arXiv subjects

Masahiro N. Machida

Publications and source records attributed to Masahiro N. Machida.

At least 109 records · Page 6Linked to original sources

arXiv2017

ALMA Observations of the Protostar L1527 IRS: Probing Details of the Disk and the Envelope Structures

We have newly observed the Class 0/I protostar L1527 IRS using the Atacama Large Millimeter/submillimeter Array (ALMA) during its Cycle 1 in 220 GHz dust continuum and C18O (J=2-1) line emissions with a ~2 times higher angular resolution (~0.5") and ~4 times better sensitivity than our ALMA Cycle 0 observations. Continuum emission shows elongation perpendicular to the associated outflow, with a deconvolved size of 0.53"x0.15". C18O emission shows similar elongation, indicating that both emissions trace the disk and the flattened envelope surrounding the protostar. The velocity gradient of the C18O emission along the elongation due to rotation of the disk/envelope system is re-analyzed, identifying Keplerian rotation proportional to r^-0.5 more clearly than the Cycle 0 observations. The Keplerian-disk radius and the dynamical stellar mass are kinematically estimated to be ~74 AU and ~0.45 Mo, respectively. The continuum visibility is fitted by models without any annulus averaging, revealing that the disk is in hydrostatic equilibrium. The best-fit model also suggests a density jump by a factor of ~5 between the disk and the envelope, suggesting that disks around protostars can be geometrically distinguishable from the envelope from a viewpoint of density contrast. Importantly, the disk radius geometrically identified with the density jump is consistent with the radius kinematically estimated. Possible origin of the density jump due to the mass accretion from the envelope to the disk is discussed. C18O observations can be reproduced by the same geometrical structures derived from the dust observations, with possible C18O freeze-out and localized C18O desorption.

astro-ph.SR↗

arXiv2017

Massive Outflows Driven by Magnetic Effects in Star Forming Clouds with High Mass Accretion Rates

The relation between the mass accretion rate onto the circumstellar disc and the rate of mass ejection by magnetically driven winds is investigated using three-dimensional magnetohydrodynamics simulations. Using a spherical cloud core with a varying ratio of thermal to gravitational energy, which determines the mass accretion rate onto the disc, to define the initial conditions, the outflow propagation for approximately 10^4 yr after protostar formation is then calculated for several cloud cores. The mass ejection rate and accretion rate are comparable only when the magnetic energy of the initial cloud core is comparable to the gravitational energy. Consequently, in strongly magnetised clouds a higher mass accretion rate naturally produces both massive protostars and massive outflows. The simulated outflow mass, momentum, kinetic energy and momentum flux agree well with observations, indicating that massive stars form through the same mechanism as low-mass stars but require a significantly strong magnetic field to launch massive outflows.

astro-ph.SR↗

arXiv2017

Circumstellar disks and outflows in turbulent molecular cloud cores: possible formation mechanism for misaligned systems

We investigate the formation of circumstellar disks and outflows subsequent to the collapse of molecular cloud cores with the magnetic field and turbulence. Numerical simulations are performed by using an adaptive mesh refinement to follow the evolution up to $\sim 1000$~yr after the formation of a protostar. In the simulations, circumstellar disks are formed around the protostars; those in magnetized models are considerably smaller than those in nonmagnetized models, but their size increases with time. The models with stronger magnetic field tends to produce smaller disks. During evolution in the magnetized models, the mass ratios of a disk to a protostar is approximately constant at $\sim 1-10$\%. The circumstellar disks are aligned according to their angular momentum, and the outflows accelerate along the magnetic field on the $10-100$~au scale; this produces a disk that is misaligned with the outflow. The outflows are classified into two types: a magneto-centrifugal wind and a spiral flow. In the latter, because of the geometry, the axis of rotation is misaligned with the magnetic field. The magnetic field has an internal structure in the cloud cores, which also causes misalignment between the outflows and the magnetic field on the scale of the cloud core. The distribution of the angular momentum vectors in a core also has a non-monotonic internal structure. This should create a time-dependent accretion of angular momenta onto the circumstellar disk. Therefore, the circumstellar disks are expected to change their orientation as well as their sizes in the long-term evolutions.

