arXiv subjects

Masahiro Motosuke

Publications and source records attributed to Masahiro Motosuke.

3 recordsLinked to original sources

arXiv2022

Lubrication effects on droplet manipulation by electrowetting-on-dielectric (EWOD)

Electrowetting has a potential to realize stand-alone point-of-care (POC) devices. Here we report droplet-migration characteristics on oil-infused electrowetting-on-dielectric (EWOD) substrates. We prepare sparse micropillars to retain the oil layer in order to exploit the layer as a lubricating film. A physical model of the droplet velocity is developed, and effects of the lubrication, the oil viscosity, the droplet volume, and the thickness of solid and liquid dielectric layers are discussed. It is found that the droplet velocity is scaled as square of E, which differs from a relationship of cube of E for droplets sliding down on liquid-infused surfaces by gravity. Furthermore, our device achieves droplet velocity of 1 mm/s at the applied voltage of 15 V. The velocity is approximately tenfold as high as the same condition (applied voltage and oil viscosity) on porous-structure-based liquid-infused surfaces. The achieved high velocity is explained by a lubrication-flow effect.

physics.flu-dyn↗

arXiv2018

Concentration-adjustable micromixer using droplet injection into a microchannel

A novel micromixing technique that exploit a thrust of droplets into the mixing interface is developed. The technique enhances the mixing by injecting immiscible droplets in a mixing channel and the methodology enables a control of the mixing level simply by changing the droplet injection frequency. We experimentally characterize the mixing performance with various droplet injection frequencies, channel geometries, and diffusion coefficients. Consequently, it is revealed that the mixing level increases with the injection frequency, the droplet-diameter-to-channel-width ratio, and the diffusion coefficient. Moreover, the mixing level is found to be a linear function of the droplet volume fraction in the mixing section. The results suggest that the developed technique can produce a large amount of sample solution whose concentration is arbitrary and precisely controllable with a simple and stable operation.

physics.flu-dyn↗

arXiv2017

Initiation of the Worthington jet on the droplet impact

Deformation of liquid droplets by impingement induces Worthington jet in certain range of the impact velocity. Although the growth of the jet as well as its tip velocity is predicted from similar cases to the droplet impact, the mechanism of the jet generation is yet to be understood. In this study, high-speed visualization of the droplet impact on a superhydrophobic surface was conducted to understand the initiation of the jet generated by a collapse of an air cavity. Water droplets whose diameter are 2.0 mm and 3.0 mm were generated and the Weber number of the droplet was varied in a range of 2 to 20. The jet velocity was measured from the captured images and it was found that it has a peak at the Weber number equals to approximately seven. The resulting jet velocity at the peak was approximately 15 folds higher than the impact velocity. Moreover, we observed that surface waves were generated by a collision of the droplet on the solid and the waves induced an oscillation of the droplet cap as they propagate from the solid-liquid contact line to the top portion of the droplet. Furthermore, we found the phase of the oscillation is related to the Weber number and it influences the jet velocity significantly, as it determines the initial condition of the jet generation.

physics.flu-dyn↗