser-based Light Sources

In this paper, we demonstrate the communication capabilities of light-fidelity (LiFi) systems based on highbrightness and high-bandwidth integrated laser-based sources in a surface mount device (SMD) packaging platform. The laserbased source is able to deliver 450 lumens of white light illumination and the resultant light brightness is over 1000 cd mm2. It is demonstrated that a wavelength division multiplexing (WDM) LiFi system with ten parallel channels is able to deliver over 100 Gbps data rate with the assistance of Volterra filter-based nonlinear equalisers. In addition, an aggregated transmission data rate of 4.8 Gbps has been achieved over a link distance of 500 m with the same type of SMD light source. This work demonstrates the scalability of LiFi systems that employ laserbased light sources, particularly in their capacity to enable highspeed short range, as well as long-range data transmission.

eess.SY↗

arXiv2023

Optical IRSs: Power Scaling Law, Optimal Deployment, and Comparison with Relays

The line-of-sight (LOS) requirement of free-space optical (FSO) systems can be relaxed by employing optical relays or optical intelligent reflecting surfaces (IRSs). In this paper, we show that the power reflected from FSO IRSs and collected at the receiver (Rx) lens may scale quadratically or linearly with the IRS size or may saturate at a constant value. We analyze the power scaling law for optical IRSs and unveil its dependence on the wavelength, transmitter (Tx)-to-IRS and IRS-to-Rx distances, beam waist, and Rx lens size. We also consider the impact of linear, quadratic, and focusing phase shift profiles across the IRS on the power collected at the Rx lens for different IRS sizes. Our results reveal that surprisingly the powers received for the different phase shift profiles are identical, unless the IRS operates in the saturation regime. Moreover, IRSs employing the focusing (linear) phase shift profile require the largest (smallest) size to reach the saturation regime. We also compare optical IRSs in different power scaling regimes with optical relays in terms of the outage probability, diversity and coding gains, and optimal placement. Our results show that, at the expense of a higher hardware complexity, relay-assisted FSO links yield a better outage performance at high signal-to-noise-ratios (SNRs), but optical IRSs can achieve a higher performance at low SNRs. Moreover, while it is optimal to place relays equidistant from Tx and Rx, the optimal location of optical IRSs depends on the phase shift profile and the power scaling regime they operate in.

eess.SP↗

arXiv2022

Power Scaling Law for Optical IRSs and Comparison with Optical Relays

The line-of-sight (LOS) requirement of free-space optical (FSO) systems can be relaxed by employing optical relays and optical intelligent reflecting surfaces (IRSs). Unlike radio frequency (RF) IRSs, which typically exhibit a quadratic power scaling law, the power reflected from FSO IRSs and collected at the receiver lens may scale quadratically or linearly with the IRS size or may even saturate at a constant value. We analyze the power scaling law for optical IRSs and unveil its dependence on the wavelength, transmitter (Tx)-to-IRS and IRS-to-receiver (Rx) distances, beam waist, and lens size. We compare optical IRSs in different power scaling regimes with optical relays in terms of the outage probability, diversity and coding gains, and optimal placement. Our results show that, at the expense of a higher hardware complexity, relay-assisted FSO links yield a better outage performance at high signal-to-noise-ratios (SNRs), but optical IRSs can achieve a higher performance at low SNRs. Moreover, while it is optimal to place relays equidistant from Tx and Rx, the optimal location of IRSs depends on the power scaling regime they operate in.