astro-ph.SR↗

arXiv2017

Grand Design Spiral Arms in A Young Forming Circumstellar Disk

We study formation and long-term evolution of a circumstellar disk in a collapsing molecular cloud core using a resistive magnetohydrodynamic simulation. While the formed circumstellar disk is initially small, it grows as accretion continues and its radius becomes as large as 200 AUs toward the end of the Class-I phase. A pair of grand-design spiral arms form due to gravitational instability in the disk, and they transfer angular momentum in the highly resistive disk. Although the spiral arms disappear in a few rotations as expected in a classical theory, new spiral arms form recurrently as the disk soon becomes unstable again by gas accretion. Such recurrent spiral arms persist throughout the Class-0 and I phase. We then perform synthetic observations and compare our model with a recent high-resolution observation of a young stellar object Elias 2-27, whose circumstellar disk has grand design spiral arms. We find good agreement between our theoretical model and the observation. Our model suggests that the grand design spiral arms around Elias 2-27 are consistent with material arms formed by gravitational instability. If such spiral arms commonly exist in young circumstellar disks, it implies that young circumstellar disks are considerably massive and gravitational instability is the key process of angular momentum transport.

astro-ph.SR↗

arXiv2016

ALMA band 8 continuum emission from Orion Source I

We have measured continuum flux densities of a high-mass protostar candidate, a radio source I in the Orion KL region (Orion Source I) using the Atacama Large Millimeter/Submillimeter Array (ALMA) at band 8 with an angular resolution of 0.1". The continuum emission at 430, 460, and 490 GHz associated with Source I shows an elongated structure along the northwest-southeast direction perpendicular to the so-called low-velocity bipolar outflow. The deconvolved size of the continuum source, 90 au times 20 au, is consistent with those reported previously at other millimeter/submillimeter wavelength. The flux density can be well fitted to the optically thick black-body spectral energy distribution (SED), and the brightness temperature is evaluated to be 700-800 K. It is much lower than that in the case of proton-electron or H- free-free radiations. Our data are consistent with the latest ALMA results by Plambeck & Wright (2016), in which the continuum emission have been proposed to arise from the edge-on circumstellar disk via thermal dust emission, unless the continuum source consists of an unresolved structure with the smaller beam filling factor.

astro-ph.GA↗

arXiv2016

The Origin of the Rotation Profiles in Star Forming Clouds

Angular momentum distribution and its redistribution are of crucial importance in formation and evolution of circumstellar disks. Many molecular line observations toward young stellar objects indicate that radial distributions of the specific angular momentum $j$ are more or less universal. In small scales, typically $R\lesssim$ 100 AU, the specific angular momenta distribute like $j\propto r^{1/2}$, indicating existence of rotationally supported disk. In outer regions, $R\gtrsim$ 5000 AU, $j$ increases as the radius increases and the slope is steeper than unity, which is supposed to reflect the original angular momentum distributions in the maternal molecular clouds. And lastly there is a connecting region, 100 AU $\lesssim R \lesssim$ 5000 AU, in which $j$-distribution looks almost flat. While this is often interpreted as a consequence of conservation of the specific angular momentum, it actually is insufficient and requires a stronger condition that the initial distribution of $j$ must be spatially uniform. However, this requirement is unrealistic and inconsistent with observations. In this work, we propose a simple alternative explanation; the flat $j$ profile is produced by strong prolongation due to the large velocity gradient in the accreting flow no matter what the initial $j$ distribution is. We provide a simple analytic model for gravitational collapse of molecular clouds. This model can be used to estimate ages of protostars based solely on the observed rotation profile. We demonstrate its validity in comparison with hydrodynamic simulations, and apply the model to young stellar objects such as L1527 IRS, TMC-1A and B335.

astro-ph.SR↗

arXiv2016

Revealing a detailed mass distribution of a high-density core MC27/L1521F in Taurus with ALMA

We present the results of ALMA observations of dust continuum emission and molecular rotational lines toward a dense core MC27 (aka L1521F) in Taurus, which is considered to be at a very early stage of star formation. The detailed column density distribution on size scales from a few tens AU to ~10,000 AU scale are revealed by combining the ALMA (12 m array + 7 m array) data with the published/unpublished single-dish data. The high angular resolution observations at 0.87 mm with a synthesized beam size of ~0."74 x 0."32 reveal that a protostellar source, MMS-1, is not spatially resolved and lacks associated gas emission, while a starless high-density core, MMS-2, has substructures both in dust and molecular emission. The averaged radial column density distribution of the inner part of MC27/L1521F (r $\lesssim$ 3000 AU) is N(H2) ~r$^{-0.4}$, clearly flatter than that of the outer part, ~r$^{-1.0}$. The complex velocity/spatial structure obtained with previous ALMA observations is located inside the inner flatter region, which may reflect the dynamical status of the dense core.

astro-ph.GA↗

arXiv2015

ALMA Observations of the Transition from Infall Motion to Keplerian Rotation around the Late-phase Protostar TMC-1A

We have observed the Class I protostar TMC-1A with Atacama Millimeter/submillimeter Array (ALMA) in 12CO and C18O (J=2-1), and 1.3-mm dust continuum emission. Continuum emission with a deconvolved size of 0.50"x0.37", perpendicular to the 12CO outflow, is detected. It most likely traces a circumstellar disk around TMC-1A, as previously reported. In contrast, a more extended structure is detected in C18O although it is still elongated with a deconvolved size of 3.3"x2.2", indicating that C18O traces mainly a flattened envelope surrounding the disk and the central protostar. C18O shows a clear velocity gradient perpendicular to the outflow at higher velocities, indicative of rotation, while an additional velocity gradient along the outflow is found at lower velocities. The radial profile of the rotational velocity is analyzed in detail, finding that it is given as a power-law \propto r^{-a} with an index of ~0.5 at higher velocities. This suggests that the rotation at higher velocities can be explained as Keplerian rotation orbiting a protostar with a dynamical mass of 0.68 Mo (inclination-corrected). The additional velocity gradient of C18O along the outflow is considered to be mainly infall motions in the envelope. Position-Velocity diagrams made from models consisting of an infalling envelope and a Keplerian disk are compared with the observations, revealing that the observed infall velocity is ~0.3 times smaller than the free fall velocity yielded by the dynamical mass of the protostar. Magnetic fields could be responsible for the slow infall velocity. A possible scenario of Keplerian disk formation is discussed.

astro-ph.SR↗

arXiv2015

Effects of Ohmic and ambipolar diffusion on the formation and evolution of the first cores, protostars and circumstellar discs

We investigate the formation and evolution of a first core, protostar, and circumstellar disc with a three-dimensional non-ideal (including both Ohmic and ambipolar diffusion) radiation magnetohydrodynamics simulation. We found that the magnetic flux is largely removed by magnetic diffusion in the first core phase and that the plasma $β$ of the centre of the first core becomes large, $β>10^4$. Thus, proper treatment of first core phase is crucial in investigating the formation of protostar and disc. On the other hand, in an ideal simulation, $β\sim 10$ at the centre of the first core. The simulations with magnetic diffusion show that the circumstellar disc forms at almost the same time of protostar formation even with a relatively strong initial magnetic field (the value for the initial mass-to-flux ratio of the cloud core relative to the critical value is $μ=4$). The disc has a radius of $r \sim 1$ AU at the protostar formation epoch. We confirm that the disc is rotationally supported. We also show that the disc is massive ($Q\sim 1$) and that gravitational instability may play an important role in the subsequent disc evolution.