eess.SP↗

arXiv2021

Modeling and Design of IRS-Assisted Multi-Link FSO Systems

In this paper, we investigate the modeling and design of intelligent reflecting surface (IRS)-assisted optical communication systems which are deployed to relax the line-of-sight (LOS) requirement in multi-link free space optical (FSO) systems. The FSO laser beams incident on the optical IRSs have a Gaussian power intensity profile and a nonlinear phase profile, whereas the plane waves in radio frequency (RF) systems have a uniform power intensity profile and a linear phase profile. Given these substantial differences, the results available for IRS-assisted RF systems are not applicable to IRS-assisted FSO systems. Therefore, we develop a new analytical channel model for point-to-point IRS-assisted FSO systems based on the Huygens-Fresnel principle. Our analytical model captures the impact of the size, position, and orientation of the IRS as well as its phase shift profile on the end-to-end channel. To allow the sharing of the optical IRS by multiple FSO links, we propose three different protocols, namely the time division (TD), IRS-division (IRSD), and IRS homogenization (IRSH) protocols. The proposed protocols address the specific characteristics of FSO systems including the non-uniformity and possible misalignment of the laser beams. Furthermore, to compare the proposed IRS sharing protocols, we analyze the bit error rate (BER) and the outage probability of IRS-assisted multi-link FSO systems in the presence of inter-link interference. Our simulation results validate the accuracy of the proposed analytical channel model for IRS-assisted FSO systems and confirm that this model is applicable for both large and intermediate IRS-receiver lens distances. Moreover, in the absence of misalignment errors, the IRSD protocol outperforms the other protocols, whereas in the presence of misalignment errors, the IRSH protocol performs significantly better than the IRSD protocol.

eess.SP↗

arXiv2021

Intelligent Reflecting Surface-assisted Free-space Optical Communications

Free-space optical (FSO) systems are able to offer the high data-rate, secure, and cost-efficient communication links required for applications such as wireless front- and backhauling for 5G and 6G communication networks. Despite the substantial advancement of FSO systems over the past decades, the requirement of a line-of-sight connection between transmitter and receiver remains a key limiting factor for their deployment. In this paper, we discuss the potential role of intelligent reflecting surfaces (IRSs) as a solution to relax this requirement. We present an overview of existing optical IRS technologies; compare optical IRSs with radio-frequency IRSs and optical relays; and identify various open problems for future research on IRS-assisted FSO communications.

eess.SP↗

arXiv2021

Intelligent Reflecting Surfaces for Free Space Optical Communications

In this paper, we investigate the use of intelligent reflecting surfaces (IRSs) to relax the line-of-sight requirement of free space optical (FSO) systems. Considering a Gaussian laser beam, we first design a phase-shift distribution across the IRS that enables the reflection of the incident beam in any desired direction, i.e., realizing the generalized law of reflection. Moreover, for the designed phase-shift profile, we show that there exists an equivalent mirror-assisted FSO system that generates a reflected electric field on a mirror that is identical to that on the IRS in the original system. However, the location of the laser source and the properties of the emitted Gaussian laser beam are different in the original and the equivalent systems. This equivalence allows us to study the mirror-assisted system, employing the image method from geometric optics, instead of directly analyzing the original IRS-assisted system. Based on this analysis, we model the geometric and misalignment losses (GML) and characterize the impact of the physical parameters of the IRS, such as its size, position, and orientation, on the end-to-end FSO channel. Moreover, we develop a statistical model for the GML which accounts for the random movements of IRS, transmitter (Tx), and receiver (Rx) due to building sway. Furthermore, we analyze the outage probability of an IRS-assisted FSO link based on the derived channel model. Our simulation results validate the accuracy of the developed channel model and offer various insights for system design. For instance, both our simulations and theoretical analysis reveal that even if the variances of the fluctuations of the Tx, IRS, and Rx positions caused by building sway are identical, their impact on the end-to-end channel is not necessarily the same and depends on the relative positioning of these three nodes.

cs.IT↗

arXiv2020

Channel Modeling for IRS-Assisted FSO Systems

In this paper, we develop an analytical channel model for intelligent reflecting surface (IRS)-assisted free space optical (FSO) systems. Unlike IRS-assisted radio frequency systems, where it is typically assumed that a plane wave is incident on the IRS, in FSO systems, the incident wave is a Gaussian beam with non-uniform power distribution across the IRS. Taking this property into account, we develop an analytical end-to-end channel model for IRS-assisted FSO systems based on the Huygens-Fresnel principle. Our analytical model reveals the impact of the size, position, orientation, and phase-shift configuration of the IRS on the end-to-end channel. Furthermore, we show that results obtained based on geometric optics under the far-field approximation are only valid for a specific range of IRS-receiver lens distances depending on the IRS size, incident beam width, and wavelength. Simulation results validate the accuracy of the proposed analytical results for the FSO beam reflected from the IRS and compare the bit error rate performance obtained for the proposed analytical channel model with that obtained for geometric optics under the far-field approximation.

eess.SP↗

arXiv2020

Physics-based Modeling and Scalable Optimization of Large Intelligent Reflecting Surfaces