astro-ph.SR↗

arXiv2015

Accretion Phase of Star Formation in Clouds with Different Metallicities

The main accretion phase of star formation is investigated in clouds with different metallicities in the range of 0 \le Z \le Z_\odot, resolving the protostellar radius. Starting from a near-equilibrium prestellar cloud, we calculate the cloud evolution up to \sim100 yr after the first protostar formation. The star formation process considerably differs between clouds with lower (Z \le 10^-4 Z_\odot) and higher (Z > 10^-4 Z_\odot) metallicities. Fragmentation frequently occurs and many protostars appear without forming a stable circumstellar disc in lower-metallicity clouds. In these clouds, although protostars mutually interact and some are ejected from the cloud centre, many remain as a small stellar cluster. In contrast, higher-metallicity clouds produce a single protostar surrounded by a nearly stable rotation-supported disc. In these clouds, although fragmentation occasionally occurs in the disc, the fragments migrate inwards and finally fall onto the central protostar. The difference in cloud evolution is due to different thermal evolutions and mass accretion rates. The thermal evolution of the cloud determines the emergence and lifetime of the first core. The first core develops prior to the protostar formation in higher-metallicity clouds, whereas no (obvious) first core appears in lower-metallicity clouds. The first core evolves into a circumstellar disc with a spiral pattern, which effectively transfers the angular momentum outwards and suppresses frequent fragmentation. In lower-metallicity clouds, the higher mass accretion rate increases the disc surface density within a very short time, rendering the disc unstable to self-gravity and inducing vigorous fragmentation.

astro-ph.SR↗

arXiv2015

Radiation Magnetohydrodynamic Simulations of Protostellar Collapse: Non-Ideal Magnetohydrodynamic Effects and Early Formation of Circumstellar Disks

The transport of angular momentum by magnetic fields is a crucial physical process in formation and evolution of stars and disks. Because the ionization degree in star forming clouds is extremely low, non-ideal magnetohydrodynamic (MHD) effects such as ambipolar diffusion and Ohmic dissipation work strongly during protostellar collapse. These effects have significant impacts in the early phase of star formation as they redistribute magnetic flux and suppress angular momentum transport by magnetic fields. We perform three-dimensional nested-grid radiation magnetohydrodynamic (RMHD) simulations including Ohmic dissipation and ambipolar diffusion. Without these effects, magnetic fields transport angular momentum so efficiently that no rotationally supported disk is formed even after the second collapse. Ohmic dissipation works only in a relatively high density region within the first core and suppresses angular momentum transport, enabling formation of a very small rotationally supported disk after the second collapse. With both Ohmic dissipation and ambipolar diffusion, these effects work effectively in almost the entire region within the first core and significant magnetic flux loss occurs. As a result, a rotationally supported disk is formed even before a protostellar core forms. The size of the disk is still small, about 5 AU at the end of the first core phase, but this disk will grow later as gas accretion continues. Thus the non-ideal MHD effects can resolve the so-called magnetic braking catastrophe while maintaining the disk size small in the early phase, which is implied from recent interferometric observations.

astro-ph.SR↗

arXiv2014

Protostellar Jets Enclosed by Low-velocity Outflows

A protostellar jet and outflow are calculated for \sim 270 yr following the protostar formation using a three dimensional magnetohydrodynamics simulation, in which both the protostar and its parent cloud are spatially resolved. A high-velocity (\sim100km/s) jet with good collimation is driven near the disk's inner edge, while a low-velocity (<10km/s) outflow with a wide opening angle appears in the outer-disk region. The high-velocity jet propagates into the low-velocity outflow, forming a nested velocity structure in which a narrow high-velocity flow is enclosed by a wide low-velocity flow. The low-velocity outflow is in a nearly steady state, while the high-velocity jet appears intermittently. The time-variability of the jet is related to the episodic accretion from the disk onto the protostar, which is caused by gravitational instability and magnetic effects such as magnetic braking and magnetorotational instability. Although the high-velocity jet has a large kinetic energy, the mass and momentum of the jet are much smaller than those of the low-velocity outflow. A large fraction of the infalling gas is ejected by the low-velocity outflow. Thus, the low-velocity outflow actually has a more significant effect than the high-velocity jet in the very early phase of the star formation.