Intelligent reflecting surfaces (IRSs) have the potential to transform wireless communication channels into smart reconfigurable propagation environments. To realize this new paradigm, the passive IRSs have to be large, especially for communication in far-field scenarios, so that they can compensate for the large end-to-end path-loss, which is caused by the multiplication of the individual path-losses of the transmitter-to-IRS and IRS-to-receiver channels. However, optimizing a large number of sub-wavelength IRS elements imposes a significant challenge for online transmission. To address this issue, in this paper, we develop a physics-based model and a scalable optimization framework for large IRSs. The basic idea is to partition the IRS unit cells into several subsets, referred to as tiles, model the impact of each tile on the wireless channel, and then optimize each tile in two stages, namely an offline design stage and an online optimization stage. For physics-based modeling, we borrow concepts from the radar literature, model each tile as an anomalous reflector, and derive its impact on the wireless channel for a given phase shift by solving the corresponding integral equations for the electric and magnetic vector fields. In the offline design stage, the IRS unit cells of each tile are jointly designed for the support of different transmission modes, where each transmission mode effectively corresponds to a given configuration of the phase shifts that the unit cells of the tile apply to an impinging electromagnetic wave. In the online optimization stage, the best transmission mode of each tile is selected such that a desired quality-of-service (QoS) criterion is maximized. We show that the proposed modeling and optimization framework can be used to efficiently optimize large IRSs comprising thousands of unit cells.

cs.IT↗

arXiv2020

Power Efficiency, Overhead, and Complexity Tradeoff in IRS-Assisted Communications -- Quadratic Phase-Shift Design

In this paper, we focus on large intelligent reflecting surfaces (IRSs) and propose a new codebook construction method to obtain a set of predesigned phase-shift configurations for the IRS unit cells. Since the overhead for channel estimation and the complexity of online optimization for IRS-assisted communications scale with the size of the phase-shift codebook, the design of small codebooks is of high importance. We show that there exists a fundamental tradeoff between power efficiency and the size of the codebook. We first analyze this tradeoff for baseline designs that employ a linear phase-shift across the IRS. Subsequently, we show that an efficient design for small codebooks mandates higher-order phase-shift variations across the IRS. Consequently, we propose a quadratic phase-shift design, derive its coefficients as a function of the codebook size, and analyze its performance. Our simulation results show that the proposed design yields a higher power efficiency for small codebooks than the linear baseline designs.

cs.IT↗

arXiv2020

Physics-based Modeling of Large Intelligent Reflecting Surfaces for Scalable Optimization

In this paper, we develop a physics-based model that allows a scalable optimization of large intelligent reflecting surfaces (IRSs). The basic idea is to partition the IRS unit cells into several subsets, referred to as tiles, and model the impact of each tile on the wireless channel. Borrowing concepts from the radar literature, we model each tile as an anomalous reflector, and derive its impact on the wireless channel for given unit cell phase shifts by solving the corresponding integral equations for the electric and magnetic vector fields. Based on this model, one can design the phase shifts of the unit cells of a tile offline for the support of several transmission modes and then select the best mode online for a given channel realization. Therefore, the number of tiles and transmission modes in the proposed model are design parameters that can be adjusted to trade performance for complexity.

eess.SP↗

arXiv2020

Statistical Modeling of the FSO Fronthaul Channel for UAV-based Communications

In this paper, we investigate the statistics of the free space optics (FSO) communication channel between a hovering unmanned aerial vehicle (UAV) and a central unit. Two unique characteristics make UAV-based FSO systems significantly different from conventional FSO systems with static transceivers. First, for UAV-based FSO systems, the incident laser beam is not always orthogonal to the receiver lens plane. Second, both position and orientation of the UAV fluctuate over time due to dynamic wind load, inherent random air fluctuations in the atmosphere around the UAV, and internal vibrations of the UAV. On the contrary, for conventional FSO systems, the laser beam is always perpendicular to the receiver lens plane and the relative movement of the transceivers is limited. In this paper, we develop a novel channel model for UAV-based FSO systems by quantifying the corresponding geometric and misalignment losses (GML), while taking into account the non-orthogonality of the laser beam and the random fluctuations of the position and orientation of the UAV. In particular, for diverse weather conditions, we propose different fluctuation models for the position and orientation of the UAV and derive corresponding statistical models for the GML. We further analyze the performance of a UAV-based FSO link in terms of outage probability and ergodic rate and simplify the resulting analytical expressions for the high signal-to-noise ratio (SNR) regime. Finally, simulations validate the accuracy of the presented analysis and provide important insights for system design. For instance, we show that for a given variance of the fluctuations, the beam width should be properly adjusted to minimize the outage probability.