astro-ph.SR↗

arXiv2014

Effects of radiation transfer on the structure of self-gravitating disks, their fragmentation and evolution of the fragments

We investigate structure of self-gravitating disks, their fragmentation and evolution of the fragments (the clumps) using both analytic approach and three-dimensional radiation hydrodynamics simulations starting from molecular cores. The simulations show that non-local radiative transfer determines disk temperature. We find the disk structure is well described by an analytical model of quasi-steady self-gravitating disk with radial radiative transfer. Because the radiative process is not local and radiation from the interstellar medium cannot be ignored, the local radiative cooling would not be balanced with the viscous heating in a massive disk around a low mass star. In our simulations, there are cases in which the disk does not fragment even though it satisfies the fragmentation criterion based on disk cooling time ($Q \sim 1$ and $Ωt_{\rm cool}\sim 1$). This indicates that at least the criterion is not sufficient condition for fragmentation. We determine the parameter range for the host cloud core in which disk fragmentation occurs. In addition, we show that the temperature evolution of the center of the clump is close to that of typical first cores and the minimum initial mass of clumps to be about a few Jupiter mass.

astro-ph.SR↗

arXiv2014

Formation of a Keplerian disk in the infalling envelope around L1527 IRS: transformation from infalling motions to Kepler motions

We report Atacama Large Millimeter/submillimeter Array (ALMA) cycle 0 observations of C$^{18}$O ($J=2-1$), SO ($J_N= 6_5-5_4$) and 1.3mm dust continuum toward L1527 IRS, a class 0 solar-type protostar surrounded by an infalling and rotating envelope. C$^{18}$O emission shows strong redshifted absorption against the bright continuum emission associated with L1527 IRS, strongly suggesting infall motions in the C$^{18}$O envelope. The C$^{18}$O envelope also rotates with a velocity mostly proportional to $r^{-1}$, where $r$ is the radius, while the rotation profile at the innermost radius (54 AU) may be shallower than $r^{-1}$, suggestive of formation of a Keplerian disk around the central protostar of 0.3 Mo in dynamical mass. SO emission arising from the inner part of the C$^{18}$O envelope also shows rotation in the same direction as the C$^{18}$O envelope. The rotation is, however, rigid-body like which is very different from the differential rotation shown by C$^{18}$O. In order to explain the line profiles and the position-velocity (PV) diagrams of C$^{18}$O and SO observed, simple models composed of an infalling envelope surrounding a Keplerian disk of 54 AU in radius orbiting a star of 0.3 Mo are examined. It is found that in order to reproduce characteristic features of the observed line profiles and PV diagrams, the infall velocity in the model has to be smaller than the free-fall velocity yielded by a star of 0.3 Mo. Possible reasons for the reduced infall velocities are discussed.

astro-ph.GA↗

arXiv2014

ALMA Observations of Infalling Flows toward the Keplerian Disk around the Class I Protostar L1489 IRS

We have conducted ALMA observations in the 1.3 mm continuum and 12CO (2-1), C18O (2-1) and SO (5_6-4_5) lines toward L1489 IRS, a Class I protostar surrounded by a Keplerian disk and an infalling envelope. The Keplerian disk is clearly identified in the 12CO and C18O emission, and its outer radius (~700 AU) and mass (~0.005 Msun) are comparable to those of disks around T Tauri stars. The protostellar mass is estimated to be 1.6 Msun with the inclination angle of 66 deg. In addition to the Keplerian disk, there are blueshifted and redshifted off-axis protrusions seen in the C18O emission pointing toward the north and the south, respectively, adjunct to the middle part of the Keplerian disk. The shape and kinematics of these protrusions can be interpreted as streams of infalling flows with a conserved angular momentum following parabolic trajectories toward the Keplerian disk, and the mass infalling rate is estimated to be ~5E-7 Msun/yr. The specific angular momentum of the infalling flows (~2.5E-3 km/s*pc) is comparable to that at the outer radius of the Keplerian disk (~4.8E-3 km/s*pc). The SO emission is elongated along the disk major axis and exhibits a linear velocity gradient along the axis, which is interpreted as that the SO emission primarily traces a ring region in the flared Keplerian disk at radii of ~250-390 AU. The local enhancement of the SO abundance in the ring region can be due to the accretion shocks at the centrifugal radius where the infalling flows fall onto the disk. Our ALMA observations unveiled both the Keplerian disk and the infalling gas onto the disk, and the disk can further grow by accreting material and angular momenta from the infalling gas.