eess.SP↗

arXiv2020

Ergodic Sum Rate Analysis of UAV-Based Relay Networks with Mixed RF-FSO Channels

Unmanned aerial vehicle (UAV)-based communications is a promising new technology that can add a wide range of new capabilities to the current network infrastructure. Given the flexibility, cost-efficiency, and convenient use of UAVs, they can be deployed as temporary base stations (BSs) for on-demand situations like BS overloading or natural disasters. In this work, a UAV-based communication system with radio frequency (RF) access links to the mobile users (MUs) and a free-space optical (FSO) backhaul link to the ground station (GS) is considered. In particular, the RF and FSO channels in this network depend on the UAV's positioning and (in)stability. The relative position of the UAV with respect to the MUs impacts the likelihood of a line-of-sight (LOS) connection in the RF link and the instability of the hovering UAV affects the quality of the FSO channel. Thus, taking these effects into account, we analyze the end-to-end system performance of networks employing UAVs as buffer-aided (BA) and non-buffer-aided (non-BA) relays in terms of the ergodic sum rate. Simulation results validate the accuracy of the proposed analytical derivations and reveal the benefits of buffering for compensation of the random fluctuations caused by the UAV's instability. Our simulations also show that the ergodic sum rate of both BA and non-BA UAV-based relays can be enhanced considerably by optimizing the positioning of the UAV. We further study the impact of the MU density and the weather conditions on the end-to-end system performance.

eess.SP↗

arXiv2019

Intelligent Reflecting Surfaces for Free Space Optical Communications

In this paper, we investigate the use of intelligent reflecting surfaces (IRSs) (i.e., smart mirrors) to relax the line-of-sight requirement of free space optical (FSO) systems. We characterize the impact of the physical parameters of the IRS, such as its size, position, and orientation, on the quality of the end-to-end FSO channel. In addition, we develop a statistical channel model for the geometric and the misalignment losses which accounts for the random movements of the IRS, transmitter, and receiver due to building sway. This model can be used for performance analysis of IRS-based FSO systems. Our analytical results shows that depending on the angle between the beam direction and the IRS plane, building sway for the IRS has either a smaller or larger impact on the quality of the end-to-end FSO channel than building sway for the transmitter and receiver. Furthermore, our simulation results validate the accuracy of the developed channel model and offer insight for system design.

cs.IT↗

arXiv2018

C-RAN with Hybrid RF/FSO Fronthaul Links: Joint Optimization of RF Time Allocation and Fronthaul Compression

This paper considers the uplink of a cloud radio access network (C-RAN) comprised of several multi-antenna remote radio units (RUs) which compress the signals that they receive from multiple mobile users (MUs) and forward them to a CU via wireless fronthaul links. To enable reliable high rate fronthaul links, we employ a hybrid radio frequency (RF)/free space optical (FSO) system for fronthauling. To strike a balance between complexity and performance, we consider three different quantization schemes at the RUs, namely per-antenna vector quantization (AVQ), per-RU vector quantization (RVQ), and distributed source coding (DSC), and two different receivers at the CU, namely the linear minimum mean square error receiver and the optimal successive interference cancellation receiver. For this network architecture, we investigate the joint optimization of the quantization noise covariance matrices at the RUs and the RF time allocation to the multiple-access and fronthaul links for rate region maximization. To this end, we formulate a unified weighted sum rate maximization problem valid for each possible pair of the considered quantization and detection schemes. To handle the non-convexity of the unified problem, we transform it into a bi-convex problem which facilitates the derivation of an efficient suboptimal solution using alternating convex optimization and golden section search. Our simulation results show that for each pair of the considered quantization and detection schemes, C-RAN with hybrid RF/FSO fronthauling can achieve a considerable sum rate gain compared to conventional systems employing pure FSO fronthauling, especially under unfavorable atmospheric conditions. Moreover, employing a more sophisticated quantization scheme can significantly improve the system performance under adverse atmospheric conditions.

cs.IT↗

arXiv2017

Statistical Modeling of FSO Fronthaul Channel for Drone-based Networks

We consider a drone-based communication network, where several drones hover above an area and serve as mobile remote radio heads for a large number of mobile users. We assume that the drones employ free space optical (FSO) links for fronthauling of the users' data to a central unit. The main focus of this paper is to quantify the geometric loss of the FSO channel arising from random fluctuation of the position and orientation of the drones. In particular, we derive upper and lower bounds, corresponding approximate expressions, and a closed-form statistical model for the geometric loss. Simulation results validate our derivations and quantify the FSO channel quality as a function of the drone's instability, i.e., the variation of its position and orientation.

cs.IT↗

arXiv2017

Non-Orthogonal Multiple Access for FSO Backhauling

We consider a free space optical (FSO) backhauling system which consists of two base stations (BSs) and one central unit (CU). We propose to employ non-orthogonal multiple access (NOMA) for FSO backhauling where both BSs transmit at the same time and in the same frequency band to the same photodetector at the CU. We develop a dynamic NOMA scheme which determines the optimal decoding order as a function of the channel state information at the CU and the quality of service requirements of the BSs, such that the outage probabilities of both BSs are jointly minimized. Moreover, we analyze the performance of the proposed NOMA scheme in terms of the outage probability over Gamma-Gamma FSO turbulence channels. We further derive closed-form expressions for the outage probability for the high signal-to-noise ratio regime. Our simulation results confirm the analytical derivations and reveal that the proposed dynamic NOMA scheme significantly outperforms orthogonal transmission and existing NOMA schemes.

eess.SP↗

arXiv2017

Power Allocation and Cooperative Diversity in Two-Way Non-Regenerative Cognitive Radio Networks

In this paper, we investigate the performance of a dual-hop block fading cognitive radio network with underlay spectrum sharing over independent but not necessarily identically distributed (i.n.i.d.) Nakagami-$m$ fading channels. The primary network consists of a source and a destination. Depending on whether the secondary network which consists of two source nodes have a single relay for cooperation or multiple relays thereby employs opportunistic relay selection for cooperation and whether the two source nodes suffer from the primary users' (PU) interference, two cases are considered in this paper, which are referred to as Scenario (a) and Scenario (b), respectively. For the considered underlay spectrum sharing, the transmit power constraint of the proposed system is adjusted by interference limit on the primary network and the interference imposed by primary user (PU). The developed new analysis obtains new analytical results for the outage capacity (OC) and average symbol error probability (ASEP). In particular, for Scenario (a), tight lower bounds on the OC and ASEP of the secondary network are derived in closed-form. In addition, a closed from expression for the end-to-end OC of Scenario (a) is achieved. With regards to Scenario (b), a tight lower bound on the OC of the secondary network is derived in closed-form. All analytical results are corroborated using Monte Carlo simulation method.

cs.IT↗

arXiv2017

C-RAN with Hybrid RF/FSO Fronthaul Links: Joint Optimization of RF Time Allocation and Fronthaul Compression

This paper considers the uplink of a cloud radio access network (C-RAN) comprised of several multi-antenna remote radio units (RUs) which send the data that they received from multiple mobile users (MUs) to a central unit (CU) via a wireless fronthaul link. One of the fundamental challenges in implementing C-RAN is the huge data rate required for fronthauling. To address this issue, we employ hybrid radio frequency (RF)/free space optical (FSO) systems for the fronthaul links as they benefit from both the large data rates of FSO links and the reliability of RF links. To efficiently exploit the fronthaul capacity, the RUs employ vector quantization to jointly compress the signals received at their antennas. Moreover, due to the limited available RF spectrum, we assume that the RF multiple-access and fronthaul links employ the same RF resources. Thereby, we propose an adaptive protocol which allocates transmission time to the RF multiple-access and fronthaul links in a time division duplex (TDD) manner and optimizes the quantization noise covariance matrix at each RU such that the sum rate is maximized. Our simulation results reveal that a considerable gain in terms of sum rate can be achieved by the proposed protocol in comparison with benchmark schemes from the literature, especially when the FSO links experience unfavorable atmospheric conditions.

cs.IT↗