astro-ph.SR↗

arXiv2014

ALMA observations of a high-density core in Taurus: dynamical gas interaction at the possible site of a multiple star formation

Starless dense cores eventually collapse dynamically, which forms protostars inside them, and the physical properties of the cores determine the nature of the forming protostars. We report ALMA observations of dust continuum emission and molecular rotational lines toward MC27 or L1521F, which is considered to be very close to the first protostellar core phase. We found a few starless high-density cores, one of which has a very high density of ~10^7 cm^-3, within a region of several hundred AU around a very low-luminosity protostar detected by Spitzer. A very compact bipolar outflow with a dynamical timescale of a few hundred years was found toward the protostar. The molecular line observation shows several cores with an arc-like structure, possibly due to the dynamical gas interaction. These complex structures revealed in the present observations suggest that the initial condition of star formation is highly dynamical in nature, which is considered to be a key factor in understanding fundamental issues of star formation such as the formation of multiple stars and the origin of the initial mass function of stars.

astro-ph.SR↗

arXiv2014

Accretion of Solid Materials onto Circumplanetary Disks from Protoplanetary Disks

We investigate accretion of solid materials onto circumplanetary disks from heliocentric orbits rotating in protoplanetary disks, which is a key process for the formation of regular satellite systems. In the late stage of gas-capturing phase of giant planet formation, the accreting gas from protoplanetary disks forms circumplanetary disks. Since the accretion flow toward the circumplanetary disks affects the particle motion through gas drag force, we use hydrodynamic simulation data for the gas drag term to calculate the motion of solid materials. We consider wide range of size for the solid particles ($10^{-2}$-$10^6$m), and find that the accretion efficiency of the solid particles peaks around 10m-sized particles because energy dissipation of drag with circum-planetary disk gas in this size regime is most effective. The efficiency for particles larger than 10m size becomes lower because gas drag becomes less effective. For particles smaller than 10m, the efficiency is lower because the particles are strongly coupled with the back-ground gas flow, which prevent particles from accretion. We also find that the distance from the planet where the particles are captured by the circumplanetary disks is in a narrow range and well described as a function of the particle size.

astro-ph.EP↗

arXiv2013

Formation, orbital and thermal evolution, and survival of planetary-mass clumps in the early phase of circumstellar disk evolution

We report the results of our three-dimensional radiation hydrodynamics simulation of collapsing unmagnetized molecular cloud cores. We investigate the formation and evolution of the circumstellar disk and the clumps formed by disk fragmentation. Our simulation shows that disk fragmentation occurs in the early phase of circumstellar disk evolution and many clumps form. The clump can be represented by a polytrope sphere of index $n \sim 3$ and $n \gtrsim 4$ at central temperature $T_c \lesssim100$ K and $T_c \gtrsim 100$ K, respectively. We demonstrate, numerically and theoretically, that the maximum mass of the clump, beyond which it inevitably collapses, is $\sim 0.03 M_{\odot}$. The entropy of the clump increases during its evolution, implying that evolution is chiefly determined by mass accretion from the disk rather than by radiative cooling. Although most of the clumps rapidly migrate inward and finally fall onto the protostar, a few clumps remain in the disk. The central density and temperature of the surviving clump rapidly increase and the clump undergoes a second collapse within 1000 - 2000 years after its formation. In our simulation, three second cores of masses $0.2\msun$, $0.15\msun$, and $0.06\msun$ formed. These are protostars or brown dwarfs rather than protoplanets. For the clumps to survive as planetary-mass objects, the rapid mass accretion should be prevented by some mechanisms.

astro-ph.SR↗